On 4/07/2006 12:10 a.m., Andrew Morton wrote:
On Mon, 03 Jul 2006 23:41:42 +1200
Reuben Farrelly <[email protected]> wrote:
On 3/07/2006 11:39 p.m., Andrew Morton wrote:
On Mon, 03 Jul 2006 23:00:34 +1200
Reuben Farrelly <[email protected]> wrote:
Allocate Port Service[0000:00:1c.0:pcie0]
Allocate Port Service[0000:00:1c.0:pcie0]
Could we have the full dmesg please?
Sure:
Still stumped. Could we have the dmesg for 2.6.17?
Here's the 2.6.17-git19 dmesg and an lspci -v. I'm not sure if you need me to
rollback further or not..
[root@tornado ~]# dmesg
Bootdata ok (command line is ro root=/dev/md0 panic=60 console=ttyS0,57600)
Linux version 2.6.17-git19 ([email protected]) (gcc version 4.1.1 20060629
(Red Hat 4.1.1-6)) #1 SMP Mon Jul 3 23:58:06 NZST 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003f670000 (usable)
BIOS-e820: 000000003f670000 - 000000003f6e9000 (ACPI NVS)
BIOS-e820: 000000003f6e9000 - 000000003f6ec000 (usable)
BIOS-e820: 000000003f6ec000 - 000000003f6ff000 (ACPI data)
BIOS-e820: 000000003f6ff000 - 000000003f700000 (usable)
DMI 2.3 present.
ACPI: RSDP (v000 INTEL ) @ 0x00000000000fe020
ACPI: RSDT (v001 INTEL D945GNT 0x00000f5a MSFT 0x01000013) @ 0x000000003f6fde48
ACPI: FADT (v001 INTEL D945GNT 0x00000f5a MSFT 0x01000013) @ 0x000000003f6fcf10
ACPI: MADT (v001 INTEL D945GNT 0x00000f5a MSFT 0x01000013) @ 0x000000003f6fce10
ACPI: WDDT (v001 INTEL D945GNT 0x00000f5a MSFT 0x01000013) @ 0x000000003f6f6f90
ACPI: MCFG (v001 INTEL D945GNT 0x00000f5a MSFT 0x01000013) @ 0x000000003f6f6f10
ACPI: ASF! (v032 INTEL D945GNT 0x00000f5a MSFT 0x01000013) @ 0x000000003f6fcd10
ACPI: HPET (v001 INTEL D945GNT 0x00000f5a MSFT 0x01000013) @ 0x000000003f6f6e90
ACPI: SSDT (v001 INTEL CpuPm 0x00000f5a MSFT 0x01000013) @ 0x000000003f6fdc10
ACPI: SSDT (v001 INTEL Cpu0Ist 0x00000f5a MSFT 0x01000013) @ 0x000000003f6fda10
ACPI: SSDT (v001 INTEL Cpu1Ist 0x00000f5a MSFT 0x01000013) @ 0x000000003f6fd810
ACPI: SSDT (v001 INTEL Cpu2Ist 0x00000f5a MSFT 0x01000013) @ 0x000000003f6fd610
ACPI: SSDT (v001 INTEL Cpu3Ist 0x00000f5a MSFT 0x01000013) @ 0x000000003f6fd410
ACPI: TCPA (v001 INTEL TIANO 0x00000002 MSFT 0x01000013) @ 0x000000003f670010
ACPI: DSDT (v001 INTEL D945GNT 0x00000f5a MSFT 0x01000013) @ 0x0000000000000000
On node 0 totalpages: 254558
DMA zone: 2450 pages, LIFO batch:0
DMA32 zone: 252108 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 40000000 (gap: 3f700000:c0900000)
Built 1 zonelists. Total pages: 254558
Kernel command line: ro root=/dev/md0 panic=60 console=ttyS0,57600
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer.
time.c: Detected 3000.118 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Checking aperture...
Memory: 1015088k/1039360k available (2552k kernel code, 22744k reserved, 1640k
data, 204k init)
Calibrating delay using timer specific routine.. 6006.39 BogoMIPS (lpj=12012785)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM1)
Freeing SMP alternatives: 28k freed
ACPI: Core revision 20060623
Using local APIC timer interrupts.
result 12500432
Detected 12.500 MHz APIC timer.
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 6000.13 BogoMIPS (lpj=12000263)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU1: Thermal monitoring enabled (TM1)
Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03
Brought up 2 CPUs
testing NMI watchdog ... OK.
migration_cost=10
checking if image is initramfs... it is
Freeing initrd memory: 877k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
Boot video device is 0000:00:02.0
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 *9 10 11 12)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
Intel 82802 RNG detected
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
hpet0: at MMIO 0xfed00000 (virtual 0xffffffffff5fe000), IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
PCI-GART: No AMD northbridge found.
PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
PCI: Bridge: 0000:00:1c.0
IO window: 2000-2fff
MEM window: 48000000-480fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.2
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.3
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.4
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.5
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: 1000-1fff
MEM window: disabled.
PREFETCH window: disabled.
Device `[PEX0]' is not power manageable<6>GSI 16 sharing vector 0xA9 and IRQ 16
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1c.0 to 64
Device `[PEX2]' is not power manageable<6>GSI 17 sharing vector 0xB1 and IRQ 17
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1c.2 to 64
Device `[PEX3]' is not power manageable<6>GSI 18 sharing vector 0xB9 and IRQ 18
ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:1c.3 to 64
Device `[PEX4]' is not power manageable<6>ACPI: PCI Interrupt 0000:00:1c.4[A] ->
GSI 17 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1c.4 to 64
Device `[PEX5]' is not power manageable<6>GSI 19 sharing vector 0xC1 and IRQ 19
ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 193
PCI: Setting latency timer of device 0000:00:1c.5 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1151933576.024:1): initialized
SELinux: Registering netfilter hooks
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered (default)
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
PCI: Setting latency timer of device 0000:00:1c.2 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.2:pcie00]
Allocate Port Service[0000:00:1c.2:pcie02]
PCI: Setting latency timer of device 0000:00:1c.3 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.3:pcie00]
Allocate Port Service[0000:00:1c.3:pcie02]
PCI: Setting latency timer of device 0000:00:1c.4 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.4:pcie00]
Allocate Port Service[0000:00:1c.4:pcie02]
PCI: Setting latency timer of device 0000:00:1c.5 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.5:pcie00]
Allocate Port Service[0000:00:1c.5:pcie02]
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Getting cpuindex for acpiid 0x3
ACPI: Getting cpuindex for acpiid 0x4
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
Linux agpgart interface v0.101 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ACPI: PCI Interrupt 0000:06:03.0[A] -> GSI 19 (level, low) -> IRQ 185
0000:06:03.0: ttyS1 at I/O 0x1000 (irq = 185) is a 16550A
0000:06:03.0: ttyS2 at I/O 0x1008 (irq = 185) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 4 RAM disks of 16384K size 1024 blocksize
Intel(R) PRO/1000 Network Driver - version 7.0.38-k4-NAPI
Copyright (c) 1999-2006 Intel Corporation.
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 193
PCI: Setting latency timer of device 0000:01:00.0 to 64
e1000: 0000:01:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:13:20:60:b4:23
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH7: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 177
ICH7: chipset revision 1
ICH7: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x30b0-0x30b7, BIOS settings: hda:DMA, hdb:pio
Probing IDE interface ide0...
hda: PIONEER DVD-RW DVR-111D, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
libata version 2.00 loaded.
ahci 0000:00:1f.2: version 2.0
Device `[IDES]' is not power manageable<6>ACPI: PCI Interrupt 0000:00:1f.2[B] ->
GSI 19 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part
ata1: SATA max UDMA/133 cmd 0xFFFFC20000016100 ctl 0x0 bmdma 0x0 irq 58
ata2: SATA max UDMA/133 cmd 0xFFFFC20000016180 ctl 0x0 bmdma 0x0 irq 58
ata3: SATA max UDMA/133 cmd 0xFFFFC20000016200 ctl 0x0 bmdma 0x0 irq 58
ata4: SATA max UDMA/133 cmd 0xFFFFC20000016280 ctl 0x0 bmdma 0x0 irq 58
scsi0 : ahci
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: configured for UDMA/133
scsi1 : ahci
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
scsi2 : ahci
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: configured for UDMA/133
scsi3 : ahci
ata4: SATA link down (SStatus 0 SControl 300)
Losing some ticks... checking if CPU frequency changed.
Vendor: ATA Model: ST380817AS Rev: 3.42
Type: Direct-Access ANSI SCSI revision: 05
Vendor: ATA Model: ST3300622AS Rev: 3.AA
Type: Direct-Access ANSI SCSI revision: 05
Vendor: ATA Model: ST380817AS Rev: 3.42
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 >
sd 0:0:0:0: Attached scsi disk sda
SCSI device sdb: 586072368 512-byte hdwr sectors (300069 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
SCSI device sdb: 586072368 512-byte hdwr sectors (300069 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
sdb: sdb1 sdb2 sdb3
sd 1:0:0:0: Attached scsi disk sdb
SCSI device sdc: 156301488 512-byte hdwr sectors (80026 MB)
sdc: Write Protect is off
sdc: Mode Sense: 00 3a 00 00
SCSI device sdc: drive cache: write back
SCSI device sdc: 156301488 512-byte hdwr sectors (80026 MB)
sdc: Write Protect is off
sdc: Mode Sense: 00 3a 00 00
SCSI device sdc: drive cache: write back
sdc: sdc1 sdc2 sdc3 sdc4 < sdc5 sdc6 sdc7 sdc8 sdc9 sdc10 sdc11 >
sd 2:0:0:0: Attached scsi disk sdc
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: Attached scsi generic sg2 type 0
Device `[EHCI]' is not power manageable<6>GSI 20 sharing vector 0x42 and IRQ 20
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 66
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 66, io mem 0x481a0400
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 66
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 66, io base 0x00003080
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 185, io base 0x00003060
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 177, io base 0x00003040
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 193
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 193, io base 0x00003020
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 2-1: new full speed USB device using uhci_hcd and address 2
usb 2-1: configuration #1 chosen from 1 choice
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 4 ports detected
usb 3-2: new full speed USB device using uhci_hcd and address 2
usb 3-2: configuration #1 chosen from 1 choice
usb 2-1.1: new low speed USB device using uhci_hcd and address 3
usb 2-1.1: configuration #1 chosen from 1 choice
usbcore: registered new driver libusual
usbcore: registered new driver hiddev
input: Belkin Components Belkin OmniView KVM Switch as /class/input/input0
input: USB HID v1.00 Keyboard [Belkin Components Belkin OmniView KVM Switch] on
usb-0000:00:1d.0-1.1
input: Belkin Components Belkin OmniView KVM Switch as /class/input/input1
input: USB HID v1.00 Mouse [Belkin Components Belkin OmniView KVM Switch] on
usb-0000:00:1d.0-1.1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: raid1 personality registered for level 1
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
EDAC MC: Ver: 2.0.0 Jul 3 2006
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
BIOS EDD facility v0.16 2004-Jun-25, 3 devices found
Freeing unused kernel memory: 204k freed
md: Autodetecting RAID arrays.
md: invalid raid superblock magic on sda10
md: sda10 has invalid sb, not importing!
md: invalid raid superblock magic on sdc10
md: sdc10 has invalid sb, not importing!
md: autorun ...
md: considering sdc11 ...
md: adding sdc11 ...
md: sdc7 has different UUID to sdc11
md: sdc6 has different UUID to sdc11
md: sdc5 has different UUID to sdc11
md: sdc3 has different UUID to sdc11
md: sdc2 has different UUID to sdc11
md: adding sda11 ...
md: sda7 has different UUID to sdc11
md: sda6 has different UUID to sdc11
md: sda5 has different UUID to sdc11
md: sda3 has different UUID to sdc11
md: sda2 has different UUID to sdc11
md: created md5
md: bind<sda11>
md: bind<sdc11>
md: running: <sdc11><sda11>
raid1: raid set md5 active with 2 out of 2 mirrors
md5: bitmap initialized from disk: read 10/10 pages, set 9 bits, status: 0
created bitmap (153 pages) for device md5
md: considering sdc7 ...
md: adding sdc7 ...
md: sdc6 has different UUID to sdc7
md: sdc5 has different UUID to sdc7
md: sdc3 has different UUID to sdc7
md: sdc2 has different UUID to sdc7
md: adding sda7 ...
md: sda6 has different UUID to sdc7
md: sda5 has different UUID to sdc7
md: sda3 has different UUID to sdc7
md: sda2 has different UUID to sdc7
md: created md4
md: bind<sda7>
md: bind<sdc7>
md: running: <sdc7><sda7>
raid1: raid set md4 active with 2 out of 2 mirrors
md4: bitmap initialized from disk: read 4/4 pages, set 6 bits, status: 0
created bitmap (61 pages) for device md4
md: considering sdc6 ...
