From: David Howells <[email protected]>
Make the FRV arch use the generic IRQ code rather than having its own routines
for doing so.
Signed-Off-By: David Howells <[email protected]>
---
arch/frv/Kconfig | 8
arch/frv/kernel/Makefile | 5
arch/frv/kernel/irq-mb93091.c | 157 +++++--
arch/frv/kernel/irq-mb93093.c | 115 +++--
arch/frv/kernel/irq-mb93493.c | 167 +++++---
arch/frv/kernel/irq-routing.c | 291 --------------
arch/frv/kernel/irq.c | 750 +++++------------------------------
arch/frv/kernel/setup.c | 1
arch/frv/kernel/time.c | 1
arch/frv/mb93090-mb00/pci-irq.c | 1
include/asm-frv/cpu-irqs.h | 54 +--
include/asm-frv/hardirq.h | 5
include/asm-frv/irq-routing.h | 70 ---
include/asm-frv/irq.h | 26 -
include/asm-frv/mb93091-fpga-irqs.h | 6
include/asm-frv/mb93093-fpga-irqs.h | 6
include/asm-frv/mb93493-irqs.h | 6
include/asm-frv/mb93493-regs.h | 2
18 files changed, 450 insertions(+), 1221 deletions(-)
diff --git a/arch/frv/Kconfig b/arch/frv/Kconfig
index 5e6583a..130fe8f 100644
--- a/arch/frv/Kconfig
+++ b/arch/frv/Kconfig
@@ -27,7 +27,7 @@ config GENERIC_CALIBRATE_DELAY
config GENERIC_HARDIRQS
bool
- default n
+ default y
config GENERIC_TIME
bool
@@ -259,6 +259,12 @@ config MB93091_NO_MB
endchoice
endif
+config FUJITSU_MB93493
+ bool "MB93493 Multimedia chip"
+ help
+ Select this option if the MB93493 multimedia chip is going to be
+ used.
+
choice
prompt "GP-Relative data support"
default GPREL_DATA_8
diff --git a/arch/frv/kernel/Makefile b/arch/frv/kernel/Makefile
index 91d380a..7c10cce 100644
--- a/arch/frv/kernel/Makefile
+++ b/arch/frv/kernel/Makefile
@@ -10,15 +10,14 @@ extra-y:= head.o init_task.o vmlinux.lds
obj-y := $(heads-y) entry.o entry-table.o break.o switch_to.o kernel_thread.o \
process.o traps.o ptrace.o signal.o dma.o \
sys_frv.o time.o semaphore.o setup.o frv_ksyms.o \
- debug-stub.o irq.o irq-routing.o sleep.o uaccess.o atomic-ops.o
+ debug-stub.o irq.o sleep.o uaccess.o atomic-ops.o
obj-$(CONFIG_GDBSTUB) += gdb-stub.o gdb-io.o
obj-$(CONFIG_MB93091_VDK) += irq-mb93091.o
-obj-$(CONFIG_MB93093_PDK) += irq-mb93093.o
-obj-$(CONFIG_FUJITSU_MB93493) += irq-mb93493.o
obj-$(CONFIG_PM) += pm.o cmode.o
obj-$(CONFIG_MB93093_PDK) += pm-mb93093.o
+obj-$(CONFIG_FUJITSU_MB93493) += irq-mb93493.o
obj-$(CONFIG_SYSCTL) += sysctl.o
obj-$(CONFIG_FUTEX) += futex.o
obj-$(CONFIG_MODULES) += module.o
diff --git a/arch/frv/kernel/irq-mb93091.c b/arch/frv/kernel/irq-mb93091.c
index 1381abc..635d234 100644
--- a/arch/frv/kernel/irq-mb93091.c
+++ b/arch/frv/kernel/irq-mb93091.c
@@ -24,7 +24,6 @@ #include <asm/bitops.h>
#include <asm/delay.h>
#include <asm/irq.h>
#include <asm/irc-regs.h>
-#include <asm/irq-routing.h>
#define __reg16(ADDR) (*(volatile unsigned short *)(ADDR))
@@ -33,83 +32,129 @@ #define __set_IMR(M) do { __reg16(0xffc0
#define __get_IFR() ({ __reg16(0xffc0000c); })
#define __clr_IFR(M) do { __reg16(0xffc0000c) = ~(M); wmb(); } while(0)
-static void frv_fpga_doirq(struct irq_source *source);
-static void frv_fpga_control(struct irq_group *group, int irq, int on);
-/*****************************************************************************/
/*
- * FPGA IRQ multiplexor
+ * on-motherboard FPGA PIC operations
*/
-static struct irq_source frv_fpga[4] = {
-#define __FPGA(X, M) \
- [X] = { \
- .muxname = "fpga."#X, \
- .irqmask = M, \
- .doirq = frv_fpga_doirq, \
- }
+static void frv_fpga_enable(unsigned int irq)
+{
+ uint16_t imr = __get_IMR();
- __FPGA(0, 0x0028),
- __FPGA(1, 0x0050),
- __FPGA(2, 0x1c00),
- __FPGA(3, 0x6386),
-};
-
-static struct irq_group frv_fpga_irqs = {
- .first_irq = IRQ_BASE_FPGA,
- .control = frv_fpga_control,
- .sources = {
- [ 1] = &frv_fpga[3],
- [ 2] = &frv_fpga[3],
- [ 3] = &frv_fpga[0],
- [ 4] = &frv_fpga[1],
- [ 5] = &frv_fpga[0],
- [ 6] = &frv_fpga[1],
- [ 7] = &frv_fpga[3],
- [ 8] = &frv_fpga[3],
- [ 9] = &frv_fpga[3],
- [10] = &frv_fpga[2],
- [11] = &frv_fpga[2],
- [12] = &frv_fpga[2],
- [13] = &frv_fpga[3],
- [14] = &frv_fpga[3],
- },
-};
+ imr &= ~(1 << (irq - IRQ_BASE_FPGA));
+ __set_IMR(imr);
+}
-static void frv_fpga_control(struct irq_group *group, int index, int on)
+static void frv_fpga_disable(unsigned int irq)
{
uint16_t imr = __get_IMR();
- if (on)
- imr &= ~(1 << index);
- else
- imr |= 1 << index;
+ imr |= 1 << (irq - IRQ_BASE_FPGA);
__set_IMR(imr);
}
-static void frv_fpga_doirq(struct irq_source *source)
+static void frv_fpga_ack(unsigned int irq)
+{
+ __clr_IFR(1 << (irq - IRQ_BASE_FPGA));
+}
+
+static void frv_fpga_end(unsigned int irq)
+{
+}
+
+static struct irq_chip frv_fpga_pic = {
+ .name = "mb93091",
+ .enable = frv_fpga_enable,
+ .disable = frv_fpga_disable,
+ .ack = frv_fpga_ack,
+ .mask = frv_fpga_disable,
+ .unmask = frv_fpga_enable,
+ .end = frv_fpga_end,
+};
+
+/*
+ * FPGA PIC interrupt handler
+ */
+static irqreturn_t fpga_interrupt(int irq, void *_mask, struct pt_regs *regs)
{
- uint16_t mask, imr;
+ uint16_t imr, mask = (unsigned long) _mask;
+ irqreturn_t iret = 0;
imr = __get_IMR();
- mask = source->irqmask & ~imr & __get_IFR();
- if (mask) {
- __set_IMR(imr | mask);
- __clr_IFR(mask);
- distribute_irqs(&frv_fpga_irqs, mask);
- __set_IMR(imr);
+ mask = mask & ~imr & __get_IFR();
+
+ /* poll all the triggered IRQs */
+ while (mask) {
+ int irq;
+
+ asm("scan %1,gr0,%0" : "=r"(irq) : "r"(mask));
+ irq = 31 - irq;
+ mask &= ~(1 << irq);
+
+ if (__do_IRQ(IRQ_BASE_FPGA + irq, regs))
+ iret |= IRQ_HANDLED;
}
+
+ return iret;
}
+/*
+ * define an interrupt action for each FPGA PIC output
+ * - use dev_id to indicate the FPGA PIC input to output mappings
+ */
+static struct irqaction fpga_irq[4] = {
+ [0] = {
+ .handler = fpga_interrupt,
+ .flags = IRQF_DISABLED | IRQF_SHARED,
+ .mask = CPU_MASK_NONE,
+ .name = "fpga.0",
+ .dev_id = (void *) 0x0028UL,
+ },
+ [1] = {
+ .handler = fpga_interrupt,
+ .flags = IRQF_DISABLED | IRQF_SHARED,
+ .mask = CPU_MASK_NONE,
+ .name = "fpga.1",
+ .dev_id = (void *) 0x0050UL,
+ },
+ [2] = {
+ .handler = fpga_interrupt,
+ .flags = IRQF_DISABLED | IRQF_SHARED,
+ .mask = CPU_MASK_NONE,
+ .name = "fpga.2",
+ .dev_id = (void *) 0x1c00UL,
+ },
+ [3] = {
+ .handler = fpga_interrupt,
+ .flags = IRQF_DISABLED | IRQF_SHARED,
+ .mask = CPU_MASK_NONE,
+ .name = "fpga.3",
+ .dev_id = (void *) 0x6386UL,
+ }
+};
+
+/*
+ * initialise the motherboard FPGA's PIC
+ */
void __init fpga_init(void)
{
+ int irq;
+
+ /* all PIC inputs are all set to be low-level driven, apart from the
+ * NMI button (15) which is fixed at falling-edge
+ */
__set_IMR(0x7ffe);
__clr_IFR(0x0000);
- frv_irq_route_external(&frv_fpga[0], IRQ_CPU_EXTERNAL0);
- frv_irq_route_external(&frv_fpga[1], IRQ_CPU_EXTERNAL1);
- frv_irq_route_external(&frv_fpga[2], IRQ_CPU_EXTERNAL2);
- frv_irq_route_external(&frv_fpga[3], IRQ_CPU_EXTERNAL3);
- frv_irq_set_group(&frv_fpga_irqs);
+ for (irq = IRQ_BASE_FPGA + 1; irq <= IRQ_BASE_FPGA + 14; irq++)
+ set_irq_chip_and_handler(irq, &frv_fpga_pic, handle_level_irq);
+
+ set_irq_chip_and_handler(IRQ_FPGA_NMI, &frv_fpga_pic, handle_edge_irq);
+
+ /* the FPGA drives the first four external IRQ inputs on the CPU PIC */
+ setup_irq(IRQ_CPU_EXTERNAL0, &fpga_irq[0]);
+ setup_irq(IRQ_CPU_EXTERNAL1, &fpga_irq[1]);
+ setup_irq(IRQ_CPU_EXTERNAL2, &fpga_irq[2]);
+ setup_irq(IRQ_CPU_EXTERNAL3, &fpga_irq[3]);
}
diff --git a/arch/frv/kernel/irq-mb93093.c b/arch/frv/kernel/irq-mb93093.c
index 48b2a64..f60db79 100644
--- a/arch/frv/kernel/irq-mb93093.c
+++ b/arch/frv/kernel/irq-mb93093.c
@@ -1,6 +1,6 @@
/* irq-mb93093.c: MB93093 FPGA interrupt handling
*
- * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Copyright (C) 2006 Red Hat, Inc. All Rights Reserved.
* Written by David Howells ([email protected])
*
* This program is free software; you can redistribute it and/or
@@ -24,7 +24,6 @@ #include <asm/bitops.h>
#include <asm/delay.h>
#include <asm/irq.h>
#include <asm/irc-regs.h>
-#include <asm/irq-routing.h>
#define __reg16(ADDR) (*(volatile unsigned short *)(__region_CS2 + (ADDR)))
@@ -33,66 +32,100 @@ #define __set_IMR(M) do { __reg16(0x0a)
#define __get_IFR() ({ __reg16(0x02); })
#define __clr_IFR(M) do { __reg16(0x02) = ~(M); wmb(); } while(0)
-static void frv_fpga_doirq(struct irq_source *source);
-static void frv_fpga_control(struct irq_group *group, int irq, int on);
-
-/*****************************************************************************/
/*
- * FPGA IRQ multiplexor
+ * off-CPU FPGA PIC operations
*/
-static struct irq_source frv_fpga[4] = {
-#define __FPGA(X, M) \
- [X] = { \
- .muxname = "fpga."#X, \
- .irqmask = M, \
- .doirq = frv_fpga_doirq, \
- }
-
- __FPGA(0, 0x0700),
-};
+static void frv_fpga_enable(unsigned int irq)
+{
+ uint16_t imr = __get_IMR();
-static struct irq_group frv_fpga_irqs = {
- .first_irq = IRQ_BASE_FPGA,
- .control = frv_fpga_control,
- .sources = {
- [ 8] = &frv_fpga[0],
- [ 9] = &frv_fpga[0],
- [10] = &frv_fpga[0],
- },
-};
+ imr &= ~(1 << (irq - IRQ_BASE_FPGA));
+ __set_IMR(imr);
+}
-static void frv_fpga_control(struct irq_group *group, int index, int on)
+static void frv_fpga_disable(unsigned int irq)
{
uint16_t imr = __get_IMR();
- if (on)
- imr &= ~(1 << index);
- else
- imr |= 1 << index;
+ imr |= 1 << (irq - IRQ_BASE_FPGA);
__set_IMR(imr);
}
-static void frv_fpga_doirq(struct irq_source *source)
+static void frv_fpga_ack(unsigned int irq)
+{
+ __clr_IFR(1 << (irq - IRQ_BASE_FPGA));
+}
+
+static void frv_fpga_end(unsigned int irq)
+{
+}
+
+static struct irq_chip frv_fpga_pic = {
+ .name = "mb93093",
+ .enable = frv_fpga_enable,
+ .disable = frv_fpga_disable,
+ .ack = frv_fpga_ack,
+ .mask = frv_fpga_disable,
+ .unmask = frv_fpga_enable,
+ .end = frv_fpga_end,
+};
+
+/*
+ * FPGA PIC interrupt handler
+ */
+static irqreturn_t fpga_interrupt(int irq, void *_mask, struct pt_regs *regs)
{
- uint16_t mask, imr;
+ uint16_t imr, mask = (unsigned long) _mask;
+ irqreturn_t iret = 0;
imr = __get_IMR();
- mask = source->irqmask & ~imr & __get_IFR();
- if (mask) {
- __set_IMR(imr | mask);
- __clr_IFR(mask);
- distribute_irqs(&frv_fpga_irqs, mask);
- __set_IMR(imr);
+ mask = mask & ~imr & __get_IFR();
+
+ /* poll all the triggered IRQs */
+ while (mask) {
+ int irq;
+
+ asm("scan %1,gr0,%0" : "=r"(irq) : "r"(mask));
+ irq = 31 - irq;
+ mask &= ~(1 << irq);
+
+ if (__do_IRQ(IRQ_BASE_FPGA + irq, regs))
+ iret |= IRQ_HANDLED;
}
+
+ return iret;
}
+/*
+ * define an interrupt action for each FPGA PIC output
+ * - use dev_id to indicate the FPGA PIC input to output mappings
+ */
+static struct irqaction fpga_irq[1] = {
+ [0] = {
+ .handler = fpga_interrupt,
+ .flags = IRQF_DISABLED,
+ .mask = CPU_MASK_NONE,
+ .name = "fpga.0",
+ .dev_id = (void *) 0x0700UL,
+ }
+};
+
+/*
+ * initialise the motherboard FPGA's PIC
+ */
void __init fpga_init(void)
{
+ int irq;
+
+ /* all PIC inputs are all set to be edge triggered */
__set_IMR(0x0700);
__clr_IFR(0x0000);
- frv_irq_route_external(&frv_fpga[0], IRQ_CPU_EXTERNAL2);
- frv_irq_set_group(&frv_fpga_irqs);
+ for (irq = IRQ_BASE_FPGA + 8; irq <= IRQ_BASE_FPGA + 10; irq++)
+ set_irq_chip_and_handler(irq, &frv_fpga_pic, handle_edge_irq);
+
+ /* the FPGA drives external IRQ input #2 on the CPU PIC */
+ setup_irq(IRQ_CPU_EXTERNAL2, &fpga_irq[0]);
}
diff --git a/arch/frv/kernel/irq-mb93493.c b/arch/frv/kernel/irq-mb93493.c
index 988d035..8ad9abf 100644
--- a/arch/frv/kernel/irq-mb93493.c
+++ b/arch/frv/kernel/irq-mb93493.c
@@ -1,6 +1,6 @@
/* irq-mb93493.c: MB93493 companion chip interrupt handler
*
- * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Copyright (C) 2006 Red Hat, Inc. All Rights Reserved.
* Written by David Howells ([email protected])
*
* This program is free software; you can redistribute it and/or
@@ -24,84 +24,133 @@ #include <asm/bitops.h>
#include <asm/delay.h>
#include <asm/irq.h>
#include <asm/irc-regs.h>
-#include <asm/irq-routing.h>
#include <asm/mb93493-irqs.h>
+#include <asm/mb93493-regs.h>
-static void frv_mb93493_doirq(struct irq_source *source);
+#define IRQ_ROUTE_ONE(X) (X##_ROUTE << (X - IRQ_BASE_MB93493))
+
+#define IRQ_ROUTING \
+ (IRQ_ROUTE_ONE(IRQ_MB93493_VDC) | \
+ IRQ_ROUTE_ONE(IRQ_MB93493_VCC) | \
+ IRQ_ROUTE_ONE(IRQ_MB93493_AUDIO_OUT) | \
+ IRQ_ROUTE_ONE(IRQ_MB93493_I2C_0) | \
+ IRQ_ROUTE_ONE(IRQ_MB93493_I2C_1) | \
+ IRQ_ROUTE_ONE(IRQ_MB93493_USB) | \
+ IRQ_ROUTE_ONE(IRQ_MB93493_LOCAL_BUS) | \
+ IRQ_ROUTE_ONE(IRQ_MB93493_PCMCIA) | \
+ IRQ_ROUTE_ONE(IRQ_MB93493_GPIO) | \
+ IRQ_ROUTE_ONE(IRQ_MB93493_AUDIO_IN))
-/*****************************************************************************/
/*
- * MB93493 companion chip IRQ multiplexor
+ * daughter board PIC operations
*/
-static struct irq_source frv_mb93493[2] = {
- [0] = {
- .muxname = "mb93493.0",
- .muxdata = __region_CS3 + 0x3d0,
- .doirq = frv_mb93493_doirq,
- .irqmask = 0x0000,
- },
- [1] = {
- .muxname = "mb93493.1",
- .muxdata = __region_CS3 + 0x3d4,
- .doirq = frv_mb93493_doirq,
- .irqmask = 0x0000,
- },
-};
-
-static void frv_mb93493_control(struct irq_group *group, int index, int on)
+static void frv_mb93493_enable(unsigned int irq)
{
- struct irq_source *source;
uint32_t iqsr;
+ volatile void *piqsr;
- if ((frv_mb93493[0].irqmask & (1 << index)))
- source = &frv_mb93493[0];
+ if (IRQ_ROUTING & (1 << (irq - IRQ_BASE_MB93493)))
+ piqsr = __addr_MB93493_IQSR(1);
else
- source = &frv_mb93493[1];
+ piqsr = __addr_MB93493_IQSR(0);
- iqsr = readl(source->muxdata);
- if (on)
- iqsr |= 1 << (index + 16);
+ iqsr = readl(piqsr);
+ iqsr |= 1 << (irq - IRQ_BASE_MB93493 + 16);
+ writel(iqsr, piqsr);
+}
+
+static void frv_mb93493_disable(unsigned int irq)
+{
+ uint32_t iqsr;
+ volatile void *piqsr;
+
+ if (IRQ_ROUTING & (1 << (irq - IRQ_BASE_MB93493)))
+ piqsr = __addr_MB93493_IQSR(1);
else
- iqsr &= ~(1 << (index + 16));
+ piqsr = __addr_MB93493_IQSR(0);
- writel(iqsr, source->muxdata);
+ iqsr = readl(piqsr);
+ iqsr &= ~(1 << (irq - IRQ_BASE_MB93493 + 16));
+ writel(iqsr, piqsr);
}
-static struct irq_group frv_mb93493_irqs = {
