Re: Serial issue

[Lee Revell <rlrevell@joe-job.com>]

On Fri, 2006-08-18 at 10:44 -0500, Paul Fulghum wrote:
> On Thu, 2006-08-17 at 20:47 -0400, Lee Revell wrote:
> > I've found a weird serial bug.  My host is a Via EPIA M-6000 running
> > 2.6.17 connected to a PPC Yosemite board running 2.6.13. 
> > 
> > In all cases the serial console works great.  But, with the default
> > setting of IRQ 4, Kermit file transfers via the serial interface simply
> > time out.  However if I use polling mode (setserial /dev/ttyS0 irq 0 on
> > the host), file transfers work.
> > 
> > When set to IRQ 4, the interrupt count does increase.
> > 
> > # cat /proc/tty/driver/serial 
> > serinfo:1.0 driver revision:
> > 0: uart:16550A port:000003F8 irq:4 tx:267 rx:667 DSR|CD
> > [...]
> > 
> > Any ideas?  I'm guessing it might be a quirk of the VIA chipset?
> 
> You mention serial console. Hasn't there been some changes
> related to reenabling the THRE interrupt after sending
> console data? IIRC the changes fixed transmit stalls on
> some machines but broke things on other machine.
> 
> Can you try disabling the serial console and see
> if the file transfer starts working?
> 

I tried it with the serial console inactive (not disabled) and file
transfers don't work whether I set IRQ 0 or 4.  Maybe I'm doing it wrong
- I connected to the target via SSH and ran "gkermit -r" then ran
ckermit locally and issued a "send file.txt" command.

Normally I connect to the target with "kermit -c" which gives me a
serial console, then issue a "gkermit -r", then escape to my local
Kermit and issue the send file command.

Lee

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/