On Wed, Jul 12, 2006 at 12:57:14PM -0500, John Keller wrote:
> sgiioc4.c had been recently converted to using mmio ops.
> There are still a few issues to cleanup.
>
> Signed-off-by: [email protected]
Signed-off-by: [email protected]
>
> --- linux-2.6.orig/drivers/ide/pci/sgiioc4.c 2006-07-11 11:34:42.135934603 -0500
> +++ linux-2.6/drivers/ide/pci/sgiioc4.c 2006-07-12 09:17:02.316590824 -0500
> @@ -372,7 +372,7 @@ ide_dma_sgiioc4(ide_hwif_t * hwif, unsig
> printk(KERN_INFO "%s: BM-DMA at 0x%04lx-0x%04lx\n", hwif->name,
> dma_base, dma_base + num_ports - 1);
>
> - if (!request_region(dma_base, num_ports, hwif->name)) {
> + if (!request_mem_region(dma_base, num_ports, hwif->name)) {
> printk(KERN_ERR
> "%s(%s) -- ERROR, Addresses 0x%p to 0x%p "
> "ALREADY in use\n",
> @@ -381,7 +381,7 @@ ide_dma_sgiioc4(ide_hwif_t * hwif, unsig
> goto dma_alloc_failure;
> }
>
> - hwif->dma_base = dma_base;
> + hwif->dma_base = (unsigned long) ioremap(dma_base, num_ports);
> hwif->dmatable_cpu = pci_alloc_consistent(hwif->pci_dev,
> IOC4_PRD_ENTRIES * IOC4_PRD_BYTES,
> &hwif->dmatable_dma);
> @@ -607,18 +607,14 @@ ide_init_sgiioc4(ide_hwif_t * hwif)
> hwif->ide_dma_lostirq = &sgiioc4_ide_dma_lostirq;
> hwif->ide_dma_timeout = &__ide_dma_timeout;
>
> - /*
> - * The IOC4 uses MMIO rather than Port IO.
> - * It also needs special workarounds for INB.
> - */
> - default_hwif_mmiops(hwif);
> hwif->INB = &sgiioc4_INB;
> }
>
> static int __devinit
> sgiioc4_ide_setup_pci_device(struct pci_dev *dev, ide_pci_device_t * d)
> {
> - unsigned long base, ctl, dma_base, irqport;
> + unsigned long ctl, dma_base, irqport;
> + unsigned long bar0, cmd_base, cmd_phys_base, virt_base;
> ide_hwif_t *hwif;
> int h;
>
> @@ -636,23 +632,27 @@ sgiioc4_ide_setup_pci_device(struct pci_
> }
>
> /* Get the CmdBlk and CtrlBlk Base Registers */
> - base = pci_resource_start(dev, 0) + IOC4_CMD_OFFSET;
> - ctl = pci_resource_start(dev, 0) + IOC4_CTRL_OFFSET;
> - irqport = pci_resource_start(dev, 0) + IOC4_INTR_OFFSET;
> + bar0 = pci_resource_start(dev, 0);
> + virt_base = (unsigned long) ioremap(bar0, pci_resource_len(dev, 0));
> + cmd_base = virt_base + IOC4_CMD_OFFSET;
> + ctl = virt_base + IOC4_CTRL_OFFSET;
> + irqport = virt_base + IOC4_INTR_OFFSET;
> dma_base = pci_resource_start(dev, 0) + IOC4_DMA_OFFSET;
>
> - if (!request_region(base, IOC4_CMD_CTL_BLK_SIZE, hwif->name)) {
> + cmd_phys_base = bar0 + IOC4_CMD_OFFSET;
> + if (!request_mem_region(cmd_phys_base, IOC4_CMD_CTL_BLK_SIZE,
> + hwif->name)) {
> printk(KERN_ERR
> - "%s : %s -- ERROR, Port Addresses "
> + "%s : %s -- ERROR, Addresses "
> "0x%p to 0x%p ALREADY in use\n",
> - __FUNCTION__, hwif->name, (void *) base,
> - (void *) base + IOC4_CMD_CTL_BLK_SIZE);
> + __FUNCTION__, hwif->name, (void *) cmd_phys_base,
> + (void *) cmd_phys_base + IOC4_CMD_CTL_BLK_SIZE);
> return -ENOMEM;
> }
>
> - if (hwif->io_ports[IDE_DATA_OFFSET] != base) {
> + if (hwif->io_ports[IDE_DATA_OFFSET] != cmd_base) {
> /* Initialize the IO registers */
> - sgiioc4_init_hwif_ports(&hwif->hw, base, ctl, irqport);
> + sgiioc4_init_hwif_ports(&hwif->hw, cmd_base, ctl, irqport);
> memcpy(hwif->io_ports, hwif->hw.io_ports,
> sizeof (hwif->io_ports));
> hwif->noprobe = !hwif->io_ports[IDE_DATA_OFFSET];
> @@ -665,6 +665,9 @@ sgiioc4_ide_setup_pci_device(struct pci_
> hwif->cds = (struct ide_pci_device_s *) d;
> hwif->gendev.parent = &dev->dev;/* setup proper ancestral information */
>
> + /* The IOC4 uses MMIO rather than Port IO. */
> + default_hwif_mmiops(hwif);
> +
> /* Initializing chipset IRQ Registers */
> hwif->OUTL(0x03, irqport + IOC4_INTR_SET * 4);
>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]