r
From: "Jan Beulich" <[email protected]>
Add unwind annotations to arch/x86_64/lib/*.S, and also use the macros
provided by linux/linkage.h where-ever possible.
Some of the alternative instructions handling needed to be adjusted so
that the replacement code would also have valid unwind information.
Signed-off-by: Jan Beulich <[email protected]>
Signed-off-by: Andi Kleen <[email protected]>
---
arch/x86_64/lib/clear_page.S | 47 +++++++++++++++----------
arch/x86_64/lib/copy_page.S | 53 +++++++++++++++++++---------
arch/x86_64/lib/copy_user.S | 39 +++++++++++++++------
arch/x86_64/lib/csum-copy.S | 26 +++++++++++---
arch/x86_64/lib/getuser.S | 32 ++++++++++-------
arch/x86_64/lib/iomap_copy.S | 10 +++--
arch/x86_64/lib/memcpy.S | 69 +++++++++++++++++++++----------------
arch/x86_64/lib/memset.S | 79 +++++++++++++++++++++++--------------------
arch/x86_64/lib/putuser.S | 32 ++++++++++-------
9 files changed, 244 insertions(+), 143 deletions(-)
Index: linux/arch/x86_64/lib/clear_page.S
===================================================================
--- linux.orig/arch/x86_64/lib/clear_page.S
+++ linux/arch/x86_64/lib/clear_page.S
@@ -1,10 +1,22 @@
+#include <linux/linkage.h>
+#include <asm/dwarf2.h>
+
/*
* Zero a page.
* rdi page
*/
- .globl clear_page
- .p2align 4
-clear_page:
+ ALIGN
+clear_page_c:
+ CFI_STARTPROC
+ movl $4096/8,%ecx
+ xorl %eax,%eax
+ rep stosq
+ ret
+ CFI_ENDPROC
+ENDPROC(clear_page)
+
+ENTRY(clear_page)
+ CFI_STARTPROC
xorl %eax,%eax
movl $4096/64,%ecx
.p2align 4
@@ -23,28 +35,25 @@ clear_page:
jnz .Lloop
nop
ret
-clear_page_end:
+ CFI_ENDPROC
+.Lclear_page_end:
+ENDPROC(clear_page)
/* Some CPUs run faster using the string instructions.
It is also a lot simpler. Use this when possible */
#include <asm/cpufeature.h>
+ .section .altinstr_replacement,"ax"
+1: .byte 0xeb /* jmp <disp8> */
+ .byte (clear_page_c - clear_page) - (2f - 1b) /* offset */
+2:
+ .previous
.section .altinstructions,"a"
.align 8
- .quad clear_page
- .quad clear_page_c
- .byte X86_FEATURE_REP_GOOD
- .byte clear_page_end-clear_page
- .byte clear_page_c_end-clear_page_c
- .previous
-
- .section .altinstr_replacement,"ax"
-clear_page_c:
- movl $4096/8,%ecx
- xorl %eax,%eax
- rep
- stosq
- ret
-clear_page_c_end:
+ .quad clear_page
+ .quad 1b
+ .byte X86_FEATURE_REP_GOOD
+ .byte .Lclear_page_end - clear_page
+ .byte 2b - 1b
.previous
Index: linux/arch/x86_64/lib/copy_page.S
===================================================================
--- linux.orig/arch/x86_64/lib/copy_page.S
+++ linux/arch/x86_64/lib/copy_page.S
@@ -1,17 +1,33 @@
/* Written 2003 by Andi Kleen, based on a kernel by Evandro Menezes */
+#include <linux/config.h>
+#include <linux/linkage.h>
+#include <asm/dwarf2.h>
+
+ ALIGN
+copy_page_c:
+ CFI_STARTPROC
+ movl $4096/8,%ecx
+ rep movsq
+ ret
+ CFI_ENDPROC
+ENDPROC(copy_page_c)
+
/* Don't use streaming store because it's better when the target
ends up in cache. */
/* Could vary the prefetch distance based on SMP/UP */
- .globl copy_page
- .p2align 4
-copy_page:
+ENTRY(copy_page)
+ CFI_STARTPROC
subq $3*8,%rsp
+ CFI_ADJUST_CFA_OFFSET 3*8
movq %rbx,(%rsp)
+ CFI_REL_OFFSET rbx, 0
movq %r12,1*8(%rsp)
+ CFI_REL_OFFSET r12, 1*8
movq %r13,2*8(%rsp)
+ CFI_REL_OFFSET r13, 2*8
movl $(4096/64)-5,%ecx
.p2align 4
@@ -72,30 +88,33 @@ copy_page:
jnz .Loop2
movq (%rsp),%rbx
+ CFI_RESTORE rbx
movq 1*8(%rsp),%r12
+ CFI_RESTORE r12
movq 2*8(%rsp),%r13
+ CFI_RESTORE r13
addq $3*8,%rsp
+ CFI_ADJUST_CFA_OFFSET -3*8
ret
+.Lcopy_page_end:
+ CFI_ENDPROC
+ENDPROC(copy_page)
/* Some CPUs run faster using the string copy instructions.
It is also a lot simpler. Use this when possible */
#include <asm/cpufeature.h>
+ .section .altinstr_replacement,"ax"
+1: .byte 0xeb /* jmp <disp8> */
+ .byte (copy_page_c - copy_page) - (2f - 1b) /* offset */
+2:
+ .previous
.section .altinstructions,"a"
.align 8
- .quad copy_page
- .quad copy_page_c
- .byte X86_FEATURE_REP_GOOD
- .byte copy_page_c_end-copy_page_c
- .byte copy_page_c_end-copy_page_c
- .previous
-
- .section .altinstr_replacement,"ax"
-copy_page_c:
- movl $4096/8,%ecx
- rep
- movsq
- ret
-copy_page_c_end:
+ .quad copy_page
+ .quad 1b
+ .byte X86_FEATURE_REP_GOOD
+ .byte .Lcopy_page_end - copy_page
+ .byte 2b - 1b
.previous
Index: linux/arch/x86_64/lib/copy_user.S
===================================================================
--- linux.orig/arch/x86_64/lib/copy_user.S
+++ linux/arch/x86_64/lib/copy_user.S
@@ -4,6 +4,9 @@
* Functions to copy from and to user space.
*/
+#include <linux/linkage.h>
+#include <asm/dwarf2.h>
+
#define FIX_ALIGNMENT 1
#include <asm/current.h>
@@ -12,9 +15,8 @@
#include <asm/cpufeature.h>
/* Standard copy_to_user with segment limit checking */
- .globl copy_to_user
- .p2align 4
-copy_to_user:
+ENTRY(copy_to_user)
+ CFI_STARTPROC
GET_THREAD_INFO(%rax)
movq %rdi,%rcx
addq %rdx,%rcx
@@ -25,9 +27,11 @@ copy_to_user:
.byte 0xe9 /* 32bit jump */
.long .Lcug-1f
1:
+ CFI_ENDPROC
+ENDPROC(copy_to_user)
.section .altinstr_replacement,"ax"
-3: .byte 0xe9 /* replacement jmp with 8 bit immediate */
+3: .byte 0xe9 /* replacement jmp with 32 bit immediate */
.long copy_user_generic_c-1b /* offset */
.previous
.section .altinstructions,"a"
@@ -40,9 +44,8 @@ copy_to_user:
.previous
/* Standard copy_from_user with segment limit checking */
- .globl copy_from_user
- .p2align 4
-copy_from_user:
+ENTRY(copy_from_user)
+ CFI_STARTPROC
GET_THREAD_INFO(%rax)
movq %rsi,%rcx
addq %rdx,%rcx
@@ -50,10 +53,13 @@ copy_from_user:
cmpq threadinfo_addr_limit(%rax),%rcx
jae bad_from_user
/* FALL THROUGH to copy_user_generic */
+ CFI_ENDPROC
+ENDPROC(copy_from_user)
.section .fixup,"ax"
/* must zero dest */
bad_from_user:
+ CFI_STARTPROC
movl %edx,%ecx
xorl %eax,%eax
rep
@@ -61,6 +67,8 @@ bad_from_user:
bad_to_user:
movl %edx,%eax
ret
+ CFI_ENDPROC
+END(bad_from_user)
.previous
@@ -75,9 +83,8 @@ bad_to_user:
* Output:
* eax uncopied bytes or 0 if successful.
*/
- .globl copy_user_generic
- .p2align 4
-copy_user_generic:
+ENTRY(copy_user_generic)
+ CFI_STARTPROC
.byte 0x66,0x66,0x90 /* 5 byte nop for replacement jump */
.byte 0x66,0x90
1:
@@ -95,6 +102,8 @@ copy_user_generic:
.previous
.Lcug:
pushq %rbx
+ CFI_ADJUST_CFA_OFFSET 8
+ CFI_REL_OFFSET rbx, 0
xorl %eax,%eax /*zero for the exception handler */
#ifdef FIX_ALIGNMENT
@@ -168,9 +177,13 @@ copy_user_generic:
decl %ecx
jnz .Lloop_1
+ CFI_REMEMBER_STATE
.Lende:
popq %rbx
+ CFI_ADJUST_CFA_OFFSET -8
+ CFI_RESTORE rbx
ret
+ CFI_RESTORE_STATE
#ifdef FIX_ALIGNMENT
/* align destination */
@@ -261,6 +274,9 @@ copy_user_generic:
.Le_zero:
movq %rdx,%rax
jmp .Lende
+ CFI_ENDPROC
+ENDPROC(copy_user_generic)
+
/* Some CPUs run faster using the string copy instructions.
This is also a lot simpler. Use them when possible.
@@ -282,6 +298,7 @@ copy_user_generic:
* this please consider this.
*/
copy_user_generic_c:
+ CFI_STARTPROC
movl %edx,%ecx
shrl $3,%ecx
andl $7,%edx
@@ -294,6 +311,8 @@ copy_user_generic_c:
ret
3: lea (%rdx,%rcx,8),%rax
ret
+ CFI_ENDPROC
+END(copy_user_generic_c)
.section __ex_table,"a"
.quad 1b,3b
Index: linux/arch/x86_64/lib/csum-copy.S
===================================================================
--- linux.orig/arch/x86_64/lib/csum-copy.S
+++ linux/arch/x86_64/lib/csum-copy.S
@@ -5,8 +5,9 @@
* License. See the file COPYING in the main directory of this archive
* for more details. No warranty for anything given at all.
*/
- #include <linux/linkage.h>
- #include <asm/errno.h>
+#include <linux/linkage.h>
+#include <asm/dwarf2.h>
+#include <asm/errno.h>
/*
* Checksum copy with exception handling.
@@ -53,19 +54,24 @@
.endm
- .globl csum_partial_copy_generic
- .p2align 4
-csum_partial_copy_generic:
+ENTRY(csum_partial_copy_generic)
+ CFI_STARTPROC
cmpl $3*64,%edx
jle .Lignore
.Lignore:
subq $7*8,%rsp
+ CFI_ADJUST_CFA_OFFSET 7*8
movq %rbx,2*8(%rsp)
+ CFI_REL_OFFSET rbx, 2*8
movq %r12,3*8(%rsp)
+ CFI_REL_OFFSET r12, 3*8
movq %r14,4*8(%rsp)
+ CFI_REL_OFFSET r14, 4*8
movq %r13,5*8(%rsp)
+ CFI_REL_OFFSET r13, 5*8
movq %rbp,6*8(%rsp)
+ CFI_REL_OFFSET rbp, 6*8
movq %r8,(%rsp)
movq %r9,1*8(%rsp)
@@ -208,14 +214,22 @@ csum_partial_copy_generic:
addl %ebx,%eax
adcl %r9d,%eax /* carry */
+ CFI_REMEMBER_STATE
.Lende:
movq 2*8(%rsp),%rbx
+ CFI_RESTORE rbx
movq 3*8(%rsp),%r12
+ CFI_RESTORE r12
movq 4*8(%rsp),%r14
+ CFI_RESTORE r14
movq 5*8(%rsp),%r13
+ CFI_RESTORE r13
movq 6*8(%rsp),%rbp
+ CFI_RESTORE rbp
addq $7*8,%rsp
+ CFI_ADJUST_CFA_OFFSET -7*8
ret
+ CFI_RESTORE_STATE
/* Exception handlers. Very simple, zeroing is done in the wrappers */
.Lbad_source:
@@ -231,3 +245,5 @@ csum_partial_copy_generic:
jz .Lende
movl $-EFAULT,(%rax)
jmp .Lende
+ CFI_ENDPROC
+ENDPROC(csum_partial_copy_generic)
Index: linux/arch/x86_64/lib/getuser.S
===================================================================
--- linux.orig/arch/x86_64/lib/getuser.S
+++ linux/arch/x86_64/lib/getuser.S
@@ -27,25 +27,26 @@
*/
#include <linux/linkage.h>
+#include <asm/dwarf2.h>
#include <asm/page.h>
#include <asm/errno.h>
#include <asm/asm-offsets.h>
#include <asm/thread_info.h>
.text
- .p2align 4
-.globl __get_user_1
-__get_user_1:
+ENTRY(__get_user_1)
+ CFI_STARTPROC
GET_THREAD_INFO(%r8)
cmpq threadinfo_addr_limit(%r8),%rcx
jae bad_get_user
1: movzb (%rcx),%edx
xorl %eax,%eax
ret
+ CFI_ENDPROC
+ENDPROC(__get_user_1)
- .p2align 4
-.globl __get_user_2
-__get_user_2:
+ENTRY(__get_user_2)
+ CFI_STARTPROC
GET_THREAD_INFO(%r8)
addq $1,%rcx
jc 20f
@@ -57,10 +58,11 @@ __get_user_2:
ret
20: decq %rcx
jmp bad_get_user
+ CFI_ENDPROC
+ENDPROC(__get_user_2)
- .p2align 4
-.globl __get_user_4
-__get_user_4:
+ENTRY(__get_user_4)
+ CFI_STARTPROC
GET_THREAD_INFO(%r8)
addq $3,%rcx
jc 30f
@@ -72,10 +74,11 @@ __get_user_4:
ret
30: subq $3,%rcx
jmp bad_get_user
+ CFI_ENDPROC
+ENDPROC(__get_user_4)
- .p2align 4
-.globl __get_user_8
-__get_user_8:
+ENTRY(__get_user_8)
+ CFI_STARTPROC
GET_THREAD_INFO(%r8)
addq $7,%rcx
jc 40f
@@ -87,11 +90,16 @@ __get_user_8:
ret
40: subq $7,%rcx
jmp bad_get_user
+ CFI_ENDPROC
+ENDPROC(__get_user_8)
bad_get_user:
+ CFI_STARTPROC
xorl %edx,%edx
movq $(-EFAULT),%rax
ret
+ CFI_ENDPROC
+END(bad_get_user)
.section __ex_table,"a"
.quad 1b,bad_get_user
Index: linux/arch/x86_64/lib/iomap_copy.S
===================================================================
--- linux.orig/arch/x86_64/lib/iomap_copy.S
+++ linux/arch/x86_64/lib/iomap_copy.S
@@ -15,12 +15,16 @@
* Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA.
*/
+#include <linux/linkage.h>
+#include <asm/dwarf2.h>
+
/*
* override generic version in lib/iomap_copy.c
*/
- .globl __iowrite32_copy
- .p2align 4
-__iowrite32_copy:
+ENTRY(__iowrite32_copy)
+ CFI_STARTPROC
movl %edx,%ecx
rep movsd
ret
+ CFI_ENDPROC
+ENDPROC(__iowrite32_copy)
Index: linux/arch/x86_64/lib/memcpy.S
===================================================================
--- linux.orig/arch/x86_64/lib/memcpy.S
+++ linux/arch/x86_64/lib/memcpy.S
@@ -1,6 +1,10 @@
/* Copyright 2002 Andi Kleen */
- #include <asm/cpufeature.h>
+#include <linux/config.h>
+#include <linux/linkage.h>
+#include <asm/dwarf2.h>
+#include <asm/cpufeature.h>
+
/*
* memcpy - Copy a memory block.
*
@@ -13,12 +17,26 @@
* rax original destination
*/
- .globl __memcpy
- .globl memcpy
- .p2align 4
-__memcpy:
-memcpy:
+ ALIGN
+memcpy_c:
+ CFI_STARTPROC
+ movq %rdi,%rax
+ movl %edx,%ecx
+ shrl $3,%ecx
+ andl $7,%edx
+ rep movsq
+ movl %edx,%ecx
+ rep movsb
+ ret
+ CFI_ENDPROC
+ENDPROC(memcpy_c)
+
+ENTRY(__memcpy)
+ENTRY(memcpy)
+ CFI_STARTPROC
pushq %rbx
+ CFI_ADJUST_CFA_OFFSET 8
+ CFI_REL_OFFSET rbx, 0
movq %rdi,%rax
movl %edx,%ecx
@@ -86,36 +104,27 @@ memcpy:
.Lende:
popq %rbx
+ CFI_ADJUST_CFA_OFFSET -8
+ CFI_RESTORE rbx
ret
.Lfinal:
+ CFI_ENDPROC
+ENDPROC(memcpy)
+ENDPROC(__memcpy)
/* Some CPUs run faster using the string copy instructions.
It is also a lot simpler. Use this when possible */
+ .section .altinstr_replacement,"ax"
+1: .byte 0xeb /* jmp <disp8> */
+ .byte (memcpy_c - memcpy) - (2f - 1b) /* offset */
+2:
+ .previous
.section .altinstructions,"a"
.align 8
- .quad memcpy
- .quad memcpy_c
- .byte X86_FEATURE_REP_GOOD
- .byte .Lfinal-memcpy
- .byte memcpy_c_end-memcpy_c
- .previous
-
- .section .altinstr_replacement,"ax"
- /* rdi destination
- * rsi source
- * rdx count
- */
-memcpy_c:
- movq %rdi,%rax
- movl %edx,%ecx
- shrl $3,%ecx
- andl $7,%edx
- rep
- movsq
- movl %edx,%ecx
- rep
- movsb
- ret
-memcpy_c_end:
+ .quad memcpy
+ .quad 1b
+ .byte X86_FEATURE_REP_GOOD
+ .byte .Lfinal - memcpy
+ .byte 2b - 1b
.previous
Index: linux/arch/x86_64/lib/memset.S
===================================================================
--- linux.orig/arch/x86_64/lib/memset.S
+++ linux/arch/x86_64/lib/memset.S
@@ -1,4 +1,9 @@
/* Copyright 2002 Andi Kleen, SuSE Labs */
+
+#include <linux/config.h>
+#include <linux/linkage.h>
+#include <asm/dwarf2.h>
+
/*
* ISO C memset - set a memory block to a byte value.
*
@@ -8,11 +13,29 @@
*
* rax original destination
*/
- .globl __memset
- .globl memset
- .p2align 4
-memset:
-__memset:
+ ALIGN
+memset_c:
+ CFI_STARTPROC
+ movq %rdi,%r9
+ movl %edx,%r8d
+ andl $7,%r8d
+ movl %edx,%ecx
+ shrl $3,%ecx
+ /* expand byte value */
+ movzbl %sil,%esi
+ movabs $0x0101010101010101,%rax
+ mulq %rsi /* with rax, clobbers rdx */
+ rep stosq
+ movl %r8d,%ecx
+ rep stosb
+ movq %r9,%rax
+ ret
+ CFI_ENDPROC
+ENDPROC(memset_c)
+
+ENTRY(memset)
+ENTRY(__memset)
+ CFI_STARTPROC
movq %rdi,%r10
movq %rdx,%r11
@@ -25,6 +48,7 @@ __memset:
movl %edi,%r9d
andl $7,%r9d
jnz .Lbad_alignment
+ CFI_REMEMBER_STATE
.Lafter_bad_alignment:
movl %r11d,%ecx
@@ -75,6 +99,7 @@ __memset:
movq %r10,%rax
ret
+ CFI_RESTORE_STATE
.Lbad_alignment:
cmpq $7,%r11
jbe .Lhandle_7
@@ -84,42 +109,26 @@ __memset:
addq %r8,%rdi
subq %r8,%r11
jmp .Lafter_bad_alignment
+.Lfinal:
+ CFI_ENDPROC
+ENDPROC(memset)
+ENDPROC(__memset)
/* Some CPUs run faster using the string instructions.
