Re: Serial driver 8250 hangs the kernel with the VIA Nehemiah...

[Alan Cox <alan@lxorguk.ukuu.org.uk>]

Ar Gwe, 2006-08-11 am 09:52 +0100, ysgrifennodd Chris Pringle:
> on it. However, when the port is receiving a lot of data, it has the
> tendency to either get corrupted data, or to crash the kernel.

What do the crash traces look like

> The "inb" as it is will sometimes return bad data - I'm guessing this
> is due to ISA bus instability... Anyway I changed it to "inb_p" which
> cured the corruption problem, but has introduced another issue - it
> hangs the kernel.

Maybe you need to have a chat with your hardware guys. Certainly if
inb_p makes a difference you've got hardware not software side problems.

> Interestingly, it only hangs on systems with a VIA Nehemiah CPU, the
> Intel Celerons seem to work fine. Could this be a problem with writing
> to that dreaded port 0x080 within inb_p?

Unlikely as it would affect both. More likely would be that the ISA bus
clock is generated off the PCI bus clock and you have one of the
multipliers wrong or too high for the board.

> it only occur on the VIA chip and not the Celeron? I don't think the
> problem is there when the low latency patches are not applied - so I'm
> thinking it's probably a timing problem of some sort.

That bit is interesting. Something really off the wall to try - disable
interrupts around the inb_p(), especially if you are using pre-emption
and let me know what happens.

Alan

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/