[PATCH 5/7] ip1000: Modify coding style of ipg_config_autoneg()

[Jesse Huang <jesse@icplus.com.tw>]

From: Jesse Huang <jesse@icplus.com.tw>

This is only coding style modify for ipg_config_autoneg(). Thanks for the
suggestion form Francois.

Change Logs:
    Modify coding style of ipg_config_autoneg()

---

 drivers/net/ipg.c |   17 ++++++++++-------
 1 files changed, 10 insertions(+), 7 deletions(-)

737498ca620437d8179e21be4d5220333066cbbd
diff --git a/drivers/net/ipg.c b/drivers/net/ipg.c
index f859107..be96f93 100644
--- a/drivers/net/ipg.c
+++ b/drivers/net/ipg.c
@@ -491,11 +491,13 @@ static int ipg_config_autoneg(struct net
 	int fullduplex;
 	int txflowcontrol;
 	int rxflowcontrol;
+	long MacCtrlValue;
 
 	IPG_DEBUG_MSG("_config_autoneg\n");
 
 	asicctrl = ioread32(ioaddr + ASIC_CTRL);
-	phyctrl = ioread32(ioaddr + PHY_CTRL);
+   	phyctrl = ioread8(ioaddr + PHY_CTRL);
+   	MacCtrlValue = ioread32(ioaddr + MAC_CTRL);
 
 	/* Set flags for use in resolving auto-negotation, assuming
 	 * non-1000Mbps, half duplex, no flow control.
@@ -547,22 +549,22 @@ static int ipg_config_autoneg(struct net
 		/* Configure IPG for full duplex operation. */
 		printk(KERN_INFO "setting full duplex, ");
 
-		iowrite32(ioread32(ioaddr + MAC_CTRL) | IPG_MC_DUPLEX_SELECT_FD, ioaddr + MAC_CTRL);
+		MacCtrlValue |= IPG_MC_DUPLEX_SELECT_FD;
 
 		if (txflowcontrol == 1) {
 			printk("TX flow control");
-			iowrite32(ioread32(ioaddr + MAC_CTRL) | IPG_MC_TX_FLOW_CONTROL_ENABLE, ioaddr + MAC_CTRL);
+			MacCtrlValue |= IPG_MC_TX_FLOW_CONTROL_ENABLE;
 		} else {
 			printk("no TX flow control");
-			iowrite32(ioread32(ioaddr + MAC_CTRL) & ~IPG_MC_TX_FLOW_CONTROL_ENABLE, ioaddr + MAC_CTRL);
+			MacCtrlValue &= ~IPG_MC_TX_FLOW_CONTROL_ENABLE;
 		}
 
 		if (rxflowcontrol == 1) {
 			printk(", RX flow control.");
-			iowrite32(ioread32(ioaddr+MAC_CTRL) | IPG_MC_RX_FLOW_CONTROL_ENABLE, ioaddr + MAC_CTRL);
+			MacCtrlValue |= IPG_MC_RX_FLOW_CONTROL_ENABLE;
 		} else {
 			printk(", no RX flow control.");
-			iowrite32(ioread32(ioaddr+MAC_CTRL) & ~IPG_MC_RX_FLOW_CONTROL_ENABLE, ioaddr + MAC_CTRL);
+			MacCtrlValue = MacCtrlValue & ~IPG_MC_RX_FLOW_CONTROL_ENABLE;
 		}
 
 		printk("\n");
@@ -570,8 +572,9 @@ static int ipg_config_autoneg(struct net
 		/* Configure IPG for half duplex operation. */
 	        printk(KERN_INFO "setting half duplex, no TX flow control, no RX flow control.\n");
 
-		iowrite32(ioread32(ioaddr+MAC_CTRL) & ~IPG_MC_DUPLEX_SELECT_FD & ~IPG_MC_TX_FLOW_CONTROL_ENABLE & ~IPG_MC_RX_FLOW_CONTROL_ENABLE, ioaddr + MAC_CTRL);
+		MacCtrlValue &= ~IPG_MC_DUPLEX_SELECT_FD & ~IPG_MC_TX_FLOW_CONTROL_ENABLE & ~IPG_MC_RX_FLOW_CONTROL_ENABLE;
 	}
+	iowrite32(MacCtrlValue , ioaddr+MAC_CTRL);
 	return 0;
 }
 
-- 
1.3.GIT




-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/