On Wed, 23 Aug 2006 01:06:03 -0700
Stephane Eranian <[email protected]> wrote:
> This patch the core of perfmon2.
>
> The core consists of:
> - back-end to most system calls
> - notification message queue management
> - sampling buffer allocation
> - support functions for sampling
> - context allocation and destruction
> - user level notification
> - perfmon2 initialization
> - permission checking
>
Remind us again why this doesn't use relay files?
> --- linux-2.6.17.9.base/include/linux/perfmon.h 1969-12-31 16:00:00.000000000 -0800
> +++ linux-2.6.17.9/include/linux/perfmon.h 2006-08-21 03:37:46.000000000 -0700
> @@ -0,0 +1,749 @@
> +/*
> + * Copyright (c) 2001-2006 Hewlett-Packard Development Company, L.P.
> + * Contributed by Stephane Eranian <[email protected]>
> + */
I'm a bit surprised to not see explicit licensing info within the perfmon
files.
> +/*
> + * custom sampling buffer identifier type
> + */
> +typedef __u8 pfm_uuid_t[16];
What does this do, and why is a UUID used?
> +typedef __u32 __bitwise pfm_flags_t;
grumble.
> +/*
> + * Request structure used to define a context
> + */
> +struct pfarg_ctx {
> + pfm_uuid_t ctx_smpl_buf_id; /* which buffer format to use */
> + pfm_flags_t ctx_flags; /* noblock/block/syswide */
> + __s32 ctx_fd; /* ret arg: fd for context */
> + __u64 ctx_smpl_buf_size; /* ret arg: actual buffer size */
> + __u64 ctx_reserved3[12]; /* for future use */
> +};
It helps if the comments explicitly identify those structures which are
shared with userspace.
I suspect this structure _is_ shared with userspace, and I wonder about the
alignment of those u64's. It looks to be OK, as long as pfm_flags_t
remains 32-bit.
Given this, and the fact that the type of pfm_flags_t is cast in stone (if
it is indeed exported to userspace), there really is little point in using
a typedef - we won't be changing it. Sometimes there's a clarity case to
be made for a typedef, but usually not.
> +/*
> + * context flags (ctx_flags)
> + *
> + */
> +#define PFM_FL_NOTIFY_BLOCK 0x01 /* block task on user notifications */
> +#define PFM_FL_SYSTEM_WIDE 0x02 /* create a system wide context */
> +#define PFM_FL_OVFL_NO_MSG 0x80 /* no overflow msgs */
> +#define PFM_FL_MAP_SETS 0x10 /* event sets are remapped */
> +
> +
> +/*
> + * argument structure for pfm_write_pmcs()
> + */
> +struct pfarg_pmc {
> + __u16 reg_num; /* which register */
> + __u16 reg_set; /* event set for this register */
> + pfm_flags_t reg_flags; /* input: flags, return: reg error */
> + __u64 reg_value; /* pmc value */
> + __u64 reg_reserved2[4]; /* for future use */
> +};
>
> +/*
> + * argument structure for pfm_write_pmds() and pfm_read_pmds()
> + */
> +struct pfarg_pmd {
> + __u16 reg_num; /* which register */
> + __u16 reg_set; /* event set for this register */
> + pfm_flags_t reg_flags; /* input: flags, return: reg error */
> + __u64 reg_value; /* initial pmc/pmd value */
> + __u64 reg_long_reset; /* value to reload after notification */
> + __u64 reg_short_reset; /* reset after counter overflow */
> + __u64 reg_last_reset_val; /* return: PMD last reset value */
> + __u64 reg_ovfl_switch_cnt; /* #overflows before switch */
> + __u64 reg_reset_pmds[PFM_PMD_BV]; /* reset on overflow */
> + __u64 reg_smpl_pmds[PFM_PMD_BV]; /* record in sample */
> + __u64 reg_smpl_eventid; /* opaque event identifier */
> + __u64 reg_random_mask; /* bitmask used to limit random value */
> + __u32 reg_random_seed; /* seed for randomization */
> + __u32 reg_reserved2[7]; /* for future use */
> +};
OK, these both seem to be cunningly designed to avoid alignment problems
and compiler changes.
Perhaps declaring all these `packed' might provide additional safety there;
not sure.
The "reserved for future use" field is pretty useless unless there is also
version information somewhere. Is there?
Are the reserved-for-future-use fields guaranteed to be zero when the
kernel priovides them? (They should be).
Does the kernel check that the reserved-for-future-use fields are all-zero
when userspace provides them? (Perhaps it should?)
> +/*
> + * optional argument to pfm_start(), pass NULL if no arg needed
> + */
> +struct pfarg_start {
> + __u16 start_set; /* event set to start with */
> + __u16 start_reserved1; /* for future use */
> + __u32 start_reserved2; /* for future use */
> + __u64 reserved3[3]; /* for future use */
> +};
> +
> +/*
> + * argument to pfm_load_context()
> + */
> +struct pfarg_load {
> + __u32 load_pid; /* thread to attach to */
> + __u16 load_set; /* set to load first */
> + __u16 load_reserved1; /* for future use */
> + __u64 load_reserved2[3]; /* for future use */
> +};
> +
> +/*
> + * argument to pfm_create_evtsets()/pfm_delete_evtsets()
> + *
> + * max timeout: 1h11mn33s (2<<32 usecs)
> + */
> +struct pfarg_setdesc {
> + __u16 set_id; /* which set */
> + __u16 set_id_next; /* next set to go to */
> + pfm_flags_t set_flags; /* input: flags, return: err flag */
> + __u32 set_timeout; /* req/eff switch timeout in usecs */
> + __u32 set_reserved1; /* for future use */
> + __u64 set_mmap_offset; /* ret arg: cookie for mmap offset */
> + __u64 reserved[5]; /* for future use */
> +};
Why microseconds? 64-bit nanoseconds would be more typical, and perhaps
more useful. (Except people have gone and shipped it now, so it gets
messy, yes?)
> +/*
> + * argument to pfm_getinfo_evtsets()
> + */
> +struct pfarg_setinfo {
> + __u16 set_id; /* which set */
> + __u16 set_id_next; /* out: next set to go to */
> + pfm_flags_t set_flags; /* out:flags or error */
> + __u64 set_ovfl_pmds[PFM_PMD_BV]; /* out: last ovfl PMDs */
> + __u64 set_runs; /* out: #times the set was active */
> + __u32 set_timeout; /* out: effective switch timeout in usecs */
> + __u32 set_reserved1; /* for future use */
> + __u64 set_act_duration; /* out: time set active (cycles) */
> + __u64 set_mmap_offset; /* cookie to for mmap offset */
> + __u64 set_avail_pmcs[PFM_PMC_BV];/* unavailable PMCs */
> + __u64 set_avail_pmds[PFM_PMD_BV];/* unavailable PMDs */
> + __u64 reserved[4]; /* for future use */
> +};
> +
> +/*
> + * default value for the user and group security parameters in
> + * /proc/sys/kernel/perfmon/sys_group
> + * /proc/sys/kernel/perfmon/task_group
> + */
> +#define PFM_GROUP_PERM_ANY -1 /* any user/group */
> +
> +/*
> + * remapped set view
> + *
> + * IMPORTANT: cannot be bigger than PAGE_SIZE
> + */
> +struct pfm_set_view {
> + __u32 set_status; /* set status: active/inact */
> + __u32 set_reserved1; /* for future use */
> + __u64 set_runs; /* number of activations */
> + __u64 set_pmds[PFM_MAX_PMDS]; /* 64-bit value of PMDS */
> + volatile unsigned long set_seq; /* sequence number of updates */
> +};
What's that volatile doing in there?
> +/*
> + * pfm_set_view status flags
> + */
> +#define PFM_SETVFL_ACTIVE 0x1 /* set is active */
> +
> +struct pfm_ovfl_msg {
> + __u32 msg_type; /* generic message header */
> + __u32 msg_ovfl_pid; /* process id */
> + __u64 msg_ovfl_pmds[PFM_HW_PMD_BV];/* overflowed PMDs */
> + __u16 msg_active_set; /* active set at overflow */
> + __u16 msg_ovfl_cpu; /* cpu of PMU interrupt */
> + __u32 msg_ovfl_tid; /* kernel thread id */
> + __u64 msg_ovfl_ip; /* IP on PMU intr */
> +};
> +
> +#define PFM_MSG_OVFL 1 /* an overflow happened */
> +#define PFM_MSG_END 2 /* task to which context was attached ended */
> +
> +union pfm_msg {
> + __u32 type;
> + struct pfm_ovfl_msg pfm_ovfl_msg;
> +};
> +
> +/*
> + * perfmon version number
> + */
> +#define PFM_VERSION_MAJ 2U
> +#define PFM_VERSION_MIN 2U
> +#define PFM_VERSION (((PFM_VERSION_MAJ&0xffff)<<16)|\
> + (PFM_VERSION_MIN & 0xffff))
> +#define PFM_VERSION_MAJOR(x) (((x)>>16) & 0xffff)
> +#define PFM_VERSION_MINOR(x) ((x) & 0xffff)
There's a version.
> +#define pfm_ctx_arch(c) ((struct pfm_arch_context *)((c)+1))
ick, so we can do pfm_ctx_arch(42) and there will be no compiler warnings.
Suggest that this be converted to an inline function.
> +
> +static inline void pfm_inc_activation(void)
> +{
> + __get_cpu_var(pmu_activation_number)++;
> +}
> +
> +static inline void pfm_set_activation(struct pfm_context *ctx)
> +{
> + ctx->last_act = __get_cpu_var(pmu_activation_number);
> +}
> +
> +static inline void pfm_set_last_cpu(struct pfm_context *ctx, int cpu)
> +{
> + ctx->last_cpu = cpu;
> +}
> +
> +static inline void pfm_modview_begin(struct pfm_event_set *set)
> +{
> + set->view->set_seq++;
> +}
> +
> +static inline void pfm_modview_end(struct pfm_event_set *set)
> +{
> + set->view->set_seq++;
> +}
> +
> +static inline void pfm_retflag_set(u32 flags, u32 val)
> +{
> + flags &= ~PFM_REG_RETFL_MASK;
> + flags |= (val);
> +}
All the above need caller-provided locking. It would be nice to add a
comment describing what it is.
> +int __pfm_write_pmcs(struct pfm_context *, struct pfarg_pmc *, int);
> +int __pfm_write_pmds(struct pfm_context *, struct pfarg_pmd *, int, int);
> +int __pfm_read_pmds(struct pfm_context *, struct pfarg_pmd *, int);
Prototypes are more useful if the programmer fills in the (well-chosen)
argument identifiers.
> +u64 carta_random32 (u64);
This declaration shouldn't be in this header, should it?
> +static inline void pfm_put_ctx(struct pfm_context *ctx)
> +{
> + fput(ctx->filp);
> +}
This wrapper makes conversion to fput_light() a bit more complex.
> +#define PFM_ONE_64 ((u64)1)
heh, OK, C sucks
> +#define PFM_BPL 64
> +#define PFM_LBPL 6 /* log2(BPL) */
#define PFM_BPL (1 << PFM_LBPL)
> +
> +/*
> + * those operations are not provided by linux/bitmap.h.
Please, add them there then.
> + * We do not need atomicity nor volatile accesses here.
> + * All bitmaps are 64-bit wide.
> + */
> +static inline void pfm_bv_set(u64 *bv, unsigned int rnum)
> +{
> + bv[rnum>>PFM_LBPL] |= PFM_ONE_64 << (rnum&(PFM_BPL-1));
> +}
> +
> +static inline int pfm_bv_isset(u64 *bv, unsigned int rnum)
> +{
> + return bv[rnum>>PFM_LBPL] & (PFM_ONE_64 <<(rnum&(PFM_BPL-1))) ? 1 : 0;
> +}
> +
> +static inline void pfm_bv_clear(u64 *bv, unsigned int rnum)
> +{
> + bv[rnum>>PFM_LBPL] &= ~(PFM_ONE_64 << (rnum&(PFM_BPL-1)));
> +}
> +
> +/*
> + * read a single PMD register. PMD register mapping is provided by PMU
> + * description module. Some PMD registers are require a special read
> + * handler (e.g., virtual PMD mapping to a SW resource).
> + */
> +static inline u64 pfm_read_pmd(struct pfm_context *ctx, unsigned int cnum)
> +{
> + if (unlikely(pfm_pmu_conf->pmd_desc[cnum].type & PFM_REG_V))
> + return pfm_pmu_conf->pmd_sread(ctx, cnum);
> +
> + return pfm_arch_read_pmd(ctx, cnum);
> +}
> +
> +static inline void pfm_write_pmd(struct pfm_context *ctx, unsigned int cnum, u64 value)
> +{
> + /*
> + * PMD writes are ignored for read-only registers
> + */
> + if (pfm_pmu_conf->pmd_desc[cnum].type & PFM_REG_RO)
> + return;
> +
> + if (pfm_pmu_conf->pmd_desc[cnum].type & PFM_REG_V) {
> + pfm_pmu_conf->pmd_swrite(ctx, cnum, value);
> + return;
> + }
> + pfm_arch_write_pmd(ctx, cnum, value);
> +}
> +
> +#define ulp(_x) ((unsigned long *)_x)
OK this is related to bitmap API shortcomings. Let's try to get those
shortcomings fixed and then make all this go away.
> +
> +static union pfm_msg *pfm_get_new_msg(struct pfm_context *ctx)
> +{
> + int idx, next;
> +
> + next = (ctx->msgq_tail+1) % PFM_MAX_MSGS;
> +
> + PFM_DBG("head=%d tail=%d", ctx->msgq_head, ctx->msgq_tail);
> +
> + if (next == ctx->msgq_head)
> + return NULL;
> +
> + idx = ctx->msgq_tail;
> + ctx->msgq_tail = next;
> +
> + PFM_DBG("head=%d tail=%d msg=%d",
> + ctx->msgq_head,
> + ctx->msgq_tail, idx);
> +
> + return ctx->msgq+idx;
> +}
This is the inferior way of doing a ringbuffer.
It's better to let `head' and `tail' wrap all the way through 0xffffffff and
to only mask them off when actually using them as offsets. That way,
(head - tail == 0): empty
(head - tail == PFM_MAX_MSGS): full
(head - tail): number-of-items
which is nicer. It requires that PFM_MAX_MSGS be a power of two, which is
reasonable.
> +
> +/*
> + * only called in for the current task
> + */
> +static int pfm_setup_smpl_fmt(struct pfm_smpl_fmt *fmt, void *fmt_arg,
> + struct pfm_context *ctx, u32 ctx_flags,
> + int mode, struct file *filp)
> +{
> + size_t size = 0;
> + int ret = 0;
> +
> + /*
> + * validate parameters
> + */
> + if (fmt->fmt_validate) {
> + ret = (*fmt->fmt_validate)(ctx_flags, pfm_pmu_conf->num_pmds,
> + fmt_arg);
> + PFM_DBG("validate(0x%x,%p)=%d", ctx_flags, fmt_arg, ret);
> + if (ret)
> + goto error;
> + }
> +
> + /*
> + * check if buffer format wants to use perfmon
> + * buffer allocation/mapping service
> + */
> + size = 0;
We already did that.
> + if (fmt->fmt_getsize) {
> + ret = (*fmt->fmt_getsize)(ctx_flags, fmt_arg, &size);
> + if (ret) {
> + PFM_DBG("cannot get size ret=%d", ret);
> + goto error;
> + }
> + }
> +
> + if (size) {
> +#ifdef CONFIG_IA64_PERFMON_COMPAT
> + if (mode == PFM_COMPAT)
> + ret = pfm_smpl_buffer_alloc_old(ctx, size, filp);
> + else
> +#endif
> + {
> + ret = pfm_smpl_buffer_alloc(ctx, size);
> + }
Would be better to create more per-arch helpers and get the IA64 stuff out
of perfmon/perfmon.c.
> + if (ret)
> + goto error;
> +
> + }
> +
> + if (fmt->fmt_init) {
> + ret = (*fmt->fmt_init)(ctx, ctx->smpl_addr, ctx_flags,
> + pfm_pmu_conf->num_pmds,
> + fmt_arg);
> + if (ret)
> + goto error_buffer;
> + }
> + return 0;
> +
> +error_buffer:
> + if (!ctx->flags.kapi)
> + pfm_release_buf_space(ctx->smpl_size);
> + /*
> + * we do not call fmt_exit, if init has failed
> + */
> + vfree(ctx->smpl_addr);
> +error:
> + return ret;
> +}
> +
>
> ...
>
> +struct pfm_context *pfm_context_alloc(void)
> +{
> + struct pfm_context *ctx;
> +
> + /*
> + * allocate context structure
> + * the architecture specific portion is allocated
> + * right after the struct pfm_context struct. It is
> + * accessible at ctx_arch = (ctx+1)
> + */
> + ctx = kmem_cache_alloc(pfm_ctx_cachep, SLAB_ATOMIC);
> + if (ctx) {
> + memset(ctx, 0, sizeof(*ctx)+PFM_ARCH_CTX_SIZE);
> + PFM_DBG("alloc ctx @%p", ctx);
> + }
> + return ctx;
> +}
Can we avoid the unreliable SLAB_ATOMIC here?
> +/*
> + * in new mode, we only allocate the kernel buffer, an explicit mmap()
> + * is needed to remap the buffer at the user level
> + */
> +int pfm_smpl_buffer_alloc(struct pfm_context *ctx, size_t rsize)
> +{
> + void *addr;
> + size_t size;
> + int ret;
> +
> + /*
> + * the fixed header + requested size and align to page boundary
> + */
> + size = PAGE_ALIGN(rsize);
> +
> + PFM_DBG("sampling buffer rsize=%zu size=%zu", rsize, size);
> +
> + if (!ctx->flags.kapi) {
> + ret = pfm_reserve_buf_space(size);
> + if (ret) return ret;
newline, please.
> + }
> +
> + addr = vmalloc(size);
> + if (addr == NULL) {
> + PFM_DBG("cannot allocate sampling buffer");
> + goto unres;
> + }
> +
> + memset(addr, 0, size);
> +
> + ctx->smpl_addr = addr;
> + ctx->smpl_size = size;
> +
> + PFM_DBG("kernel smpl buffer @%p", addr);
> +
> + return 0;
> +unres:
> + if (!ctx->flags.kapi)
> + pfm_release_buf_space(size);
> + return -ENOMEM;
> +}
> +
> +static inline u64 pfm_new_pmd_value (struct pfm_pmd *reg, int reset_mode)
> +{
> + u64 val, mask;
> + u64 new_seed, old_seed;
> +
> + val = reset_mode == PFM_PMD_RESET_LONG ? reg->long_reset : reg->short_reset;
> + old_seed = reg->seed;
> + mask = reg->mask;
> +
> + if (reg->flags & PFM_REGFL_RANDOM) {
> + new_seed = carta_random32(old_seed);
> +
> + /* counter values are negative numbers! */
> + val -= (old_seed & mask);
> + if ((mask >> 32) != 0)
> + /* construct a full 64-bit random value: */
> + new_seed |= (u64)carta_random32((u32)(old_seed >> 32)) << 32;
carta_random32 already returns u64. I think neither cast is needed here.
> + reg->seed = new_seed;
> + }
> + reg->lval = val;
> + return val;
> +}
>
> ...
>
> +void pfm_reset_pmds(struct pfm_context *ctx, struct pfm_event_set *set,
> + int reset_mode)
> +{
> + u64 ovfl_mask, hw_val;
> + u64 *cnt_mask, *reset_pmds;
> + u64 val;
> + unsigned int i, max_pmd, not_masked;
> +
> + reset_pmds = set->reset_pmds;
> + max_pmd = pfm_pmu_conf->max_pmd;
> +
> + ovfl_mask = pfm_pmu_conf->ovfl_mask;
> + cnt_mask = pfm_pmu_conf->cnt_pmds;
> + not_masked = ctx->state != PFM_CTX_MASKED;
> +
> + PFM_DBG_ovfl("%s r_pmds=0x%llx not_masked=%d",
> + reset_mode == PFM_PMD_RESET_LONG ? "long" : "short",
> + (unsigned long long)reset_pmds[0],
> + not_masked);
> +
> + pfm_modview_begin(set);
> +
> + for (i = 0; i < max_pmd; i++) {
> +
> + if (pfm_bv_isset(reset_pmds, i)) {
> +
Unneeded newline here (lots of places)
> + val = pfm_new_pmd_value(set->pmds + i,
> + reset_mode);
val = pfm_new_pmd_value(set->pmds + i, reset_mode);
> + set->view->set_pmds[i]= val;
> +
> + if (not_masked) {
> + if (pfm_bv_isset(cnt_mask, i)) {
> + hw_val = val & ovfl_mask;
> + } else {
> + hw_val = val;
> + }
Unneeded braces.
> + pfm_write_pmd(ctx, i, hw_val);
> + }
> + PFM_DBG_ovfl("pmd%u set=%u sval=0x%llx",
> + i,
> + set->id,
> + (unsigned long long)val);
> + }
> + }
> +
> + pfm_modview_end(set);
> +
> + /*
> + * done with reset
> + */
> + bitmap_zero(ulp(reset_pmds), max_pmd);
Let's fix the bitmap code.
> + /*
> + * make changes visible
> + */
> + if (not_masked)
> + pfm_arch_serialize();
> +}
> +
>
> ...
>
> +/*
> + * called from pfm_handle_work() and __pfm_restart()
> + * for system-wide and per-thread context.
> + */
> +static void pfm_resume_after_ovfl(struct pfm_context *ctx)
> +{
> + struct pfm_smpl_fmt *fmt;
> + u32 rst_ctrl;
> + struct pfm_event_set *set;
> + u64 *reset_pmds;
> + void *hdr;
> + int state, ret;
> +
> + hdr = ctx->smpl_addr;
> + fmt = ctx->smpl_fmt;
> + state = ctx->state;
> + set = ctx->active_set;
> + ret = 0;
> +
> + if (hdr) {
> + rst_ctrl = 0;
> + prefetch(hdr);
> + if (fmt->fmt_restart)
> + ret = (*fmt->fmt_restart)(state == PFM_CTX_LOADED,
> + &rst_ctrl, hdr);
> + } else {
> + rst_ctrl= PFM_OVFL_CTRL_RESET;
> + }
> + reset_pmds = set->reset_pmds;
> +
> + PFM_DBG("restart=%d set=%u r_pmds=0x%llx switch=%d ctx_state=%d",
> + ret,
> + set->id,
> + (unsigned long long)reset_pmds[0],
> + !(set->priv_flags & PFM_SETFL_PRIV_SWITCH),
> + state);
> +
> + if (!ret) {
> + /*
> + * switch set if needed
> + */
> + if (set->priv_flags & PFM_SETFL_PRIV_SWITCH) {
> + set->priv_flags &= ~PFM_SETFL_PRIV_SWITCH;
> + pfm_switch_sets(ctx, NULL, PFM_PMD_RESET_LONG, 0);
> + set = ctx->active_set;
I assume there's some locking in place for all of this. If so, it's useful
to mention that in the function's introductory comment block - it's rather
important.
Or stick an assert_spin_locked() in there, which is rather stronger...
> + } else if (rst_ctrl & PFM_OVFL_CTRL_RESET) {
> + if (!bitmap_empty(ulp(set->reset_pmds), pfm_pmu_conf->max_pmd))
> + pfm_reset_pmds(ctx, set, PFM_PMD_RESET_LONG);
> + }
> +
> + if (!(rst_ctrl & PFM_OVFL_CTRL_MASK)) {
> + pfm_unmask_monitoring(ctx);
> + } else {
> + PFM_DBG("stopping monitoring?");
> + }
braces...
> + ctx->state = PFM_CTX_LOADED;
> + }
> + ctx->flags.can_restart = 0;
> +}
> +
>
> ...
>
> +/*
> + * pfm_handle_work() can be called with interrupts enabled
> + * (TIF_NEED_RESCHED) or disabled. The down_interruptible
> + * call may sleep, therefore we must re-enable interrupts
> + * to avoid deadlocks. It is safe to do so because this function
> + * is called ONLY when returning to user level (PUStk=1), in which case
> + * there is no risk of kernel stack overflow due to deep
> + * interrupt nesting.
> + *
> + * input:
> + * - current task pointer
> + */
What's PUStk?
> +void __pfm_handle_work(struct task_struct *task)
> +{
> + struct pfm_context *ctx;
> + unsigned long flags, dummy_flags;
> + unsigned int reason;
> + int ret;
> +
> + ctx = task->pfm_context;
> + if (ctx == NULL) {
> + PFM_ERR("handle_work [%d] has no ctx", task->pid);
> + return;
> + }
> +
> + BUG_ON(ctx->flags.system);
> +
> + spin_lock_irqsave(&ctx->lock, flags);
> +
> + clear_thread_flag(TIF_NOTIFY_RESUME);
> +
> + /*
> + * extract reason for being here and clear
> + */
> + reason = ctx->flags.trap_reason;
> +
> + if (reason == PFM_TRAP_REASON_NONE)
> + goto nothing_to_do;
> +
> + ctx->flags.trap_reason = PFM_TRAP_REASON_NONE;
> +
> + PFM_DBG("reason=%d state=%d", reason, ctx->state);
> +
> + /*
> + * must be done before we check for simple-reset mode
> + */
> + if (ctx->state == PFM_CTX_ZOMBIE)
> + goto do_zombie;
> +
> + if (reason == PFM_TRAP_REASON_RESET)
> + goto skip_blocking;
> +
> + /*
> + * restore interrupt mask to what it was on entry.
> + * Could be enabled/diasbled.
> + */
> + spin_unlock_irqrestore(&ctx->lock, flags);
> +
> + /*
> + * force interrupt enable because of down_interruptible()
> + */
> + local_irq_enable();
> +
> + PFM_DBG("before block sleeping");
> +
> + /*
> + * may go through without blocking on SMP systems
> + * if restart has been received already by the time we call down()
> + */
> + ret = wait_for_completion_interruptible(&ctx->restart_complete);
> +
> + PFM_DBG("after block sleeping ret=%d", ret);
> +
> + /*
> + * lock context and mask interrupts again
> + * We save flags into a dummy because we may have
> + * altered interrupts mask compared to entry in this
> + * function.
> + */
> + spin_lock_irqsave(&ctx->lock, dummy_flags);
> +
> + if (ctx->state == PFM_CTX_ZOMBIE)
> + goto do_zombie;
> +
> + /*
> + * in case of interruption of down() we don't restart anything
> + */
> + if (ret < 0)
> + goto nothing_to_do;
> +
> +skip_blocking:
> + pfm_resume_after_ovfl(ctx);
> +
> +nothing_to_do:
> +
> + /*
> + * restore flags as they were upon entry
> + */
> + spin_unlock_irqrestore(&ctx->lock, flags);
> + return;
> +
> +do_zombie:
> + PFM_DBG("context is zombie, bailing out");
> +
> + __pfm_unload_context(ctx, 0);
> +
> + /*
> + * enable interrupt for vfree()
> + */
> + local_irq_enable();
> +
> + /*
> + * actual context free
> + */
> + pfm_context_free(ctx);
> +
> + /*
> + * restore interrupts as they were upon entry
> + */
> + local_irq_restore(flags);
> +}
Yeah, the local_irq handling here is unpleasing.
> +/*
> + * called only from exit_thread(): task == current
> + * we come here only if current has a context
> + * attached (loaded or masked or zombie)
> + */
> +void __pfm_exit_thread(struct task_struct *task)
> +{
> + struct pfm_context *ctx;
> + unsigned long flags;
> + int free_ok = 0;
> +
> + ctx = task->pfm_context;
> +
> + BUG_ON(ctx->flags.system);
> +
> + spin_lock_irqsave(&ctx->lock, flags);
> +
> + PFM_DBG("state=%d", ctx->state);
> +
> + /*
> + * __pfm_unload_context() cannot fail
> + * in the context states we are interested in
> + */
> + switch(ctx->state) {
^ space, please.
> + case PFM_CTX_LOADED:
> + case PFM_CTX_MASKED:
> + __pfm_unload_context(ctx, 0);
> + pfm_end_notify_user(ctx);
> + break;
> + case PFM_CTX_ZOMBIE:
> + __pfm_unload_context(ctx, 0);
> + free_ok = 1;
> + break;
> + default:
> + BUG_ON(ctx->state != PFM_CTX_LOADED);
> + break;
> + }
We normally indent switch statement bodies one tabstop less than this.
> + spin_unlock_irqrestore(&ctx->lock, flags);
> +
> + /*
> + * All memory free operations (especially for vmalloc'ed memory)
> + * MUST be done with interrupts ENABLED.
> + */
> + if (free_ok)
> + pfm_context_free(ctx);
> +}
> +
> +/*
> + * this function is called from pfm_init()
> + * pfm_pmu_conf is NULL at this point
> + */
> +void __cpuinit pfm_init_percpu (void *dummy)
^ no space ;)
> +{
> + pfm_arch_init_percpu();
> +}
> +
> +/*
> + * global initialization routine, executed only once
> + */
> +int __init pfm_init(void)
> +{
> + int ret;
> +
> + PFM_LOG("version %u.%u", PFM_VERSION_MAJ, PFM_VERSION_MIN);
> +
> + pfm_ctx_cachep = kmem_cache_create("pfm_context",
> + sizeof(struct pfm_context)+PFM_ARCH_CTX_SIZE,
> + SLAB_HWCACHE_ALIGN, 0, NULL, NULL);
> + if (pfm_ctx_cachep == NULL) {
> + PFM_ERR("cannot initialize context slab");
> + goto error_disable;
> + }
> + ret = pfm_sets_init();
> + if (ret)
> + goto error_disable;
> +
> +
> + if (pfm_sysfs_init())
> + goto error_disable;
> +
> + /*
> + * one time, global initialization
> + */
> + if (pfm_arch_initialize())
> + goto error_disable;
> +
> + init_pfm_fs();
> +
> + /*
> + * per cpu initialization (interrupts must be enabled)
> + */
> + on_each_cpu(pfm_init_percpu, NULL, 1, 1);
> +
> + return 0;
> +error_disable:
> + return -1;
> +}
Three of these error paths will leak *pfm_ctx_cachep. The kernel will
panic next time the module is loaded (if this is a loadable module..)
> +/*
> + * must use subsys_initcall() to ensure that the perfmon2 core
> + * is initialized before any PMU description module when they are
> + * compiled in.
> + */
> +subsys_initcall(pfm_init);
> +
> +int __pfm_start(struct pfm_context *ctx, struct pfarg_start *start)
> +{
> + struct task_struct *task, *owner_task;
> + struct pfm_event_set *new_set, *old_set;
> + u64 now_itc;
> + int is_self, flags;
> +
> + task = ctx->task;
> +
> + /*
> + * context must be loaded.
> + * we do not support starting while in MASKED state
> + * (mostly because of set switching issues)
> + */
> + if (ctx->state != PFM_CTX_LOADED)
> + return -EINVAL;
> +
> + old_set = new_set = ctx->active_set;
> +
> + /*
> + * always the case for system-wide
> + */
> + if (task == NULL)
> + task = current;
> +
> + is_self = task == current;
> +
> + /*
> + * argument is provided?
> + */
> + if (start) {
> + /*
> + * find the set to load first
> + */
> + new_set = pfm_find_set(ctx, start->start_set, 0);
> + if (new_set == NULL) {
> + PFM_DBG("event set%u does not exist",
> + start->start_set);
> + return -EINVAL;
> + }
> + }
> +
> + PFM_DBG("cur_set=%u req_set=%u",
> + old_set->id,
> + new_set->id);
> +
> + /*
> + * if we need to change the active set we need
> + * to check if we can access the PMU
> + */
> + if (new_set != old_set) {
> + owner_task = __get_cpu_var(pmu_owner);
>From this I'll assume that either a) this function is always called under
some locking (but which?) or b) it hasn't been tested with
CONFIG_DEBUG_PREEMPT.
> + /*
> + * system-wide: must run on the right CPU
> + * per-thread : must be the owner of the PMU context
> + *
> + * pfm_switch_sets() returns with monitoring stopped
> + */
> + if (is_self) {
> + pfm_switch_sets(ctx, new_set, PFM_PMD_RESET_LONG, 1);
> + } else {
> + /*
> + * In a UP kernel, the PMU may contain the state
> + * of the task we want to operate on, yet the task
> + * may be switched out (lazy save). We need to save
> + * current state (old_set), switch active_set and
> + * mark it for reload.
> + */
> + if (owner_task == task) {
> + pfm_modview_begin(old_set);
> + pfm_save_pmds(ctx, old_set);
> + pfm_modview_end(old_set);
> + }
> + ctx->active_set = new_set;
> + new_set->view->set_status |= PFM_SETVFL_ACTIVE;
> + new_set->priv_flags |= PFM_SETFL_PRIV_MOD_BOTH;
> + }
> + }
> + /*
> + * mark as started, must be done before calling
> + * pfm_arch_start()
> + */
> + ctx->flags.started = 1;
> +
> + /*
> + * at this point, monitoring is:
> + * - stopped if we switched set (self-monitoring)
> + * - stopped if never started
> + * - started if calling pfm_start() in sequence
> + */
> + now_itc = pfm_arch_get_itc();
> + flags = new_set->flags;
> +
> + if (is_self) {
> + unsigned long info;
> + if (flags & PFM_SETFL_TIME_SWITCH)
> + info = PFM_CPUINFO_TIME_SWITCH;
> + else
> + info = 0;
> +
> + __get_cpu_var(pfm_syst_info) = info;
> + }
> + /*
> + * in system-wide, the new_set may EXCL_IDLE, in which
> + * case pfm_start() must actually stop monitoring
> + */
> + if (current->pid == 0 && (flags & PFM_SETFL_EXCL_IDLE))
> + pfm_arch_stop(task, ctx, new_set);
> + else
> + pfm_arch_start(task, ctx, new_set);
> +
> + /*
> + * we restart total duration even if context was
> + * already started. In that case, counts are simply
> + * reset.
> + *
> + * For system-wide, we start counting even when we exclude
> + * idle and pfm_start() called by idle.
> + *
> + * For per-thread, if not self-monitoring, the statement
> + * below will have no effect because thread is stopped.
> + * The field is reset of ctxsw in.
> + *
> + * if monitoring is masked (MASKED), this statement
> + * will be overriden in pfm_unmask_monitoring()
> + */
> + ctx->duration_start = now_itc;
> + new_set->duration_start = now_itc;
> +
> + return 0;
> +}
>
> ...
>
> +/*
> + * XXX: interrupts are masked yet monitoring may be active. Hence they
> + * might be a counter overflow during the call. It will be kept pending
> + * and we might return inconsistent unless we check the state of the counter
> + * and compensate for the overflow. Note that we will not loose a sample
> + * when sampling, however, there may be an issue with simple counting and
> + * virtualization.
> + */
What issue?
> +int __pfm_read_pmds(struct pfm_context *ctx, struct pfarg_pmd *req, int count)
> +{
> +
>
> ...
>
> +int __pfm_write_pmds(struct pfm_context *ctx, struct pfarg_pmd *req, int count,
> + int compat)
> +{
>
> ...
>
> + bitmap_or(ulp(set->used_pmds),
> + ulp(set->used_pmds),
> + ulp(reset_pmds), max_pmd);
argh.
> +/*
> + * should not call when task == current
> + */
> +static int pfm_bad_permissions(struct task_struct *task)
> +{
> + /* inspired by ptrace_attach() */
> + PFM_DBG("cur: euid=%d uid=%d gid=%d task: euid=%d "
> + "suid=%d uid=%d egid=%d cap:%d sgid=%d",
> + current->euid,
> + current->uid,
> + current->gid,
> + task->euid,
> + task->suid,
> + task->uid,
> + task->egid,
> + task->sgid, capable(CAP_SYS_PTRACE));
> +
> + return ((current->uid != task->euid)
> + || (current->uid != task->suid)
> + || (current->uid != task->uid)
> + || (current->gid != task->egid)
> + || (current->gid != task->sgid)
> + || (current->gid != task->gid)) && !capable(CAP_SYS_PTRACE);
> +}
A comment which describes the design decisions behind this permission check
would be a pretty important improvement.
I wonder if selinux wants to get this deep into things.
> +
> +/*
> + * cannot attach if :
> + * - kernel task
> + * - task not owned by caller
> + * - task incompatible with context mode
> + */
there's a comment.
What does "incompatible with context mode" mean?
> +static int pfm_task_incompatible(struct pfm_context *ctx,
> + struct task_struct *task)
> +{
> + /*
> + * no kernel task or task not owned by caller
> + */
> + if (!task->mm) {
> + PFM_DBG("cannot attach to kernel thread [%d]", task->pid);
> + return -EPERM;
> + }
> +
> + if (pfm_bad_permissions(task)) {
> + PFM_DBG("no permission to attach to [%d]", task->pid);
> + return -EPERM;
> + }
> +
> + /*
> + * cannot block in self-monitoring mode
> + */
> + if (ctx->flags.block && task == current) {
> + PFM_DBG("cannot load a in blocking mode on self for [%d]",
tpyo.
> + task->pid);
> + return -EINVAL;
> + }
> +
> + if (task->state == EXIT_ZOMBIE || task->state == EXIT_DEAD) {
That isn't right. These things are recorded in task_struct.exit_state, not in
task_struct.state.
> + PFM_DBG("cannot attach to zombie/dead task [%d]", task->pid);
> + return -EBUSY;
> + }
> +
> + /*
> + * always ok for self
> + */
> + if (task == current)
> + return 0;
> +
> + if ((task->state != TASK_STOPPED) && (task->state != TASK_TRACED)) {
> + PFM_DBG("cannot attach to non-stopped task [%d] state=%ld",
> + task->pid, task->state);
> + return -EBUSY;
> + }
> + PFM_DBG("before wait_inactive() task [%d] state=%ld",
> + task->pid, task->state);
> + /*
> + * make sure the task is off any CPU
> + */
> + wait_task_inactive(task);
There it is again. This is a busywait.
> + PFM_DBG("after wait_inactive() task [%d] state=%ld",
> + task->pid, task->state);
> + /* more to come... */
> +
> + return 0;
> +}
> +static int pfm_get_task(struct pfm_context *ctx, pid_t pid,
> + struct task_struct **task)
> +{
> + struct task_struct *p = current;
> + int ret;
> +
> + /* XXX: need to add more checks here */
> + if (pid < 2)
> + return -EPERM;
;)
What are we actually trying to do here?
> + if (pid != current->pid) {
> +
> + read_lock(&tasklist_lock);
> +
> + p = find_task_by_pid(pid);
> +
> + /* make sure task cannot go away while we operate on it */
> + if (p)
> + get_task_struct(p);
> +
> + read_unlock(&tasklist_lock);
> +
> + if (p == NULL)
> + return -ESRCH;
> + }
> +
> + ret = pfm_task_incompatible(ctx, p);
> + if (!ret) {
> + *task = p;
> + } else if (p != current) {
> + put_task_struct(p);
> + }
braces.
> + return ret;
> +}
> +
> +static int pfm_check_task_exist(struct pfm_context *ctx)
> +{
> + struct task_struct *g, *t;
> + int ret = -ESRCH;
> +
> + read_lock(&tasklist_lock);
> +
> + do_each_thread (g, t) {
^ space
> + if (t->pfm_context == ctx) {
> + ret = 0;
> + break;
> + }
> + } while_each_thread (g, t);
again
> + read_unlock(&tasklist_lock);
> +
> + PFM_DBG("ret=%d ctx=%p", ret, ctx);
> +
> + return ret;
> +}
These functions are expensive. Hopefully not called much?
