raid io requests not parallel?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



I'm using kernel linux-2.6.15-gentoo-r1, and I noticed performance of
the software RAID-1 is not as good as I would have expected on my two
SATA drives, and I was wondering if anyone has an idea what may be
happening. The test I run is 1024 16k direct-IO reads/writes from
random locations within a 1GB file (on a RAID-1 partition), with my
disk caches set to
write-through mode. In the MT (multi-threaded) case, I issue them from
8 threads (so it's 128 requests per thread):

Random read: 10.295 sec
Random write: 19.142 sec
MT Random read: 5.276 sec
MT Random write: 19.839 sec

As expected, the multi-threaded reads are 2x as fast as single-threaded
reads. But I would have expected (assuming the write to both disks can
occur in parallel) that the random writes are about the same speed (10
seconds) as the single-threaded random reads, for both the
single-threaded and multi-threaded write cases. The fact that the
multi-threaded reads were
twice as fast indicates to me that read requests can occur in parallel.

So.... why doesn't the raid issue the writes in parallel? Thanks in
advance for any help.

Jon.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux