On Tue, Aug 08 2006, Jens Axboe wrote:
> On Tue, Aug 08 2006, Rafael J. Wysocki wrote:
> > On Tuesday 08 August 2006 12:43, Jens Axboe wrote:
> > > On Tue, Aug 08 2006, Jiri Slaby wrote:
> > > > Rafael J. Wysocki wrote:
> > > > >On Monday 07 August 2006 18:23, Jason Lunz wrote:
> > > > >>In gmane.linux.kernel, you wrote:
> > > > >>>>ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.18-rc3/2.6.18-rc3-mm2/
> > > > >>>I tried it and guess what :)... swsusp doesn't work :@.
> > > > >>>
> > > > >>>This time I was able to dump process states with sysrq-t:
> > > > >>>http://www.fi.muni.cz/~xslaby/sklad/ide2.gif
> > > > >>>
> > > > >>>My guess is ide2/2.0 dies (hpt370 driver), since last thing kernel
> > > > >>>prints is suspending device 2.0
> > > > >>Does it go away if you revert this?
> > > > >>ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.18-rc3/2.6.18-rc3-mm2/broken-out/ide-reprogram-disk-pio-timings-on-resume.patch
> > > > >>
> > > > >>That should only affect resume, not suspend, but it does mess around
> > > > >>with ide power management. Is this maybe happening on the *second*
> > > > >>suspend?
> > > > >>
> > > > >>>-hdc: ATAPI 63X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
> > > > >>>+hdc: ATAPI CD-ROM drive, 0kB Cache, UDMA(33)
> > > > >>This looks suspicious. -mm does have several ide-fix-hpt3xx patches.
> > > > >
> > > > >I found that git-block.patch broke the suspend for me. Still have no idea
> > > > >what's up with it.
> > > >
> > > > I suspect elevator changes. The wait_for_completion is not woken in
> > > > ide-io by ll_rw_blk. But I don't understand block layer too much.
> > >
> > > The ide changes are far more likely, it's probably missing a completion.
> >
> > Actually I think the commit f74bf2e6b415588e562fdcfdd454d587eb33cd46
> > (Remove ->waiting member from struct request) is wrong, because
> > generic_ide_suspend() uses the end_of_io member of rq to pass the PM data
> > to ide_do_drive_cmd() where the pointer gets overwritten by &wait (must_wait
> > is "true", because action == ide_wait). Previously &wait was stored in
> > rq->waiting and it didn't overwrite the PM data.
>
> Indeed, that looks broken now. That must be what is screwing it up. With
> the former patch applied, did cdrom detection still look funny to you?
>
> I'll concoct a fix for that breakage.
Something like this.
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index db647a9..38479a2 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -141,7 +141,7 @@ enum {
static void ide_complete_power_step(ide_drive_t *drive, struct request *rq, u8 stat, u8 error)
{
- struct request_pm_state *pm = rq->end_io_data;
+ struct request_pm_state *pm = rq->data;
if (drive->media != ide_disk)
return;
@@ -164,7 +164,7 @@ static void ide_complete_power_step(ide_
static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *rq)
{
- struct request_pm_state *pm = rq->end_io_data;
+ struct request_pm_state *pm = rq->data;
ide_task_t *args = rq->special;
memset(args, 0, sizeof(*args));
@@ -421,7 +421,7 @@ void ide_end_drive_cmd (ide_drive_t *dri
}
}
} else if (blk_pm_request(rq)) {
- struct request_pm_state *pm = rq->end_io_data;
+ struct request_pm_state *pm = rq->data;
#ifdef DEBUG_PM
printk("%s: complete_power_step(step: %d, stat: %x, err: %x)\n",
drive->name, rq->pm->pm_step, stat, err);
@@ -933,7 +933,7 @@ #endif
static void ide_check_pm_state(ide_drive_t *drive, struct request *rq)
{
- struct request_pm_state *pm = rq->end_io_data;
+ struct request_pm_state *pm = rq->data;
if (blk_pm_suspend_request(rq) &&
pm->pm_step == ide_pm_state_start_suspend)
@@ -1018,7 +1018,7 @@ #endif
rq->cmd_type == REQ_TYPE_ATA_TASKFILE)
return execute_drive_cmd(drive, rq);
else if (blk_pm_request(rq)) {
- struct request_pm_state *pm = rq->end_io_data;
+ struct request_pm_state *pm = rq->data;
#ifdef DEBUG_PM
printk("%s: start_power_step(step: %d)\n",
drive->name, rq->pm->pm_step);
diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c
index d7b4499..0fd1e1c 100644
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -1219,7 +1219,7 @@ static int generic_ide_suspend(struct de
memset(&args, 0, sizeof(args));
rq.cmd_type = REQ_TYPE_PM_SUSPEND;
rq.special = &args;
- rq.end_io_data = &rqpm;
+ rq.data = &rqpm;
rqpm.pm_step = ide_pm_state_start_suspend;
rqpm.pm_state = state.event;
@@ -1238,7 +1238,7 @@ static int generic_ide_resume(struct dev
memset(&args, 0, sizeof(args));
rq.cmd_type = REQ_TYPE_PM_RESUME;
rq.special = &args;
- rq.end_io_data = &rqpm;
+ rq.data = &rqpm;
rqpm.pm_step = ide_pm_state_start_resume;
rqpm.pm_state = PM_EVENT_ON;
--
Jens Axboe
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]