Re: PROBLEM: FUSE unmount breaks serial terminal line

[Joerg Sommrey <jo@sommrey.de>]

On Tue, Aug 22, 2006 at 10:57:15AM +0200, Miklos Szeredi wrote:
> > > > something in FUSE breaks serial devices.  I found this issue 
> > > > using gphotofs, don't know if any other FUSE impementation has similar
> > > > effects.  The problem is: from the moment the FUSE filesystem is unmounted,
> > > > a process that read()s on a serial device /dev/ttyS? gets an EOF
> > > > returncode.  
> > > > 
> > > > Here is the tail of the output from "strace -tt cat /dev/ttyS0" when the
> > > > FUSE fs was unmounted:
> > > > 
> > > > 19:41:46.513143 open("/dev/ttyS0", O_RDONLY|O_LARGEFILE) = 3
> > > > 19:41:46.513373 fstat64(3, {st_mode=S_IFCHR|0660, st_rdev=makedev(4, 64), ...}) = 0
> > > > 19:41:46.513552 read(3, "", 4096)       = 0
> > > > 19:42:49.854367 close(3)                = 0
> > > > 19:42:49.860663 close(1)                = 0
> > > > 19:42:49.860793 exit_group(0)           = ?
> > > > 
> > > > Found this on x86 with kernels 2.6.16 and 2.6.17.
> > > > 
> > > > Any ideas?
> > > 
> > > Likely a userspace issue.  Can you please attach a strace (strace -f
> > > -p `pidof gphotofs`) to the gphotofs process just before doing the
> > > unmount?
> > 
> > Here it is together with the "cat" strace.  cat receives EOF *after*
> > fusermount has exited - if it matters.
> 
> Yes, I think it matters.  I think one of those USBDEVFS ioctls might
> be responsible.  These are probably invoked by the libgphoto2 cleanup
> routines called when the filesystem exits.
> 
> Can you verify with a non-FUSE application (gphoto2, gtkam) that the
> same thing happens on exit?
> 

Tested both gphoto2 and gtkam without any problems. There is no impact
on the serial lines.

NB: The *real* trouble I have is with ntpd and a reference clock
attached to /dev/ttyS1.  ntpd enters a busy loop reading ttyS1, stops
working and eats up 100% CPU.  

Thanks for your investigations.  Any other idea?

-jo

-- 
-rw-r--r-- 1 jo users 62 2006-08-22 17:50 /home/jo/.signature
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/