Re: Specify devices manually in exotic environment

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 23 Aug 2006 10:31:06 +0200, Denis Vlasenko <[email protected]> wrote:

More info? What information is not passed?

Well, usually the BIOS enables access to the IDE bus, but not with me. But how does WinNT work on the T20 then..? Also lspci does not show any device identifiers -- just loads of cryptic numbers..

mknod /dev/root b "$ROOTMAJ" "$ROOTMIN"

This also did not help -- 'cat: /dev/root: No such device or address'. Major/minor is 4/0, as recommended in the kernel docs for /dev/root.

So where can I find my flash memory..? Again, with GRUB I just had to specify the device address (0x80) and the kernel/initrd positions in sector syntax, which works fine. Maybe I can do the same in Linux with my ext2 partition, to specify the start and end sectors ('Specify drives manually..'). But where to start?

Here's some other info (typos may be included):


/proc/devices:
**************
Character devices:
  1 mem
  2 pty
  3 ttyp
  4 /dev/vc/0
  4 tty
  4 ttyS
  5 /dev/tty
  5 /dev/console
  5 /dev/ptmx
  7 vcs
 10 misc
 13 input
 14 sound
 29 fb
 89 i2c
 90 mtd
116 alsa
128 ptm
136 pts
180 usb
189 usb_device
226 drm

Block devices:
  1 ramdisk
  7 loop
  8 sd
 44 ftl
 65 sd
 66 sd
 67 sd
 68 sd
 69 sd
 70 sd
 71 sd
 93 nftl
128 sd      <--    Is this my 0x80 device..?
129 sd      <--    ..then this would be my 1st part.. [1]
130 sd
131 sd
132 sd
133 sd
134 sd
135 sd

[1] ..but how to access that block device then? What major/minor combi is needed here..?


lspci:
******
00:00.0 0600: 1078:0001
00:0f.0 0200: 100b:0020
00:12.0 0601: 1078:0100 (rev 30)
00:12.1 0680: 1078:0101
00:12.2 0101: 1078:0102
00:12.3 0401: 1078:0103
00:12.4 0300: 1078:0104
00:13.0 0c03: 0e11:a0f8 (rev 06)


/proc/iomem:
************
00000000-0008efff : System RAM
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000cc000-000ccfff : 0000:00:13.0
  000cc000-000ccfff : ohci_hcd
000f0000-000fffff : System ROM
00100000-07d0ffff : System RAM
  00100000-00303920 : Kernel code
  00303921-003cdeb3 : Kernel data
10000000-1000ffff : 0000:00:0f.0
10010000-10010fff : 0000:00:0f.0
  10010000-10010fff : natsemi
40010000-40010fff : 0000:00:12.4
40011000-4001107f : 0000:00:12.3
40012000-400120ff : 0000:00:12.1


Hope this helps.. somehow.

Cheers, milahu
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux