Re: File corruption with 2940U2 SCSI card and aic7xxx driver.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Does this still occur with a more recent upstream kernel ?

I've tried kernel version 2.6.16 (with version 7 of the aic7xxx
driver).  Same problem.



There are also known AHA2940 incompatibilities with a few boards. People
always had problems with CUV4X* boards for one. Bit early to assume its
the board however it might be worth making sure the card is well seated
and the cabling looks good. That said I'd expect parity errors..


I've tried two different PCI slots and two different SCSI cables.
Same problem.  I've enabled PCI parity checking via the pci_parity
option to the aic7xxx driver, but I don't see any parity errors in the
kernel messages.

I'm having trouble believing that this could be a hardware problem
because I can consistently read data from the SCSI disks, the
corruption only seems to happen during writes.

Thanks for your suggestions.

--
VGER BF report: H 1.90148e-11
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux