[PATCH 3/3] kthread: convert the s390 qeth driver to use kthread

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Convert the s390 qeth driver, which can be a module, to use kthread
rather than kernel_thread, whose EXPORT_SYMBOL is deprecated.

Compiles and boots, and dmesg shows it is in use for eth0.

Signed-off-by: Serge E. Hallyn <[email protected]>

---

 drivers/s390/net/qeth_main.c |   10 ++++------
 1 files changed, 4 insertions(+), 6 deletions(-)

315bee45e81ba606c009b59f8ad100bc5818eda3
diff --git a/drivers/s390/net/qeth_main.c b/drivers/s390/net/qeth_main.c
index 5fff1f9..06c1a17 100644
--- a/drivers/s390/net/qeth_main.c
+++ b/drivers/s390/net/qeth_main.c
@@ -50,6 +50,7 @@
 #include <linux/mii.h>
 #include <linux/rcupdate.h>
 #include <linux/ethtool.h>
+#include <linux/kthread.h>
 
 #include <net/arp.h>
 #include <net/ip.h>
@@ -956,7 +957,6 @@ qeth_register_ip_addresses(void *ptr)
 	struct qeth_card *card;
 
 	card = (struct qeth_card *) ptr;
-	daemonize("qeth_reg_ip");
 	QETH_DBF_TEXT(trace,4,"regipth1");
 	if (!qeth_do_run_thread(card, QETH_SET_IP_THREAD))
 		return 0;
@@ -974,7 +974,6 @@ qeth_set_promisc_mode(void *ptr)
 {
 	struct qeth_card *card = (struct qeth_card *) ptr;
 
-	daemonize("qeth_setprm");
 	QETH_DBF_TEXT(trace,4,"setprm1");
 	if (!qeth_do_run_thread(card, QETH_SET_PROMISC_MODE_THREAD))
 		return 0;
@@ -991,7 +990,6 @@ qeth_recover(void *ptr)
 	int rc = 0;
 
 	card = (struct qeth_card *) ptr;
-	daemonize("qeth_recover");
 	QETH_DBF_TEXT(trace,2,"recover1");
 	QETH_DBF_HEX(trace, 2, &card, sizeof(void *));
 	if (!qeth_do_run_thread(card, QETH_RECOVER_THREAD))
@@ -1048,11 +1046,11 @@ qeth_start_kernel_thread(struct qeth_car
 		return;
 
 	if (qeth_do_start_thread(card, QETH_SET_IP_THREAD))
-		kernel_thread(qeth_register_ip_addresses, (void *)card,SIGCHLD);
+		kthread_run(qeth_register_ip_addresses, (void *)card, "qeth_reg_ip");
 	if (qeth_do_start_thread(card, QETH_SET_PROMISC_MODE_THREAD))
-		kernel_thread(qeth_set_promisc_mode, (void *)card, SIGCHLD);
+		kthread_run(qeth_set_promisc_mode, (void *)card, "qeth_setprm");
 	if (qeth_do_start_thread(card, QETH_RECOVER_THREAD))
-		kernel_thread(qeth_recover, (void *) card, SIGCHLD);
+		kthread_run(qeth_recover, (void *) card, "qeth_recover");
 }
 
 
-- 
1.1.6
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux