This is an example for using firmware version detection in the bcm43xx
driver. It's not a complete list of firmware blobs. More than 50 entries
are still missing in the tables, but it should be enough to get an
impresion of the idea.
--- ../linux-2.6.18rc1/drivers/net/wireless/bcm43xx/bcm43xx_main.c 2006-07-07 13:41:10.000000000 +0200
+++ drivers/net/wireless/bcm43xx/bcm43xx_main.c 2006-07-08 13:30:30.000000000 +0200
@@ -150,6 +150,22 @@
};
MODULE_DEVICE_TABLE(pci, bcm43xx_pci_tbl);
+static struct firmware_files ucode_version_tbl[] = {
+ { { 0xed, 0x55, 0x26, 0xf9, 0x2e, 0xcb, 0x8f, 0x76, 0x90, 0x34, 0xa0,
+ 0xf1, 0x67, 0x33, 0x00, 0x5f }, BCM43xx_FW_VER(3, 130, 20, 0) },
+ { { 0x65, 0x1e, 0x4f, 0xc1, 0x92, 0xb6, 0xae, 0x16, 0xb2, 0xf6, 0x39,
+ 0x56, 0xc5, 0x66, 0x8d, 0xbd }, BCM43xx_FW_VER(4, 10, 40, 0) },
+ {},
+};
+
+static struct firmware_files pcm_version_tbl[] = {
+ { { 0x2d, 0x0f, 0xd4, 0x02, 0x88, 0x9d, 0xf1, 0xd1, 0xf6, 0xb3, 0xdd,
+ 0x8b, 0x4d, 0x37, 0xcc, 0x9a }, BCM43xx_FW_VER(3, 30, 15, 0) },
+ { { 0xff, 0x29, 0xcd, 0x07, 0x56, 0x75, 0xa5, 0x44, 0xbd, 0xc5, 0xd5,
+ 0xae, 0x95, 0x3d, 0x96, 0x4a }, BCM43xx_FW_VER(3, 90, 7, 0) },
+ {},
+};
+
static void bcm43xx_ram_write(struct bcm43xx_private *bcm, u16 offset, u32 val)
{
u32 status;
@@ -1946,6 +1962,7 @@
{
struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm);
u8 rev = bcm->current_core->rev;
+ u32 ver;
int err = 0;
int nr;
char buf[22 + sizeof(modparam_fwpostfix) - 1] = { 0 };
@@ -1961,6 +1978,14 @@
buf);
goto error;
}
+
+ ver = firmware_version(bcm->ucode, ucode_version_tbl);
+ if (ver != 0) {
+ printk(KERN_INFO PFX "FW: %s version %i.%i.%i.%i\n",
+ buf, BCM43xx_PRINT_FW_VER(ver));
+ } else
+ printk(KERN_INFO PFX "FW: %s detection failure.\n",
+ buf);
}
if (!bcm->pcm) {
@@ -1975,6 +2000,14 @@
buf);
goto error;
}
+
+ ver = firmware_version(bcm->pcm, pcm_version_tbl);
+ if (ver != 0) {
+ printk(KERN_INFO PFX "FW: %s version %i.%i.%i.%i\n",
+ buf, BCM43xx_PRINT_FW_VER(ver));
+ } else
+ printk(KERN_INFO PFX "FW: %s detection failure.\n",
+ buf);
}
if (!bcm->initvals0) {
--- ../linux-2.6.18rc1/drivers/net/wireless/bcm43xx/bcm43xx.h 2006-07-07 13:41:10.000000000 +0200
+++ drivers/net/wireless/bcm43xx/bcm43xx.h 2006-07-08 13:30:45.000000000 +0200
@@ -973,4 +973,8 @@
((u8*)(x))[2], ((u8*)(x))[3], \
((u8*)(x))[4], ((u8*)(x))[5]
+/** Helpers to encode/decode firmware version */
+#define BCM43xx_FW_VER(a, b, c, d) (((a)<<24) | ((b)<<16) | ((c)<<8) | (d))
+#define BCM43xx_PRINT_FW_VER(u) (u>>24), (u>>16)&0xff, (u>>8)&0xff, (u)&0xff
+
#endif /* BCM43xx_H_ */
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