md: adding sdc6 ...
md: sdc5 has different UUID to sdc6
md: sdc3 has different UUID to sdc6
md: sdc2 has different UUID to sdc6
md: adding sda6 ...
md: sda5 has different UUID to sdc6
md: sda3 has different UUID to sdc6
md: sda2 has different UUID to sdc6
md: created md3
md: bind<sda6>
md: bind<sdc6>
md: running: <sdc6><sda6>
raid1: raid set md3 active with 2 out of 2 mirrors
md3: bitmap initialized from disk: read 1/1 pages, set 2 bits, status: 0
created bitmap (13 pages) for device md3
md: considering sdc5 ...
md: adding sdc5 ...
md: sdc3 has different UUID to sdc5
md: sdc2 has different UUID to sdc5
md: adding sda5 ...
md: sda3 has different UUID to sdc5
md: sda2 has different UUID to sdc5
md: created md2
md: bind<sda5>
md: bind<sdc5>
md: running: <sdc5><sda5>
raid1: raid set md2 active with 2 out of 2 mirrors
md2: bitmap initialized from disk: read 10/10 pages, set 49 bits, status: 0
created bitmap (150 pages) for device md2
md: considering sdc3 ...
md: adding sdc3 ...
md: sdc2 has different UUID to sdc3
md: adding sda3 ...
md: sda2 has different UUID to sdc3
md: created md1
md: bind<sda3>
md: bind<sdc3>
md: running: <sdc3><sda3>
raid1: raid set md1 active with 2 out of 2 mirrors
md1: bitmap initialized from disk: read 10/10 pages, set 54 bits, status: 0
created bitmap (150 pages) for device md1
md: considering sdc2 ...
md: adding sdc2 ...
md: adding sda2 ...
md: created md0
md: bind<sda2>
md: bind<sdc2>
md: running: <sdc2><sda2>
raid1: raid set md0 active with 2 out of 2 mirrors
md0: bitmap initialized from disk: read 12/12 pages, set 44 bits, status: 0
created bitmap (187 pages) for device md0
md: ... autorun DONE.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
audit(1151933587.676:2): selinux=0 auid=4294967295
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 185
hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, UDMA(66)
Uniform CD-ROM driver Revision: 3.20
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
EXT3 FS on md0, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on md1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on md2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on md3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on md4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on md5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ReiserFS: sda8: found reiserfs format "3.6" with standard journal
ReiserFS: sda8: using ordered data mode
ReiserFS: sda8: journal params: device sda8, size 8192, journal first block 18,
max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda8: checking transaction log (sda8)
ReiserFS: sda8: Using r5 hash to sort names
ReiserFS: sdc8: found reiserfs format "3.6" with standard journal
ReiserFS: sdc8: using ordered data mode
ReiserFS: sdc8: journal params: device sdc8, size 8192, journal first block 18,
max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sdc8: checking transaction log (sdc8)
ReiserFS: sdc8: Using r5 hash to sort names
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdb1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdb2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 248968k swap on /dev/sda9. Priority:-1 extents:1 across:248968k
Adding 248968k swap on /dev/sdc9. Priority:-2 extents:1 across:248968k
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
ip_conntrack version 2.4 (4060 buckets, 32480 max) - 288 bytes per conntrack
e1000: eth0: e1000_watchdog_task: NIC Link is Up 1000 Mbps Full Duplex
GRE over IPv4 tunneling driver
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
Bluetooth: Core ver 2.8
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.7
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
eth0: no IPv6 routers present
[root@tornado ~]#
[root@tornado ~]# lspci -v
00:00.0 Host bridge: Intel Corporation 945G/GZ/P/PL Express Memory Controller
Hub (rev 02)
Subsystem: Intel Corporation DeskTop Board D945GTP
Flags: bus master, fast devsel, latency 0
Capabilities: [e0] Vendor Specific Information
00:02.0 VGA compatible controller: Intel Corporation 945G/GZ Express Integrated
Graphics Controller (rev 02) (prog-if 00 [VGA])
Subsystem: Intel Corporation DeskTop Board D945GTP
Flags: bus master, fast devsel, latency 0, IRQ 11
Memory at 48100000 (32-bit, non-prefetchable) [size=512K]
I/O ports at 30e0 [size=8]
Memory at 40000000 (32-bit, prefetchable) [size=128M]
Memory at 48180000 (32-bit, non-prefetchable) [size=128K]
