Re: [PATCH 6/6] PCI-Express AER implemetation

["Zhang, Yanmin" <yanmin_zhang@linux.intel.com>]

From: Zhang, Yanmin <yanmin.zhang@intel.com>

Patch 6 implements aerdrv port service driver.

When a root port service device is probed, the aerdrv will call
request_irq to register irq handler for AER error interrupt.

When a device sends an PCI-Express error message to the root port,
the root port will trigger an interrupt, by either MSI or IO-APIC,
then kernel would run the irq handler. The handler collects root
error status register and schedules a work. The work will call
the core part of patch 5 to process the error.

aerdrv port service driver also provides error handlers for itself.

Signed-off-by: Zhang Yanmin <yanmin.zhang@intel.com>

---

--- linux-2.6.17/drivers/pci/pcie/aer/aerdrv.c	1970-01-01 08:00:00.000000000 +0800
+++ linux-2.6.17_aer/drivers/pci/pcie/aer/aerdrv.c	2006-06-22 16:46:29.000000000 +0800
@@ -0,0 +1,342 @@
+/*
+ * Copyright (C) 2006 Intel
+ *	Tom Long Nguyen (tom.l.nguyen@intel.com)
+ *	Zhang Yanmin (yanmin.zhang@intel.com)
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/pm.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/pcieport_if.h>
+
+#include "aerdrv.h"
+
+/*
+ * Version Information
+ */
+#define DRIVER_VERSION "v1.0"
+#define DRIVER_AUTHOR "tom.l.nguyen@intel.com"
+#define DRIVER_DESC "Root Port Advanced Error Reporting Driver"
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+static int __devinit aer_probe (struct pcie_device *dev,
+	const struct pcie_port_service_id *id );
+static void aer_remove(struct pcie_device *dev);
+static int aer_suspend(struct pcie_device *dev, pm_message_t state)
+{return 0;}
+static int aer_resume(struct pcie_device *dev) {return 0;}
+static pci_ers_result_t aer_error_detected(struct pci_dev *dev,
+	enum pci_channel_state error);
+static void aer_error_resume(struct pci_dev *dev);
+static pci_ers_result_t aer_root_reset(struct pci_dev *dev);
+
+/*
+ * PCI Express bus's AER Root service driver data structure
+ */
+static struct pcie_port_service_id aer_id[] = {
+	{
+	.vendor 	= PCI_ANY_ID, 
+	.device 	= PCI_ANY_ID,
+	.port_type 	= PCIE_RC_PORT, 
+	.service_type 	= PCIE_PORT_SERVICE_AER,
+	},
+	{ /* end: all zeroes */ }
+};
+
+static struct pci_error_handlers aer_error_handlers = {
+	.error_detected = aer_error_detected,
+	.resume = aer_error_resume,
+};
+
+static struct pcie_port_service_driver aerdrv = {
+	.name		= "aer",
+	.id_table	= &aer_id[0],
+
+	.probe		= aer_probe,
+	.remove		= aer_remove,
+
+	.suspend	= aer_suspend,
+	.resume		= aer_resume,
+
+	.err_handler	= &aer_error_handlers,
+
+	.reset_link	= aer_root_reset,
+};
+
+/**
+ * aer_irq - Root Port's ISR
+ * @irq: IRQ assigned to Root Port
+ * @context: pointer to Root Port data structure
+ * @r: pointer struct pt_regs
+ *
+ * Invoked when Root Port detects AER messages.
+ **/
+static irqreturn_t aer_irq(int irq, void *context, struct pt_regs * r)
+{
+	unsigned int status, id;
+	struct pcie_device *pdev = (struct pcie_device *)context;
+	struct aer_rpc *rpc = get_service_data(pdev);
+	int next_prod_idx;
+	unsigned long flags;
+	int pos;
+
+	pos = pci_find_aer_capability(pdev->port);
+	/* 
+	 * Must lock access to Root Error Status Reg, Root Error ID Reg, 
+	 * and Root error producer/consumer index 
+	 */
+	spin_lock_irqsave(&rpc->e_lock, flags);
+
+	/* Read error status */
+	pci_read_config_dword(pdev->port, pos + PCI_ERR_ROOT_STATUS, &status);
+	if (!(status & ROOT_ERR_STATUS_MASKS)) {
+		spin_unlock_irqrestore(&rpc->e_lock, flags);
+		return IRQ_NONE;
+	}
+
+	/* Read error source and clear error status */
+	pci_read_config_dword(pdev->port, pos + PCI_ERR_ROOT_COR_SRC, &id);
+	pci_write_config_dword(pdev->port, pos + PCI_ERR_ROOT_STATUS, status);
+
+	/* Store error source for later DPC handler */
+	next_prod_idx = rpc->prod_idx + 1;
+	if (next_prod_idx == AER_ERROR_SOURCES_MAX)
+		next_prod_idx = 0;
+	if (next_prod_idx == rpc->cons_idx) {
+		/* 
+		 * Error Storm Condition - possibly the same error occurred.
+		 * Drop the error.
+		 */
+		spin_unlock_irqrestore(&rpc->e_lock, flags);
+		return IRQ_HANDLED;
+	}
+	rpc->e_sources[rpc->prod_idx].status =  status;
+	rpc->e_sources[rpc->prod_idx].id = id;
+	rpc->prod_idx = next_prod_idx;
+	spin_unlock_irqrestore(&rpc->e_lock, flags);
+
+	/*  Invoke DPC handler */
+	schedule_work(&rpc->dpc_handler);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * aer_alloc_rpc - allocate Root Port data structure
+ * @dev: pointer to the pcie_dev data structure
+ *
+ * Invoked when Root Port's AER service is loaded.
+ **/
+static struct aer_rpc* aer_alloc_rpc(struct pcie_device *dev)
+{
+	struct aer_rpc *rpc;
+
+	if (!(rpc = (struct aer_rpc *)kmalloc(sizeof(struct aer_rpc), 
+		GFP_KERNEL)))
+		return NULL;
+
+	memset(rpc, 0, sizeof(struct aer_rpc));
+	/* 
+	 * Initialize Root lock access, e_lock, to Root Error Status Reg, 
+	 * Root Error ID Reg, and Root error producer/consumer index. 
+	 */
+	rpc->e_lock = SPIN_LOCK_UNLOCKED;
+
+	/* 
+	 * Initialize semaphore access required to access, add, remove,
+	 * or print AER aware devices in this RPC hierarchy 
+	 */
+	sema_init(&rpc->rpc_sema, 1);
+
+	INIT_LIST_HEAD(&rpc->node);
+	INIT_LIST_HEAD(&rpc->children);
+	rpc->rpd = dev;
+	INIT_WORK(&rpc->dpc_handler, aer_isr, (void *)dev);
+	rpc->prod_idx = rpc->cons_idx = 0;
+
+	/* Use PCIE bus function to store rpc into PCIE device */
+	set_service_data(dev, rpc);
+
+	return rpc;
+}
+
+/**
+ * aer_remove - clean up resources
+ * @dev: pointer to the pcie_dev data structure
+ *
+ * Invoked when PCI Express bus unloads or AER probe fails.
+ **/
+static void aer_remove(struct pcie_device *dev)
+{
+	struct aer_rpc *rpc = get_service_data(dev);
+
+	if (rpc) {
+		/* If register interrupt service, it must be free. */
+		if (rpc->isr)
+			free_irq(dev->irq, dev);
+
+		/* Delete this node from a RC hierarchy */
+		aer_delete_rootport(rpc);
+		set_service_data(dev, NULL);
+	}
+}
+
+/**
+ * aer_probe - initialize resources