It is also a lot simpler. Use this when possible */
#include <asm/cpufeature.h>
+ .section .altinstr_replacement,"ax"
+1: .byte 0xeb /* jmp <disp8> */
+ .byte (memset_c - memset) - (2f - 1b) /* offset */
+2:
+ .previous
.section .altinstructions,"a"
.align 8
- .quad memset
- .quad memset_c
- .byte X86_FEATURE_REP_GOOD
- .byte memset_c_end-memset_c
- .byte memset_c_end-memset_c
- .previous
-
- .section .altinstr_replacement,"ax"
- /* rdi destination
- * rsi value
- * rdx count
- */
-memset_c:
- movq %rdi,%r9
- movl %edx,%r8d
- andl $7,%r8d
- movl %edx,%ecx
- shrl $3,%ecx
- /* expand byte value */
- movzbl %sil,%esi
- movabs $0x0101010101010101,%rax
- mulq %rsi /* with rax, clobbers rdx */
- rep
- stosq
- movl %r8d,%ecx
- rep
- stosb
- movq %r9,%rax
- ret
-memset_c_end:
+ .quad memset
+ .quad 1b
+ .byte X86_FEATURE_REP_GOOD
+ .byte .Lfinal - memset
+ .byte 2b - 1b
.previous
Index: linux/arch/x86_64/lib/putuser.S
===================================================================
--- linux.orig/arch/x86_64/lib/putuser.S
+++ linux/arch/x86_64/lib/putuser.S
@@ -25,25 +25,26 @@
*/
#include <linux/linkage.h>
+#include <asm/dwarf2.h>
#include <asm/page.h>
#include <asm/errno.h>
#include <asm/asm-offsets.h>
#include <asm/thread_info.h>
.text
- .p2align 4
-.globl __put_user_1
-__put_user_1:
+ENTRY(__put_user_1)
+ CFI_STARTPROC
GET_THREAD_INFO(%r8)
cmpq threadinfo_addr_limit(%r8),%rcx
jae bad_put_user
1: movb %dl,(%rcx)
xorl %eax,%eax
ret
+ CFI_ENDPROC
+ENDPROC(__put_user_1)
- .p2align 4
-.globl __put_user_2
-__put_user_2:
+ENTRY(__put_user_2)
+ CFI_STARTPROC
GET_THREAD_INFO(%r8)
addq $1,%rcx
jc 20f
@@ -55,10 +56,11 @@ __put_user_2:
ret
20: decq %rcx
jmp bad_put_user
+ CFI_ENDPROC
+ENDPROC(__put_user_2)
- .p2align 4
-.globl __put_user_4
-__put_user_4:
+ENTRY(__put_user_4)
+ CFI_STARTPROC
GET_THREAD_INFO(%r8)
addq $3,%rcx
jc 30f
@@ -70,10 +72,11 @@ __put_user_4:
ret
30: subq $3,%rcx
jmp bad_put_user
+ CFI_ENDPROC
+ENDPROC(__put_user_4)
- .p2align 4
-.globl __put_user_8
-__put_user_8:
+ENTRY(__put_user_8)
+ CFI_STARTPROC
GET_THREAD_INFO(%r8)
addq $7,%rcx
jc 40f
@@ -85,10 +88,15 @@ __put_user_8:
ret
40: subq $7,%rcx
jmp bad_put_user
+ CFI_ENDPROC
+ENDPROC(__put_user_8)
bad_put_user:
+ CFI_STARTPROC
movq $(-EFAULT),%rax
ret
+ CFI_ENDPROC
+END(bad_put_user)
.section __ex_table,"a"
.quad 1b,bad_put_user
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
