Re: debug prism wlan

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]


Oh, sorry I have forgotten to tell:

drunken init # lspci |grep Prism
00:08.0 Network controller: Intersil Corporation ISL3890 [Prism GT/Prism 
Duette]/ISL3886 [Prism Javelin/Prism Xbow] (rev 01)

So I'm using the prism54 driver (CONFIG_PRISM54). My version of wireless-tools 
is 29_pre10 and the version of the used firmware is

BTW: I tried
# modprobe prism54 pc_debug=1


# modprobe prism54 pc_debug=9999999

But it doesn't increased the verbose level.

The firmware upload was successfull (according to dmesg).

Am Samstag, 12. August 2006 20:15 schrieben Sie:
> On Saturday 12 August 2006 22:40, Daniel wrote:
> > Hi,
> > my wlan gives up working somewhere between upgrading to gcc-4.1, changing
> > some kernel options and upgrading to linux-2.8.16-r4.
> Hi Daniel,
> Which driver does this card use? There's a couple Prism 1/2/2.5 802.11b
> drivers and a Prism54 driver for 802.11g cards. Any ideas?
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at
Please read the FAQ at

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux