Re: 2.6.18-rc3-mm2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 6/08/2006 10:08 p.m., Andrew Morton wrote:

ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.18-rc3/2.6.18-rc3-mm2/

- 2.6.18-rc3-mm1 gets mysterious udev timeouts during boot and crashes in
  NFS.  This kernel reverts the patches which were causing that.



Changes since 2.6.18-rc3-mm1:


+revert-x86_64-mm-i386-remove-lock-section.patch

 Revert patch which caues udev timeouts.

-knfsd-make-rpc-threads-pools-numa-aware-fix.patch

 Folded into knfsd-make-rpc-threads-pools-numa-aware.patch

+revert-knfsd-make-rpc-threads-pools-numa-aware.patch

 Revert patch which causes nfs crashes.


Seems to work well.
The only outstanding issue I have is with the "Generic ATA support" option which I believe should be detecting and driving my ATA DVD-RW. However it is giving this still on boot - it has never worked: 

ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part
ata1: SATA max UDMA/133 cmd 0xFFFFC2000000E100 ctl 0x0 bmdma 0x0 irq 314
ata2: SATA max UDMA/133 cmd 0xFFFFC2000000E180 ctl 0x0 bmdma 0x0 irq 314
ata3: SATA max UDMA/133 cmd 0xFFFFC2000000E200 ctl 0x0 bmdma 0x0 irq 314
ata4: SATA max UDMA/133 cmd 0xFFFFC2000000E280 ctl 0x0 bmdma 0x0 irq 314
scsi0 : ahci
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-7, max UDMA/133, 586072368 sectors: LBA48 NCQ (depth 31/32)
ata1.00: ata1: dev 0 multi count 16
ata1.00: configured for UDMA/133
scsi1 : ahci
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATA-6, max UDMA/133, 156301488 sectors: LBA48 NCQ (depth 31/32)
ata2.00: ata2: dev 0 multi count 16
ata2.00: configured for UDMA/133
scsi2 : ahci
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-7, max UDMA/133, 586072368 sectors: LBA48 NCQ (depth 31/32)
ata3.00: ata3: dev 0 multi count 16
ata3.00: configured for UDMA/133
scsi3 : ahci
ata4: SATA link down (SStatus 0 SControl 300)
  Vendor: ATA       Model: ST3300622AS       Rev: 3.AA
  Type:   Direct-Access                      ANSI SCSI revision: 05
  Vendor: ATA       Model: ST380817AS        Rev: 3.42
  Type:   Direct-Access                      ANSI SCSI revision: 05
  Vendor: ATA       Model: ST3300622AS       Rev: 3.AA
  Type:   Direct-Access                      ANSI SCSI revision: 05
ata_piix 0000:00:1f.1: version 2.00ac6
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1f.1 to 64
ata5: PATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x30B0 irq 14
scsi4 : ata_piix
ata5.00: ATAPI, max UDMA/66
ata5.00: configured for UDMA/66
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata5.00: (BMDMA stat 0x24)
ata5.00: tag 0 cmd 0xa0 Emask 0x4 stat 0x40 err 0x0 (timeout)
ata5: soft resetting port
ata5.00: configured for UDMA/66
ata5: EH complete
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata5.00: (BMDMA stat 0x24)
ata5.00: tag 0 cmd 0xa0 Emask 0x4 stat 0x40 err 0x0 (timeout)
ata5: soft resetting port
ata5.00: configured for UDMA/66
ata5: EH complete
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata5.00: (BMDMA stat 0x24)
ata5.00: tag 0 cmd 0xa0 Emask 0x4 stat 0x40 err 0x0 (timeout)
ata5: soft resetting port
ata5.00: configured for UDMA/66
ata5: EH complete
ata5.00: limiting speed to UDMA/44
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata5.00: (BMDMA stat 0x24)
ata5.00: tag 0 cmd 0xa0 Emask 0x4 stat 0x40 err 0x0 (timeout)
ata5: soft resetting port
ata5.00: configured for UDMA/44
ata5: EH complete
SCSI device sda: 586072368 512-byte hdwr sectors (300069 MB)

And no DVD-RW :-(

I posted some information about it to LKML on 10/07/06

 ATAPI CD-ROM, with removable media
        Model Number:       PIONEER DVD-RW  DVR-111D
        Serial Number:      FADC005671WL
        Firmware Revision:  1.23
 + more

but had no feedback.
Should I continue to ask/report it or should I just disable it for now and try again in a few months to see if it works? 

Reuben
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/
[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux