Re: 3ware glitches cause softraid rebuilds

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Jim,

Can you try the attached (and below) patch for 2.6.17.11?

Also, please make sure you are running the latest firmware.

Thanks,

-Adam

diff -Naur linux-2.6.17.11/drivers/scsi/3w-9xxx.c
linux-2.6.17.12/drivers/scsi/3w-9xxx.c
--- linux-2.6.17.11/drivers/scsi/3w-9xxx.c	2006-08-23 14:16:33.000000000 -0700
+++ linux-2.6.17.12/drivers/scsi/3w-9xxx.c	2006-08-28 17:48:29.000000000 -0700
@@ -943,6 +943,7 @@
		before = jiffies;
		while ((response_que_value & TW_9550SX_DRAIN_COMPLETED) !=
TW_9550SX_DRAIN_COMPLETED) {
			response_que_value = readl(TW_RESPONSE_QUEUE_REG_ADDR_LARGE(tw_dev));
+			msleep(1);
			if (time_after(jiffies, before + HZ * 30))
				goto out;
		}
diff -Naur linux-2.6.17.11/drivers/scsi/3w-9xxx.c linux-2.6.17.12/drivers/scsi/3w-9xxx.c
--- linux-2.6.17.11/drivers/scsi/3w-9xxx.c	2006-08-23 14:16:33.000000000 -0700
+++ linux-2.6.17.12/drivers/scsi/3w-9xxx.c	2006-08-28 17:48:29.000000000 -0700
@@ -943,6 +943,7 @@
 		before = jiffies;
 		while ((response_que_value & TW_9550SX_DRAIN_COMPLETED) != TW_9550SX_DRAIN_COMPLETED) {
 			response_que_value = readl(TW_RESPONSE_QUEUE_REG_ADDR_LARGE(tw_dev));
+			msleep(1);
 			if (time_after(jiffies, before + HZ * 30))
 				goto out;
 		}

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux