[PATCH] UTF-8 input: composing non-latin1 characters, and copy-paste

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This has been already submitted as http://lkml.org/lkml/2006/5/9/40, but without useful response.

Resubmitting so that it gets considered at least for -mm.

The situation with UTF-8 input in Linux kernels is as follows:

Status as of unpatched 2.6.16.x:

* One can put the keyboard driver into Unicode mode, load a Unicode keymap, and get single keystrokes generate valid UTF-8 for non-ASCII characters.
* CAPS LOCK does not work (silently ignored) for non-ASCII.
* Composing and dead keys continue to produce single-byte characters, i.e. invalid UTF-8 (unusable)
* Copying and pasting non-ASCII characters is impossible

Status as of unpatched 2.6.17.x:

* One can put the keyboard driver into Unicode mode, load a Unicode keymap, and get single keystrokes generate valid UTF-8 for non-ASCII characters.
* CAPS LOCK does not work (silently ignored) for non-ASCII.
* Composing and dead keys can produce non-ASCII characters. They do this by assuming that the result should be converted from ISO-8859-1, see drivers/char/keyboard.c which calls to_utf8() with a byte as a second argument. This means that only characters present in Latin-1 (i.e., with codes <256) can be produced by composing while the keyboard is in Unicode mode. This is certainly unacceptable for Eastern Europe (i.e., former ISO-8859-2 users) who need to get ^+ Z = Ž.
* Copying and pasting non-ASCII characters is impossible

While the proper way to get the later two issues resolved is definitely to extend struct kbdiacr to produce a Unicode value, not a byte, as the result, this would require making incompatible changes to kbd. Instead, the patch below takes the byte from the existing struct kbdiacr and converts it into a proper Unicode value by using the currently loaded application charset map. This does NOT change the meaning of any existing ioctl, because the application charset map is unused in UTF-8 mode. So, e.g., for Czech, one should do:

setfont -m 8859-2 LatArCyrHeb-16 # the important part is "-m 8859-2"
echo -en '\033%G'
kbd_mode -u
loadkeys cz # need to convert to Unicode
dumpkeys -c iso-8859-2 loadkeys -u

Unfortunately, accents still cannot be placed on multibyte characters. This means that the below patch is still not suitable for Vietnameze (more than one accent on the character) or Greek (where one needs to do ' + α = ά).

Copy-and-paste is handled by guessing which Unicode character most likely corresponds to the glyph on the screen. Guesswork is needed because many characters can map to the same glyph.

No harm is done to existing non-Unicode setups.

This is unrelated to and doesn't interfere with the UTF-8 output patch from http://lkml.org/lkml/2006/8/4/129 (which is also good).

Signed-off-by: Alexander E. Patrakov <[email protected]>
Origin: http://chris.heathens.co.nz/linux/downloads/patches-2.6.4-cdh1.tar.gz
---
diff -ur linux-2.6.17-rc3.orig/drivers/char/consolemap.c linux-2.6.17-rc3.my/drivers/char/consolemap.c
--- linux-2.6.17-rc3.orig/drivers/char/consolemap.c	2005-12-25 10:00:12.000000000 +0500
+++ linux-2.6.17-rc3.my/drivers/char/consolemap.c	2005-12-25 10:01:22.000000000 +0500
@@ -178,6 +178,7 @@
	unsigned long	refcount;
	unsigned long	sum;
	unsigned char	*inverse_translations[4];
+	u16		*inverse_trans_unicode;
	int		readonly;
};

@@ -208,6 +209,41 @@
	}
}

+static void set_inverse_trans_unicode(struct vc_data *conp, + struct uni_pagedir *p)
+{
+	int i, j, k, glyph;
+	u16 **p1, *p2;
+	u16 *q;
+	
+	if (!p) return;
+	q = p->inverse_trans_unicode;
+	if (!q) {
+		q = p->inverse_trans_unicode =
+			kmalloc(MAX_GLYPH * sizeof(u16), GFP_KERNEL);
+		if (!q)
+			return;
+	}
+	memset(q, 0, MAX_GLYPH * sizeof(u16));
+
+	for (i = 0; i < 32; i++) {
+		p1 = p->uni_pgdir[i];
+		if (!p1)
+			continue;
+		for (j = 0; j < 32; j++) {
+			p2 = p1[j];
+			if (!p2)
+				continue;
+			for (k = 0; k < 64; k++) {
+				glyph = p2[k];
+ if (glyph >= 0 && glyph < MAX_GLYPH + && q[glyph] < 32)
+		  			q[glyph] = (i << 11) + (j << 6) + k;
+			}
+		}
+	}
+}
+
unsigned short *set_translate(int m, struct vc_data *vc)
{
	inv_translate[vc->vc_num] = m;
@@ -218,19 +254,29 @@
 * Inverse translation is impossible for several reasons:
 * 1. The font<->character maps are not 1-1.
 * 2. The text may have been written while a different translation map
- *    was active, or using Unicode.
+ *    was active.
 * Still, it is now possible to a certain extent to cut and paste non-ASCII.
 */
-unsigned char inverse_translate(struct vc_data *conp, int glyph)
+u16 inverse_translate(struct vc_data *conp, int glyph, int use_unicode)
{
	struct uni_pagedir *p;
+	int m;
	if (glyph < 0 || glyph >= MAX_GLYPH)
		return 0;
-	else if (!(p = (struct uni_pagedir *)*conp->vc_uni_pagedir_loc) ||
-		 !p->inverse_translations[inv_translate[conp->vc_num]])
+	else if (!(p = (struct uni_pagedir *)*conp->vc_uni_pagedir_loc))
		return glyph;
-	else
-		return p->inverse_translations[inv_translate[conp->vc_num]][glyph];
+	else if (use_unicode) {
+		if (!p->inverse_trans_unicode)
+			return glyph;
+		else
+			return p->inverse_trans_unicode[glyph];
+	} else {
+		m = inv_translate[conp->vc_num];
+		if (!p->inverse_translations[m])
+			return glyph;
+		else
+			return p->inverse_translations[m][glyph];
+	}
}

static void update_user_maps(void)
@@ -244,6 +290,7 @@
		p = (struct uni_pagedir *)*vc_cons[i].d->vc_uni_pagedir_loc;
		if (p && p != q) {
			set_inverse_transl(vc_cons[i].d, p, USER_MAP);
+			set_inverse_trans_unicode(vc_cons[i].d, p);
			q = p;
		}
	}
@@ -354,6 +401,10 @@
		kfree(p->inverse_translations[i]);
		p->inverse_translations[i] = NULL;
	}
+	if (p->inverse_trans_unicode) {
+		kfree(p->inverse_trans_unicode);
+		p->inverse_trans_unicode = NULL;
+	}
}

void con_free_unimap(struct vc_data *vc)
@@ -512,6 +563,7 @@

	for (i = 0; i <= 3; i++)
		set_inverse_transl(vc, p, i); /* Update all inverse translations */
+	set_inverse_trans_unicode(vc, p);
return err;
}
@@ -562,6 +614,7 @@

	for (i = 0; i <= 3; i++)
		set_inverse_transl(vc, p, i);	/* Update all inverse translations */
+	set_inverse_trans_unicode(vc, p);
	dflt = p;
	return err;
}
@@ -618,6 +671,19 @@
		p->readonly = rdonly;
}

+/* may be called during an interrupt */
+u32 conv_8bit_to_uni(unsigned char c)
+{
+ /* + * Always use USER_MAP. This function is used by the keyboard,
+	 * which shouldn't be affected by G0/G1 switching, etc.
+ * If the user map still contains default values, i.e. the + * direct-to-font mapping, then assume user is using Latin1.
+	 */
+	unsigned short uni = translations[USER_MAP][c];
+	return uni == (0xf000 | c) ? c : uni;
+}
+
int
conv_uni_to_pc(struct vc_data *conp, long ucs) {
diff -ur linux-2.6.17-rc3.orig/drivers/char/keyboard.c linux-2.6.17-rc3.my/drivers/char/keyboard.c
--- linux-2.6.17-rc3.orig/drivers/char/keyboard.c	2006-05-09 02:39:23.000000000 +0600
+++ linux-2.6.17-rc3.my/drivers/char/keyboard.c	2006-05-09 06:38:24.000000000 +0600
@@ -34,6 +34,7 @@
#include <linux/init.h>
#include <linux/slab.h>

+#include <linux/consolemap.h>
#include <linux/kbd_kern.h>
#include <linux/kbd_diacr.h>
#include <linux/vt_kern.h>
@@ -329,10 +330,9 @@
 * Many other routines do put_queue, but I think either
 * they produce ASCII, or they produce some user-assigned
 * string, and in both cases we might assume that it is
- * in utf-8 already. UTF-8 is defined for words of up to 31 bits,
- * but we need only 16 bits here
+ * in utf-8 already.
 */
-static void to_utf8(struct vc_data *vc, ushort c)
+static void to_utf8(struct vc_data *vc, uint c)
{
	if (c < 0x80)
		/*  0******* */
@@ -341,11 +341,21 @@
		/* 110***** 10****** */
		put_queue(vc, 0xc0 | (c >> 6));
		put_queue(vc, 0x80 | (c & 0x3f));
-	} else {
+    	} else if (c < 0x10000) {
+	       	if (c >= 0xD800 && c < 0xE000)
+			return;
+		if (c == 0xFFFF)
+			return;
		/* 1110**** 10****** 10****** */
		put_queue(vc, 0xe0 | (c >> 12));
		put_queue(vc, 0x80 | ((c >> 6) & 0x3f));
		put_queue(vc, 0x80 | (c & 0x3f));
+    	} else if (c < 0x110000) {
+		/* 11110*** 10****** 10****** 10****** */
+		put_queue(vc, 0xf0 | (c >> 18));
+		put_queue(vc, 0x80 | ((c >> 12) & 0x3f));
+		put_queue(vc, 0x80 | ((c >> 6) & 0x3f));
+		put_queue(vc, 0x80 | (c & 0x3f));
	}
}

@@ -414,7 +424,7 @@
		return d;

	if (kbd->kbdmode == VC_UNICODE)
-		to_utf8(vc, d);
+		to_utf8(vc, conv_8bit_to_uni(d));
	else if (d < 0x100)
		put_queue(vc, d);

@@ -428,7 +438,7 @@
{
	if (diacr) {
		if (kbd->kbdmode == VC_UNICODE)
-			to_utf8(vc, diacr);
+			to_utf8(vc, conv_8bit_to_uni(diacr));
		else if (diacr < 0x100)
			put_queue(vc, diacr);
		diacr = 0;
@@ -640,7 +650,7 @@
		return;
	}
	if (kbd->kbdmode == VC_UNICODE)
-		to_utf8(vc, value);
+		to_utf8(vc, conv_8bit_to_uni(value));
	else if (value < 0x100)
		put_queue(vc, value);
}
@@ -798,7 +808,7 @@
	/* kludge */
	if (up_flag && shift_state != old_state && npadch != -1) {
		if (kbd->kbdmode == VC_UNICODE)
-			to_utf8(vc, npadch & 0xffff);
+			to_utf8(vc, npadch);
		else
			put_queue(vc, npadch & 0xff);
		npadch = -1;
diff -ur linux-2.6.17-rc3.orig/drivers/char/selection.c linux-2.6.17-rc3.my/drivers/char/selection.c
--- linux-2.6.17-rc3.orig/drivers/char/selection.c	2005-12-25 10:00:12.000000000 +0500
+++ linux-2.6.17-rc3.my/drivers/char/selection.c	2005-12-25 10:01:22.000000000 +0500
@@ -20,6 +20,7 @@

#include <asm/uaccess.h>

+#include <linux/kbd_kern.h>
#include <linux/vt_kern.h>
#include <linux/consolemap.h>
#include <linux/selection.h>
@@ -34,6 +35,7 @@
/* Variables for selection control. */
/* Use a dynamic buffer, instead of static (Dec 1994) */
struct vc_data *sel_cons;		/* must not be disallocated */
+static int use_unicode;
static volatile int sel_start = -1; 	/* cleared by clear_selection */
static int sel_end;
static int sel_buffer_lth;
@@ -54,10 +56,11 @@
	complement_pos(sel_cons, where);
}

-static unsigned char
+static u16
sel_pos(int n)
{
-	return inverse_translate(sel_cons, screen_glyph(sel_cons, n));
+	return inverse_translate(sel_cons, screen_glyph(sel_cons, n),
+				use_unicode);
}

/* remove the current selection highlight, if any,
@@ -86,8 +89,8 @@
  0xFF7FFFFF  /* latin-1 accented letters, not division sign */
};

-static inline int inword(const unsigned char c) {
-	return ( inwordLut[c>>5] >> (c & 0x1F) ) & 1;
+static inline int inword(const u16 c) {
+	return c > 0xff || (( inwordLut[c>>5] >> (c & 0x1F) ) & 1);
}

/* set inwordLut contents. Invoked by ioctl(). */
@@ -108,13 +111,36 @@
	return (v > u) ? u : v;
}

+/* stores the char in UTF8 and returns the number of bytes used (1-3) */
+int store_utf8(u16 c, char *p) +{
+	if (c < 0x80) {
+		/*  0******* */
+		p[0] = c;
+		return 1;
+	} else if (c < 0x800) {
+		/* 110***** 10****** */
+		p[0] = 0xc0 | (c >> 6);
+		p[1] = 0x80 | (c & 0x3f);
+		return 2;
+    	} else {
+		/* 1110**** 10****** 10****** */
+		p[0] = 0xe0 | (c >> 12);
+		p[1] = 0x80 | ((c >> 6) & 0x3f);
+		p[2] = 0x80 | (c & 0x3f);
+		return 3;
+    	}
+}
+
/* set the current selection. Invoked by ioctl() or by kernel code. */
int set_selection(const struct tiocl_selection __user *sel, struct tty_struct *tty)
{
	struct vc_data *vc = vc_cons[fg_console].d;
	int sel_mode, new_sel_start, new_sel_end, spc;
	char *bp, *obp;
-	int i, ps, pe;
+	int i, ps, pe, multiplier;
+	u16 c;
+	struct kbd_struct *kbd = kbd_table + fg_console;

	poke_blanked_console();

@@ -158,7 +184,8 @@
		clear_selection();
		sel_cons = vc_cons[fg_console].d;
	}
-
+	use_unicode = kbd && kbd->kbdmode == VC_UNICODE;
+	
	switch (sel_mode)
	{
		case TIOCL_SELCHAR:	/* character-by-character selection */
@@ -240,7 +267,8 @@
	sel_end = new_sel_end;

	/* Allocate a new buffer before freeing the old one ... */
-	bp = kmalloc((sel_end-sel_start)/2+1, GFP_KERNEL);
+	multiplier = use_unicode ? 3 : 1;  /* chars can take up to 3 bytes */
+	bp = kmalloc((sel_end-sel_start)/2*multiplier+1, GFP_KERNEL);
	if (!bp) {
		printk(KERN_WARNING "selection: kmalloc() failed\n");
		clear_selection();
@@ -251,8 +279,12 @@

	obp = bp;
	for (i = sel_start; i <= sel_end; i += 2) {
-		*bp = sel_pos(i);
-		if (!isspace(*bp++))
+		c = sel_pos(i);
+		if (use_unicode)
+			bp += store_utf8(c, bp);
+		else
+			*bp++ = c;
+		if (!isspace(c))
			obp = bp;
		if (! ((i + 2) % vc->vc_size_row)) {
			/* strip trailing blanks from line and add newline,
diff -ur linux-2.6.17-rc3.orig/include/linux/consolemap.h linux-2.6.17-rc3.my/include/linux/consolemap.h
--- linux-2.6.17-rc3.orig/include/linux/consolemap.h	2005-12-25 10:00:13.000000000 +0500
+++ linux-2.6.17-rc3.my/include/linux/consolemap.h	2005-12-25 10:01:22.000000000 +0500
@@ -10,6 +10,7 @@

struct vc_data;

-extern unsigned char inverse_translate(struct vc_data *conp, int glyph);
+extern u16 inverse_translate(struct vc_data *conp, int glyph, int use_unicode);
extern unsigned short *set_translate(int m, struct vc_data *vc);
extern int conv_uni_to_pc(struct vc_data *conp, long ucs);
+extern u32 conv_8bit_to_uni(unsigned char c);




-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux