Re: SCSI device order changed

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



>
>Hard disks are sda thru sdd, the devices start at sde. That is, up until I
>booted 2.6.17 _with_ the external devices attached. The kernel swapped
>the order of the cards: devices start at sda, and the disks come after,
>which means it can't find / on sda.
>
>I found a related post here: http://lkml.org/lkml/2005/12/3/192
>which suggests this situation arose around 2.6.15. It also says ordering
>can't be guaranteed. If that's the final verdict, I'll simply swap the
>cards on the PCI bus and be done with it.
>
And then, hope it does not change again?

It usually depends on link time order (when compiled in) or module load 
order (with initrd), both of which, esp. the latter, can be fine-tuned to 
the user's needs.

Also note CONFIG_BLK_DEV_OFFBOARD.



Jan Engelhardt
-- 
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux