Re: 3ware disk latency?

[dean gaudet <dean@arctic.org>]

On Mon, 10 Jul 2006, Jan Kasprzak wrote:

> 	Does anybody experience the similar latency problems with
> 3ware 95xx controllers? Thanks,

i think the 95xx is really bad at sharing its cache fairly amongst 
multiple devices... i have a 9550sx-8lp with 3 exported units: a raid1, a 
raid10 and a jbod.  i was zeroing the jbod with dd and it absolutely 
destroyed the latency of the other two units.

to make things sane i had to add oflag=direct to dd to avoid dirtying all 
of memory... and i had to tell the 3ware to disable write caching on the 
jbod device.

the result is a fairly slow throughput on the dd (20MB/s) ... but at least 
the latency of the raid1 and raid10 aren't being affected any more.

i suspect that telling the 9550sx to not use nvram limits the amount of 
its tiny 128MiB of RAM which can be consumed by that unit.

having to use oflag=direct indicates linux is at least partially at fault 
here... maybe there's some tunable i need to learn about... the system has 
8GiB of ram, maybe the default dirty ratio of 40% is too high.  but i 
suspect the problem is more that with dd dirtying memory immediately it 
causes the system to be stuck at the 40% dirty watermark which causes 
excessive write traffic even to the raid1/raid10 units because they too 
are contributing to the 40% dirty (temporary files and whatnot would hit 
disk when they wouldn't in normal operation).

i think since i'm using 3ware hw raid on this setup with only two units 
normally active it isn't as painful as what you're seeing with what looks 
like 8 JBOD units.

yeah i'm a bit disappointed... i neglected to benchmark this sort of 
concurrency thing when i was experimenting with the 9550sx before turning 
it live.  i'm curious if areca controllers handle this better.

-dean
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/