2.6.18-rc1 fails to boot on Ultra 5

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



2.6.17-git7 was the last development kernel to boot on my U5.
2.6.17-git8 to -git15 all hang immediately after being loaded.
2.6.17-git16 to 2.6.18-rc1 partially boot but crash and burn in
different places depending on kernel configuration: my standard
config got alignment exceptions in the floppy driver followed by
(sabre?) PCI errors and a hang; a minimal kernel gets further but
fails "su" probe and then oopses hard when the /dev/hda partition
table is about to be printed.

I'll try to capture the kernel messages soon, but I don't have
a null-modem serial cable to the U5 yet, and my attempts to use
a digital camera only resulted in blurry pictures of the screen :-(

/Mikael
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux