On Monday 04 September 2006 18:31, Steffen Klassert wrote:
>On Mon, Sep 04, 2006 at 07:05:53AM -0400, Gene Heskett wrote:
>> On Sunday 03 September 2006 22:42, Linus Torvalds wrote:
>> >Things are definitely calming down, and while I'm not ready to call it
>> > a final 2.6.18 yet, this migt be the last -rc.
>>
>> It has one new build warning, no idea if show stopper or not:
>> ----------
>> drivers/usb/input/hid-core.c:1447:1: warning: "USB_DEVICE_ID_GTCO_404"
>> redefined
>> drivers/usb/input/hid-core.c:1446:1: warning: this is the location of
>> the previous definition
>> ----------
>> until after I boot to it...
>>
>> And that didn't seem to effect the mouse. Other usb stuff has not been
>> exersized yet.
>
>The offending patch is
>hid-core.c: Adds all GTCO CalComp Digitizers and InterWrite School
> Products to blacklist
>
>If one looks at this patch it seems to be just a typo.
>The patch below fixes at least the warning.
>
>--- vanilla-2.6.18-rc6/drivers/usb/input/hid-core.c 2006-09-04
> 04:19:48.000000000 +0200 +++
> linux-2.6.18-rc6/drivers/usb/input/hid-core.c 2006-09-04
> 23:53:10.000000000 +0200 @@ -1444,7 +1444,7 @@
> #define USB_DEVICE_ID_GTCO_402 0x0402
> #define USB_DEVICE_ID_GTCO_403 0x0403
> #define USB_DEVICE_ID_GTCO_404 0x0404
>-#define USB_DEVICE_ID_GTCO_404 0x0405
>+#define USB_DEVICE_ID_GTCO_405 0x0405
> #define USB_DEVICE_ID_GTCO_500 0x0500
> #define USB_DEVICE_ID_GTCO_501 0x0501
> #define USB_DEVICE_ID_GTCO_502 0x0502
>@@ -1657,7 +1657,7 @@
> { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_402, HID_QUIRK_IGNORE },
> { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_403, HID_QUIRK_IGNORE },
> { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_404, HID_QUIRK_IGNORE },
>- { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_404, HID_QUIRK_IGNORE },
>+ { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_405, HID_QUIRK_IGNORE },
> { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_500, HID_QUIRK_IGNORE },
> { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_501, HID_QUIRK_IGNORE },
> { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_502, HID_QUIRK_IGNORE },
>-
I did apply this patch, with vim as its only 2 characters that are actually
changed. But now I'm going to go back and look at the log from before I
rebooted to this patch. Yes, since 2.6.18-rc6, I'm getting these in the
log, and this patch obviously has no effect on the below log entries.
--------------
Sep 3 15:20:10 coyote kernel: usb 3-2.1: reset low speed USB device using
ohci_hcd and address 3
Sep 3 15:33:14 coyote kernel: usb 3-2.1: reset low speed USB device using
ohci_hcd and address 3
Sep 3 15:47:25 coyote kernel: usb 3-2.1: reset low speed USB device using
ohci_hcd and address 3
Sep 3 15:56:45 coyote kernel: usb 3-2.1: reset low speed USB device using
ohci_hcd and address 3
Sep 3 16:08:05 coyote kernel: usb 3-2.1: reset low speed USB device using
ohci_hcd and address 3
Sep 3 16:17:24 coyote kernel: usb 3-2.1: reset low speed USB device using
ohci_hcd and address 3
Sep 3 16:37:13 coyote kernel: usb 3-2.1: reset low speed USB device using
ohci_hcd and address 3
Sep 3 16:48:12 coyote kernel: usb 3-2.1: reset low speed USB device using
ohci_hcd and address 3
Sep 3 17:19:10 coyote kernel: usb 3-2.1: reset low speed USB device using
ohci_hcd and address 3
Sep 3 17:26:16 coyote kernel: usb 3-2.1: reset low speed USB device using
ohci_hcd and address 3
Sep 3 17:36:22 coyote kernel: usb 3-2.1: reset low speed USB device using
ohci_hcd and address 3
Sep 3 17:42:18 coyote kernel: usb 3-2.1: reset low speed USB device using
ohci_hcd and address 3
Sep 3 17:51:46 coyote kernel: usb 3-2.1: reset low speed USB device using
ohci_hcd and address 3
Sep 3 18:03:08 coyote kernel: usb 3-2.1: reset low speed USB device using
ohci_hcd and address 3
Sep 3 18:16:52 coyote kernel: usb 3-2.1: reset low speed USB device using
ohci_hcd and address 3
Sep 3 18:35:08 coyote kernel: usb 3-2.1: reset low speed USB device using
ohci_hcd and address 3
Sep 3 18:43:34 coyote kernel: usb 3-2.1: reset low speed USB device using
ohci_hcd and address 3
Sep 3 18:52:31 coyote kernel: usb 3-2.1: reset low speed USB device using
ohci_hcd and address 3
Sep 3 19:10:15 coyote kernel: usb 3-2.1: reset low speed USB device using
ohci_hcd and address 3
Sep 3 19:27:17 coyote kernel: usb 3-2.1: reset low speed USB device using
ohci_hcd and address 3
Sep 3 19:35:45 coyote kernel: usb 3-2.1: reset low speed USB device using
ohci_hcd and address 3
-----------
And they are being logged at times when I am nowhere near the mouse to move
it, at varying intervals of 2-3 a minute as you can see above.
Is there a way to shut this up? The mouse is working great, although its
possible the battery is getting weak.
--
Cheers, Gene
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
Yahoo.com and AOL/TW attorneys please note, additions to the above
message by Gene Heskett are:
Copyright 2006 by Maurice Eugene Heskett, all rights reserved.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
