Re: [PATCH] kthread: saa7134-tvaudio.c

[Andrew Morton <akpm@osdl.org>]

On Tue, 29 Aug 2006 14:15:55 -0700
Sukadev Bhattiprolu <sukadev@us.ibm.com> wrote:

> 
> Replace kernel_thread() with kthread_run() since kernel_thread()
> is deprecated in drivers/modules. 
> 
> Note that this driver, like a few others, allows SIGTERM. Not
> sure if that is affected by conversion to kthread. Appreciate
> any comments on that.
> 

hm, I think this driver needs more help.

- It shouldn't be using signals at all, really.  Signals are for
  userspace IPC.  The kernel internally has better/richer/faster/tighter
  ways of inter-thread communication.

- saa7134_tvaudio_fini()-versus-tvaudio_sleep() looks racy:

	if (dev->thread.scan1 == dev->thread.scan2 && !dev->thread.shutdown) {
		if (timeout < 0) {
			set_current_state(TASK_INTERRUPTIBLE);
			schedule();

  If the wakeup happens after the test of dev->thread.shutdown, that sleep will
  be permanent.


So in general, yes, the driver should be converted to the kthread API -
this is a requirement for virtualisation, but I forget why, and that's the
"standard" way of doing it.

- The signal stuff should go away if at all possible.

- the thread.shutdown field should go away and be replaced by
  kthread_should_stop().

- the tvaudio_sleep() race might need some attention (simply moving the
  set_current_state() to before the add_wait_queue() will suffice).

- the complete_and_exit() stuff might (should) no longer be needed -
  kthread_stop() does that.

Sorry ;)

