Some additional clean up only on the -mm tree. Moves the adjust
functions into kernel/time/clocksource.c .
These functions directly modify the clocksource multiplier based
on ntp error. These adjustments will effect other users of that
clock. This hasn't been addressed in my patch set, since it
needs some discussion.
Signed-Off-By: Daniel Walker <[email protected]>
---
include/linux/clocksource.h | 1
kernel/time/clocksource.c | 90 ++++++++++++++++++++++++++++++++++++++++++++
kernel/timer.c | 83 ----------------------------------------
3 files changed, 91 insertions(+), 83 deletions(-)
Index: linux-2.6.17/include/linux/clocksource.h
===================================================================
--- linux-2.6.17.orig/include/linux/clocksource.h
+++ linux-2.6.17/include/linux/clocksource.h
@@ -217,6 +217,7 @@ extern int clocksource_sysfs_register(st
extern void clocksource_sysfs_unregister(struct sysdev_attribute*);
extern void clocksource_rating_change(struct clocksource*);
extern struct clocksource * clocksource_get_clock(char*);
+extern void clocksource_adjust(struct clocksource *, s64);
/**
* clocksource_get_best_clock - Finds highest rated clocksource
Index: linux-2.6.17/kernel/time/clocksource.c
===================================================================
--- linux-2.6.17.orig/kernel/time/clocksource.c
+++ linux-2.6.17/kernel/time/clocksource.c
@@ -57,6 +57,96 @@ int clocksource_notifier_register(struct
return atomic_notifier_chain_register(&clocksource_list_notifier, nb);
}
+/*
+ * If the error is already larger, we look ahead even further
+ * to compensate for late or lost adjustments.
+ */
+static __always_inline int
+clocksource_bigadjust(struct clocksource *clock, s64 error, s64 *interval,
+ s64 *offset)
+{
+ s64 tick_error, i;
+ u32 look_ahead, adj;
+ s32 error2, mult;
+
+ /*
+ * Use the current error value to determine how much to look ahead.
+ * The larger the error the slower we adjust for it to avoid problems
+ * with losing too many ticks, otherwise we would overadjust and
+ * produce an even larger error. The smaller the adjustment the
+ * faster we try to adjust for it, as lost ticks can do less harm
+ * here. This is tuned so that an error of about 1 msec is adusted
+ * within about 1 sec (or 2^20 nsec in 2^SHIFT_HZ ticks).
+ */
+ error2 = clock->error >> (TICK_LENGTH_SHIFT + 22 - 2 * SHIFT_HZ);
+ error2 = abs(error2);
+ for (look_ahead = 0; error2 > 0; look_ahead++)
+ error2 >>= 2;
+
+ /*
+ * Now calculate the error in (1 << look_ahead) ticks, but first
+ * remove the single look ahead already included in the error.
+ */
+ tick_error = current_tick_length() >>
+ (TICK_LENGTH_SHIFT - clock->shift + 1);
+ tick_error -= clock->xtime_interval >> 1;
+ error = ((error - tick_error) >> look_ahead) + tick_error;
+
+ /* Finally calculate the adjustment shift value. */
+ i = *interval;
+ mult = 1;
+ if (error < 0) {
+ error = -error;
+ *interval = -*interval;
+ *offset = -*offset;
+ mult = -1;
+ }
+ for (adj = 0; error > i; adj++)
+ error >>= 1;
+
+ *interval <<= adj;
+ *offset <<= adj;
+ return mult << adj;
+}
+
+/*
+ * Adjust the multiplier to reduce the error value,
+ * this is optimized for the most common adjustments of -1,0,1,
+ * for other values we can do a bit more work.
+ */
+void clocksource_adjust(struct clocksource *clock, s64 offset)
+{
+ s64 error, interval = clock->cycle_interval;
+ int adj;
+
+ error = clock->error >> (TICK_LENGTH_SHIFT - clock->shift - 1);
+ if (error > interval) {
+ error >>= 2;
+ if (likely(error <= interval))
+ adj = 1;
+ else
+ adj = clocksource_bigadjust(clock, error, &interval,
+ &offset);
+ } else if (error < -interval) {
+ error >>= 2;
+ if (likely(error >= -interval)) {
+ adj = -1;
+ interval = -interval;
+ offset = -offset;
+ } else
+ adj = clocksource_bigadjust(clock, error, &interval,
+ &offset);
+ } else
+ return;
+
+ clock->mult += adj;
+ clock->xtime_interval += interval;
+ clock->xtime_nsec -= offset;
+ clock->error -= (interval - offset) <<
+ (TICK_LENGTH_SHIFT - clock->shift);
+}
+
+
/**
* __is_registered - Returns a clocksource if it's registered
* @name: name of the clocksource to return
Index: linux-2.6.17/kernel/timer.c
===================================================================
--- linux-2.6.17.orig/kernel/timer.c
+++ linux-2.6.17/kernel/timer.c
@@ -1140,89 +1140,6 @@ static int __init timekeeping_init_devic
device_initcall(timekeeping_init_device);
/*
- * If the error is already larger, we look ahead even further
- * to compensate for late or lost adjustments.
- */
-static __always_inline int clocksource_bigadjust(s64 error, s64 *interval, s64 *offset)
-{
- s64 tick_error, i;
- u32 look_ahead, adj;
- s32 error2, mult;
-
- /*
- * Use the current error value to determine how much to look ahead.
- * The larger the error the slower we adjust for it to avoid problems
- * with losing too many ticks, otherwise we would overadjust and
- * produce an even larger error. The smaller the adjustment the
- * faster we try to adjust for it, as lost ticks can do less harm
- * here. This is tuned so that an error of about 1 msec is adusted
- * within about 1 sec (or 2^20 nsec in 2^SHIFT_HZ ticks).
- */
- error2 = clock->error >> (TICK_LENGTH_SHIFT + 22 - 2 * SHIFT_HZ);
- error2 = abs(error2);
- for (look_ahead = 0; error2 > 0; look_ahead++)
- error2 >>= 2;
-
- /*
- * Now calculate the error in (1 << look_ahead) ticks, but first
- * remove the single look ahead already included in the error.
- */
- tick_error = current_tick_length() >> (TICK_LENGTH_SHIFT - clock->shift + 1);
- tick_error -= clock->xtime_interval >> 1;
- error = ((error - tick_error) >> look_ahead) + tick_error;
-
- /* Finally calculate the adjustment shift value. */
- i = *interval;
- mult = 1;
- if (error < 0) {
- error = -error;
- *interval = -*interval;
- *offset = -*offset;
- mult = -1;
- }
- for (adj = 0; error > i; adj++)
- error >>= 1;
-
- *interval <<= adj;
- *offset <<= adj;
- return mult << adj;
-}
-
-/*
- * Adjust the multiplier to reduce the error value,
- * this is optimized for the most common adjustments of -1,0,1,
- * for other values we can do a bit more work.
- */
-static void clocksource_adjust(struct clocksource *clock, s64 offset)
-{
- s64 error, interval = clock->cycle_interval;
- int adj;
-
- error = clock->error >> (TICK_LENGTH_SHIFT - clock->shift - 1);
- if (error > interval) {
- error >>= 2;
- if (likely(error <= interval))
- adj = 1;
- else
- adj = clocksource_bigadjust(error, &interval, &offset);
- } else if (error < -interval) {
- error >>= 2;
- if (likely(error >= -interval)) {
- adj = -1;
- interval = -interval;
- offset = -offset;
- } else
- adj = clocksource_bigadjust(error, &interval, &offset);
- } else
- return;
-
- clock->mult += adj;
- clock->xtime_interval += interval;
- clock->xtime_nsec -= offset;
- clock->error -= (interval - offset) << (TICK_LENGTH_SHIFT - clock->shift);
-}
-
-/*
* update_wall_time - Uses the current clocksource to increment the wall time
*
* Called from the timer interrupt, must hold a write on xtime_lock.
--
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
