Problem solved!
On Sat, Jul 15, 2006 at 07:45:57PM +0200, Carsten Otto wrote:
> In the problem case the IO wait never drops below 40% no matter how light
> the HDD load is. Logging in into the system via SSH then takes more than
> two minutes and other tasks are equally slow.
Okay, the wait percentage is no problem, but the speed is.
I had to use a second power supply for two of the four SATA disks,
because the main supply is not good enough and causes crashes and
reboots (see my other threads, I will answer there too).
In a test that checked each disk seperately I noticed that exactly those
disks connected to the second power supply perform very poor with write
accesses (65 MB/sec vs. 2 MB/sec). I replaced the second (bad) power
supply with a very good one and now all disks are working fine. My new
main power supply should arrive soon.
I still can't understand why disks work slower when provided with
"wrong" power... The disks are Maxtor MaXLine III 7V300F0.
> There might be a problem with my hardware (in a not yet determined
> device) causing this problem. But as long as I do not know what is wrong
> I still see the chance of a software error in the kernel.
Yeah, the kernel is okay :)
PS: Now a very annoying hunt for some error in my computer ends after
about three weeks. The system now is stable and fast and I am happy...
Bye and sorry for bugging you,
--
Carsten Otto
[email protected]
www.c-otto.de
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
