AD7414 Temperature Sensor I2C driver. I2C chip driver for the Analog
Devices AD7414 device, exposes raw and decoded registers via sysfs.
Signed-off-by: Theuns Verwoerd <[email protected]>
---
Tested on a custom EP9315-based board developed in-house. Fairly trivial
driver; really just exposes the raw registers and temperature reading
to userspace.
Patch is relative to stock Linux-2.6.17.7
[This is my first go at a kernel submission, so feel free to point out
anything
that should be done differently]
---
diff -uprN -X linux-2.6.17.7-vanilla/Documentation/dontdiff
linux-2.6.17.7-vanilla/drivers/i2c/chips/ad7414.c
linux-2.6.17.7/drivers/i2c/chips/ad7414.c
--- linux-2.6.17.7-vanilla/drivers/i2c/chips/ad7414.c 1970-01-01
12:00:00.000000000 +1200
+++ linux-2.6.17.7/drivers/i2c/chips/ad7414.c 2006-08-04
10:28:37.000000000 +1200
@@ -0,0 +1,283 @@
+/*
+ * AD7414 I2C Chip Driver
+ *
+ * Copyright (C) 2006 Theuns Verwoerd, Bluewater Systems
([email protected])
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, version 2 of the License.
+ *
+ * Simple I2C driver for Analog Devices AD7414 temperature sensor.
+ * Based on: lm75.c
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+
+/* Addresses to scan */
+static unsigned short normal_i2c[] = { 0x4a, I2C_CLIENT_END };
+
+/* Insmod parameters */
+I2C_CLIENT_INSMOD_1(ad7414);
+
+/* AD7414 Registers */
+#define AD7414_REG_TEMP 0
+#define AD7414_REG_CONF 1
+#define AD7414_REG_TEMP_HIGH 2
+#define AD7414_REG_TEMP_LOW 3
+
+/* Each client has this additional data */
+struct ad7414_data {
+ struct i2c_client client;
+ struct class_device *class_dev;
+ struct mutex update_lock;
+ char valid; /* !=0 if following fields are valid */
+ unsigned long last_updated; /* In jiffies */
+ u16 temp_value; /* Register values */
+ u16 temp_config;
+ u16 temp_high;
+ u16 temp_low;
+};
+
+static int ad7414_attach_adapter(struct i2c_adapter *adapter);
+static int ad7414_detect(struct i2c_adapter *adapter, int address,
+ int kind);
+static int ad7414_detach_client(struct i2c_client *client);
+static struct ad7414_data *ad7414_update_device(struct device *dev);
+static int ad7414_ADC_to_temp(int ADC);
+
+/* This is the driver that will be inserted */
+static struct i2c_driver ad7414_driver = {
+ .driver = {
+ .name = "ad7414",
+ },
+ .id = I2C_DRIVERID_AD7414,
+ .attach_adapter = ad7414_attach_adapter,
+ .detach_client = ad7414_detach_client,
+};
+
+#define show_raw(value) \
+static ssize_t show_raw_##value(struct device *dev, struct
device_attribute *attr, char *buf) \
+{ \
+ struct ad7414_data *data = ad7414_update_device(dev); \
+ \
+ return sprintf(buf, "0x%x\n", data->value); \
+}
+show_raw(temp_value);
+show_raw(temp_config);
+show_raw(temp_high);
+show_raw(temp_low);
+
+#define show(value) \
+static ssize_t show_##value(struct device *dev, struct device_attribute
*attr, char *buf) \
+{ \
+ struct ad7414_data *data = ad7414_update_device(dev); \
+ \
+ return sprintf(buf, "%dC\n", data->value); \
+}
+show(temp_high);
+show(temp_low);
+
+static ssize_t show_temp_value(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct ad7414_data *data = ad7414_update_device(dev);
+ return sprintf(buf, "%d.%02uC %s%s%s\n",
+ ad7414_ADC_to_temp(data->temp_value) / 100,
+ abs(ad7414_ADC_to_temp(data->temp_value)) % 100,
+ data->temp_value & 0x20 ? "ALERT " : "",
+ data->temp_value & 0x10 ? "THIGH " : "",
+ data->temp_value & 0x20 ? "TLOW " : "");
+}
+
+static ssize_t show_temp_config(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct ad7414_data *data = ad7414_update_device(dev);
+ return sprintf(buf, "0x%x %s%s%s%s%s%s%s\n", data->temp_config,