> +
> +static int pfm_load_context_thread(struct pfm_context *ctx, pid_t pid,
> + struct pfm_event_set *set)
> +{
> + struct task_struct *task = NULL;
> + struct pfm_context *old;
> + u32 set_flags;
> + unsigned long info;
> + int ret, state;
> +
> + state = ctx->state;
> + set_flags = set->flags;
> +
> + PFM_DBG("load_pid [%d] set=%u runs=%llu set_flags=0x%x",
> + pid,
> + set->id,
> + (unsigned long long)set->view->set_runs,
> + set_flags);
> +
> + if (ctx->flags.block && pid == current->pid) {
> + PFM_DBG("cannot use blocking mode in while self-monitoring");
> + return -EINVAL;
> + }
> +
> + ret = pfm_get_task(ctx, pid, &task);
> + if (ret) {
> + PFM_DBG("load_pid [%d] get_task=%d", pid, ret);
> + return ret;
> + }
> +
> + ret = pfm_arch_load_context(ctx, task);
> + if (ret) {
> + put_task_struct(task);
Further down, we only do put_task_struct() if task!=current.
> + return ret;
> + }
> +
> + /*
> + * now reserve the session
> + */
> + ret = pfm_reserve_session(ctx, -1);
> + if (ret)
> + goto error;
> +
> + /*
> + * task is necessarily stopped at this point.
> + *
> + * If the previous context was zombie, then it got removed in
> + * pfm_ctxswout_thread(). Therefore we should not see it here.
> + * If we see a context, then this is an active context
> + *
> + */
> + PFM_DBG("before cmpxchg() old_ctx=%p new_ctx=%p",
> + task->pfm_context, ctx);
> +
> + ret = -EEXIST;
> +
> + old = cmpxchg(&task->pfm_context, NULL, ctx);
> + if (old != NULL) {
> + PFM_DBG("load_pid [%d] has already a context "
> + "old=%p new=%p cur=%p",
> + pid,
> + old,
> + ctx,
> + task->pfm_context);
> + goto error_unres;
> + }
> +
> + /*
> + * link context to task
> + */
> + ctx->task = task;
> + set_tsk_thread_flag(task, TIF_PERFMON);
> +
> + /*
> + * commit active set
> + */
> + ctx->active_set = set;
> +
> + pfm_modview_begin(set);
> +
> + set->view->set_runs++;
Locking for this increment?
> + set->view->set_status |= PFM_SETVFL_ACTIVE;
and for this?
> + /*
> + * self-monitoring
> + */
> + if (task == current) {
> +#ifndef CONFIG_SMP
> + struct pfm_context *ctxp;
> +
> + /*
> + * in UP per-thread, due to lazy save
> + * there could be a context from another
> + * task. We need to push it first before
> + * installing our new state
> + */
> + ctxp = __get_cpu_var(pmu_ctx);
This code does smp_processor_id() a lot. Hopefully it's all preempt-correct..
> + if (ctxp) {
> + struct pfm_event_set *setp;
> + setp = ctxp->active_set;
> + pfm_modview_begin(setp);
> + pfm_save_pmds(ctxp, setp);
> + setp->view->set_status &= ~PFM_SETVFL_ACTIVE;
> + pfm_modview_end(setp);
> + /*
> + * do not clear ownership because we rewrite
> + * right away
> + */
> + }
> +#endif
> + pfm_set_last_cpu(ctx, smp_processor_id());
> + pfm_inc_activation();
> + pfm_set_activation(ctx);
> +
> + /*
> + * setting PFM_CPUINFO_TIME_SWITCH, triggers
> + * further checking if __pfm_handle_switch_timeout().
> + * switch timeout is effectively decremented only once
> + * monitoring has been activated via pfm_start() or
> + * any user level equivalent.
> + */
> + if (set_flags & PFM_SETFL_TIME_SWITCH) {
> + info = PFM_CPUINFO_TIME_SWITCH;
> + __get_cpu_var(pfm_syst_info) = info;
> + }
> + /*
> + * load all PMD from set
> + * load all PMC from set
> + */
> + pfm_arch_restore_pmds(ctx, set);
> + pfm_arch_restore_pmcs(ctx, set);
> +
> + /*
> + * set new ownership
> + */
> + pfm_set_pmu_owner(task, ctx);
> +
> + PFM_DBG("context loaded on PMU for [%d] TIF=%d", task->pid, test_tsk_thread_flag(task, TIF_PERFMON));
> + } else {
> +
> + /* force a full reload */
> + ctx->last_act = PFM_INVALID_ACTIVATION;
> + pfm_set_last_cpu(ctx, -1);
> + set->priv_flags |= PFM_SETFL_PRIV_MOD_BOTH;
> + PFM_DBG("context loaded next ctxswin for [%d]", task->pid);
> + }
> +
> + pfm_modview_end(set);
> +
> + ret = 0;
> +
> +error_unres:
> + if (ret)
> + pfm_release_session(ctx, -1);
> +error:
> + /*
> + * release task, there is now a link with the context
> + */
> + if (task != current) {
> + put_task_struct(task);
> +
> + if (!ret) {
> + ret = pfm_check_task_exist(ctx);
> + if (ret) {
> + ctx->state = PFM_CTX_UNLOADED;
> + ctx->task = NULL;
> + }
> + }
> + }
> + return ret;
> +}
>
> ...
>
> +int __pfm_unload_context(struct pfm_context *ctx, int defer_release)
It's fairly unfruitful reviewing functions when you don't know what they
do. Comments really help.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
