On Mon, Jul 31, 2006 at 01:14:05PM -0600, Robert Hancock wrote:
> per watt. As well, when the CPU has nothing to do it will be halted
> anyway which does pretty much the same as what clockmod is doing.
You are empirically wrong in my case. I can't make you hear the difference
in noise, but perhaps this will convince you:
$ sensors | grep CPU
CPU_Fan: 2359 RPM (min = 4000 RPM)
CPU: +61 C (low = +10 C, high = +50 C)
$ sudo /etc/init.d/powernowd start
* Starting powernowd... [ ok ]
$ sensors | grep CPU
CPU_Fan: 1411 RPM (min = 4000 RPM)
CPU: +57 C (low = +10 C, high = +50 C)
$ sudo /etc/init.d/powernowd stop
* Stopping powernowd: [ ok ]
$ sensors | grep CPU
CPU_Fan: 2452 RPM (min = 4000 RPM)
CPU: +61 C (low = +10 C, high = +50 C)
And this with only seconds in between starting and stopping, on an idle
system.
> Essentially clockmod is there as a way to limit the thermal output of
> the CPU in thermal emergencies, it's not really very good as a
> power-saving feature.
That I've measured, and indeed, the same amount of power is drawn from the
mains. But the reduction in fan noise is worth it.
On this CPU, HLT may simply not be doing as good a job. Who knows.
processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 4
model name : Intel(R) Pentium(R) 4 CPU 3.00GHz
stepping : 1
cpu MHz : 3000.000
cache size : 1024 KB
It does reduce effective CPU to 300MHz though, which is a lot.
Kind regards,
bert
--
http://www.PowerDNS.com Open source, database driven DNS Software
http://netherlabs.nl Open and Closed source services
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