>  2 files changed, 17 insertions(+), 20 deletions(-)
> 
> Index: lx26-18-rc5/drivers/media/video/saa7134/saa7134.h
> ===================================================================
> --- lx26-18-rc5.orig/drivers/media/video/saa7134/saa7134.h	2006-08-29 14:02:44.000000000 -0700
> +++ lx26-18-rc5/drivers/media/video/saa7134/saa7134.h	2006-08-29 14:04:21.000000000 -0700
> @@ -311,10 +311,8 @@ struct saa7134_pgtable {
>  
>  /* tvaudio thread status */
>  struct saa7134_thread {
> -	pid_t                      pid;
> -	struct completion          exit;
> +	struct task_struct *       task;
>  	wait_queue_head_t          wq;
> -	unsigned int               shutdown;
>  	unsigned int               scan1;
>  	unsigned int               scan2;
>  	unsigned int               mode;
> Index: lx26-18-rc5/drivers/media/video/saa7134/saa7134-tvaudio.c
> ===================================================================
> --- lx26-18-rc5.orig/drivers/media/video/saa7134/saa7134-tvaudio.c	2006-08-29 14:02:44.000000000 -0700
> +++ lx26-18-rc5/drivers/media/video/saa7134/saa7134-tvaudio.c	2006-08-29 14:06:24.000000000 -0700
> @@ -28,6 +28,7 @@
>  #include <linux/slab.h>
>  #include <linux/delay.h>
>  #include <linux/smp_lock.h>
> +#include <linux/kthread.h>
>  #include <asm/div64.h>
>  
>  #include "saa7134-reg.h"
> @@ -357,7 +358,7 @@ static int tvaudio_sleep(struct saa7134_
>  	DECLARE_WAITQUEUE(wait, current);
>  
>  	add_wait_queue(&dev->thread.wq, &wait);
> -	if (dev->thread.scan1 == dev->thread.scan2 && !dev->thread.shutdown) {
> +	if (dev->thread.scan1 == dev->thread.scan2 && !kthread_should_stop()) {
>  		if (timeout < 0) {
>  			set_current_state(TASK_INTERRUPTIBLE);
>  			schedule();
> @@ -525,7 +526,7 @@ static int tvaudio_thread(void *data)
>  	allow_signal(SIGTERM);
>  	for (;;) {
>  		tvaudio_sleep(dev,-1);
> -		if (dev->thread.shutdown || signal_pending(current))
> +		if (kthread_should_stop() || signal_pending(current))
>  			goto done;
>  
>  	restart:
> @@ -633,7 +634,7 @@ static int tvaudio_thread(void *data)
>  		for (;;) {
>  			if (tvaudio_sleep(dev,5000))
>  				goto restart;
> -			if (dev->thread.shutdown || signal_pending(current))
> +			if (kthread_should_stop() || signal_pending(current))
>  				break;
>  			if (UNSET == dev->thread.mode) {
>  				rx = tvaudio_getstereo(dev,&tvaudio[i]);
> @@ -649,7 +650,6 @@ static int tvaudio_thread(void *data)
>  	}
>  
>   done:
> -	complete_and_exit(&dev->thread.exit, 0);
>  	return 0;
>  }
>  
> @@ -798,7 +798,6 @@ static int tvaudio_thread_ddep(void *dat
>  	struct saa7134_dev *dev = data;
>  	u32 value, norms, clock;
>  
> -	daemonize("%s", dev->name);
>  	allow_signal(SIGTERM);
>  
>  	clock = saa7134_boards[dev->board].audio_clock;
> @@ -812,7 +811,7 @@ static int tvaudio_thread_ddep(void *dat
>  
>  	for (;;) {
>  		tvaudio_sleep(dev,-1);
> -		if (dev->thread.shutdown || signal_pending(current))
> +		if (kthread_should_stop() || signal_pending(current))
>  			goto done;
>  
>  	restart:
> @@ -894,7 +893,6 @@ static int tvaudio_thread_ddep(void *dat
>  	}
>  
>   done:
> -	complete_and_exit(&dev->thread.exit, 0);
>  	return 0;
>  }
>  
> @@ -1004,15 +1002,16 @@ int saa7134_tvaudio_init2(struct saa7134
>  		break;
>  	}
>  
> -	dev->thread.pid = -1;
> +	dev->thread.task = NULL;
>  	if (my_thread) {
>  		/* start tvaudio thread */
>  		init_waitqueue_head(&dev->thread.wq);
> -		init_completion(&dev->thread.exit);
> -		dev->thread.pid = kernel_thread(my_thread,dev,0);
> -		if (dev->thread.pid < 0)
> +		dev->thread.task = kthread_run(my_thread,dev,dev->name);
> +		if (IS_ERR(dev->thread.task)) {
>  			printk(KERN_WARNING "%s: kernel_thread() failed\n",
> -			       dev->name);
> +			                              dev->name);
> +			dev->thread.task = NULL;
> +		}
>  		saa7134_tvaudio_do_scan(dev);
>  	}
>  
> @@ -1023,10 +1022,10 @@ int saa7134_tvaudio_init2(struct saa7134
>  int saa7134_tvaudio_fini(struct saa7134_dev *dev)
>  {
>  	/* shutdown tvaudio thread */
> -	if (dev->thread.pid >= 0) {
> -		dev->thread.shutdown = 1;
> -		wake_up_interruptible(&dev->thread.wq);
> -		wait_for_completion(&dev->thread.exit);
> +	if (dev->thread.task) {
> +		/* kthread_stop() wakes up the thread */
> +		kthread_stop(dev->thread.task);
> +		dev->thread.task = NULL;
>  	}
>  	saa_andorb(SAA7134_ANALOG_IO_SELECT, 0x07, 0x00); /* LINE1 */
>  	return 0;
> @@ -1034,7 +1033,7 @@ int saa7134_tvaudio_fini(struct saa7134_
>  
>  int saa7134_tvaudio_do_scan(struct saa7134_dev *dev)
>  {
> -	if (dev->thread.pid >= 0) {
> +	if (dev->thread.task) {
>  		dev->thread.mode = UNSET;
>  		dev->thread.scan2++;
>  		wake_up_interruptible(&dev->thread.wq);
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/