- .first_irq = IRQ_BASE_MB93493,
- .control = frv_mb93493_control,
-};
-
-static void frv_mb93493_doirq(struct irq_source *source)
+static void frv_mb93493_ack(unsigned int irq)
{
- uint32_t mask = readl(source->muxdata);
- mask = mask & (mask >> 16) & 0xffff;
+}
- if (mask)
- distribute_irqs(&frv_mb93493_irqs, mask);
+static void frv_mb93493_end(unsigned int irq)
+{
}
-static void __init mb93493_irq_route(int irq, int source)
+static struct irq_chip frv_mb93493_pic = {
+ .name = "mb93093",
+ .enable = frv_mb93493_enable,
+ .disable = frv_mb93493_disable,
+ .ack = frv_mb93493_ack,
+ .mask = frv_mb93493_disable,
+ .unmask = frv_mb93493_enable,
+ .end = frv_mb93493_end,
+};
+
+/*
+ * MB93493 PIC interrupt handler
+ */
+static irqreturn_t mb93493_interrupt(int irq, void *_piqsr, struct pt_regs *regs)
{
- frv_mb93493[source].irqmask |= 1 << (irq - IRQ_BASE_MB93493);
- frv_mb93493_irqs.sources[irq - IRQ_BASE_MB93493] = &frv_mb93493[source];
+ volatile void *piqsr = _piqsr;
+ irqreturn_t iret = 0;
+ uint32_t iqsr;
+
+ iqsr = readl(piqsr);
+ iqsr = iqsr & (iqsr >> 16) & 0xffff;
+
+ /* poll all the triggered IRQs */
+ while (iqsr) {
+ int irq;
+
+ asm("scan %1,gr0,%0" : "=r"(irq) : "r"(iqsr));
+ irq = 31 - irq;
+ iqsr &= ~(1 << irq);
+
+ if (__do_IRQ(IRQ_BASE_MB93493 + irq, regs))
+ iret |= IRQ_HANDLED;
+ }
+
+ return iret;
}
-void __init route_mb93493_irqs(void)
+/*
+ * define an interrupt action for each MB93493 PIC output
+ * - use dev_id to indicate the MB93493 PIC input to output mappings
+ */
+static struct irqaction mb93493_irq[2] = {
+ [0] = {
+ .handler = mb93493_interrupt,
+ .flags = IRQF_DISABLED | IRQF_SHARED,
+ .mask = CPU_MASK_NONE,
+ .name = "mb93493.0",
+ .dev_id = (void *) __addr_MB93493_IQSR(0),
+ },
+ [1] = {
+ .handler = mb93493_interrupt,
+ .flags = IRQF_DISABLED | IRQF_SHARED,
+ .mask = CPU_MASK_NONE,
+ .name = "mb93493.1",
+ .dev_id = (void *) __addr_MB93493_IQSR(1),
+ }
+};
+
+/*
+ * initialise the motherboard MB93493's PIC
+ */
+void __init mb93493_init(void)
{
- frv_irq_route_external(&frv_mb93493[0], IRQ_CPU_MB93493_0);
- frv_irq_route_external(&frv_mb93493[1], IRQ_CPU_MB93493_1);
-
- frv_irq_set_group(&frv_mb93493_irqs);
-
- mb93493_irq_route(IRQ_MB93493_VDC, IRQ_MB93493_VDC_ROUTE);
- mb93493_irq_route(IRQ_MB93493_VCC, IRQ_MB93493_VCC_ROUTE);
- mb93493_irq_route(IRQ_MB93493_AUDIO_IN, IRQ_MB93493_AUDIO_IN_ROUTE);
- mb93493_irq_route(IRQ_MB93493_I2C_0, IRQ_MB93493_I2C_0_ROUTE);
- mb93493_irq_route(IRQ_MB93493_I2C_1, IRQ_MB93493_I2C_1_ROUTE);
- mb93493_irq_route(IRQ_MB93493_USB, IRQ_MB93493_USB_ROUTE);
- mb93493_irq_route(IRQ_MB93493_LOCAL_BUS, IRQ_MB93493_LOCAL_BUS_ROUTE);
- mb93493_irq_route(IRQ_MB93493_PCMCIA, IRQ_MB93493_PCMCIA_ROUTE);
- mb93493_irq_route(IRQ_MB93493_GPIO, IRQ_MB93493_GPIO_ROUTE);
- mb93493_irq_route(IRQ_MB93493_AUDIO_OUT, IRQ_MB93493_AUDIO_OUT_ROUTE);
+ int irq;
+
+ for (irq = IRQ_BASE_MB93493 + 0; irq <= IRQ_BASE_MB93493 + 10; irq++)
+ set_irq_chip_and_handler(irq, &frv_mb93493_pic, handle_edge_irq);
+
+ /* the MB93493 drives external IRQ inputs on the CPU PIC */
+ setup_irq(IRQ_CPU_MB93493_0, &mb93493_irq[0]);
+ setup_irq(IRQ_CPU_MB93493_1, &mb93493_irq[1]);
}
diff --git a/arch/frv/kernel/irq-routing.c b/arch/frv/kernel/irq-routing.c
deleted file mode 100644
index 53886ad..0000000
--- a/arch/frv/kernel/irq-routing.c
+++ /dev/null
@@ -1,291 +0,0 @@
-/* irq-routing.c: IRQ routing
- *
- * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells ([email protected])
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/sched.h>
-#include <linux/random.h>
-#include <linux/init.h>
-#include <linux/serial_reg.h>
-#include <asm/io.h>
-#include <asm/irq-routing.h>
-#include <asm/irc-regs.h>
-#include <asm/serial-regs.h>
-#include <asm/dma.h>
-
-struct irq_level frv_irq_levels[16] = {
- [0 ... 15] = {
- .lock = SPIN_LOCK_UNLOCKED,
- }
-};
-
-struct irq_group *irq_groups[NR_IRQ_GROUPS];
-
-extern struct irq_group frv_cpu_irqs;
-
-void __init frv_irq_route(struct irq_source *source, int irqlevel)
-{
- source->level = &frv_irq_levels[irqlevel];
- source->next = frv_irq_levels[irqlevel].sources;
- frv_irq_levels[irqlevel].sources = source;
-}
-
-void __init frv_irq_route_external(struct irq_source *source, int irq)
-{
- int irqlevel = 0;
-
- switch (irq) {
- case IRQ_CPU_EXTERNAL0: irqlevel = IRQ_XIRQ0_LEVEL; break;
- case IRQ_CPU_EXTERNAL1: irqlevel = IRQ_XIRQ1_LEVEL; break;
- case IRQ_CPU_EXTERNAL2: irqlevel = IRQ_XIRQ2_LEVEL; break;
- case IRQ_CPU_EXTERNAL3: irqlevel = IRQ_XIRQ3_LEVEL; break;
- case IRQ_CPU_EXTERNAL4: irqlevel = IRQ_XIRQ4_LEVEL; break;
- case IRQ_CPU_EXTERNAL5: irqlevel = IRQ_XIRQ5_LEVEL; break;
- case IRQ_CPU_EXTERNAL6: irqlevel = IRQ_XIRQ6_LEVEL; break;
- case IRQ_CPU_EXTERNAL7: irqlevel = IRQ_XIRQ7_LEVEL; break;
- default: BUG();
- }
-
- source->level = &frv_irq_levels[irqlevel];
- source->next = frv_irq_levels[irqlevel].sources;
- frv_irq_levels[irqlevel].sources = source;
-}
-
-void __init frv_irq_set_group(struct irq_group *group)
-{
- irq_groups[group->first_irq >> NR_IRQ_LOG2_ACTIONS_PER_GROUP] = group;
-}
-
-void distribute_irqs(struct irq_group *group, unsigned long irqmask)
-{
- struct irqaction *action;
- int irq;
-
- while (irqmask) {
- asm("scan %1,gr0,%0" : "=r"(irq) : "r"(irqmask));
- if (irq < 0 || irq > 31)
- asm volatile("break");
- irq = 31 - irq;
-
- irqmask &= ~(1 << irq);
- action = group->actions[irq];
-
- irq += group->first_irq;
-
- if (action) {
- int status = 0;
-
-// if (!(action->flags & IRQF_DISABLED))
-// local_irq_enable();
-
- do {
- status |= action->flags;
- action->handler(irq, action->dev_id, __frame);
- action = action->next;
- } while (action);
-
- if (status & IRQF_SAMPLE_RANDOM)
- add_interrupt_randomness(irq);
- local_irq_disable();
- }
- }
-}
-
-/*****************************************************************************/
-/*
- * CPU UART interrupts
- */
-static void frv_cpuuart_doirq(struct irq_source *source)
-{
-// uint8_t iir = readb(source->muxdata + UART_IIR * 8);
-// if ((iir & 0x0f) != UART_IIR_NO_INT)
- distribute_irqs(&frv_cpu_irqs, source->irqmask);
-}
-
-struct irq_source frv_cpuuart[2] = {
-#define __CPUUART(X, A) \
- [X] = { \
- .muxname = "uart", \
- .muxdata = (volatile void __iomem *)(unsigned long)A,\
- .irqmask = 1 << IRQ_CPU_UART##X, \
- .doirq = frv_cpuuart_doirq, \
- }
-
- __CPUUART(0, UART0_BASE),
- __CPUUART(1, UART1_BASE),
-};
-
-/*****************************************************************************/
-/*
- * CPU DMA interrupts
- */
-static void frv_cpudma_doirq(struct irq_source *source)
-{
- uint32_t cstr = readl(source->muxdata + DMAC_CSTRx);
- if (cstr & DMAC_CSTRx_INT)
- distribute_irqs(&frv_cpu_irqs, source->irqmask);
-}
-
-struct irq_source frv_cpudma[8] = {
-#define __CPUDMA(X, A) \
- [X] = { \
- .muxname = "dma", \
- .muxdata = (volatile void __iomem *)(unsigned long)A,\
- .irqmask = 1 << IRQ_CPU_DMA##X, \
- .doirq = frv_cpudma_doirq, \
- }
-
- __CPUDMA(0, 0xfe000900),
- __CPUDMA(1, 0xfe000980),
- __CPUDMA(2, 0xfe000a00),
- __CPUDMA(3, 0xfe000a80),
- __CPUDMA(4, 0xfe001000),
- __CPUDMA(5, 0xfe001080),
- __CPUDMA(6, 0xfe001100),
- __CPUDMA(7, 0xfe001180),
-};
-
-/*****************************************************************************/
-/*
- * CPU timer interrupts - can't tell whether they've generated an interrupt or not
- */
-static void frv_cputimer_doirq(struct irq_source *source)
-{
- distribute_irqs(&frv_cpu_irqs, source->irqmask);
-}
-
-struct irq_source frv_cputimer[3] = {
-#define __CPUTIMER(X) \
- [X] = { \
- .muxname = "timer", \
- .muxdata = NULL, \
- .irqmask = 1 << IRQ_CPU_TIMER##X, \
- .doirq = frv_cputimer_doirq, \
- }
-
- __CPUTIMER(0),
- __CPUTIMER(1),
- __CPUTIMER(2),
-};
-
-/*****************************************************************************/
-/*
- * external CPU interrupts - can't tell directly whether they've generated an interrupt or not
- */
-static void frv_cpuexternal_doirq(struct irq_source *source)
-{
- distribute_irqs(&frv_cpu_irqs, source->irqmask);
-}
-
-struct irq_source frv_cpuexternal[8] = {
-#define __CPUEXTERNAL(X) \
- [X] = { \
- .muxname = "ext", \
- .muxdata = NULL, \
- .irqmask = 1 << IRQ_CPU_EXTERNAL##X, \
- .doirq = frv_cpuexternal_doirq, \
- }
-
- __CPUEXTERNAL(0),
- __CPUEXTERNAL(1),
- __CPUEXTERNAL(2),
- __CPUEXTERNAL(3),
- __CPUEXTERNAL(4),
- __CPUEXTERNAL(5),
- __CPUEXTERNAL(6),
- __CPUEXTERNAL(7),
-};
-
-#define set_IRR(N,A,B,C,D) __set_IRR(N, (A << 28) | (B << 24) | (C << 20) | (D << 16))
-
-struct irq_group frv_cpu_irqs = {
- .sources = {
- [IRQ_CPU_UART0] = &frv_cpuuart[0],
- [IRQ_CPU_UART1] = &frv_cpuuart[1],
- [IRQ_CPU_TIMER0] = &frv_cputimer[0],
- [IRQ_CPU_TIMER1] = &frv_cputimer[1],
- [IRQ_CPU_TIMER2] = &frv_cputimer[2],
- [IRQ_CPU_DMA0] = &frv_cpudma[0],
- [IRQ_CPU_DMA1] = &frv_cpudma[1],
- [IRQ_CPU_DMA2] = &frv_cpudma[2],
- [IRQ_CPU_DMA3] = &frv_cpudma[3],
- [IRQ_CPU_DMA4] = &frv_cpudma[4],
- [IRQ_CPU_DMA5] = &frv_cpudma[5],
- [IRQ_CPU_DMA6] = &frv_cpudma[6],
- [IRQ_CPU_DMA7] = &frv_cpudma[7],
- [IRQ_CPU_EXTERNAL0] = &frv_cpuexternal[0],
- [IRQ_CPU_EXTERNAL1] = &frv_cpuexternal[1],
- [IRQ_CPU_EXTERNAL2] = &frv_cpuexternal[2],
- [IRQ_CPU_EXTERNAL3] = &frv_cpuexternal[3],
- [IRQ_CPU_EXTERNAL4] = &frv_cpuexternal[4],
- [IRQ_CPU_EXTERNAL5] = &frv_cpuexternal[5],
- [IRQ_CPU_EXTERNAL6] = &frv_cpuexternal[6],
- [IRQ_CPU_EXTERNAL7] = &frv_cpuexternal[7],
- },
-};
-
-/*****************************************************************************/
-/*
- * route the CPU's interrupt sources
- */
-void __init route_cpu_irqs(void)
-{
- frv_irq_set_group(&frv_cpu_irqs);
-
- __set_IITMR(0, 0x003f0000); /* DMA0-3, TIMER0-2 IRQ detect levels */
- __set_IITMR(1, 0x20000000); /* ERR0-1, UART0-1, DMA4-7 IRQ detect levels */
-
- /* route UART and error interrupts */
- frv_irq_route(&frv_cpuuart[0], IRQ_UART0_LEVEL);
- frv_irq_route(&frv_cpuuart[1], IRQ_UART1_LEVEL);
-
- set_IRR(6, IRQ_GDBSTUB_LEVEL, IRQ_GDBSTUB_LEVEL, IRQ_UART1_LEVEL, IRQ_UART0_LEVEL);
-
- /* route DMA channel interrupts */
- frv_irq_route(&frv_cpudma[0], IRQ_DMA0_LEVEL);
- frv_irq_route(&frv_cpudma[1], IRQ_DMA1_LEVEL);
- frv_irq_route(&frv_cpudma[2], IRQ_DMA2_LEVEL);
- frv_irq_route(&frv_cpudma[3], IRQ_DMA3_LEVEL);
- frv_irq_route(&frv_cpudma[4], IRQ_DMA4_LEVEL);
- frv_irq_route(&frv_cpudma[5], IRQ_DMA5_LEVEL);
- frv_irq_route(&frv_cpudma[6], IRQ_DMA6_LEVEL);
- frv_irq_route(&frv_cpudma[7], IRQ_DMA7_LEVEL);
-
- set_IRR(4, IRQ_DMA3_LEVEL, IRQ_DMA2_LEVEL, IRQ_DMA1_LEVEL, IRQ_DMA0_LEVEL);
- set_IRR(7, IRQ_DMA7_LEVEL, IRQ_DMA6_LEVEL, IRQ_DMA5_LEVEL, IRQ_DMA4_LEVEL);
-
- /* route timer interrupts */
- frv_irq_route(&frv_cputimer[0], IRQ_TIMER0_LEVEL);
- frv_irq_route(&frv_cputimer[1], IRQ_TIMER1_LEVEL);
- frv_irq_route(&frv_cputimer[2], IRQ_TIMER2_LEVEL);
-
- set_IRR(5, 0, IRQ_TIMER2_LEVEL, IRQ_TIMER1_LEVEL, IRQ_TIMER0_LEVEL);
-
- /* route external interrupts */
- frv_irq_route(&frv_cpuexternal[0], IRQ_XIRQ0_LEVEL);
- frv_irq_route(&frv_cpuexternal[1], IRQ_XIRQ1_LEVEL);
- frv_irq_route(&frv_cpuexternal[2], IRQ_XIRQ2_LEVEL);
- frv_irq_route(&frv_cpuexternal[3], IRQ_XIRQ3_LEVEL);
- frv_irq_route(&frv_cpuexternal[4], IRQ_XIRQ4_LEVEL);
- frv_irq_route(&frv_cpuexternal[5], IRQ_XIRQ5_LEVEL);
- frv_irq_route(&frv_cpuexternal[6], IRQ_XIRQ6_LEVEL);
- frv_irq_route(&frv_cpuexternal[7], IRQ_XIRQ7_LEVEL);
-
- set_IRR(2, IRQ_XIRQ7_LEVEL, IRQ_XIRQ6_LEVEL, IRQ_XIRQ5_LEVEL, IRQ_XIRQ4_LEVEL);
- set_IRR(3, IRQ_XIRQ3_LEVEL, IRQ_XIRQ2_LEVEL, IRQ_XIRQ1_LEVEL, IRQ_XIRQ0_LEVEL);
-
-#if defined(CONFIG_MB93091_VDK)
- __set_TM1(0x55550000); /* XIRQ7-0 all active low */
-#elif defined(CONFIG_MB93093_PDK)
- __set_TM1(0x15550000); /* XIRQ7 active high, 6-0 all active low */
-#else
-#error dont know external IRQ trigger levels for this setup
-#endif
-
-} /* end route_cpu_irqs() */
diff --git a/arch/frv/kernel/irq.c b/arch/frv/kernel/irq.c
index 0896701..e1ab9f2 100644
--- a/arch/frv/kernel/irq.c
+++ b/arch/frv/kernel/irq.c
@@ -1,6 +1,6 @@
/* irq.c: FRV IRQ handling
*
- * Copyright (C) 2003, 2004 Red Hat, Inc. All Rights Reserved.
+ * Copyright (C) 2003, 2004, 2006 Red Hat, Inc. All Rights Reserved.
* Written by David Howells ([email protected])
*
* This program is free software; you can redistribute it and/or
@@ -9,13 +9,6 @@
* 2 of the License, or (at your option) any later version.
*/
-/*
- * (mostly architecture independent, will move to kernel/irq.c in 2.5.)
- *
- * IRQs are in fact implemented a bit like signal handlers for the kernel.
- * Naturally it's not a 1:1 relation, but there are similarities.
- */
-
#include <linux/ptrace.h>
#include <linux/errno.h>
#include <linux/signal.h>
@@ -43,19 +36,16 @@ #include <asm/pgalloc.h>
#include <asm/delay.h>
#include <asm/irq.h>
#include <asm/irc-regs.h>
-#include <asm/irq-routing.h>
#include <asm/gdb-stub.h>
-extern void __init fpga_init(void);
-extern void __init route_mb93493_irqs(void);
-
-static void register_irq_proc (unsigned int irq);
+#define set_IRR(N,A,B,C,D) __set_IRR(N, (A << 28) | (B << 24) | (C << 20) | (D << 16))
-/*
- * Special irq handlers.
- */
+extern void __init fpga_init(void);
+#ifdef CONFIG_FUJITSU_MB93493
+extern void __init mb93493_init(void);
+#endif
-irqreturn_t no_action(int cpl, void *dev_id, struct pt_regs *regs) { return IRQ_HANDLED; }
+#define __reg16(ADDR) (*(volatile unsigned short *)(ADDR))
atomic_t irq_err_count;
@@ -64,215 +54,99 @@ atomic_t irq_err_count;
*/
int show_interrupts(struct seq_file *p, void *v)
{
- struct irqaction *action;
- struct irq_group *group;
+ int i = *(loff_t *) v, cpu;
+ struct irqaction * action;
unsigned long flags;
- int level, grp, ix, i, j;
-
- i = *(loff_t *) v;
-
- switch (i) {
- case 0:
- seq_printf(p, " ");
- for_each_online_cpu(j)
- seq_printf(p, "CPU%d ",j);
-
- seq_putc(p, '\n');
- break;
- case 1 ... NR_IRQ_GROUPS * NR_IRQ_ACTIONS_PER_GROUP:
- local_irq_save(flags);
-
- grp = (i - 1) / NR_IRQ_ACTIONS_PER_GROUP;
- group = irq_groups[grp];
- if (!group)
- goto skip;
-
- ix = (i - 1) % NR_IRQ_ACTIONS_PER_GROUP;
- action = group->actions[ix];
- if (!action)
- goto skip;
-
- seq_printf(p, "%3d: ", i - 1);
-
-#ifndef CONFIG_SMP
- seq_printf(p, "%10u ", kstat_irqs(i));
-#else
- for_each_online_cpu(j)
- seq_printf(p, "%10u ", kstat_cpu(j).irqs[i - 1]);
-#endif
-
- level = group->sources[ix]->level - frv_irq_levels;
-
- seq_printf(p, " %12s@%x", group->sources[ix]->muxname, level);
- seq_printf(p, " %s", action->name);
-
- for (action = action->next; action; action = action->next)
- seq_printf(p, ", %s", action->name);
+ if (i == 0) {
+ char cpuname[12];
+ seq_printf(p, " ");
+ for_each_present_cpu(cpu) {
+ sprintf(cpuname, "CPU%d", cpu);
+ seq_printf(p, " %10s", cpuname);
+ }
seq_putc(p, '\n');
-skip:
- local_irq_restore(flags);
- break;
+ }
- case NR_IRQ_GROUPS * NR_IRQ_ACTIONS_PER_GROUP + 1:
- seq_printf(p, "ERR: %10u\n", atomic_read(&irq_err_count));
- break;
+ if (i < NR_IRQS) {
+ spin_lock_irqsave(&irq_desc[i].lock, flags);
+ action = irq_desc[i].action;
+ if (action) {
+ seq_printf(p, "%3d: ", i);
+ for_each_present_cpu(cpu)
+ seq_printf(p, "%10u ", kstat_cpu(cpu).irqs[i]);
+ seq_printf(p, " %10s", irq_desc[i].chip->name ? : "-");
+ seq_printf(p, " %s", action->name);
+ for (action = action->next;
+ action;
+ action = action->next)
+ seq_printf(p, ", %s", action->name);
+
+ seq_putc(p, '\n');
+ }
- default:
- break;
+ spin_unlock_irqrestore(&irq_desc[i].lock, flags);
+ } else if (i == NR_IRQS) {
+ seq_printf(p, "Err: %10u\n", atomic_read(&irq_err_count));
}
return 0;
}
-
/*
- * Generic enable/disable code: this just calls
- * down into the PIC-specific version for the actual
- * hardware disable after having gotten the irq
- * controller lock.
+ * on-CPU PIC operations
*/
-
-/**
- * disable_irq_nosync - disable an irq without waiting
- * @irq: Interrupt to disable
- *
- * Disable the selected interrupt line. Disables and Enables are
- * nested.
- * Unlike disable_irq(), this function does not ensure existing
- * instances of the IRQ handler have completed before returning.
- *
- * This function may be called from IRQ context.
- */
-
-void disable_irq_nosync(unsigned int irq)
+static void frv_cpupic_enable(unsigned int irqlevel)
{
- struct irq_source *source;
- struct irq_group *group;
- struct irq_level *level;
- unsigned long flags;
- int idx = irq & (NR_IRQ_ACTIONS_PER_GROUP - 1);
-
- group = irq_groups[irq >> NR_IRQ_LOG2_ACTIONS_PER_GROUP];
- if (!group)
- BUG();
-
- source = group->sources[idx];
- if (!source)
- BUG();
-
- level = source->level;
-
- spin_lock_irqsave(&level->lock, flags);
-
- if (group->control) {
- if (!group->disable_cnt[idx]++)
- group->control(group, idx, 0);
- } else if (!level->disable_count++) {
- __set_MASK(level - frv_irq_levels);
- }
-
- spin_unlock_irqrestore(&level->lock, flags);
+ __clr_MASK(irqlevel);
}
-EXPORT_SYMBOL(disable_irq_nosync);
-
-/**
- * disable_irq - disable an irq and wait for completion
- * @irq: Interrupt to disable
- *
- * Disable the selected interrupt line. Enables and Disables are
- * nested.
- * This function waits for any pending IRQ handlers for this interrupt
- * to complete before returning. If you use this function while
- * holding a resource the IRQ handler may need you will deadlock.
- *
- * This function may be called - with care - from IRQ context.
- */
-
-void disable_irq(unsigned int irq)
+static void frv_cpupic_disable(unsigned int irqlevel)
{
- disable_irq_nosync(irq);
-
-#ifdef CONFIG_SMP
- if (!local_irq_count(smp_processor_id())) {
- do {
- barrier();
- } while (irq_desc[irq].status & IRQ_INPROGRESS);
- }
-#endif
+ __set_MASK(irqlevel);
}
-EXPORT_SYMBOL(disable_irq);
-
-/**
- * enable_irq - enable handling of an irq
- * @irq: Interrupt to enable
- *
- * Undoes the effect of one call to disable_irq(). If this
- * matches the last disable, processing of interrupts on this
- * IRQ line is re-enabled.
- *
- * This function may be called from IRQ context.
- */
-
-void enable_irq(unsigned int irq)
+static void frv_cpupic_ack(unsigned int irqlevel)
{
- struct irq_source *source;
- struct irq_group *group;
- struct irq_level *level;
- unsigned long flags;
- int idx = irq & (NR_IRQ_ACTIONS_PER_GROUP - 1);
- int count;
-
- group = irq_groups[irq >> NR_IRQ_LOG2_ACTIONS_PER_GROUP];
- if (!group)
- BUG();
-
- source = group->sources[idx];
- if (!source)
- BUG();
-
- level = source->level;
-
- spin_lock_irqsave(&level->lock, flags);
-
- if (group->control)
- count = group->disable_cnt[idx];
- else
- count = level->disable_count;
-
- switch (count) {
- case 1:
- if (group->control) {
- if (group->actions[idx])
- group->control(group, idx, 1);
- } else {
- if (level->usage)
- __clr_MASK(level - frv_irq_levels);
- }
- /* fall-through */
+ __set_MASK(irqlevel);
+ __clr_RC(irqlevel);
+ __clr_IRL();
+}
- default:
- count--;
- break;
+static void frv_cpupic_mask(unsigned int irqlevel)
+{
+ __set_MASK(irqlevel);
+}
- case 0:
- printk("enable_irq(%u) unbalanced from %p\n", irq, __builtin_return_address(0));
- }
+static void frv_cpupic_mask_ack(unsigned int irqlevel)
+{
+ __set_MASK(irqlevel);
+ __clr_RC(irqlevel);
+ __clr_IRL();
+}
- if (group->control)
- group->disable_cnt[idx] = count;
- else
- level->disable_count = count;
+static void frv_cpupic_unmask(unsigned int irqlevel)
+{
+ __clr_MASK(irqlevel);
+}
- spin_unlock_irqrestore(&level->lock, flags);
+static void frv_cpupic_end(unsigned int irqlevel)
+{
+ __clr_MASK(irqlevel);
}
-EXPORT_SYMBOL(enable_irq);
+static struct irq_chip frv_cpu_pic = {
+ .name = "cpu",
+ .enable = frv_cpupic_enable,
+ .disable = frv_cpupic_disable,
+ .ack = frv_cpupic_ack,
+ .mask = frv_cpupic_mask,
+ .mask_ack = frv_cpupic_mask_ack,
+ .unmask = frv_cpupic_unmask,
+ .end = frv_cpupic_end,
+};
-/*****************************************************************************/
/*
* handles all normal device IRQ's
* - registers are referred to by the __frame variable (GR28)
@@ -281,463 +155,65 @@ EXPORT_SYMBOL(enable_irq);
*/
asmlinkage void do_IRQ(void)
{
- struct irq_source *source;
- int level, cpu;
-
irq_enter();
-
- level = (__frame->tbr >> 4) & 0xf;
- cpu = smp_processor_id();
-
- if ((unsigned long) __frame - (unsigned long) (current + 1) < 512)
- BUG();
-
- __set_MASK(level);
- __clr_RC(level);
- __clr_IRL();
-
- kstat_this_cpu.irqs[level]++;
-
- for (source = frv_irq_levels[level].sources; source; source = source->next)
- source->doirq(source);
-
- __clr_MASK(level);
-
+ __do_IRQ(__get_IRL(), __frame);
irq_exit();
+}
-} /* end do_IRQ() */
-
-/*****************************************************************************/
/*
* handles all NMIs when not co-opted by the debugger
* - registers are referred to by the __frame variable (GR28)
*/
asmlinkage void do_NMI(void)
{
-} /* end do_NMI() */
-
-/*****************************************************************************/
-/**
- * request_irq - allocate an interrupt line
- * @irq: Interrupt line to allocate
- * @handler: Function to be called when the IRQ occurs
- * @irqflags: Interrupt type flags
- * @devname: An ascii name for the claiming device
- * @dev_id: A cookie passed back to the handler function
- *
- * This call allocates interrupt resources and enables the
- * interrupt line and IRQ handling. From the point this
- * call is made your handler function may be invoked. Since
- * your handler function must clear any interrupt the board
- * raises, you must take care both to initialise your hardware
- * and to set up the interrupt handler in the right order.
- *
- * Dev_id must be globally unique. Normally the address of the
- * device data structure is used as the cookie. Since the handler
- * receives this value it makes sense to use it.
- *
- * If your interrupt is shared you must pass a non NULL dev_id
- * as this is required when freeing the interrupt.
- *
- * Flags:
- *
- * IRQF_SHARED Interrupt is shared
- *
- * IRQF_DISABLED Disable local interrupts while processing
- *
- * IRQF_SAMPLE_RANDOM The interrupt can be used for entropy
- *
- */
-
-int request_irq(unsigned int irq,
- irqreturn_t (*handler)(int, void *, struct pt_regs *),
- unsigned long irqflags,
- const char * devname,
- void *dev_id)
-{
- int retval;
- struct irqaction *action;
-
-#if 1
- /*
- * Sanity-check: shared interrupts should REALLY pass in
- * a real dev-ID, otherwise we'll have trouble later trying
- * to figure out which interrupt is which (messes up the
- * interrupt freeing logic etc).
- */
- if (irqflags & IRQF_SHARED) {
- if (!dev_id)
- printk("Bad boy: %s (at 0x%x) called us without a dev_id!\n",
- devname, (&irq)[-1]);
- }
-#endif
-
- if ((irq >> NR_IRQ_LOG2_ACTIONS_PER_GROUP) >= NR_IRQ_GROUPS)
- return -EINVAL;
- if (!handler)
- return -EINVAL;
-
- action = (struct irqaction *) kmalloc(sizeof(struct irqaction), GFP_KERNEL);
- if (!action)
- return -ENOMEM;
-
- action->handler = handler;
- action->flags = irqflags;
- action->mask = CPU_MASK_NONE;
- action->name = devname;
- action->next = NULL;
- action->dev_id = dev_id;
-
- retval = setup_irq(irq, action);
- if (retval)
- kfree(action);
- return retval;
-}
-
-EXPORT_SYMBOL(request_irq);
-
-/**
- * free_irq - free an interrupt
- * @irq: Interrupt line to free
- * @dev_id: Device identity to free
- *
- * Remove an interrupt handler. The handler is removed and if the
- * interrupt line is no longer in use by any driver it is disabled.
- * On a shared IRQ the caller must ensure the interrupt is disabled
- * on the card it drives before calling this function. The function
- * does not return until any executing interrupts for this IRQ
- * have completed.
- *
- * This function may be called from interrupt context.
- *
- * Bugs: Attempting to free an irq in a handler for the same irq hangs
- * the machine.
- */
-
-void free_irq(unsigned int irq, void *dev_id)
-{
- struct irq_source *source;
- struct irq_group *group;
- struct irq_level *level;
- struct irqaction **p, **pp;
- unsigned long flags;
-
- if ((irq >> NR_IRQ_LOG2_ACTIONS_PER_GROUP) >= NR_IRQ_GROUPS)
- return;
-
- group = irq_groups[irq >> NR_IRQ_LOG2_ACTIONS_PER_GROUP];
- if (!group)
- BUG();
-
- source = group->sources[irq & (NR_IRQ_ACTIONS_PER_GROUP - 1)];
- if (!source)
- BUG();
-
- level = source->level;
- p = &group->actions[irq & (NR_IRQ_ACTIONS_PER_GROUP - 1)];
-
- spin_lock_irqsave(&level->lock, flags);
-
- for (pp = p; *pp; pp = &(*pp)->next) {
- struct irqaction *action = *pp;
-
- if (action->dev_id != dev_id)
- continue;
-
- /* found it - remove from the list of entries */
- *pp = action->next;
-
- level->usage--;
-
- if (p == pp && group->control)
- group->control(group, irq & (NR_IRQ_ACTIONS_PER_GROUP - 1), 0);
-
- if (level->usage == 0)
- __set_MASK(level - frv_irq_levels);
-
- spin_unlock_irqrestore(&level->lock,flags);
-
-#ifdef CONFIG_SMP
- /* Wait to make sure it's not being used on another CPU */
- while (desc->status & IRQ_INPROGRESS)
- barrier();
-#endif
- kfree(action);
- return;
- }
-}
-
-EXPORT_SYMBOL(free_irq);
-
-/*
- * IRQ autodetection code..
- *
- * This depends on the fact that any interrupt that comes in on to an
- * unassigned IRQ will cause GxICR_DETECT to be set
- */
-
-static DECLARE_MUTEX(probe_sem);
-
-/**
- * probe_irq_on - begin an interrupt autodetect
- *
- * Commence probing for an interrupt. The interrupts are scanned
- * and a mask of potential interrupt lines is returned.
- *
- */
-
-unsigned long probe_irq_on(void)
-{
- down(&probe_sem);
- return 0;
}
-EXPORT_SYMBOL(probe_irq_on);
-
-/*
- * Return a mask of triggered interrupts (this
- * can handle only legacy ISA interrupts).
- */
-
-/**
- * probe_irq_mask - scan a bitmap of interrupt lines
- * @val: mask of interrupts to consider
- *
- * Scan the ISA bus interrupt lines and return a bitmap of
- * active interrupts. The interrupt probe logic state is then
- * returned to its previous value.
- *
- * Note: we need to scan all the irq's even though we will
- * only return ISA irq numbers - just so that we reset them
- * all to a known state.
- */
-unsigned int probe_irq_mask(unsigned long xmask)
-{
- up(&probe_sem);
- return 0;
-}
-
-EXPORT_SYMBOL(probe_irq_mask);
-
/*
- * Return the one interrupt that triggered (this can
- * handle any interrupt source).
- */
-
-/**
- * probe_irq_off - end an interrupt autodetect
- * @xmask: mask of potential interrupts (unused)
- *
- * Scans the unused interrupt lines and returns the line which
- * appears to have triggered the interrupt. If no interrupt was
- * found then zero is returned. If more than one interrupt is
- * found then minus the first candidate is returned to indicate
- * their is doubt.
- *
- * The interrupt probe logic state is returned to its previous
- * value.
- *
- * BUGS: When used in a module (which arguably shouldnt happen)
- * nothing prevents two IRQ probe callers from overlapping. The
- * results of this are non-optimal.
+ * initialise the interrupt system
*/
-
-int probe_irq_off(unsigned long xmask)
-{
- up(&probe_sem);
- return -1;
-}
-
-EXPORT_SYMBOL(probe_irq_off);
-
-/* this was setup_x86_irq but it seems pretty generic */
-int setup_irq(unsigned int irq, struct irqaction *new)
-{
- struct irq_source *source;
- struct irq_group *group;
- struct irq_level *level;
- struct irqaction **p, **pp;
- unsigned long flags;
-
- group = irq_groups[irq >> NR_IRQ_LOG2_ACTIONS_PER_GROUP];
- if (!group)
- BUG();
-
- source = group->sources[irq & (NR_IRQ_ACTIONS_PER_GROUP - 1)];
- if (!source)
- BUG();
-
- level = source->level;
-
- p = &group->actions[irq & (NR_IRQ_ACTIONS_PER_GROUP - 1)];
-
- /*
- * Some drivers like serial.c use request_irq() heavily,
- * so we have to be careful not to interfere with a
- * running system.
- */
- if (new->flags & IRQF_SAMPLE_RANDOM) {
- /*
- * This function might sleep, we want to call it first,
- * outside of the atomic block.
- * Yes, this might clear the entropy pool if the wrong
- * driver is attempted to be loaded, without actually
- * installing a new handler, but is this really a problem,
- * only the sysadmin is able to do this.
- */
- rand_initialize_irq(irq);
- }
-
- /* must juggle the interrupt processing stuff with interrupts disabled */
- spin_lock_irqsave(&level->lock, flags);
-
- /* can't share interrupts unless all parties agree to */
- if (level->usage != 0 && !(level->flags & new->flags & IRQF_SHARED)) {
- spin_unlock_irqrestore(&level->lock,flags);
- return -EBUSY;
- }
-
- /* add new interrupt at end of irq queue */
- pp = p;
- while (*pp)
- pp = &(*pp)->next;
-
- *pp = new;
-
- level->usage++;
- level->flags = new->flags;
-
- /* turn the interrupts on */
- if (level->usage == 1)
- __clr_MASK(level - frv_irq_levels);
-
- if (p == pp && group->control)
- group->control(group, irq & (NR_IRQ_ACTIONS_PER_GROUP - 1), 1);
-
- spin_unlock_irqrestore(&level->lock, flags);
- register_irq_proc(irq);
- return 0;
-}
-
-static struct proc_dir_entry * root_irq_dir;
-static struct proc_dir_entry * irq_dir [NR_IRQS];
-
-#define HEX_DIGITS 8
-
-static unsigned int parse_hex_value (const char __user *buffer,
- unsigned long count, unsigned long *ret)
-{
- unsigned char hexnum [HEX_DIGITS];
- unsigned long value;
- int i;
-
- if (!count)
- return -EINVAL;
- if (count > HEX_DIGITS)
- count = HEX_DIGITS;
- if (copy_from_user(hexnum, buffer, count))
- return -EFAULT;
-
- /*
- * Parse the first 8 characters as a hex string, any non-hex char
- * is end-of-string. '00e1', 'e1', '00E1', 'E1' are all the same.
- */
- value = 0;
-
- for (i = 0; i < count; i++) {
- unsigned int c = hexnum[i];
-
- switch (c) {
- case '0' ... '9': c -= '0'; break;
- case 'a' ... 'f': c -= 'a'-10; break;
- case 'A' ... 'F': c -= 'A'-10; break;
- default:
- goto out;
- }
- value = (value << 4) | c;
- }
-out:
- *ret = value;
- return 0;
-}
-
-
-static int prof_cpu_mask_read_proc (char *page, char **start, off_t off,
- int count, int *eof, void *data)
-{
- unsigned long *mask = (unsigned long *) data;
- if (count < HEX_DIGITS+1)
- return -EINVAL;
- return sprintf (page, "%08lx\n", *mask);
-}
-
-static int prof_cpu_mask_write_proc (struct file *file, const char __user *buffer,
- unsigned long count, void *data)
-{
- unsigned long *mask = (unsigned long *) data, full_count = count, err;
- unsigned long new_value;
-
- show_state();
- err = parse_hex_value(buffer, count, &new_value);
- if (err)
- return err;
-
- *mask = new_value;
- return full_count;
-}
-
-#define MAX_NAMELEN 10
-
-static void register_irq_proc (unsigned int irq)
-{
- char name [MAX_NAMELEN];
-
- if (!root_irq_dir || irq_dir[irq])
- return;
-
- memset(name, 0, MAX_NAMELEN);
- sprintf(name, "%d", irq);
-
- /* create /proc/irq/1234 */
- irq_dir[irq] = proc_mkdir(name, root_irq_dir);
-}
-
-unsigned long prof_cpu_mask = -1;
-
-void init_irq_proc (void)
+void __init init_IRQ(void)
{
- struct proc_dir_entry *entry;
- int i;
+ int level;
- /* create /proc/irq */
- root_irq_dir = proc_mkdir("irq", NULL);
+ for (level = 1; level <= 14; level++)
+ set_irq_chip_and_handler(level, &frv_cpu_pic,
+ handle_level_irq);
- /* create /proc/irq/prof_cpu_mask */
- entry = create_proc_entry("prof_cpu_mask", 0600, root_irq_dir);
- if (!entry)
- return;
+ set_irq_handler(IRQ_CPU_TIMER0, handle_edge_irq);
- entry->nlink = 1;
- entry->data = (void *)&prof_cpu_mask;
- entry->read_proc = prof_cpu_mask_read_proc;
- entry->write_proc = prof_cpu_mask_write_proc;
-
- /*
- * Create entries for all existing IRQs.
+ /* set the trigger levels for internal interrupt sources
+ * - timers all falling-edge
+ * - ERR0 is rising-edge
+ * - all others are high-level
*/
- for (i = 0; i < NR_IRQS; i++)
- register_irq_proc(i);
-}
+ __set_IITMR(0, 0x003f0000); /* DMA0-3, TIMER0-2 */
+ __set_IITMR(1, 0x20000000); /* ERR0-1, UART0-1, DMA4-7 */
+
+ /* route internal interrupts */
+ set_IRR(4, IRQ_DMA3_LEVEL, IRQ_DMA2_LEVEL, IRQ_DMA1_LEVEL,
+ IRQ_DMA0_LEVEL);
+ set_IRR(5, 0, IRQ_TIMER2_LEVEL, IRQ_TIMER1_LEVEL, IRQ_TIMER0_LEVEL);
+ set_IRR(6, IRQ_GDBSTUB_LEVEL, IRQ_GDBSTUB_LEVEL,
+ IRQ_UART1_LEVEL, IRQ_UART0_LEVEL);
+ set_IRR(7, IRQ_DMA7_LEVEL, IRQ_DMA6_LEVEL, IRQ_DMA5_LEVEL,
+ IRQ_DMA4_LEVEL);
+
+ /* route external interrupts */
+ set_IRR(2, IRQ_XIRQ7_LEVEL, IRQ_XIRQ6_LEVEL, IRQ_XIRQ5_LEVEL,
+ IRQ_XIRQ4_LEVEL);
+ set_IRR(3, IRQ_XIRQ3_LEVEL, IRQ_XIRQ2_LEVEL, IRQ_XIRQ1_LEVEL,
+ IRQ_XIRQ0_LEVEL);
+
+#if defined(CONFIG_MB93091_VDK)
+ __set_TM1(0x55550000); /* XIRQ7-0 all active low */
+#elif defined(CONFIG_MB93093_PDK)
+ __set_TM1(0x15550000); /* XIRQ7 active high, 6-0 all active low */
+#else
+#error dont know external IRQ trigger levels for this setup
+#endif
-/*****************************************************************************/
-/*
- * initialise the interrupt system
- */
-void __init init_IRQ(void)
-{
- route_cpu_irqs();
fpga_init();
#ifdef CONFIG_FUJITSU_MB93493
- route_mb93493_irqs();
+ mb93493_init();
#endif
-} /* end init_IRQ() */
+}
diff --git a/arch/frv/kernel/setup.c b/arch/frv/kernel/setup.c
index af08ccd..d96a57e 100644
--- a/arch/frv/kernel/setup.c
+++ b/arch/frv/kernel/setup.c
@@ -43,7 +43,6 @@ #include <asm/spr-regs.h>
#include <asm/mb-regs.h>
#include <asm/mb93493-regs.h>
#include <asm/gdb-stub.h>
-#include <asm/irq-routing.h>
#include <asm/io.h>
#ifdef CONFIG_BLK_DEV_INITRD
diff --git a/arch/frv/kernel/time.c b/arch/frv/kernel/time.c
index 68a77fe..3d0284b 100644
--- a/arch/frv/kernel/time.c
+++ b/arch/frv/kernel/time.c
@@ -26,7 +26,6 @@ #include <asm/io.h>
#include <asm/timer-regs.h>
#include <asm/mb-regs.h>
#include <asm/mb86943a.h>
-#include <asm/irq-routing.h>
#include <linux/timex.h>
diff --git a/arch/frv/mb93090-mb00/pci-irq.c b/arch/frv/mb93090-mb00/pci-irq.c
index 2278c80..ba58752 100644
--- a/arch/frv/mb93090-mb00/pci-irq.c
+++ b/arch/frv/mb93090-mb00/pci-irq.c
@@ -15,7 +15,6 @@ #include <linux/irq.h>
#include <asm/io.h>
#include <asm/smp.h>
-#include <asm/irq-routing.h>
#include "pci-frv.h"
diff --git a/include/asm-frv/cpu-irqs.h b/include/asm-frv/cpu-irqs.h
index 5cd691e..478f349 100644
--- a/include/asm-frv/cpu-irqs.h
+++ b/include/asm-frv/cpu-irqs.h
@@ -14,36 +14,6 @@ #define _ASM_CPU_IRQS_H
#ifndef __ASSEMBLY__
-#include <asm/irq-routing.h>
-
-#define IRQ_BASE_CPU (NR_IRQ_ACTIONS_PER_GROUP * 0)
-
-/* IRQ IDs presented to drivers */
-enum {
- IRQ_CPU__UNUSED = IRQ_BASE_CPU,
- IRQ_CPU_UART0,
- IRQ_CPU_UART1,
- IRQ_CPU_TIMER0,
- IRQ_CPU_TIMER1,
- IRQ_CPU_TIMER2,
- IRQ_CPU_DMA0,
- IRQ_CPU_DMA1,
- IRQ_CPU_DMA2,
- IRQ_CPU_DMA3,
- IRQ_CPU_DMA4,
- IRQ_CPU_DMA5,
- IRQ_CPU_DMA6,
- IRQ_CPU_DMA7,
- IRQ_CPU_EXTERNAL0,
- IRQ_CPU_EXTERNAL1,
- IRQ_CPU_EXTERNAL2,
- IRQ_CPU_EXTERNAL3,
- IRQ_CPU_EXTERNAL4,
- IRQ_CPU_EXTERNAL5,
- IRQ_CPU_EXTERNAL6,
- IRQ_CPU_EXTERNAL7,
-};
-
/* IRQ to level mappings */
#define IRQ_GDBSTUB_LEVEL 15
#define IRQ_UART_LEVEL 13
@@ -82,6 +52,30 @@ #define IRQ_XIRQ5_LEVEL 6
#define IRQ_XIRQ6_LEVEL 7
#define IRQ_XIRQ7_LEVEL 8
+/* IRQ IDs presented to drivers */
+#define IRQ_CPU__UNUSED IRQ_BASE_CPU
+#define IRQ_CPU_UART0 (IRQ_BASE_CPU + IRQ_UART0_LEVEL)
+#define IRQ_CPU_UART1 (IRQ_BASE_CPU + IRQ_UART1_LEVEL)
+#define IRQ_CPU_TIMER0 (IRQ_BASE_CPU + IRQ_TIMER0_LEVEL)
+#define IRQ_CPU_TIMER1 (IRQ_BASE_CPU + IRQ_TIMER1_LEVEL)
+#define IRQ_CPU_TIMER2 (IRQ_BASE_CPU + IRQ_TIMER2_LEVEL)
+#define IRQ_CPU_DMA0 (IRQ_BASE_CPU + IRQ_DMA0_LEVEL)
+#define IRQ_CPU_DMA1 (IRQ_BASE_CPU + IRQ_DMA1_LEVEL)
+#define IRQ_CPU_DMA2 (IRQ_BASE_CPU + IRQ_DMA2_LEVEL)
+#define IRQ_CPU_DMA3 (IRQ_BASE_CPU + IRQ_DMA3_LEVEL)
+#define IRQ_CPU_DMA4 (IRQ_BASE_CPU + IRQ_DMA4_LEVEL)
+#define IRQ_CPU_DMA5 (IRQ_BASE_CPU + IRQ_DMA5_LEVEL)
+#define IRQ_CPU_DMA6 (IRQ_BASE_CPU + IRQ_DMA6_LEVEL)
+#define IRQ_CPU_DMA7 (IRQ_BASE_CPU + IRQ_DMA7_LEVEL)
+#define IRQ_CPU_EXTERNAL0 (IRQ_BASE_CPU + IRQ_XIRQ0_LEVEL)
+#define IRQ_CPU_EXTERNAL1 (IRQ_BASE_CPU + IRQ_XIRQ1_LEVEL)
+#define IRQ_CPU_EXTERNAL2 (IRQ_BASE_CPU + IRQ_XIRQ2_LEVEL)
+#define IRQ_CPU_EXTERNAL3 (IRQ_BASE_CPU + IRQ_XIRQ3_LEVEL)
