Re: [PATCH] Add SATA device to VIA IRQ quirk fixup list

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 2006-07-14 at 17:24 +0100, Daniel Drake wrote:
> Daniel Drake wrote:
> > It is worth noting that on the Gentoo bug report, the user could not 
> > boot from VIA SATA while that ID was not in the list. However, if the 
> > ACPI was *disabled* then the system booted fine (even without the SATA 
> > ID in the list, i.e. no quirk applied).
> > 
> > This suggests that the quirk is only needed for ACPI users, at least on 
> > that system.
> 
> I just confirmed this on my own system, at least partially. I removed 
> the quirk and the system booted fine.
> 
> This is with ACPI enabled, but APIC not enabled (hence the interrupts 
> are XT-PIC). I cannot enable APIC on this system due to buggy BIOS.
> 
> Daniel

Daniel, VIA_SATA is not in the list , so when you write remove , you
remove what ? or you want say the opposite ?  
Please rephrase your sentence .

Do you need quirk SATA with acpi=off  ?

Do you need quirk with ACPI enabled ? 

Sérgio M. B. 

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux