On Tue, Jul 25 2006, gmu 2k6 wrote:
> On 7/25/06, Jens Axboe <[email protected]> wrote:
> >On Tue, Jul 25 2006, Jens Axboe wrote:
> >> On Tue, Jul 25 2006, gmu 2k6 wrote:
> >> > On 7/25/06, Jens Axboe <[email protected]> wrote:
> >> > >On Tue, Jul 25 2006, gmu 2k6 wrote:
> >> > >> ok, let's nail it to 2.6.17-git5 instead as it survived git status
> >> > >> compared to -git6
> >> > >> which seems to have correctly booted by accident the lastime. timing
> >> > >issues
> >> > >> I guess.
> >> > >
> >> > >I will try and reproduce it here now. It seems to be in between commit
> >> > >271f18f102c789f59644bb6c53a69da1df72b2f4 and commit
> >> > >dd67d051529387f6e44d22d1d5540ef281965fdd where the first one could
> >also
> >> > >be bad.
> >> > >
> >> > >I'm assuming that acf421755593f7d7bd9352d57eda796c6eb4fa43 should be
> >> > >good, so you can try and verify that
> >> > >dd67d051529387f6e44d22d1d5540ef281965fdd is bad and bisect between the
> >> > >two. It's only about 6 commits, so should be quick enough to do.
> >> >
> >> > 1) no luck with remote serial console
> >> > 2) netconsole does not work although connecting to the listener with
> >netcat
> >> > and
> >> > sending strings works
> >> > I'm gonna try via physical rs232 9pins and see how that works.
> >> > afterwards I will try to bisect the revisions you mentioned.
> >> >
> >> > btw, the issue seems to come and go as I managed to boot log into a
> >.17-git6
> >> > kernel or is timing-dependent.
> >>
> >> I can reproduce it, you don't have to spend more time on bisecting or
> >> testing. This should fix it:
> >>
> >> diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
> >> index 1c4df22..1eac041 100644
> >> --- a/drivers/block/cciss.c
> >> +++ b/drivers/block/cciss.c
> >> @@ -1238,6 +1238,7 @@ static void cciss_softirq_done(struct re
> >> CommandList_struct *cmd = rq->completion_data;
> >> ctlr_info_t *h = hba[cmd->ctlr];
> >> unsigned long flags;
> >> + request_queue_t *q;
> >> u64bit temp64;
> >> int i, ddir;
> >>
> >> @@ -1260,10 +1261,13 @@ #ifdef CCISS_DEBUG
> >> printk("Done with %p\n", rq);
> >> #endif /* CCISS_DEBUG */
> >>
> >> + q = rq->q;
> >> +
> >> add_disk_randomness(rq->rq_disk);
> >> spin_lock_irqsave(&h->lock, flags);
> >> end_that_request_last(rq, rq->errors);
> >> cmd_free(h, cmd, 1);
> >> + blk_start_queue(q);
> >> spin_unlock_irqrestore(&h->lock, flags);
> >> }
> >>
> >>
> >> A better fix would rework the start_queue logic entirely in the driver,
> >> but the above should get you running for now. I'll take a further look.
> >
> >Something like this matches the current logic better. It's not very good
> >from a cpu efficiency point of view, but it's better than what is there
> >now since at least it's not in hard irq context.
> >
> >Not tested yet, will do so right now.
> >
> >diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
> >index 1c4df22..a9e0510 100644
> >--- a/drivers/block/cciss.c
> >+++ b/drivers/block/cciss.c
> >@@ -1233,6 +1233,50 @@ static inline void complete_buffers(stru
> > }
> > }
> >
> >+static void cciss_check_queues(ctlr_info_t *h)
> >+{
> >+ int start_queue = h->next_to_run;
> >+ int i;
> >+
> >+ /* check to see if we have maxed out the number of commands that
> >can
> >+ * be placed on the queue. If so then exit. We do this check here
> >+ * in case the interrupt we serviced was from an ioctl and did not
> >+ * free any new commands.
> >+ */
> >+ if ((find_first_zero_bit(h->cmd_pool_bits, NR_CMDS)) == NR_CMDS)
> >+ return;
> >+
> >+ /* We have room on the queue for more commands. Now we need to
> >queue
> >+ * them up. We will also keep track of the next queue to run so
> >+ * that every queue gets a chance to be started first.
> >+ */
> >+ for (i = 0; i < h->highest_lun + 1; i++) {
> >+ int curr_queue = (start_queue + i) % (h->highest_lun + 1);
> >+ /* make sure the disk has been added and the drive is real
> >+ * because this can be called from the middle of init_one.
> >+ */
> >+ if (!(h->drv[curr_queue].queue) ||
> >!(h->drv[curr_queue].heads))
> >+ continue;
> >+ blk_start_queue(h->gendisk[curr_queue]->queue);
> >+
> >+ /* check to see if we have maxed out the number of commands
> >+ * that can be placed on the queue.
> >+ */
> >+ if ((find_first_zero_bit(h->cmd_pool_bits, NR_CMDS)) ==
> >NR_CMDS) {
> >+ if (curr_queue == start_queue) {
> >+ h->next_to_run =
> >+ (start_queue + 1) % (h->highest_lun +
> >1);
> >+ break;
> >+ } else {
> >+ h->next_to_run = curr_queue;
> >+ break;
> >+ }
> >+ } else {
> >+ curr_queue = (curr_queue + 1) % (h->highest_lun +
> >1);
> >+ }
> >+ }
> >+}
> >+
> > static void cciss_softirq_done(struct request *rq)
> > {
> > CommandList_struct *cmd = rq->completion_data;
> >@@ -1264,6 +1308,7 @@ #endif /* CCISS_DEBUG */
> > spin_lock_irqsave(&h->lock, flags);
> > end_that_request_last(rq, rq->errors);
> > cmd_free(h, cmd, 1);
> >+ cciss_check_queues(h);
> > spin_unlock_irqrestore(&h->lock, flags);
> > }
> >
> >@@ -2528,8 +2573,6 @@ static irqreturn_t do_cciss_intr(int irq
> > CommandList_struct *c;
> > unsigned long flags;
> > __u32 a, a1, a2;
> >- int j;
> >- int start_queue = h->next_to_run;
> >
> > if (interrupt_not_for_us(h))
> > return IRQ_NONE;
> >@@ -2588,45 +2631,6 @@ # endif
> > }
> > }
> >
> >- /* check to see if we have maxed out the number of commands that
> >can
> >- * be placed on the queue. If so then exit. We do this check here
> >- * in case the interrupt we serviced was from an ioctl and did not
> >- * free any new commands.
> >- */
> >- if ((find_first_zero_bit(h->cmd_pool_bits, NR_CMDS)) == NR_CMDS)
> >- goto cleanup;
> >-
> >- /* We have room on the queue for more commands. Now we need to
> >queue
> >- * them up. We will also keep track of the next queue to run so
> >- * that every queue gets a chance to be started first.
> >- */
> >- for (j = 0; j < h->highest_lun + 1; j++) {
> >- int curr_queue = (start_queue + j) % (h->highest_lun + 1);
> >- /* make sure the disk has been added and the drive is real
> >- * because this can be called from the middle of init_one.
> >- */
> >- if (!(h->drv[curr_queue].queue) ||
> >!(h->drv[curr_queue].heads))
> >- continue;
> >- blk_start_queue(h->gendisk[curr_queue]->queue);
> >-
> >- /* check to see if we have maxed out the number of commands
> >- * that can be placed on the queue.
> >- */
> >- if ((find_first_zero_bit(h->cmd_pool_bits, NR_CMDS)) ==
> >NR_CMDS) {
> >- if (curr_queue == start_queue) {
> >- h->next_to_run =
> >- (start_queue + 1) % (h->highest_lun +
> >1);
> >- goto cleanup;
> >- } else {
> >- h->next_to_run = curr_queue;
> >- goto cleanup;
> >- }
> >- } else {
> >- curr_queue = (curr_queue + 1) % (h->highest_lun +
> >1);
> >- }
> >- }
> >-
> >- cleanup:
> > spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
> > return IRQ_HANDLED;
> > }
>
> this makes the cciss init hang.
hmm strange, it works for me. sysrq-t for the hang, please. just note
the top few functions, should be easy enough to write down manually.
--
Jens Axboe
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
