From: Jordan Crouse <[email protected]>
Some x86 implementations don't have a built in VGA / VESA BIOS. This
configuration option (enabled when EMBEDDED is selected), allows us to
avoid probing the VGA hardware during boot. This option also disables
the VGA console option, which depends heavily on the VGA / VESA probing.
Signed-off-by: Jordan Crouse <[email protected]>
---
arch/i386/Kconfig | 9 +++++++++
arch/i386/boot/setup.S | 5 +++++
drivers/video/Kconfig | 6 +++---
drivers/video/console/Kconfig | 4 ++--
4 files changed, 19 insertions(+), 5 deletions(-)
diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig
index daa75ce..d8935d9 100644
--- a/arch/i386/Kconfig
+++ b/arch/i386/Kconfig
@@ -735,6 +735,15 @@ config SECCOMP
If unsure, say Y. Only embedded should say N here.
+config VGA_NOPROBE
+ bool "Don't probe VGA at boot" if EMBEDDED
+ default n
+ help
+ Saying Y here will cause the kernel to not probe VGA at boot time.
+ This will break everything that depends on the probed screen
+ data. Say N here unless you are absolutely sure this is what you
+ want.
+
source kernel/Kconfig.hz
config KEXEC
diff --git a/arch/i386/boot/setup.S b/arch/i386/boot/setup.S
index d2b684c..d63bd9d 100644
--- a/arch/i386/boot/setup.S
+++ b/arch/i386/boot/setup.S
@@ -394,10 +394,13 @@ # Set the keyboard repeat rate to the ma
xorw %bx, %bx
int $0x16
+#ifndef CONFIG_VGA_NOPROBE
+
# Check for video adapter and its parameters and allow the
# user to browse video modes.
call video # NOTE: we need %ds pointing
# to bootsector
+#endif
# Get hd0 data...
xorw %ax, %ax
@@ -1006,9 +1009,11 @@ gdt_48:
.word gdt_end - gdt - 1 # gdt limit
.word 0, 0 # gdt base (filled in later)
+#ifndef CONFIG_VGA_NOPROBE
# Include video setup & detection code
#include "video.S"
+#endif
# Setup signature -- must be last
setup_sig1: .word SIG1
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 6533b0f..21bf515 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -540,7 +540,7 @@ config FB_TGA
config FB_VESA
bool "VESA VGA graphics support"
- depends on (FB = y) && X86
+ depends on (FB = y) && X86 && !VGA_NOPROBE
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
@@ -828,7 +828,7 @@ config FB_I810_I2C
config FB_INTEL
tristate "Intel 830M/845G/852GM/855GM/865G support (EXPERIMENTAL)"
- depends on FB && EXPERIMENTAL && PCI && X86
+ depends on FB && EXPERIMENTAL && PCI && X86 && !VGA_NOPROBE
select AGP
select AGP_INTEL
select FB_MODE_HELPERS
@@ -1166,7 +1166,7 @@ config FB_SAVAGE_ACCEL
config FB_SIS
tristate "SiS/XGI display support"
- depends on FB && PCI
+ depends on FB && PCI && !VGA_NOPROBE
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig
index 4444bef..0be8e3b 100644
--- a/drivers/video/console/Kconfig
+++ b/drivers/video/console/Kconfig
@@ -5,8 +5,8 @@ #
menu "Console display driver support"
config VGA_CONSOLE
- bool "VGA text console" if EMBEDDED || !X86
- depends on !ARCH_ACORN && !ARCH_EBSA110 && !4xx && !8xx && !SPARC && !M68K && !PARISC && !FRV && !ARCH_VERSATILE
+ bool "VGA text console" if (EMBEDDED || !X86)
+ depends on !ARCH_ACORN && !ARCH_EBSA110 && !4xx && !8xx && !SPARC && !M68K && !PARISC && !FRV && !ARCH_VERSATILE && !VGA_NOPROBE
default y
help
Saying Y here will allow you to use Linux in text mode through a
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]