On Wed, 9 Aug 2006, Pavel Machek wrote:
> Hi!
>
> > > > A few months ago, I installed suspend2 on my laptop. It worked great for
> > > > a few days, when suddenly my laptop started to get very hot and the fan
> > > > costantly went off, and then I started getting these:
> > >
> > > I take it as "if I keep it for a week powered off, it will not do
> > > this".
> >
> > Not quite. It's more of, "if I suspend everynight instead of leaving it
> > running or shutting it down, it will do this" or "if I power off at night
> > or just leave it running, it will not do this".
>
> Okay, can you try to leave it up for a week or two (no suspends, no
> poweroffs) and see what happens?
I've had this laptop running for a couple of months without shutting down
and it doesn't have a problem. The only time that I do shut it down is
when I'm working on site (which I'm doing now). So I only shutdown the
laptop while traveling. When I came across suspend2 (and later swsusp), I
was excited that I didn't need to restart all my applications when leaving
the place of work and coming back. But After being on site for several
days, and using the suspend to disk, I get a hot CPU. But when I've been
on site while shutting down normally when I leave then I don't have a
problem.
>
> > > P4 has thermal protection, so you are actually safe.
> >
> > Yeah, but still, the keyboard gets pretty hot too, and I'm actually more
> > worried about damaging something that is close by than damaging the CPU
> > itself.
>
> If you damage something, machine was misdesigned in the first place.
agreed, but you never know ;) This laptop is currently my lifeline :)
>
> cat we get contents of /proc/acpi/thermal*/*/* ?
I'm running after a poweroff (left it running over night in the hotel, and
I'm still in the hotel).
$ grep . /proc/acpi/thermal_zone/THRM/*
/proc/acpi/thermal_zone/THRM/cooling_mode:<setting not supported>
/proc/acpi/thermal_zone/THRM/cooling_mode:cooling mode: passive
/proc/acpi/thermal_zone/THRM/polling_frequency:<polling disabled>
/proc/acpi/thermal_zone/THRM/state:state: ok
/proc/acpi/thermal_zone/THRM/temperature:temperature: 48 C
/proc/acpi/thermal_zone/THRM/trip_points:critical (S5): 88 C
/proc/acpi/thermal_zone/THRM/trip_points:passive: 81 C: tc1=4 tc2=3 tsp=100 devices=0xcf6c2338
Note thermal_zone/THRM was finished with bash tab completion so they are
the only things that match the above glob expr.
>
> > $ sudo modprobe ibm_acpi
> > $ ls /proc/acpi/ibm/
> > bay bluetooth driver led thermal
> > beep cmos hotkey light video
> >
> > No fan there
>
> Does ibm/thermal work?
$ cat /proc/acpi/ibm/thermal
temperatures: not supported
I guess not.
>
> Seems like fan is completely controlled by hardware. What may still
> help: either saving or avoiding saving reserved parts of memory. But
> this is all magic.
>
> How s2ram works would be useful info.
No idea.
It does look like something isn't setting up the ACPI power properly on
resume, and that the CPU is probably in a busy loop while the machine is
idle. Just a guess.
Thanks for the support,
-- Steve
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