+#define IRQ_CPU_EXTERNAL4 (IRQ_BASE_CPU + IRQ_XIRQ4_LEVEL)
+#define IRQ_CPU_EXTERNAL5 (IRQ_BASE_CPU + IRQ_XIRQ5_LEVEL)
+#define IRQ_CPU_EXTERNAL6 (IRQ_BASE_CPU + IRQ_XIRQ6_LEVEL)
+#define IRQ_CPU_EXTERNAL7 (IRQ_BASE_CPU + IRQ_XIRQ7_LEVEL)
+
#endif /* !__ASSEMBLY__ */
#endif /* _ASM_CPU_IRQS_H */
diff --git a/include/asm-frv/hardirq.h b/include/asm-frv/hardirq.h
index 7581b5a..fc47515 100644
--- a/include/asm-frv/hardirq.h
+++ b/include/asm-frv/hardirq.h
@@ -26,5 +26,10 @@ #ifdef CONFIG_SMP
#error SMP not available on FR-V
#endif /* CONFIG_SMP */
+extern atomic_t irq_err_count;
+static inline void ack_bad_irq(int irq)
+{
+ atomic_inc(&irq_err_count);
+}
#endif
diff --git a/include/asm-frv/irq-routing.h b/include/asm-frv/irq-routing.h
deleted file mode 100644
index ac3ab90..0000000
--- a/include/asm-frv/irq-routing.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/* irq-routing.h: multiplexed IRQ routing
- *
- * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells ([email protected])
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef _ASM_IRQ_ROUTING_H
-#define _ASM_IRQ_ROUTING_H
-
-#ifndef __ASSEMBLY__
-
-#include <linux/spinlock.h>
-#include <asm/irq.h>
-
-struct irq_source;
-struct irq_level;
-
-/*
- * IRQ action distribution sets
- */
-struct irq_group {
- int first_irq; /* first IRQ distributed here */
- void (*control)(struct irq_group *group, int index, int on);
-
- struct irqaction *actions[NR_IRQ_ACTIONS_PER_GROUP]; /* IRQ action chains */
- struct irq_source *sources[NR_IRQ_ACTIONS_PER_GROUP]; /* IRQ sources */
- int disable_cnt[NR_IRQ_ACTIONS_PER_GROUP]; /* disable counts */
-};
-
-/*
- * IRQ source manager
- */
-struct irq_source {
- struct irq_source *next;
- struct irq_level *level;
- const char *muxname;
- volatile void __iomem *muxdata;
- unsigned long irqmask;
-
- void (*doirq)(struct irq_source *source);
-};
-
-/*
- * IRQ level management (per CPU IRQ priority / entry vector)
- */
-struct irq_level {
- int usage;
- int disable_count;
- unsigned long flags; /* current IRQF_DISABLED and IRQF_SHARED settings */
- spinlock_t lock;
- struct irq_source *sources;
-};
-
-extern struct irq_level frv_irq_levels[16];
-extern struct irq_group *irq_groups[NR_IRQ_GROUPS];
-
-extern void frv_irq_route(struct irq_source *source, int irqlevel);
-extern void frv_irq_route_external(struct irq_source *source, int irq);
-extern void frv_irq_set_group(struct irq_group *group);
-extern void distribute_irqs(struct irq_group *group, unsigned long irqmask);
-extern void route_cpu_irqs(void);
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* _ASM_IRQ_ROUTING_H */
diff --git a/include/asm-frv/irq.h b/include/asm-frv/irq.h
index 58b6192..8fefd6b 100644
--- a/include/asm-frv/irq.h
+++ b/include/asm-frv/irq.h
@@ -1,6 +1,6 @@
/* irq.h: FRV IRQ definitions
*
- * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Copyright (C) 2006 Red Hat, Inc. All Rights Reserved.
* Written by David Howells ([email protected])
*
* This program is free software; you can redistribute it and/or
@@ -12,32 +12,22 @@
#ifndef _ASM_IRQ_H_
#define _ASM_IRQ_H_
-
-/*
- * the system has an on-CPU PIC and another PIC on the FPGA and other PICs on other peripherals,
- * so we do some routing in irq-routing.[ch] to reduce the number of false-positives seen by
- * drivers
- */
-
/* this number is used when no interrupt has been assigned */
#define NO_IRQ (-1)
-#define NR_IRQ_LOG2_ACTIONS_PER_GROUP 5
-#define NR_IRQ_ACTIONS_PER_GROUP (1 << NR_IRQ_LOG2_ACTIONS_PER_GROUP)
-#define NR_IRQ_GROUPS 4
-#define NR_IRQS (NR_IRQ_ACTIONS_PER_GROUP * NR_IRQ_GROUPS)
+#define NR_IRQS 48
+#define IRQ_BASE_CPU (0 * 16)
+#define IRQ_BASE_FPGA (1 * 16)
+#define IRQ_BASE_MB93493 (2 * 16)
/* probe returns a 32-bit IRQ mask:-/ */
-#define MIN_PROBE_IRQ (NR_IRQS - 32)
+#define MIN_PROBE_IRQ (NR_IRQS - 32)
+#ifndef __ASSEMBLY__
static inline int irq_canonicalize(int irq)
{
return irq;
}
-
-extern void disable_irq_nosync(unsigned int irq);
-extern void disable_irq(unsigned int irq);
-extern void enable_irq(unsigned int irq);
-
+#endif
#endif /* _ASM_IRQ_H_ */
diff --git a/include/asm-frv/mb93091-fpga-irqs.h b/include/asm-frv/mb93091-fpga-irqs.h
index 341bfc5..19778c5 100644
--- a/include/asm-frv/mb93091-fpga-irqs.h
+++ b/include/asm-frv/mb93091-fpga-irqs.h
@@ -12,11 +12,9 @@
#ifndef _ASM_MB93091_FPGA_IRQS_H
#define _ASM_MB93091_FPGA_IRQS_H
-#ifndef __ASSEMBLY__
-
-#include <asm/irq-routing.h>
+#include <asm/irq.h>
-#define IRQ_BASE_FPGA (NR_IRQ_ACTIONS_PER_GROUP * 1)
+#ifndef __ASSEMBLY__
/* IRQ IDs presented to drivers */
enum {
diff --git a/include/asm-frv/mb93093-fpga-irqs.h b/include/asm-frv/mb93093-fpga-irqs.h
index 1e0f11c..590266b 100644
--- a/include/asm-frv/mb93093-fpga-irqs.h
+++ b/include/asm-frv/mb93093-fpga-irqs.h
@@ -12,11 +12,9 @@
#ifndef _ASM_MB93093_FPGA_IRQS_H
#define _ASM_MB93093_FPGA_IRQS_H
-#ifndef __ASSEMBLY__
-
-#include <asm/irq-routing.h>
+#include <asm/irq.h>
-#define IRQ_BASE_FPGA (NR_IRQ_ACTIONS_PER_GROUP * 1)
+#ifndef __ASSEMBLY__
/* IRQ IDs presented to drivers */
enum {
diff --git a/include/asm-frv/mb93493-irqs.h b/include/asm-frv/mb93493-irqs.h
index 15096e7..82c7aed 100644
--- a/include/asm-frv/mb93493-irqs.h
+++ b/include/asm-frv/mb93493-irqs.h
@@ -12,11 +12,9 @@
#ifndef _ASM_MB93493_IRQS_H
#define _ASM_MB93493_IRQS_H
-#ifndef __ASSEMBLY__
-
-#include <asm/irq-routing.h>
+#include <asm/irq.h>
-#define IRQ_BASE_MB93493 (NR_IRQ_ACTIONS_PER_GROUP * 2)
+#ifndef __ASSEMBLY__
/* IRQ IDs presented to drivers */
enum {
diff --git a/include/asm-frv/mb93493-regs.h b/include/asm-frv/mb93493-regs.h
index c54aa9d..8a1f6aa 100644
--- a/include/asm-frv/mb93493-regs.h
+++ b/include/asm-frv/mb93493-regs.h
@@ -15,6 +15,7 @@ #define _ASM_MB93493_REGS_H
#include <asm/mb-regs.h>
#include <asm/mb93493-irqs.h>
+#define __addr_MB93493(X) ((volatile unsigned long *)(__region_CS3 + (X)))
#define __get_MB93493(X) ({ *(volatile unsigned long *)(__region_CS3 + (X)); })
#define __set_MB93493(X,V) \
@@ -26,6 +27,7 @@ #define __get_MB93493_STSR(X) __get_MB93
#define __set_MB93493_STSR(X,V) __set_MB93493(0x3c0 + (X) * 4, (V))
#define MB93493_STSR_EN
+#define __addr_MB93493_IQSR(X) __addr_MB93493(0x3d0 + (X) * 4)
#define __get_MB93493_IQSR(X) __get_MB93493(0x3d0 + (X) * 4)
#define __set_MB93493_IQSR(X,V) __set_MB93493(0x3d0 + (X) * 4, (V))
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
