[PATCH 3/3] usbnet: improve generic ethtool support

[Arnd Bergmann <arnd@arndb.de>]

This adds generic support for the ethtool commands get_settings,
set_settings, get_link and nway_reset to usbnet. These are now
implemented using mii functions when a low-level driver supports
mdio_read/mdio_write and does not override the usbnet ethtool
commands with its own.

Currently, this applies to the asix and the mcs7830 drivers.
I have tested it on mcs7830.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

---

Index: linux-cg/drivers/usb/net/asix.c
===================================================================
--- linux-cg.orig/drivers/usb/net/asix.c	2006-09-17 00:05:53.000000000 +0200
+++ linux-cg/drivers/usb/net/asix.c	2006-09-17 00:09:43.000000000 +0200
@@ -458,20 +458,6 @@
 	info->eedump_len = 0x3e;
 }
 
-static int asix_get_settings(struct net_device *net, struct ethtool_cmd *cmd)
-{
-	struct usbnet *dev = netdev_priv(net);
-
-	return mii_ethtool_gset(&dev->mii,cmd);
-}
-
-static int asix_set_settings(struct net_device *net, struct ethtool_cmd *cmd)
-{
-	struct usbnet *dev = netdev_priv(net);
-
-	return mii_ethtool_sset(&dev->mii,cmd);
-}
-
 /* We need to override some ethtool_ops so we require our
    own structure so we don't interfere with other usbnet
    devices that may be connected at the same time. */
@@ -484,8 +470,9 @@
 	.set_wol		= asix_set_wol,
 	.get_eeprom_len		= asix_get_eeprom_len,
 	.get_eeprom		= asix_get_eeprom,
-	.get_settings		= asix_get_settings,
-	.set_settings		= asix_set_settings,
+	.get_settings		= usbnet_get_settings,
+	.set_settings		= usbnet_set_settings,
+	.nway_reset		= usbnet_nway_reset,
 };
 
 static int asix_ioctl (struct net_device *net, struct ifreq *rq, int cmd)
@@ -564,8 +551,9 @@
 	.set_wol		= asix_set_wol,
 	.get_eeprom_len		= asix_get_eeprom_len,
 	.get_eeprom		= asix_get_eeprom,
-	.get_settings		= asix_get_settings,
-	.set_settings		= asix_set_settings,
+	.get_settings		= usbnet_get_settings,
+	.set_settings		= usbnet_set_settings,
+	.nway_reset		= usbnet_nway_reset,
 };
 
 static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
Index: linux-cg/drivers/usb/net/mcs7830.c
===================================================================
--- linux-cg.orig/drivers/usb/net/mcs7830.c	2006-09-17 00:05:53.000000000 +0200
+++ linux-cg/drivers/usb/net/mcs7830.c	2006-09-17 00:06:21.000000000 +0200
@@ -430,8 +430,12 @@
 	.get_regs		= mcs7830_get_regs,
 
 	/* common usbnet calls */
+	.get_link		= usbnet_get_link,
 	.get_msglevel		= usbnet_get_msglevel,
 	.set_msglevel		= usbnet_set_msglevel,
+	.get_settings		= usbnet_get_settings,
+	.set_settings		= usbnet_set_settings,
+	.nway_reset		= usbnet_nway_reset,
 };
 
 static int mcs7830_bind(struct usbnet *dev, struct usb_interface *udev)
Index: linux-cg/drivers/usb/net/usbnet.c
===================================================================
--- linux-cg.orig/drivers/usb/net/usbnet.c	2006-09-17 00:05:53.000000000 +0200
+++ linux-cg/drivers/usb/net/usbnet.c	2006-09-17 00:07:45.000000000 +0200
@@ -645,6 +645,29 @@
  * they'll probably want to use this base set.
  */
 
+int usbnet_get_settings (struct net_device *net, struct ethtool_cmd *cmd)
+{
+	struct usbnet *dev = netdev_priv(net);
+
+	if (!dev->mii.mdio_read)
+		return -EOPNOTSUPP;
+
+	return mii_ethtool_gset(&dev->mii, cmd);
+}
+EXPORT_SYMBOL_GPL(usbnet_get_settings);
+
+int usbnet_set_settings (struct net_device *net, struct ethtool_cmd *cmd)
+{
+	struct usbnet *dev = netdev_priv(net);
+
+	if (!dev->mii.mdio_write)
+		return -EOPNOTSUPP;
+
+	return mii_ethtool_sset(&dev->mii, cmd);
+}
+EXPORT_SYMBOL_GPL(usbnet_set_settings);
+
+
 void usbnet_get_drvinfo (struct net_device *net, struct ethtool_drvinfo *info)
 {
 	struct usbnet *dev = netdev_priv(net);
@@ -658,7 +681,7 @@
 }
 EXPORT_SYMBOL_GPL(usbnet_get_drvinfo);
 
-static u32 usbnet_get_link (struct net_device *net)
+u32 usbnet_get_link (struct net_device *net)
 {
 	struct usbnet *dev = netdev_priv(net);
 
@@ -666,9 +689,14 @@
 	if (dev->driver_info->check_connect)
 		return dev->driver_info->check_connect (dev) == 0;
 
+	/* if the device has mii operations, use those */
+	if (dev->mii.mdio_read)
+		return mii_link_ok(&dev->mii);
+
 	/* Otherwise, say we're up (to avoid breaking scripts) */
 	return 1;
 }
+EXPORT_SYMBOL_GPL(usbnet_get_link);
 
 u32 usbnet_get_msglevel (struct net_device *net)
 {
@@ -686,10 +714,24 @@
 }
 EXPORT_SYMBOL_GPL(usbnet_set_msglevel);
 
+int usbnet_nway_reset(struct net_device *net)
+{
+	struct usbnet *dev = netdev_priv(net);
+
+	if (!dev->mii.mdio_write)
+		return -EOPNOTSUPP;
+
+	return mii_nway_restart(&dev->mii);
+}
+EXPORT_SYMBOL_GPL(usbnet_nway_reset);
+
 /* drivers may override default ethtool_ops in their bind() routine */
 static struct ethtool_ops usbnet_ethtool_ops = {
+	.get_settings		= usbnet_get_settings,
+	.set_settings		= usbnet_set_settings,
 	.get_drvinfo		= usbnet_get_drvinfo,
 	.get_link		= usbnet_get_link,
+	.nway_reset		= usbnet_nway_reset,
 	.get_msglevel		= usbnet_get_msglevel,
 	.set_msglevel		= usbnet_set_msglevel,
 };
Index: linux-cg/drivers/usb/net/usbnet.h
===================================================================
--- linux-cg.orig/drivers/usb/net/usbnet.h	2006-09-17 00:05:53.000000000 +0200
+++ linux-cg/drivers/usb/net/usbnet.h	2006-09-17 00:07:53.000000000 +0200
@@ -167,9 +167,13 @@
 extern void usbnet_defer_kevent (struct usbnet *, int);
 extern void usbnet_skb_return (struct usbnet *, struct sk_buff *);
 
+extern int usbnet_get_settings (struct net_device *net, struct ethtool_cmd *cmd);
+extern int usbnet_set_settings (struct net_device *net, struct ethtool_cmd *cmd);
+extern u32 usbnet_get_link (struct net_device *net);
 extern u32 usbnet_get_msglevel (struct net_device *);
 extern void usbnet_set_msglevel (struct net_device *, u32);
 extern void usbnet_get_drvinfo (struct net_device *, struct ethtool_drvinfo *);
+extern int usbnet_nway_reset(struct net_device *net);
 
 /* messaging support includes the interface name, so it must not be
  * used before it has one ... notably, in minidriver bind() calls.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/