In an effort to avoid the typo patch spam, here's a larger patch to cover many Kconfigs in /drivers.
This does not include any of the previously posted patches.
--
Matt LaPlante
CCNP, CCDP, A+, Linux+, CQS
[email protected]
--
diff -ru a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
--- a/drivers/firmware/Kconfig 2006-07-04 21:38:30.000000000 -0400
+++ b/drivers/firmware/Kconfig 2006-07-04 21:42:17.000000000 -0400
@@ -64,7 +64,7 @@
help
Say m if you want to have the option of updating the BIOS for your
DELL system. Note you need a Dell OpenManage or Dell Update package (DUP)
- supporting application to comunicate with the BIOS regarding the new
+ supporting application to communicate with the BIOS regarding the new
image for the image update to take effect.
See <file:Documentation/dell_rbu.txt> for more details on the driver.
diff -ru a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
--- a/drivers/i2c/busses/Kconfig 2006-07-04 21:38:30.000000000 -0400
+++ b/drivers/i2c/busses/Kconfig 2006-07-04 21:47:50.000000000 -0400
@@ -323,10 +323,10 @@
This driver is a light version of i2c-parport. It doesn't depend
on the parport driver, and uses direct I/O access instead. This
- might be prefered on embedded systems where wasting memory for
+ might be preferred on embedded systems where wasting memory for
the clean but heavy parport handling is not an option. The
drawback is a reduced portability and the impossibility to
- dasiy-chain other parallel port devices.
+ daisy-chain other parallel port devices.
Don't say Y here if you said Y or M to i2c-parport. Saying M to
both is possible but both modules should not be loaded at the same
diff -ru a/drivers/ieee1394/Kconfig b/drivers/ieee1394/Kconfig
--- a/drivers/ieee1394/Kconfig 2006-07-04 21:38:30.000000000 -0400
+++ b/drivers/ieee1394/Kconfig 2006-07-04 21:54:25.000000000 -0400
@@ -133,7 +133,7 @@
help
This builds sbp2 for use with non-OHCI host adapters which do not
support physical DMA or for when ohci1394 is run with phys_dma=0.
- Physical DMA is data movement without assistence of the drivers'
+ Physical DMA is data movement without assistance of the drivers'
interrupt handlers. This option includes the interrupt handlers
that are required in absence of this hardware feature.
diff -ru a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
--- a/drivers/input/keyboard/Kconfig 2006-06-17 21:49:35.000000000 -0400
+++ b/drivers/input/keyboard/Kconfig 2006-07-04 21:58:52.000000000 -0400
@@ -166,7 +166,7 @@
However, it has been thoroughly tested and is stable.
If you want full HIL support including support for multiple
- keyboards, mices and tablets, you have to enable the
+ keyboards, mice, and tablets, you have to enable the
"HP System Device Controller i8042 Support" in the input/serio
submenu.
diff -ru a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig
--- a/drivers/input/serio/Kconfig 2006-06-17 21:49:35.000000000 -0400
+++ b/drivers/input/serio/Kconfig 2006-07-04 22:21:43.000000000 -0400
@@ -115,9 +115,9 @@
depends on GSC && SERIO
default y
---help---
- This option enables supports for the the "System Device
+ This option enables support for the "System Device
Controller", an i8042 carrying microcode to manage a
- few miscellanous devices on some Hewlett Packard systems.
+ few miscellaneous devices on some Hewlett Packard systems.
The SDC itself contains a 10ms resolution timer/clock capable
of delivering interrupts on a periodic and one-shot basis.
The SDC may also be connected to a battery-backed real-time
diff -ru a/drivers/isdn/hardware/eicon/Kconfig b/drivers/isdn/hardware/eicon/Kconfig
--- a/drivers/isdn/hardware/eicon/Kconfig 2006-06-17 21:49:35.000000000 -0400
+++ b/drivers/isdn/hardware/eicon/Kconfig 2006-07-04 22:03:09.000000000 -0400
@@ -47,7 +47,7 @@
tristate "DIVA Maint driver support"
depends on ISDN_DIVAS && m
help
- Enable Divas Maintainance driver.
+ Enable Divas Maintenance driver.
endmenu
diff -ru a/drivers/isdn/hisax/Kconfig b/drivers/isdn/hisax/Kconfig
--- a/drivers/isdn/hisax/Kconfig 2006-06-17 21:49:35.000000000 -0400
+++ b/drivers/isdn/hisax/Kconfig 2006-07-04 22:04:55.000000000 -0400
@@ -321,7 +321,7 @@
help
This enables HiSax support for the HFC-S PCI 2BDS0 based cards.
- For more informations see under
+ For more information see under
<file:Documentation/isdn/README.hfc-pci>.
config HISAX_W6692
diff -ru a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig
--- a/drivers/macintosh/Kconfig 2006-07-04 21:38:31.000000000 -0400
+++ b/drivers/macintosh/Kconfig 2006-07-04 22:07:34.000000000 -0400
@@ -176,7 +176,7 @@
depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64
help
This driver provides some thermostat and fan control for the
- iBook G4, and the ATI based aluminium PowerBooks, allowing slighlty
+ iBook G4, and the ATI based aluminium PowerBooks, allowing slightly
better fan behaviour by default, and some manual control.
config THERM_PM72
diff -ru a/drivers/media/dvb/cinergyT2/Kconfig b/drivers/media/dvb/cinergyT2/Kconfig
--- a/drivers/media/dvb/cinergyT2/Kconfig 2006-07-04 21:38:31.000000000 -0400
+++ b/drivers/media/dvb/cinergyT2/Kconfig 2006-07-04 22:11:12.000000000 -0400
@@ -56,7 +56,7 @@
measurements.
Please keep in mind that these updates cause traffic on the tuner
- control bus and thus may or may not affect receiption sensitivity.
+ control bus and thus may or may not affect reception sensitivity.
The default value should be a safe choice for common applications.
diff -ru a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
--- a/drivers/media/video/Kconfig 2006-07-04 21:38:31.000000000 -0400
+++ b/drivers/media/video/Kconfig 2006-07-04 22:16:52.000000000 -0400
@@ -37,7 +37,7 @@
help
Support for Radio Data System (RDS) decoder. This allows seeing
radio station identification transmitted using this standard.
- Currentlly, it works only with bt8x8 chips.
+ Currently, it works only with bt8x8 chips.
To compile this driver as a module, choose M here: the
module will be called saa6588.
diff -ru a/drivers/mtd/chips/Kconfig b/drivers/mtd/chips/Kconfig
--- a/drivers/mtd/chips/Kconfig 2006-07-04 21:38:32.000000000 -0400
+++ b/drivers/mtd/chips/Kconfig 2006-07-05 00:43:34.000000000 -0400
@@ -270,7 +270,7 @@
tristate "JEDEC device support"
depends on MTD && MTD_OBSOLETE_CHIPS && BROKEN
help
- Enable older older JEDEC flash interface devices for self
+ Enable older JEDEC flash interface devices for self
programming flash. It is commonly used in older AMD chips. It is
only called JEDEC because the JEDEC association
<http://www.jedec.org/> distributes the identification codes for the
diff -ru a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
--- a/drivers/mtd/nand/Kconfig 2006-07-04 21:38:32.000000000 -0400
+++ b/drivers/mtd/nand/Kconfig 2006-07-05 00:48:47.000000000 -0400
@@ -21,7 +21,7 @@
NAND flash device internally checks only bits transitioning
from 1 to 0. There is a rare possibility that even though the
device thinks the write was successful, a bit could have been
- flipped accidentaly due to device wear or something else.
+ flipped accidentally due to device wear or something else.
config MTD_NAND_ECC_SMC
bool "NAND ECC Smart Media byte order"
diff -ru a/drivers/mtd/onenand/Kconfig b/drivers/mtd/onenand/Kconfig
--- a/drivers/mtd/onenand/Kconfig 2006-07-04 21:38:32.000000000 -0400
+++ b/drivers/mtd/onenand/Kconfig 2006-07-05 00:49:14.000000000 -0400
@@ -21,7 +21,7 @@
OneNAND flash device internally checks only bits transitioning
from 1 to 0. There is a rare possibility that even though the
device thinks the write was successful, a bit could have been
- flipped accidentaly due to device wear or something else.
+ flipped accidentally due to device wear or something else.
config MTD_ONENAND_GENERIC
tristate "OneNAND Flash device via platform device driver"
diff -ru a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
--- a/drivers/net/wireless/Kconfig 2006-07-04 21:38:40.000000000 -0400
+++ b/drivers/net/wireless/Kconfig 2006-07-05 00:59:12.000000000 -0400
@@ -312,7 +312,7 @@
tristate "Hermes chipset 802.11b support (Orinoco/Prism2/Symbol)"
depends on NET_RADIO && (PPC_PMAC || PCI || PCMCIA)
---help---
- A driver for 802.11b wireless cards based based on the "Hermes" or
+ A driver for 802.11b wireless cards based on the "Hermes" or
Intersil HFA384x (Prism 2) MAC controller. This includes the vast
majority of the PCMCIA 802.11b cards (which are nearly all rebadges)
- except for the Cisco/Aironet cards. Cards supported include the
diff -ru a/drivers/rapidio/Kconfig b/drivers/rapidio/Kconfig
--- a/drivers/rapidio/Kconfig 2006-06-17 21:49:35.000000000 -0400
+++ b/drivers/rapidio/Kconfig 2006-07-05 13:56:15.000000000 -0400
@@ -15,4 +15,4 @@
default "30"
---help---
Amount of time a discovery node waits for a host to complete
- enumeration beforing giving up.
+ enumeration before giving up.
diff -ru a/drivers/scsi/aic7xxx/Kconfig.aic79xx b/drivers/scsi/aic7xxx/Kconfig.aic79xx
--- a/drivers/scsi/aic7xxx/Kconfig.aic79xx 2006-06-17 21:49:35.000000000 -0400
+++ b/drivers/scsi/aic7xxx/Kconfig.aic79xx 2006-07-05 14:00:10.000000000 -0400
@@ -22,12 +22,12 @@
to be used for any device. The aic7xxx driver will automatically
vary this number based on device behavior. For devices with a
fixed maximum, the driver will eventually lock to this maximum
- and display a console message inidicating this value.
+ and display a console message indicating this value.
Due to resource allocation issues in the Linux SCSI mid-layer, using
a high number of commands per device may result in memory allocation
failures when many devices are attached to the system. For this reason,
- the default is set to 32. Higher values may result in higer performance
+ the default is set to 32. Higher values may result in higher performance
on some devices. The upper bound is 253. 0 disables tagged queueing.
Per device tag depth can be controlled via the kernel command line
diff -ru a/drivers/scsi/aic7xxx/Kconfig.aic7xxx b/drivers/scsi/aic7xxx/Kconfig.aic7xxx
--- a/drivers/scsi/aic7xxx/Kconfig.aic7xxx 2006-06-17 21:49:35.000000000 -0400
+++ b/drivers/scsi/aic7xxx/Kconfig.aic7xxx 2006-07-05 14:00:40.000000000 -0400
@@ -27,12 +27,12 @@
to be used for any device. The aic7xxx driver will automatically
vary this number based on device behavior. For devices with a
fixed maximum, the driver will eventually lock to this maximum
- and display a console message inidicating this value.
+ and display a console message indicating this value.
Due to resource allocation issues in the Linux SCSI mid-layer, using
a high number of commands per device may result in memory allocation
failures when many devices are attached to the system. For this reason,
- the default is set to 32. Higher values may result in higer performance
+ the default is set to 32. Higher values may result in higher performance
on some devices. The upper bound is 253. 0 disables tagged queueing.
Per device tag depth can be controlled via the kernel command line
diff -ru a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
--- a/drivers/scsi/Kconfig 2006-07-04 21:38:40.000000000 -0400
+++ b/drivers/scsi/Kconfig 2006-07-05 14:05:30.000000000 -0400
@@ -33,10 +33,10 @@
default y
---help---
This option enables support for the various files in
- /proc/scsi. In Linux 2.6 this has been superceeded by
+ /proc/scsi. In Linux 2.6 this has been superseded by
files in sysfs but many legacy applications rely on this.
- If unusure say Y.
+ If unsure say Y.
comment "SCSI support type (disk, tape, CD-ROM)"
depends on SCSI
diff -ru a/drivers/serial/Kconfig b/drivers/serial/Kconfig
--- a/drivers/serial/Kconfig 2006-07-04 21:38:44.000000000 -0400
+++ b/drivers/serial/Kconfig 2006-07-05 14:08:49.000000000 -0400
@@ -121,7 +121,7 @@
default "4"
help
Set this to the maximum number of serial ports you want
- the kernel to register at boot time. This can be overriden
+ the kernel to register at boot time. This can be overridden
with the module parameter "nr_uarts", or boot-time parameter
8250.nr_uarts
@@ -205,7 +205,7 @@
depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
help
Say Y here if you have a Boca serial board. Please read the Boca
- mini-HOWTO, avaialble from <http://www.tldp.org/docs.html#howto>
+ mini-HOWTO, available from <http://www.tldp.org/docs.html#howto>
To compile this driver as a module, choose M here: the module
will be called 8250_boca.
@@ -662,7 +662,7 @@
depends on M68328 || M68EZ328 || M68VZ328
help
This driver supports the built-in serial port of the Motorola 68328
- (standard, EZ and VZ varities).
+ (standard, EZ and VZ varieties).
config SERIAL_68328_RTS_CTS
bool "Support RTS/CTS on 68328 serial port"
diff -ru a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
--- a/drivers/usb/gadget/Kconfig 2006-06-17 21:49:35.000000000 -0400
+++ b/drivers/usb/gadget/Kconfig 2006-07-05 14:10:49.000000000 -0400
@@ -26,7 +26,7 @@
you need a low level bus controller driver, and some software
talking to it. Peripheral controllers are often discrete silicon,
or are integrated with the CPU in a microcontroller. The more
- familiar host side controllers have names like like "EHCI", "OHCI",
+ familiar host side controllers have names like "EHCI", "OHCI",
or "UHCI", and are usually integrated into southbridges on PC
motherboards.
diff -ru a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig
--- a/drivers/usb/storage/Kconfig 2006-06-17 21:49:35.000000000 -0400
+++ b/drivers/usb/storage/Kconfig 2006-07-05 14:15:19.000000000 -0400
@@ -120,7 +120,7 @@
Say Y here to include additional code to support the Olympus MAUSB-10
and Fujifilm DPC-R1 USB Card reader/writer devices.
- These devices are based on the Alauda chip and support support both
+ These devices are based on the Alauda chip and support both
XD and SmartMedia cards.
config USB_STORAGE_ONETOUCH
diff -ru a/drivers/video/Kconfig b/drivers/video/Kconfig
--- a/drivers/video/Kconfig 2006-07-04 21:38:44.000000000 -0400
+++ b/drivers/video/Kconfig 2006-07-05 14:20:36.000000000 -0400
@@ -396,7 +396,7 @@
is based on the KS-108 lcd controller and is typically a matrix
of 2*n chips. This driver was tested with a 128x64 panel. This
driver supports it for use with x86 SBCs through a 16 bit GPIO
- interface (8 bit data, 8 bit control). If you anticpate using
+ interface (8 bit data, 8 bit control). If you anticipate using
this driver, say Y or M; otherwise say N. You must specify the
GPIO IO address to be used for setting control and data.
@@ -764,7 +764,7 @@
default n
help
Say Y here if you want the Riva driver to output all sorts
- of debugging informations to provide to the maintainer when
+ of debugging information to provide to the maintainer when
something goes wrong.
config FB_RIVA_BACKLIGHT
@@ -848,7 +848,7 @@
depends on FB_INTEL
---help---
Say Y here if you want the Intel driver to output all sorts
- of debugging informations to provide to the maintainer when
+ of debugging information to provide to the maintainer when
something goes wrong.
config FB_MATROX
@@ -1039,7 +1039,7 @@
default n
help
Say Y here if you want the Radeon driver to output all sorts
- of debugging informations to provide to the maintainer when
+ of debugging information to provide to the maintainer when
something goes wrong.
config FB_ATY128
diff -ru a/drivers/w1/Kconfig b/drivers/w1/Kconfig
--- a/drivers/w1/Kconfig 2006-07-04 21:38:45.000000000 -0400
+++ b/drivers/w1/Kconfig 2006-07-05 14:21:20.000000000 -0400
@@ -21,7 +21,7 @@
There are three types of messages between w1 core and userspace:
1. Events. They are generated each time new master or slave device found
either due to automatic or requested search.
- 2. Userspace commands. Includes read/write and search/alarm search comamnds.
+ 2. Userspace commands. Includes read/write and search/alarm search commands.
3. Replies to userspace commands.
source drivers/w1/masters/Kconfig
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
