Hi,
Just got a kernel panic, it tried to print something:
BUG: unable to handle kernel paging request at virtual address d47ddc68
eip = c010b247
*pde = 0
(repeated throughout the screen)
It's a laptop - mobile Celeron Coppermine 600 MHz, 128 MB RAM, i440BX
- Fujitsu-Siemens Liteline Plus 419A (LF6).
The kernel is 2.6.17.3 + Alan's IDE patch, standard config.
Restarted the machine and it seems it's do_page_fault:
c010ae3d T do_page_fault
c010b368 t .text.lock.fault
Not sure if the following means anything:
.L138:
.loc 1 551 0
movl 8(%esp), %edx
movl %ebx, 496(%edx) <<<<<<<<<<<<<<<< faults here
.loc 1 552 0
movl $14, 500(%edx)
.loc 1 553 0
movl (%esp), %eax
movl %eax, 504(%edx)
.loc 1 554 0
movl %eax, %ecx
movl $.LC12, %eax
movl 4(%esp), %edx
.LCFI53:
call die
arch/i386/mm.c:
/*
* Oops. The kernel tried to access some bad page. We'll have to
* terminate things with extreme prejudice.
*/
...
tsk->thread.cr2 = address; <<<<<<<<<<<<<<<< left side faults here
tsk->thread.trap_no = 14;
tsk->thread.error_code = error_code;
die("Oops", regs, error_code);
bust_spinlocks(0);
do_exit(SIGKILL);
This machine has a history of mysterious hard freezes since ca 2.6.0
(black screen of death, I think there were no such problems with 2.4).
The CPU lacks LAPIC. It could be hardware, but I've never spotted any
specific problem, memtest86 doesn't show anything either.
While this time the machine was almost (but not completely) idle,
the hard freezes seems to occur mostly with simultaneous disk and LAN
activity (Ethernet is Tulip 21143 32-bit PC Card, by DLink, the disk
is IBM/Hitachi IC25N020ATMR04-0 Rev: MO1O).
$ cat /proc/iomem
00000000-0009f7ff : System RAM
0009f800-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000cbfff : Video ROM
000f0000-000fffff : System ROM
00100000-07feffff : System RAM
00100000-002a889a : Kernel code
002a889b-00349233 : Kernel data
07ff0000-07fffbff : ACPI Tables
07fffc00-07ffffff : ACPI Non-volatile Storage
10000000-11ffffff : PCI CardBus #02
10000000-1003ffff : 0000:02:00.0
12000000-13ffffff : PCI CardBus #02
12000000-120003ff : 0000:02:00.0
12000000-120003ff : tulip
14000000-15ffffff : PCI CardBus #06
16000000-17ffffff : PCI CardBus #06
18000000-18000fff : 0000:00:0a.0
18000000-18000fff : yenta_socket
18001000-18001fff : 0000:00:0a.1
18001000-18001fff : yenta_socket
f4000000-f7ffffff : 0000:00:00.0
f8000000-fbffffff : PCI Bus #01
f8000000-fbffffff : 0000:01:00.0
fedfe000-fedfffff : 0000:00:0d.0
fedfe000-fedfffff : Maestro3
fffeac00-ffffffff : reserved
What could it be?
How could I debug it?
--
Krzysztof Halasa
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