+ data->temp_config & 0x80 ? "POWEROFF " : "",
+ data->temp_config & 0x40 ? "NOFILTER " : "",
+ data->temp_config & 0x20 ? "NOALERT " : "",
+ data->temp_config & 0x10 ? "ALRTHIGH " : "ALRTLOW ",
+ data->temp_config & 0x08 ? "ALERTRST " : "",
+ data->temp_config & 0x04 ? "ONESHOT " : "",
+ data->temp_config & 0x03 ? "TESTMODE " : "");
+}
+
+#define set_raw(value, reg) \
+static ssize_t set_raw_##value(struct device *dev, struct
device_attribute *attr, const char *buf, size_t count) \
+{ \
+ struct i2c_client *client = to_i2c_client(dev); \
+ struct ad7414_data *data = i2c_get_clientdata(client); \
+ int value = simple_strtoul(buf, NULL, 0); \
+ \
+ mutex_lock(&data->update_lock); \
+ data->value = value; \
+ i2c_smbus_write_byte_data(client, reg, value); \
+ mutex_unlock(&data->update_lock); \
+ return count; \
+}
+set_raw(temp_config, AD7414_REG_CONF);
+set_raw(temp_high, AD7414_REG_TEMP_HIGH);
+set_raw(temp_low, AD7414_REG_TEMP_LOW);
+
+static DEVICE_ATTR(raw_config, S_IWUSR | S_IRUGO, show_raw_temp_config,
+ set_raw_temp_config);
+static DEVICE_ATTR(raw_high, S_IWUSR | S_IRUGO, show_raw_temp_high,
+ set_raw_temp_high);
+static DEVICE_ATTR(raw_low, S_IWUSR | S_IRUGO, show_raw_temp_low,
+ set_raw_temp_low);
+static DEVICE_ATTR(raw_value, S_IRUGO, show_raw_temp_value, NULL);
+
+static DEVICE_ATTR(temp_config, S_IRUGO, show_temp_config, NULL);
+static DEVICE_ATTR(temp_high, S_IRUGO, show_temp_high, NULL);
+static DEVICE_ATTR(temp_low, S_IRUGO, show_temp_low, NULL);
+static DEVICE_ATTR(temp_value, S_IRUGO, show_temp_value, NULL);
+
+static int ad7414_ADC_to_temp(int ADC)
+{
+ /* ADC temp is D15..D6, two's complement, but it's only 10 bits */
+ ADC = ADC >> 6;
+ if (ADC > 0x200) {
+ return (((ADC & 0x1ff) - 512) * 100 / 4);
+ } else {
+ return (ADC * 100 / 4);
+ }
+}
+
+static int ad7414_read_value(struct i2c_client *client, u8 reg)
+{
+ int value = ~0;
+ switch (reg) {
+ case AD7414_REG_TEMP: /* 10-bit register, MSB first */
+ value = swab16(i2c_smbus_read_word_data(client, reg));
+ break;
+ default: /* 8-bit register */
+ value = i2c_smbus_read_byte_data(client, reg);
+ break;
+ }
+ return value;
+}
+
+static int ad7414_attach_adapter(struct i2c_adapter *adapter)
+{
+ return i2c_probe(adapter, &addr_data, ad7414_detect);
+}
+
+/* This function is called by i2c_probe */
+static int ad7414_detect(struct i2c_adapter *adapter, int address,
+ int kind)
+{
+ struct i2c_client *new_client = NULL;
+ struct ad7414_data *data = NULL;
+ int err = 0;
+
+ if (!i2c_check_functionality
+ (adapter, I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA))
+ goto error;
+
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ if (!data) {
+ err = -ENOMEM;
+ goto error;
+ }
+
+ new_client = &data->client;
+ i2c_set_clientdata(new_client, data);
+ new_client->addr = address;
+ new_client->adapter = adapter;
+ new_client->driver = &ad7414_driver;
+ new_client->flags = 0;
+
+ /* Fill in the remaining client fields */
+ strncpy(new_client->name, "ad7414", I2C_NAME_SIZE);
+ data->valid = 0;
+ mutex_init(&data->update_lock);
+
+ /* Tell the I2C layer a new client has arrived */
+ err = i2c_attach_client(new_client);
+ if (err)
+ goto error;
+
+ /* Register sysfs files */
+ device_create_file(&new_client->dev, &dev_attr_raw_config);
+ device_create_file(&new_client->dev, &dev_attr_raw_high);
+ device_create_file(&new_client->dev, &dev_attr_raw_low);
+ device_create_file(&new_client->dev, &dev_attr_raw_value);
+
+ device_create_file(&new_client->dev, &dev_attr_temp_config);
+ device_create_file(&new_client->dev, &dev_attr_temp_high);
+ device_create_file(&new_client->dev, &dev_attr_temp_low);
+ device_create_file(&new_client->dev, &dev_attr_temp_value);
+
+ return 0;
+
+ error:
+ kfree(data);
+ return err;
+}
+
+static int ad7414_detach_client(struct i2c_client *client)
+{
+ struct ad7414_data *data = i2c_get_clientdata(client);
+ int err;
+
+ err = i2c_detach_client(client);
+ if (err) {
+ dev_err(&client->dev,
+ "Client deregistration failed, client not detached.\n");
+ return err;
+ }
+ kfree(data);
+ return 0;
+}
+
+static struct ad7414_data *ad7414_update_device(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct ad7414_data *data = i2c_get_clientdata(client);
+
+ mutex_lock(&data->update_lock);
+
+ if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+ || !data->valid) {
+ dev_dbg(&client->dev, "Starting ad7414 update\n");
+
+ data->temp_value =
+ ad7414_read_value(client, AD7414_REG_TEMP);
+ data->temp_config =
+ ad7414_read_value(client, AD7414_REG_CONF);
+ data->temp_high =
+ ad7414_read_value(client, AD7414_REG_TEMP_HIGH);
+ data->temp_low =
+ ad7414_read_value(client, AD7414_REG_TEMP_LOW);
+ data->last_updated = jiffies;
+ data->valid = 1;
+ }
+
+ mutex_unlock(&data->update_lock);
+
+ return data;
+}
+
+static int __init ad7414_init(void)
+{
+ return i2c_add_driver(&ad7414_driver);
+}
+
+static void __exit ad7414_exit(void)
+{
+ i2c_del_driver(&ad7414_driver);
+}
+
+
+MODULE_AUTHOR("Theuns Verwoerd <[email protected]>");
+MODULE_DESCRIPTION("AD7414 I2C driver");
+MODULE_LICENSE("GPL");
+
+module_init(ad7414_init);
+module_exit(ad7414_exit);
diff -uprN -X linux-2.6.17.7-vanilla/Documentation/dontdiff
linux-2.6.17.7-vanilla/drivers/i2c/chips/Kconfig
linux-2.6.17.7/drivers/i2c/chips/Kconfig
--- linux-2.6.17.7-vanilla/drivers/i2c/chips/Kconfig 2006-07-25
15:36:01.000000000 +1200
+++ linux-2.6.17.7/drivers/i2c/chips/Kconfig 2006-08-04
10:21:13.000000000 +1200
@@ -25,6 +25,16 @@ config SENSORS_DS1374
This driver can also be built as a module. If so, the module
will be called ds1374.
+config SENSORS_AD7414
+ tristate "Analog Devices AD7414-0 Temperature Sensor"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for Analog Devices
+ AD7414-0 temperature sensor.
+
+ This driver can also be built as a module. If so, the module
+ will be called ad7414.
+
config SENSORS_EEPROM
tristate "EEPROM reader"
depends on I2C && EXPERIMENTAL
diff -uprN -X linux-2.6.17.7-vanilla/Documentation/dontdiff
linux-2.6.17.7-vanilla/drivers/i2c/chips/Makefile
linux-2.6.17.7/drivers/i2c/chips/Makefile
--- linux-2.6.17.7-vanilla/drivers/i2c/chips/Makefile 2006-07-25
15:36:01.000000000 +1200
+++ linux-2.6.17.7/drivers/i2c/chips/Makefile 2006-08-04
10:18:48.000000000 +1200
@@ -12,6 +12,7 @@ obj-$(CONFIG_SENSORS_PCF8574) += pcf8574
obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o
obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o
obj-$(CONFIG_TPS65010) += tps65010.o
+obj-$(CONFIG_SENSORS_AD7414) += ad7414.o
ifeq ($(CONFIG_I2C_DEBUG_CHIP),y)
EXTRA_CFLAGS += -DDEBUG
diff -uprN -X linux-2.6.17.7-vanilla/Documentation/dontdiff
linux-2.6.17.7-vanilla/include/linux/i2c-id.h
linux-2.6.17.7/include/linux/i2c-id.h
--- linux-2.6.17.7-vanilla/include/linux/i2c-id.h 2006-07-25
15:36:01.000000000 +1200
+++ linux-2.6.17.7/include/linux/i2c-id.h 2006-08-04
10:10:39.000000000 +1200
@@ -112,6 +112,7 @@
#define I2C_DRIVERID_X1205 82 /* Xicor/Intersil X1205 RTC */
#define I2C_DRIVERID_PCF8563 83 /* Philips PCF8563 RTC */
#define I2C_DRIVERID_RS5C372 84 /* Ricoh RS5C372 RTC */
+#define I2C_DRIVERID_AD7414 85 /* AD7414 I2C Chip Driver */
#define I2C_DRIVERID_I2CDEV 900
#define I2C_DRIVERID_ARP 902 /* SMBus ARP Client */
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
