One of my notebooks (Dell Latitude X1) has a 1.1GHz Pentium-M ULV processor.
This chip can change CPU speeds from 600 -> 800 -> 1100 Mhz.
I use speedstep-centrino with it, and after boot all is usually okay.
But after a few hours of operation, it stops shifting to the highest frequency
even under continuous 100% load (or not). Eventually it gets stuck at 600Mhz
and stays there until I reboot.
Sometimes rebooting doesn't even restore it.
/sys/devices/system/cpu/cpu0/cpufreq is all very normal looking,
showing the available frequencies and other info. All of the attribs
there look fine, except for "scaling_max_freq", which is what seems
to gradually get set smaller. For instance, right now it is set to 800000,
and it won't let me change it (echo 11000000 > scaling_max_freq has no effect.
WHY? And how can I fix it?
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
