Le 15.08.2006 12:10, Rafael J. Wysocki a écrit :
> On Tuesday 15 August 2006 01:01, Laurent Riffard wrote:
>> Le 14.08.2006 23:25, Rafael J. Wysocki a écrit :
>>> On Monday 14 August 2006 22:06, Laurent Riffard wrote:
>>>> Le 14.08.2006 19:47, Laurent Riffard a écrit :
>>>>> Le 14.08.2006 18:50, Andrew Morton a écrit :
>>>>>> On Mon, 14 Aug 2006 16:38:47 +0200
>>>>>> Laurent Riffard <[email protected]> wrote:
>>>>>>
>>>>>>> Le 13.08.2006 10:24, Andrew Morton a __crit :
>>>>>>>> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.18-rc4/2.6.18-rc4-mm1/
>>>>>>> Hello,
>>>>>>>
>>>>>>> This morning, while trying to suspend to disk, my box started to loop
>>>>>>> displaying the following message:
>>>>>>> eth0: trigger_send() called with the transmitter busy.
>>>>>>>
>>>>>>> Here is the scenario. I booted 2.6.18-rc4-mm1 with this command line:
>>>>>>> root=/dev/vglinux1/lvroot video=vesafb:ywrap,mtrr splash=silent resume=/dev/hdb7 [email protected]/,@192.168.0.1/00:0E:9B:91:ED:72 init 1
>>>>>>>
>>>>>>> Then I issued:
>>>>>>> # echo 6 > /proc/sys/kernel/printk
>>>>>>> # echo disk > /sys/power/state
>>>>>> ne2k isn't <ahem> the most actively-maintained driver.
>>>>>>
>>>>>> But most (I think all) net drivers have problems during suspend when
>>>>>> netconsole is active. Does disabling netconsole help?
>>>>> Yes it does.
>>>>>
>>>>>> Did this operation work OK in earlier kernels, with netconsole enabled?
>>>>> It's the first time I see such a message. I can't speak for 2.6.18-rc3-mm2
>>>>> because it could not suspend at all (did hang right after
>>>>> "echo disk > /sys/power/state"), but it worked in earlier kernels.
>>>>>
>>>>> I'll try with plain 2.6.18-rc4.
>>>> Same problem with 2.6.18-rc4.
>>> I think something like this will help (untested):
>> Well, sort of: it sometimes works, which is better than not. I tried
>> about 10 times and it sometimes hangs after 'shrinking memory' or whilst
>> writing to the swap device.
>
> Hm, suspicious ...
>
> The swap partition is not on an LVM, is it?
>
>> The message "eth0: trigger_send() called with the transmitter busy" didn't
>> appear anymore.
>
> This is the one the patch was meant to get rid of.
>
>> Note that I always have had a warning sowhere in acpi_pci_link_set during suspend:
>> BUG: sleeping function called from invalid context at include/asm/semaphore.h:99
> Bad. If that's 100% reproducible, could you please try to nail it down?
I wasn't clear: I always had this "BUG: sleeping function called ...." since one year
or more. It never prevents from suspending. Do you want me to track down what cause
this message? Here is a more complete trace:
Stopping tasks: ================|
Shrinking memory... ^H-^H\^Hdone (10908 pages freed)
Suspending device sound
Suspending device agpgart
Suspending device rtc
Suspending device 00308d0120e085ca
Suspending device usbdev1.2
Suspending device usbdev1.2_ep81
Suspending device 1-2:1.0
Suspending device usbdev1.2_ep00
Suspending device 1-2
Suspending device fw-host0
Suspending device usbdev2.1
Suspending device usbdev2.1_ep81
Suspending device usbdev1.1
Suspending device usbdev1.1_ep81
Suspending device 2-0:1.0
Suspending device usbdev2.1_ep00
Suspending device usb2
Suspending device 1-0:1.0
Suspending device usbdev1.1_ep00
Suspending device usb1
Suspending device device-mapper
Suspending device 1.1
Suspending device 1.0
Suspending device ide1
Suspending device 0.1
Suspending device 0.0
Suspending device ide0
Suspending device psaux
Suspending device serio1
Suspending device serio0
Suspending device i8042
Suspending device isa
Suspending device vcsa
Suspending device vcs
Suspending device vc
Suspending device vesafb.0
Suspending device snapshot
Suspending device misc
Suspending device pcspkr
Suspending device 0000:01:00.0
Suspending device 0000:00:0d.0
Suspending device 0000:00:0b.0
ACPI: PCI interrupt for device 0000:00:0b.0 disabled
Suspending device 0000:00:09.0
Suspending device 0000:00:04.4
Suspending device 0000:00:04.3
ACPI: PCI interrupt for device 0000:00:04.3 disabled
Suspending device 0000:00:04.2
ACPI: PCI interrupt for device 0000:00:04.2 disabled
Suspending device 0000:00:04.1
Suspending device 0000:00:04.0
Suspending device 0000:00:01.0
Suspending device 0000:00:00.0
pci_set_power_state(): 0000:00:00.0: state=3, current state=5
Suspending device pci0000:00
Suspending device acpi
Suspending device vtcon0
Suspending device vtconsole
Suspending device virtual
Suspending device platform
swsusp: Need to copy 60817 pages
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
BUG: sleeping function called from invalid context at include/asm/semaphore.h:99
in_atomic():0, irqs_disabled():1
[<c0103894>] show_trace_log_lvl+0x12/0x25
[<c0103975>] show_trace+0xd/0x10
[<c01040aa>] dump_stack+0x19/0x1b
[<c0112ef9>] __might_sleep+0x8d/0x95
[<c01daf53>] acpi_os_wait_semaphore+0x93/0x158
[<c01ffb9d>] acpi_ut_acquire_mutex+0x69/0xd4
[<c01f3231>] acpi_ns_get_node+0x8e/0x112
[<c01f259a>] acpi_ns_evaluate+0x62/0x258
[<c01f8aa1>] acpi_rs_set_srs_method_data+0xf1/0x125
[<c01f8341>] acpi_set_current_resources+0x8b/0xb0
[<c0204ca5>] acpi_pci_link_set+0x10e/0x1e0
[<c0204dc2>] irqrouter_resume+0x4b/0x62
[<c021d04a>] __sysdev_resume+0x14/0x57
[<c021d1c0>] sysdev_resume+0x19/0x4b
[<c0221bf9>] device_power_up+0x8/0xf
[<c0134271>] swsusp_suspend+0x51/0x78
[<c013466a>] pm_suspend_disk+0x51/0xe2
[<c01337d0>] enter_state+0x52/0x164
[<c0133968>] state_store+0x86/0x9c
[<c01831b8>] subsys_attr_store+0x20/0x25
[<c01832c8>] sysfs_write_file+0xaa/0xcf
[<c015472c>] vfs_write+0x8c/0x138
[<c0154c44>] sys_write+0x3b/0x60
[<c0102c2d>] sysenter_past_esp+0x56/0x8d
=======================
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:04.2[D] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
PCI: VIA IRQ fixup for 0000:00:04.2, from 12 to 5
usb usb1: root hub lost power or was reset
ACPI: PCI Interrupt 0000:00:04.3[D] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
PCI: VIA IRQ fixup for 0000:00:04.3, from 12 to 5
usb usb2: root hub lost power or was reset
PM: Writing back config space on device 0000:00:09.0 at offset f (was 180c010c, writing 180c0105)
PM: Writing back config space on device 0000:00:0b.0 at offset 1 (was 2000000, writing 2000003)
ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
PM: Writing back config space on device 0000:00:0d.0 at offset f (was 800c010c, writing 800c0105)
PM: Writing back config space on device 0000:00:0d.0 at offset 1 (was 4100005, writing 34100000)
Restarting tasks... done
usb 1-2: USB disconnect, address 2
> Please revert the "suspend_console" patch before doing this, because it turns
> down all consoles altogether during the suspend. You can also use the patch
> and instructions at
>
> http://marc.theaimsgroup.com/?l=linux-acpi&m=115506915023030&q=raw
>
> to debug device drivers' suspend/resume without really suspending.
>
>> I'm under the impression your patch is a workaround for my network problem.
>> Or must really netconsole be stopped during device_suspend ?
>
> Yes, it must. For now, the consoles are suspend-unfriendly, so to speak. ;-)
>
I think I found something related to netconsole and your patch
"suspend_console/resume_console". I was booting to runlevel 1 and I was using
this script to suspend:
<=== script begin ===>
#!/bin/sh
# don't want to {fsck *and* reboot} if something goes wrong
mount -oremount,ro /
# enable write caching on HD
hdparm -W1 /dev/hd[ab]
echo 6 > /proc/sys/kernel/printk
sleep 2
echo disk > /sys/power/state
<=== script end ===>
The important point is the "sleep 2" line. If it is present, I can suspend the box.
Remove the "sleep command" and it will hang after displaying:
Stopping tasks: =====================|
Shrinking memory... done (0 pages freed)
If netconsole is disabled (ie not called from command line), I do not need this
"sleep", suspend always works.
--
laurent
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