Capabilities: [90] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
Capabilities: [d0] Power Management version 2
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1
(rev 01) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: 48000000-480fffff
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
Capabilities: [90] #0d [0000]
Capabilities: [a0] Power Management version 2
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3
(rev 01) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
Capabilities: [90] #0d [0000]
Capabilities: [a0] Power Management version 2
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4
(rev 01) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
Capabilities: [90] #0d [0000]
Capabilities: [a0] Power Management version 2
00:1c.4 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express
Port 5 (rev 01) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
Capabilities: [90] #0d [0000]
Capabilities: [a0] Power Management version 2
00:1c.5 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express
Port 6 (rev 01) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
Capabilities: [90] #0d [0000]
Capabilities: [a0] Power Management version 2
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev
01) (prog-if 00 [UHCI])
Subsystem: Intel Corporation DeskTop Board D945GTP
Flags: bus master, medium devsel, latency 0, IRQ 66
I/O ports at 3080 [size=32]
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev
01) (prog-if 00 [UHCI])
Subsystem: Intel Corporation DeskTop Board D945GTP
Flags: bus master, medium devsel, latency 0, IRQ 185
I/O ports at 3060 [size=32]
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev
01) (prog-if 00 [UHCI])
Subsystem: Intel Corporation DeskTop Board D945GTP
Flags: bus master, medium devsel, latency 0, IRQ 177
I/O ports at 3040 [size=32]
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev
01) (prog-if 00 [UHCI])
Subsystem: Intel Corporation DeskTop Board D945GTP
Flags: bus master, medium devsel, latency 0, IRQ 193
I/O ports at 3020 [size=32]
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI
Controller (rev 01) (prog-if 20 [EHCI])
Subsystem: Intel Corporation DeskTop Board D945GTP
Flags: bus master, medium devsel, latency 0, IRQ 66
Memory at 481a0400 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) (prog-if 01
[Subtractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=06, subordinate=06, sec-latency=32
I/O behind bridge: 00001000-00001fff
Capabilities: [50] #0d [0000]
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface
Bridge (rev 01)
Subsystem: Intel Corporation DeskTop Board D945GTP
Flags: bus master, medium devsel, latency 0
Capabilities: [e0] Vendor Specific Information
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller
(rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: Intel Corporation DeskTop Board D945GTP
Flags: bus master, medium devsel, latency 0, IRQ 177
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at 30b0 [size=16]
00:1f.2 SATA controller: Intel Corporation 82801GR/GH (ICH7 Family) Serial ATA
Storage Controller AHCI (rev 01) (prog-if 01 [AHCI 1.0])
Subsystem: Intel Corporation Unknown device 544e
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 58
I/O ports at 30c8 [size=8]
I/O ports at 30ec [size=4]
I/O ports at 30c0 [size=8]
I/O ports at 30e8 [size=4]
I/O ports at 30a0 [size=16]
Memory at 481a0000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
Capabilities: [70] Power Management version 2
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
Subsystem: Intel Corporation DeskTop Board D945GTP
Flags: medium devsel, IRQ 185
I/O ports at 3000 [size=32]
01:00.0 Ethernet controller: Intel Corporation 82573V Gigabit Ethernet
Controller (Copper) (rev 03)
Subsystem: Intel Corporation Unknown device 3094
Flags: bus master, fast devsel, latency 0, IRQ 74
Memory at 48000000 (32-bit, non-prefetchable) [size=128K]
I/O ports at 2000 [size=32]
Capabilities: [c8] Power Management version 2
Capabilities: [d0] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable+
Capabilities: [e0] Express Endpoint IRQ 0
06:03.0 Serial controller: Timedia Technology Co Ltd PCI2S550 (Dual 16550 UART)
(rev 01) (prog-if 02 [16550])
Subsystem: Timedia Technology Co Ltd Unknown device 0002
Flags: stepping, medium devsel, IRQ 185
I/O ports at 1000 [size=32]
[root@tornado ~]#
Reuben
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
