sym53c8xx PCI card broken in 2.6.18

[David Johnson <dj@david-web.co.uk>]

Hi all,

I'm running a Sun Ultra Enterprise 450 (SPARC64) machine which has an on-board 
SCSI controller and a PCI SCSI controller, both supported by the sym53c8xx 
driver.

With 2.6.17.9 (and earlier) SCSI works perfectly, but with 2.6.18-rc4 and 
2.6.18-rc4-git1 I'm getting errors on boot for all devices attached to the 
PCI card, but all the devices attached to the on-board controller are 
detected and configured OK.

lspci identifies the on-board controller as:
SCSI storage controller: LSI Logic / Symbios Logic 53c875 (rev 03)
and the PCI controller as:
SCSI storage controller: LSI Logic / Symbios Logic 53c875 (rev 14)

Here's the output from initialisation of the devices on the PCI card (repeated 
for every device):
scsi2: sym-2.2.3
scsi 2:0:0:0 ABORT operation started
scsi 2:0:0:0 ABORT operation timed out
scsi 2:0:0:0 DEVICE RESET operation started
scsi 2:0:0:0 DEVICE RESET operation timed out
scsi 2:0:0:0 BUS RESET operation started
scsi 2:0:0:0 BUS RESET operation timed out
scsi 2:0:0:0 HOST RESET operation started
sym2: SCSI bus has been reset
scsi 2:0:0:0 HOST RESET operation timed out
scsi: device offlined - not ready after error recovery

The devices on the PCI controller are a mixture of 'Fujitsu MAG3182L SUN18G' 
and 'Seagate ST318203LSUN18G' drives.

Looking through the changelogs between 2.6.17.9 and 2.6.18-rc4-git1, I can't 
see any changes to sym53c8xx, so I'm guessing this has been caused by some 
generic SCSI subsystem change. Let me know if I can do any more to debug.

Regards,
David.

-- 
David Johnson
www.david-web.co.uk - My Personal Website
www.penguincomputing.co.uk - Need a Web Developer?
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/