[PATCH 13/13] IB/ehca: makefiles/kconfig

[Roland Dreier <rolandd@cisco.com>]

 drivers/infiniband/Kconfig          |    1 +
 drivers/infiniband/Makefile         |    1 +
 drivers/infiniband/hw/ehca/Kconfig  |   12 ++++++++++++
 drivers/infiniband/hw/ehca/Makefile |   18 ++++++++++++++++++
 4 files changed, 32 insertions(+), 0 deletions(-)

diff --git a/drivers/infiniband/Kconfig b/drivers/infiniband/Kconfig
index 69a53d4..fd2d528 100644
--- a/drivers/infiniband/Kconfig
+++ b/drivers/infiniband/Kconfig
@@ -36,6 +36,7 @@ config INFINIBAND_ADDR_TRANS
 
 source "drivers/infiniband/hw/mthca/Kconfig"
 source "drivers/infiniband/hw/ipath/Kconfig"
+source "drivers/infiniband/hw/ehca/Kconfig"
 
 source "drivers/infiniband/ulp/ipoib/Kconfig"
 
diff --git a/drivers/infiniband/Makefile b/drivers/infiniband/Makefile
index c7ff58c..893bee0 100644
--- a/drivers/infiniband/Makefile
+++ b/drivers/infiniband/Makefile
@@ -1,6 +1,7 @@
 obj-$(CONFIG_INFINIBAND)		+= core/
 obj-$(CONFIG_INFINIBAND_MTHCA)		+= hw/mthca/
 obj-$(CONFIG_IPATH_CORE)		+= hw/ipath/
+obj-$(CONFIG_INFINIBAND_EHCA)		+= hw/ehca/
 obj-$(CONFIG_INFINIBAND_IPOIB)		+= ulp/ipoib/
 obj-$(CONFIG_INFINIBAND_SRP)		+= ulp/srp/
 obj-$(CONFIG_INFINIBAND_ISER)		+= ulp/iser/
diff --git a/drivers/infiniband/hw/ehca/Kconfig b/drivers/infiniband/hw/ehca/Kconfig
new file mode 100644
index 0000000..12285d0
--- /dev/null
+++ b/drivers/infiniband/hw/ehca/Kconfig
@@ -0,0 +1,12 @@
+config INFINIBAND_EHCA
+       tristate "eHCA support"
+       depends on IBMEBUS && INFINIBAND
+       ---help---
+       This is a low level device driver for the IBM GX based Host channel
+       adapters (HCAs).
+
+config INFINIBAND_EHCA_SCALING
+	bool "Scaling support (EXPERIMENTAL)"
+	depends on IBMEBUS && INFINIBAND_EHCA && HOTPLUG_CPU && EXPERIMENTAL
+	---help---
+	eHCA scaling support schedules the CQ callbacks to different CPUs.
diff --git a/drivers/infiniband/hw/ehca/Makefile b/drivers/infiniband/hw/ehca/Makefile
new file mode 100644
index 0000000..70032cf
--- /dev/null
+++ b/drivers/infiniband/hw/ehca/Makefile
@@ -0,0 +1,18 @@
+#  Authors: Heiko J Schick <schickhj@de.ibm.com>
+#           Christoph Raisch <raisch@de.ibm.com>
+#           Joachim Fenkes <fenkes@de.ibm.com>
+#
+#  Copyright (c) 2005 IBM Corporation
+#
+#  All rights reserved.
+#
+#  This source code is distributed under a dual license of GPL v2.0 and OpenIB BSD.
+
+obj-$(CONFIG_INFINIBAND_EHCA) += hcad_mod.o
+
+
+hcad_mod-objs  = ehca_main.o ehca_hca.o ehca_mcast.o ehca_pd.o ehca_av.o ehca_eq.o \
+		 ehca_cq.o ehca_qp.o ehca_sqp.o ehca_mrmw.o ehca_reqs.o ehca_irq.o \
+		 ehca_uverbs.o ipz_pt_fn.o hcp_if.o hcp_phyp.o
+
+CFLAGS += -DEHCA_USE_HCALL -DEHCA_USE_HCALL_KERNEL
-- 
1.4.1

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/