+ * @dev: pointer to the pcie_dev data structure
+ * @id: pointer to the service id data structure
+ *
+ * Invoked when PCI Express bus loads AER service driver.
+ **/
+static int __devinit aer_probe (struct pcie_device *dev, 
+				const struct pcie_port_service_id *id )
+{
+	int status;
+	struct aer_rpc *rpc;
+	struct device *device = &dev->device;
+
+	/* Init */
+	if ((status = aer_init(dev)))
+		return status;
+
+	/* Alloc rpc data structure */
+	if (!(rpc = aer_alloc_rpc(dev))) {
+		printk(KERN_DEBUG "%s: Alloc rpc fails on PCIE device[%s]\n",
+			__FUNCTION__, device->bus_id);
+		aer_remove(dev);
+		return -ENOMEM;
+	}
+
+	/* Request IRQ ISR */
+	if ((status = request_irq(dev->irq, aer_irq, SA_SHIRQ, "aerdrv", 
+				dev))) {
+		printk(KERN_DEBUG "%s: Request ISR fails on PCIE device[%s]\n", 
+			__FUNCTION__, device->bus_id);
+		aer_remove(dev);
+		return status;
+	}
+
+	rpc->isr = 1;
+
+	/* Add rpc into a RC hierarchy */
+	aer_add_rootport(rpc);
+
+	return status;
+}
+
+/**
+ * aer_root_reset - reset link on Root Port
+ * @dev: pointer to Root Port's pci_dev data structure
+ *
+ * Invoked by Port Bus driver when performing link reset at Root Port.
+ **/
+static pci_ers_result_t aer_root_reset(struct pci_dev *dev)
+{
+	u16 p2p_ctrl;
+	u32 status;
+	int pos;
+
+	pos = pci_find_aer_capability(dev);
+
+	/* Disable Root's interrupt in response to error messages */ 
+	pci_write_config_dword(dev, pos + PCI_ERR_ROOT_COMMAND, 0);
+
+	/* Assert Secondary Bus Reset */
+	pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &p2p_ctrl);
+	p2p_ctrl |= PCI_CB_BRIDGE_CTL_CB_RESET;
+	pci_write_config_word(dev, PCI_BRIDGE_CONTROL, p2p_ctrl);
+
+	/* De-assert Secondary Bus Reset */
+	p2p_ctrl &= ~PCI_CB_BRIDGE_CTL_CB_RESET;
+	pci_write_config_word(dev, PCI_BRIDGE_CONTROL, p2p_ctrl);
+
+	/* 
+	 * System software must wait for at least 100ms from the end 
+	 * of a reset of one or more device before it is permitted
+	 * to issue Configuration Requests to those devices.
+	 */
+	msleep(200);
+	printk(KERN_DEBUG "Complete link reset at Root[%s]\n", dev->dev.bus_id);
+
+	/* Enable Root Port's interrupt in response to error messages */ 
+	pci_read_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, &status);
+	pci_write_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, status);
+	pci_write_config_dword(dev,
+		pos + PCI_ERR_ROOT_COMMAND,
+		ROOT_PORT_INTR_ON_MESG_MASK);
+
+	return PCI_ERS_RESULT_RECOVERED;
+}
+
+/**
+ * aer_error_detected - update severity status
+ * @dev: pointer to Root Port's pci_dev data structure
+ * @error: error severity being notified by port bus
+ *
+ * Invoked by Port Bus driver during error recovery.
+ **/
+static pci_ers_result_t aer_error_detected(struct pci_dev *dev,
+			enum pci_channel_state error)
+{
+	/* Root Port has no impact. Always recovers. */
+	return PCI_ERS_RESULT_CAN_RECOVER;
+}
+
+/**
+ * aer_error_resume - clean up corresponding error status bits
+ * @dev: pointer to Root Port's pci_dev data structure
+ *
+ * Invoked by Port Bus driver during nonfatal recovery.
+ **/
+static void aer_error_resume(struct pci_dev *dev)
+{
+	int pos;
+	u32 status, mask;
+	u16 reg16;
+
+	/* Clean up Root device status */
+	pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
+	pci_read_config_word(dev, pos + PCI_EXP_DEVSTA, &reg16);
+	pci_write_config_word(dev, pos + PCI_EXP_DEVSTA, reg16);
+
+	/* Clean AER Root Error Status */
+	pos = pci_find_aer_capability(dev);
+	pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, &status);
+	pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_SEVER, &mask);
+	if (dev->error_state == pci_channel_io_normal)
+		status &= ~mask; /* Clear corresponding nonfatal bits */
+	else
+		status &= mask; /* Clear corresponding fatal bits */
+	pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, status);
+}
+
+/**
+ * aer_service_init - register AER root service driver
+ *
+ * Invoked when AER root service driver is loaded.
+ **/
+static int __init aer_service_init(void)
+{
+	return pcie_port_service_register(&aerdrv);
+}
+
+/**
+ * aer_service_exit - unregister AER root service driver
+ *
+ * Invoked when AER root service driver is unloaded.
+ **/
+static void __exit aer_service_exit(void) 
+{
+	pcie_port_service_unregister(&aerdrv);
+}
+
+module_init(aer_service_init);
+module_exit(aer_service_exit);
--- linux-2.6.17/drivers/pci/pcie/aer/Kconfig	1970-01-01 08:00:00.000000000 +0800
+++ linux-2.6.17_aer/drivers/pci/pcie/aer/Kconfig	2006-06-22 16:46:29.000000000 +0800
@@ -0,0 +1,12 @@
+#
+# Root Port Device AER Configuration
+#
+
+config PCIEAER
+	tristate "Root Port Advanced Error Reporting support"
+	depends on PCIEPORTBUS 
+	default y
+	help
+	  This enables Root Port Advanced Error Reporting (AER) driver
+	  support. Error reporting messages sent to Root Port will be
+	  handled by PCI Express AER driver.
--- linux-2.6.17/drivers/pci/pcie/aer/Makefile	1970-01-01 08:00:00.000000000 +0800
+++ linux-2.6.17_aer/drivers/pci/pcie/aer/Makefile	2006-06-22 16:46:29.000000000 +0800
@@ -0,0 +1,10 @@
+#
+# Makefile for PCI-Express Root Port Advanced Error Reporting Driver
+#
+
+obj-$(CONFIG_PCIEAER)		+= aerdriver.o
+aerdrv_acpi-$(CONFIG_ACPI)	+= aerdrv_acpi.o
+
+aerdriver-objs		:= aerdrv_errprint.o aerdrv_core.o aerdrv.o
+aerdriver-objs		+= $(aerdrv_acpi-y)
+
--- linux-2.6.17/drivers/pci/pcie/Kconfig	2006-06-22 16:26:43.000000000 +0800
+++ linux-2.6.17_aer/drivers/pci/pcie/Kconfig	2006-06-22 16:46:29.000000000 +0800
@@ -34,3 +34,4 @@ config HOTPLUG_PCI_PCIE_POLL_EVENT_MODE
 	   
 	  When in doubt, say N.
 
+source "drivers/pci/pcie/aer/Kconfig"
--- linux-2.6.17/drivers/pci/pcie/Makefile	2006-06-22 16:26:43.000000000 +0800
+++ linux-2.6.17_aer/drivers/pci/pcie/Makefile	2006-06-22 16:46:29.000000000 +0800
@@ -5,3 +5,6 @@
 pcieportdrv-y			:= portdrv_core.o portdrv_pci.o portdrv_bus.o
 
 obj-$(CONFIG_PCIEPORTBUS)	+= pcieportdrv.o
+
+# Build PCI Express AER if needed
+obj-$(CONFIG_PCIEAER)		+= aer/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/