Re: [PATCH,RFC]: acpi,backlight: MSI S270 - driver, second try

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 17.08.06 15:21, Pavel Machek ([email protected]) wrote:

> > This patch applies to 2.6.17 and requires the ACPI ec_transaction()
> > patch I posted earlier:
> > 
> > http://marc.theaimsgroup.com/?l=linux-acpi&m=115517193511970&w=2
> > 
> > Please comment and/or apply!
> 
> Looks ok to me...

Thanks!

> 
> > +static int auto_brightness;
> > +module_param(auto_brightness, int, 0);
> > +MODULE_PARM_DESC(auto_brightness, "Enable automatic brightness control (0: disabled; 1: enabled; 2: don't touch)");
> > +
> > +/*** Hardware access ***/
> > +
> > +static const uint8_t lcd_table[MSI_LCD_LEVEL_MAX] = {
> > +        0x00, 0x1f, 0x3e, 0x5d, 0x7c, 0x9b, 0xba, 0xd9, 0xf8
> > +};
> 
> Can we get 0xf8 levels and simplify code while we are at it?

Unfortunately not. The hardware only supports 9 levels of
brightness. 

However, I guess I could multiply the brightness level with 31 instead
of using the translation table above. 

I will fix that.

> > +        if ((result = ec_transaction(MSI_EC_COMMAND_LCD_LEVEL, &wdata, 1, &rdata, 1)) < 0)
> > +                return result;
> 
> Please split this into two lines.
> 
> result = ...;
> if (result.....)

Will do.

> > +static DEVICE_ATTR(bluetooth, 0444, show_bluetooth, NULL);
> > +static DEVICE_ATTR(wlan, 0444, show_wlan, NULL);
> 
> So bluetooth and wlan basically mirror physical switch state? Should
> we make these switches available through input subsystem one day?

Yes. Actually I've already been discussing with Ivo how to extend the
rfkill API to tell userspace whether an rfkill device is actually for
Bluetooth, for wlan, for uwb and so on. I will update my S270 code as
soon as rfkill enters the kernel to support this new API properly. The
driver will then register two rfkill devices, one for Bluetooth and
one for WLAN.

Lennart

-- 
Lennart Poettering; lennart [at] poettering [dot] net
ICQ# 11060553; GPG 0x1A015CC4; http://0pointer.net/lennart/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux