The irgflags consolidation did conflict with the ARM to generic IRQ
conversion and was not applied for ARM. Fix it up.
Use the new IRQF_ constants and remove the SA_INTERRUPT define
Signed-off-by: Thomas Gleixner <[email protected]>
arch/arm/common/time-acorn.c | 2 +-
arch/arm/kernel/irq.c | 24 ++++++++++++------------
arch/arm/mach-aaec2000/core.c | 2 +-
arch/arm/mach-at91rm9200/time.c | 2 +-
arch/arm/mach-clps711x/time.c | 2 +-
arch/arm/mach-clps7500/core.c | 2 +-
arch/arm/mach-ebsa110/core.c | 2 +-
arch/arm/mach-ep93xx/core.c | 2 +-
arch/arm/mach-footbridge/dc21285-timer.c | 2 +-
arch/arm/mach-footbridge/dc21285.c | 10 +++++-----
arch/arm/mach-footbridge/isa-timer.c | 4 ++--
arch/arm/mach-h720x/cpu-h7201.c | 2 +-
arch/arm/mach-h720x/cpu-h7202.c | 2 +-
arch/arm/mach-imx/time.c | 2 +-
arch/arm/mach-integrator/core.c | 2 +-
arch/arm/mach-integrator/time.c | 2 +-
arch/arm/mach-iop3xx/iop321-time.c | 2 +-
arch/arm/mach-iop3xx/iop331-time.c | 2 +-
arch/arm/mach-ixp2000/core.c | 2 +-
arch/arm/mach-ixp23xx/core.c | 2 +-
arch/arm/mach-ixp4xx/common.c | 2 +-
arch/arm/mach-ixp4xx/nas100d-power.c | 2 +-
arch/arm/mach-ixp4xx/nslu2-power.c | 4 ++--
arch/arm/mach-lh7a40x/time.c | 2 +-
arch/arm/mach-netx/time.c | 2 +-
arch/arm/mach-omap1/board-osk.c | 2 +-
arch/arm/mach-omap1/fpga.c | 2 +-
arch/arm/mach-omap1/pm.c | 2 +-
arch/arm/mach-omap1/serial.c | 2 +-
arch/arm/mach-omap1/time.c | 4 ++--
arch/arm/mach-omap2/board-apollon.c | 6 +++---
arch/arm/mach-omap2/timer-gp.c | 2 +-
arch/arm/mach-pnx4008/time.c | 2 +-
arch/arm/mach-pxa/corgi.c | 2 +-
arch/arm/mach-pxa/lubbock.c | 2 +-
arch/arm/mach-pxa/mainstone.c | 2 +-
arch/arm/mach-pxa/poodle.c | 2 +-
arch/arm/mach-pxa/sharpsl_pm.c | 8 ++++----
arch/arm/mach-pxa/spitz.c | 2 +-
arch/arm/mach-pxa/time.c | 2 +-
arch/arm/mach-pxa/tosa.c | 2 +-
arch/arm/mach-realview/core.c | 2 +-
arch/arm/mach-rpc/dma.c | 2 +-
arch/arm/mach-s3c2410/dma.c | 2 +-
arch/arm/mach-s3c2410/time.c | 2 +-
arch/arm/mach-s3c2410/usb-simtec.c | 4 ++--
arch/arm/mach-sa1100/collie_pm.c | 4 ++--
arch/arm/mach-sa1100/dma.c | 2 +-
arch/arm/mach-sa1100/h3600.c | 2 +-
arch/arm/mach-sa1100/time.c | 2 +-
arch/arm/mach-shark/core.c | 2 +-
arch/arm/mach-versatile/core.c | 2 +-
arch/arm/oprofile/op_model_xscale.c | 2 +-
arch/arm/plat-omap/dma.c | 2 +-
arch/arm/plat-omap/pm.c | 2 +-
arch/arm/plat-omap/timer32k.c | 2 +-
include/asm-arm/floppy.h | 2 +-
include/asm-arm/irq.h | 2 +-
include/asm-arm/signal.h | 6 ------
59 files changed, 83 insertions(+), 89 deletions(-)
Index: linux-2.6.git/include/asm-arm/floppy.h
===================================================================
--- linux-2.6.git.orig/include/asm-arm/floppy.h 2006-07-03 00:52:04.000000000 +0200
+++ linux-2.6.git/include/asm-arm/floppy.h 2006-07-03 00:54:19.000000000 +0200
@@ -25,7 +25,7 @@
#define fd_inb(port) inb((port))
#define fd_request_irq() request_irq(IRQ_FLOPPYDISK,floppy_interrupt,\
- SA_INTERRUPT,"floppy",NULL)
+ IRQF_DISABLED,"floppy",NULL)
#define fd_free_irq() free_irq(IRQ_FLOPPYDISK,NULL)
#define fd_disable_irq() disable_irq(IRQ_FLOPPYDISK)
#define fd_enable_irq() enable_irq(IRQ_FLOPPYDISK)
Index: linux-2.6.git/include/asm-arm/signal.h
===================================================================
--- linux-2.6.git.orig/include/asm-arm/signal.h 2006-07-03 00:52:04.000000000 +0200
+++ linux-2.6.git/include/asm-arm/signal.h 2006-07-03 00:54:19.000000000 +0200
@@ -82,7 +82,6 @@ typedef unsigned long sigset_t;
* is running in 26-bit.
* SA_ONSTACK allows alternate signal stacks (see sigaltstack(2)).
* SA_RESTART flag to get restarting signals (which were the default long ago)
- * SA_INTERRUPT is a no-op, but left due to historical reasons. Use the
* SA_NODEFER prevents the current signal from being masked in the handler.
* SA_RESETHAND clears the handler when the signal is delivered.
*
@@ -101,7 +100,6 @@ typedef unsigned long sigset_t;
#define SA_NOMASK SA_NODEFER
#define SA_ONESHOT SA_RESETHAND
-#define SA_INTERRUPT 0x20000000 /* dummy -- ignored */
/*
@@ -113,10 +111,6 @@ typedef unsigned long sigset_t;
#define MINSIGSTKSZ 2048
#define SIGSTKSZ 8192
-#ifdef __KERNEL__
-#define SA_TIMER 0x40000000
-#endif
-
#include <asm-generic/signal.h>
#ifdef __KERNEL__
Index: linux-2.6.git/arch/arm/common/time-acorn.c
===================================================================
--- linux-2.6.git.orig/arch/arm/common/time-acorn.c 2006-07-03 00:52:04.000000000 +0200
+++ linux-2.6.git/arch/arm/common/time-acorn.c 2006-07-03 00:54:19.000000000 +0200
@@ -77,7 +77,7 @@ ioc_timer_interrupt(int irq, void *dev_i
static struct irqaction ioc_timer_irq = {
.name = "timer",
- .flags = SA_INTERRUPT,
+ .flags = IRQF_DISABLED,
.handler = ioc_timer_interrupt
};
Index: linux-2.6.git/arch/arm/mach-aaec2000/core.c
===================================================================
--- linux-2.6.git.orig/arch/arm/mach-aaec2000/core.c 2006-07-03 00:52:04.000000000 +0200
+++ linux-2.6.git/arch/arm/mach-aaec2000/core.c 2006-07-03 00:54:19.000000000 +0200
@@ -142,7 +142,7 @@ aaec2000_timer_interrupt(int irq, void *
static struct irqaction aaec2000_timer_irq = {
.name = "AAEC-2000 Timer Tick",
- .flags = SA_INTERRUPT | SA_TIMER,
+ .flags = IRQF_DISABLED | IRQF_TIMER,
.handler = aaec2000_timer_interrupt,
};
Index: linux-2.6.git/arch/arm/mach-clps711x/time.c
===================================================================
--- linux-2.6.git.orig/arch/arm/mach-clps711x/time.c 2006-07-03 00:52:04.000000000 +0200
+++ linux-2.6.git/arch/arm/mach-clps711x/time.c 2006-07-03 00:54:19.000000000 +0200
@@ -58,7 +58,7 @@ p720t_timer_interrupt(int irq, void *dev
static struct irqaction clps711x_timer_irq = {
.name = "CLPS711x Timer Tick",
- .flags = SA_INTERRUPT | SA_TIMER,
+ .flags = IRQF_DISABLED | IRQF_TIMER,
.handler = p720t_timer_interrupt,
};
Index: linux-2.6.git/arch/arm/mach-clps7500/core.c
===================================================================
--- linux-2.6.git.orig/arch/arm/mach-clps7500/core.c 2006-07-03 00:52:04.000000000 +0200
+++ linux-2.6.git/arch/arm/mach-clps7500/core.c 2006-07-03 00:54:19.000000000 +0200
@@ -316,7 +316,7 @@ clps7500_timer_interrupt(int irq, void *
static struct irqaction clps7500_timer_irq = {
.name = "CLPS7500 Timer Tick",
- .flags = SA_INTERRUPT | SA_TIMER,
+ .flags = IRQF_DISABLED | IRQF_TIMER,
.handler = clps7500_timer_interrupt,
};
Index: linux-2.6.git/arch/arm/mach-ebsa110/core.c
===================================================================
--- linux-2.6.git.orig/arch/arm/mach-ebsa110/core.c 2006-07-03 00:52:04.000000000 +0200
+++ linux-2.6.git/arch/arm/mach-ebsa110/core.c 2006-07-03 00:54:19.000000000 +0200
@@ -199,7 +199,7 @@ ebsa110_timer_interrupt(int irq, void *d
static struct irqaction ebsa110_timer_irq = {
.name = "EBSA110 Timer Tick",
- .flags = SA_INTERRUPT | SA_TIMER,
+ .flags = IRQF_DISABLED | IRQF_TIMER,
.handler = ebsa110_timer_interrupt,
};
Index: linux-2.6.git/arch/arm/mach-ep93xx/core.c
===================================================================
--- linux-2.6.git.orig/arch/arm/mach-ep93xx/core.c 2006-07-03 00:52:04.000000000 +0200
+++ linux-2.6.git/arch/arm/mach-ep93xx/core.c 2006-07-03 00:54:19.000000000 +0200
@@ -116,7 +116,7 @@ static int ep93xx_timer_interrupt(int ir
static struct irqaction ep93xx_timer_irq = {
.name = "ep93xx timer",
- .flags = SA_INTERRUPT | SA_TIMER,
+ .flags = IRQF_DISABLED | IRQF_TIMER,
.handler = ep93xx_timer_interrupt,
};
Index: linux-2.6.git/arch/arm/mach-footbridge/dc21285.c
===================================================================
--- linux-2.6.git.orig/arch/arm/mach-footbridge/dc21285.c 2006-07-03 00:52:04.000000000 +0200
+++ linux-2.6.git/arch/arm/mach-footbridge/dc21285.c 2006-07-03 00:54:19.000000000 +0200
@@ -332,15 +332,15 @@ void __init dc21285_preinit(void)
/*
* We don't care if these fail.
*/
- request_irq(IRQ_PCI_SERR, dc21285_serr_irq, SA_INTERRUPT,
+ request_irq(IRQ_PCI_SERR, dc21285_serr_irq, IRQF_DISABLED,
"PCI system error", &serr_timer);
- request_irq(IRQ_PCI_PERR, dc21285_parity_irq, SA_INTERRUPT,
+ request_irq(IRQ_PCI_PERR, dc21285_parity_irq, IRQF_DISABLED,
"PCI parity error", &perr_timer);
- request_irq(IRQ_PCI_ABORT, dc21285_abort_irq, SA_INTERRUPT,
+ request_irq(IRQ_PCI_ABORT, dc21285_abort_irq, IRQF_DISABLED,
"PCI abort", NULL);
- request_irq(IRQ_DISCARD_TIMER, dc21285_discard_irq, SA_INTERRUPT,
+ request_irq(IRQ_DISCARD_TIMER, dc21285_discard_irq, IRQF_DISABLED,
"Discard timer", NULL);
- request_irq(IRQ_PCI_DPERR, dc21285_dparity_irq, SA_INTERRUPT,
+ request_irq(IRQ_PCI_DPERR, dc21285_dparity_irq, IRQF_DISABLED,
"PCI data parity", NULL);
if (cfn_mode) {
Index: linux-2.6.git/arch/arm/mach-footbridge/dc21285-timer.c
===================================================================
--- linux-2.6.git.orig/arch/arm/mach-footbridge/dc21285-timer.c 2006-07-03 00:52:04.000000000 +0200
+++ linux-2.6.git/arch/arm/mach-footbridge/dc21285-timer.c 2006-07-03 00:54:19.000000000 +0200
@@ -44,7 +44,7 @@ timer1_interrupt(int irq, void *dev_id,
static struct irqaction footbridge_timer_irq = {
.name = "Timer1 timer tick",
.handler = timer1_interrupt,
- .flags = SA_INTERRUPT | SA_TIMER,
+ .flags = IRQF_DISABLED | IRQF_TIMER,
};
/*
Index: linux-2.6.git/arch/arm/mach-footbridge/isa-timer.c
===================================================================
--- linux-2.6.git.orig/arch/arm/mach-footbridge/isa-timer.c 2006-07-03 00:52:04.000000000 +0200
+++ linux-2.6.git/arch/arm/mach-footbridge/isa-timer.c 2006-07-03 01:09:29.000000000 +0200
@@ -73,7 +73,7 @@ isa_timer_interrupt(int irq, void *dev_i
static struct irqaction isa_timer_irq = {
.name = "ISA timer tick",
.handler = isa_timer_interrupt,
- .flags = SA_INTERRUPT | SA_TIMER,
+ .flags = IRQF_DISABLED | IRQF_TIMER,
};
static void __init isa_timer_init(void)
Index: linux-2.6.git/arch/arm/mach-h720x/cpu-h7201.c
===================================================================
--- linux-2.6.git.orig/arch/arm/mach-h720x/cpu-h7201.c 2006-07-03 00:52:04.000000000 +0200
+++ linux-2.6.git/arch/arm/mach-h720x/cpu-h7201.c 2006-07-03 00:54:19.000000000 +0200
@@ -41,7 +41,7 @@ h7201_timer_interrupt(int irq, void *dev
static struct irqaction h7201_timer_irq = {
.name = "h7201 Timer Tick",
- .flags = SA_INTERRUPT | SA_TIMER,
+ .flags = IRQF_DISABLED | IRQF_TIMER,
.handler = h7201_timer_interrupt,
};
Index: linux-2.6.git/arch/arm/mach-h720x/cpu-h7202.c
===================================================================
--- linux-2.6.git.orig/arch/arm/mach-h720x/cpu-h7202.c 2006-07-03 00:52:04.000000000 +0200
+++ linux-2.6.git/arch/arm/mach-h720x/cpu-h7202.c 2006-07-03 00:54:19.000000000 +0200
@@ -171,7 +171,7 @@ static struct irqchip h7202_timerx_chip
static struct irqaction h7202_timer_irq = {
.name = "h7202 Timer Tick",
- .flags = SA_INTERRUPT | SA_TIMER,
+ .flags = IRQF_DISABLED | IRQF_TIMER,
.handler = h7202_timer_interrupt,
};
Index: linux-2.6.git/arch/arm/mach-imx/time.c
===================================================================
--- linux-2.6.git.orig/arch/arm/mach-imx/time.c 2006-07-03 00:52:04.000000000 +0200
+++ linux-2.6.git/arch/arm/mach-imx/time.c 2006-07-03 00:54:19.000000000 +0200
@@ -72,7 +72,7 @@ imx_timer_interrupt(int irq, void *dev_i
static struct irqaction imx_timer_irq = {
.name = "i.MX Timer Tick",
- .flags = SA_INTERRUPT | SA_TIMER,
+ .flags = IRQF_DISABLED | IRQF_TIMER,
.handler = imx_timer_interrupt,
};
Index: linux-2.6.git/arch/arm/mach-integrator/core.c
===================================================================
--- linux-2.6.git.orig/arch/arm/mach-integrator/core.c 2006-07-03 00:52:04.000000000 +0200
+++ linux-2.6.git/arch/arm/mach-integrator/core.c 2006-07-03 00:54:19.000000000 +0200
@@ -282,7 +282,7 @@ integrator_timer_interrupt(int irq, void
static struct irqaction integrator_timer_irq = {
.name = "Integrator Timer Tick",
- .flags = SA_INTERRUPT | SA_TIMER,
+ .flags = IRQF_DISABLED | IRQF_TIMER,
.handler = integrator_timer_interrupt,
};
Index: linux-2.6.git/arch/arm/mach-integrator/time.c
===================================================================
--- linux-2.6.git.orig/arch/arm/mach-integrator/time.c 2006-07-03 00:52:04.000000000 +0200
+++ linux-2.6.git/arch/arm/mach-integrator/time.c 2006-07-03 00:54:19.000000000 +0200
@@ -125,7 +125,7 @@ static int rtc_probe(struct amba_device
xtime.tv_sec = __raw_readl(rtc_base + RTC_DR);
- ret = request_irq(dev->irq[0], arm_rtc_interrupt, SA_INTERRUPT,
+ ret = request_irq(dev->irq[0], arm_rtc_interrupt, IRQF_DISABLED,
"rtc-pl030", dev);
if (ret)
goto map_out;
Index: linux-2.6.git/arch/arm/mach-iop3xx/iop321-time.c
===================================================================
--- linux-2.6.git.orig/arch/arm/mach-iop3xx/iop321-time.c 2006-07-03 00:52:04.000000000 +0200
+++ linux-2.6.git/arch/arm/mach-iop3xx/iop321-time.c 2006-07-03 00:54:19.000000000 +0200
@@ -85,7 +85,7 @@ iop321_timer_interrupt(int irq, void *de
static struct irqaction iop321_timer_irq = {
.name = "IOP321 Timer Tick",
.handler = iop321_timer_interrupt,
- .flags = SA_INTERRUPT | SA_TIMER,
+ .flags = IRQF_DISABLED | IRQF_TIMER,
};
static void __init iop321_timer_init(void)
Index: linux-2.6.git/arch/arm/mach-iop3xx/iop331-time.c
===================================================================
--- linux-2.6.git.orig/arch/arm/mach-iop3xx/iop331-time.c 2006-07-03 00:52:04.000000000 +0200
+++ linux-2.6.git/arch/arm/mach-iop3xx/iop331-time.c 2006-07-03 00:54:19.000000000 +0200
@@ -82,7 +82,7 @@ iop331_timer_interrupt(int irq, void *de
static struct irqaction iop331_timer_irq = {
.name = "IOP331 Timer Tick",
.handler = iop331_timer_interrupt,
- .flags = SA_INTERRUPT | SA_TIMER,
+ .flags = IRQF_DISABLED | IRQF_TIMER,
};
static void __init iop331_timer_init(void)
Index: linux-2.6.git/arch/arm/mach-ixp2000/core.c
===================================================================
--- linux-2.6.git.orig/arch/arm/mach-ixp2000/core.c 2006-07-03 00:52:04.000000000 +0200
+++ linux-2.6.git/arch/arm/mach-ixp2000/core.c 2006-07-03 00:54:19.000000000 +0200
@@ -224,7 +224,7 @@ static int ixp2000_timer_interrupt(int i
static struct irqaction ixp2000_timer_irq = {
.name = "IXP2000 Timer Tick",
- .flags = SA_INTERRUPT | SA_TIMER,
+ .flags = IRQF_DISABLED | IRQF_TIMER,
.handler = ixp2000_timer_interrupt,
};
Index: linux-2.6.git/arch/arm/mach-ixp23xx/core.c
===================================================================
--- linux-2.6.git.orig/arch/arm/mach-ixp23xx/core.c 2006-07-03 00:52:04.000000000 +0200
+++ linux-2.6.git/arch/arm/mach-ixp23xx/core.c 2006-07-03 00:54:19.000000000 +0200
@@ -363,7 +363,7 @@ ixp23xx_timer_interrupt(int irq, void *d
static struct irqaction ixp23xx_timer_irq = {
.name = "IXP23xx Timer Tick",
.handler = ixp23xx_timer_interrupt,
- .flags = SA_INTERRUPT | SA_TIMER,
+ .flags = IRQF_DISABLED | IRQF_TIMER,
};
void __init ixp23xx_init_timer(void)
Index: linux-2.6.git/arch/arm/mach-ixp4xx/common.c
===================================================================
--- linux-2.6.git.orig/arch/arm/mach-ixp4xx/common.c 2006-07-03 00:52:04.000000000 +0200
+++ linux-2.6.git/arch/arm/mach-ixp4xx/common.c 2006-07-03 00:54:19.000000000 +0200
@@ -287,7 +287,7 @@ static irqreturn_t ixp4xx_timer_interrup
static struct irqaction ixp4xx_timer_irq = {
.name = "IXP4xx Timer Tick",
- .flags = SA_INTERRUPT | SA_TIMER,
+ .flags = IRQF_DISABLED | IRQF_TIMER,
.handler = ixp4xx_timer_interrupt,
};
Index: linux-2.6.git/arch/arm/mach-ixp4xx/nas100d-power.c
===================================================================
--- linux-2.6.git.orig/arch/arm/mach-ixp4xx/nas100d-power.c 2006-07-03 00:52:04.000000000 +0200
+++ linux-2.6.git/arch/arm/mach-ixp4xx/nas100d-power.c 2006-07-03 00:54:19.000000000 +0200
@@ -42,7 +42,7 @@ static int __init nas100d_power_init(voi
set_irq_type(NAS100D_RB_IRQ, IRQT_LOW);
if (request_irq(NAS100D_RB_IRQ, &nas100d_reset_handler,
- SA_INTERRUPT, "NAS100D reset button", NULL) < 0) {
+ IRQF_DISABLED, "NAS100D reset button", NULL) < 0) {
printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
NAS100D_RB_IRQ);
Index: linux-2.6.git/arch/arm/mach-ixp4xx/nslu2-power.c
===================================================================
--- linux-2.6.git.orig/arch/arm/mach-ixp4xx/nslu2-power.c 2006-07-03 00:52:04.000000000 +0200
+++ linux-2.6.git/arch/arm/mach-ixp4xx/nslu2-power.c 2006-07-03 00:54:19.000000000 +0200
@@ -54,7 +54,7 @@ static int __init nslu2_power_init(void)
set_irq_type(NSLU2_PB_IRQ, IRQT_HIGH);
if (request_irq(NSLU2_RB_IRQ, &nslu2_reset_handler,
- SA_INTERRUPT, "NSLU2 reset button", NULL) < 0) {
+ IRQF_DISABLED, "NSLU2 reset button", NULL) < 0) {
printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
NSLU2_RB_IRQ);
@@ -63,7 +63,7 @@ static int __init nslu2_power_init(void)
}
if (request_irq(NSLU2_PB_IRQ, &nslu2_power_handler,
- SA_INTERRUPT, "NSLU2 power button", NULL) < 0) {
+ IRQF_DISABLED, "NSLU2 power button", NULL) < 0) {
printk(KERN_DEBUG "Power Button IRQ %d not available\n",
NSLU2_PB_IRQ);
Index: linux-2.6.git/arch/arm/mach-lh7a40x/time.c
===================================================================
--- linux-2.6.git.orig/arch/arm/mach-lh7a40x/time.c 2006-07-03 00:52:04.000000000 +0200
+++ linux-2.6.git/arch/arm/mach-lh7a40x/time.c 2006-07-03 00:54:19.000000000 +0200
@@ -53,7 +53,7 @@ lh7a40x_timer_interrupt(int irq, void *d
static struct irqaction lh7a40x_timer_irq = {
.name = "LHA740x Timer Tick",
- .flags = SA_INTERRUPT | SA_TIMER,
+ .flags = IRQF_DISABLED | IRQF_TIMER,
.handler = lh7a40x_timer_interrupt,
};
Index: linux-2.6.git/arch/arm/mach-netx/time.c
===================================================================
--- linux-2.6.git.orig/arch/arm/mach-netx/time.c 2006-07-03 00:52:04.000000000 +0200
+++ linux-2.6.git/arch/arm/mach-netx/time.c 2006-07-03 00:54:19.000000000 +0200
@@ -54,7 +54,7 @@ netx_timer_interrupt(int irq, void *dev_
static struct irqaction netx_timer_irq = {
.name = "NetX Timer Tick",
- .flags = SA_INTERRUPT | SA_TIMER,
+ .flags = IRQF_DISABLED | IRQF_TIMER,
.handler = netx_timer_interrupt,
};
Index: linux-2.6.git/arch/arm/mach-omap1/board-osk.c
===================================================================
--- linux-2.6.git.orig/arch/arm/mach-omap1/board-osk.c 2006-07-03 00:52:04.000000000 +0200
+++ linux-2.6.git/arch/arm/mach-omap1/board-osk.c 2006-07-03 00:54:19.000000000 +0200
@@ -357,7 +357,7 @@ static void __init osk_mistral_init(void
*/
ret = request_irq(OMAP_GPIO_IRQ(OMAP_MPUIO(2)),
&osk_mistral_wake_interrupt,
- SA_SHIRQ, "mistral_wakeup",
+ IRQF_SHARED, "mistral_wakeup",
&osk_mistral_wake_interrupt);
if (ret != 0) {
omap_free_gpio(OMAP_MPUIO(2));
Index: linux-2.6.git/arch/arm/mach-omap1/fpga.c
===================================================================
--- linux-2.6.git.orig/arch/arm/mach-omap1/fpga.c 2006-07-03 00:52:04.000000000 +0200
+++ linux-2.6.git/arch/arm/mach-omap1/fpga.c 2006-07-03 00:54:19.000000000 +0200
@@ -133,7 +133,7 @@ static struct irqchip omap_fpga_irq = {
* mask_ack routine for all of the FPGA interrupts has been changed from
* fpga_mask_ack_irq() to fpga_ack_irq() so that the specific FPGA interrupt
* being serviced is left unmasked. We can do this because the FPGA cascade
- * interrupt is installed with the SA_INTERRUPT flag, which leaves all
+ * interrupt is installed with the IRQF_DISABLED flag, which leaves all
* interrupts masked at the CPU while an FPGA interrupt handler executes.
*
* Limited testing indicates that this workaround appears to be effective
Index: linux-2.6.git/arch/arm/mach-omap1/pm.c
===================================================================
--- linux-2.6.git.orig/arch/arm/mach-omap1/pm.c 2006-07-03 00:52:04.000000000 +0200
+++ linux-2.6.git/arch/arm/mach-omap1/pm.c 2006-07-03 00:54:19.000000000 +0200
@@ -690,7 +690,7 @@ static irqreturn_t omap_wakeup_interrup
static struct irqaction omap_wakeup_irq = {
.name = "peripheral wakeup",
- .flags = SA_INTERRUPT,
+ .flags = IRQF_DISABLED,
.handler = omap_wakeup_interrupt
};
Index: linux-2.6.git/arch/arm/mach-omap1/serial.c
===================================================================
--- linux-2.6.git.orig/arch/arm/mach-omap1/serial.c 2006-07-03 00:52:04.000000000 +0200
+++ linux-2.6.git/arch/arm/mach-omap1/serial.c 2006-07-03 00:54:19.000000000 +0200
@@ -253,7 +253,7 @@ static void __init omap_serial_set_port_
}
omap_set_gpio_direction(gpio_nr, 1);
ret = request_irq(OMAP_GPIO_IRQ(gpio_nr), &omap_serial_wake_interrupt,
- SA_TRIGGER_RISING, "serial wakeup", NULL);
+ IRQF_TRIGGER_RISING, "serial wakeup", NULL);
if (ret) {
omap_free_gpio(gpio_nr);
printk(KERN_ERR "No interrupt for UART wake GPIO: %i\n",
Index: linux-2.6.git/arch/arm/mach-omap1/time.c
===================================================================
--- linux-2.6.git.orig/arch/arm/mach-omap1/time.c 2006-07-03 00:52:04.000000000 +0200
+++ linux-2.6.git/arch/arm/mach-omap1/time.c 2006-07-03 00:54:19.000000000 +0200
@@ -177,7 +177,7 @@ static irqreturn_t omap_mpu_timer_interr
static struct irqaction omap_mpu_timer_irq = {
.name = "mpu timer",
- .flags = SA_INTERRUPT | SA_TIMER,
+ .flags = IRQF_DISABLED | IRQF_TIMER,
.handler = omap_mpu_timer_interrupt,
};
@@ -191,7 +191,7 @@ static irqreturn_t omap_mpu_timer1_inter
static struct irqaction omap_mpu_timer1_irq = {
.name = "mpu timer1 overflow",
- .flags = SA_INTERRUPT,
+ .flags = IRQF_DISABLED,
.handler = omap_mpu_timer1_interrupt,
};
Index: linux-2.6.git/arch/arm/mach-omap2/board-apollon.c
===================================================================
--- linux-2.6.git.orig/arch/arm/mach-omap2/board-apollon.c 2006-07-03 00:52:04.000000000 +0200
+++ linux-2.6.git/arch/arm/mach-omap2/board-apollon.c 2006-07-03 00:54:19.000000000 +0200
@@ -234,17 +234,17 @@ static void __init apollon_sw_init(void)
set_irq_type(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), IRQT_RISING);
if (request_irq(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), &apollon_sw_interrupt,
- SA_SHIRQ, "enter sw",
+ IRQF_SHARED, "enter sw",
&apollon_sw_interrupt))
return;
set_irq_type(OMAP_GPIO_IRQ(SW_UP_GPIO17), IRQT_RISING);
if (request_irq(OMAP_GPIO_IRQ(SW_UP_GPIO17), &apollon_sw_interrupt,
- SA_SHIRQ, "up sw",
+ IRQF_SHARED, "up sw",
&apollon_sw_interrupt))
return;
set_irq_type(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), IRQT_RISING);
if (request_irq(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), &apollon_sw_interrupt,
- SA_SHIRQ, "down sw",
+ IRQF_SHARED, "down sw",
&apollon_sw_interrupt))
return;
}
Index: linux-2.6.git/arch/arm/mach-omap2/timer-gp.c
===================================================================
--- linux-2.6.git.orig/arch/arm/mach-omap2/timer-gp.c 2006-07-03 00:52:04.000000000 +0200
+++ linux-2.6.git/arch/arm/mach-omap2/timer-gp.c 2006-07-03 00:54:19.000000000 +0200
@@ -52,7 +52,7 @@ static irqreturn_t omap2_gp_timer_interr
static struct irqaction omap2_gp_timer_irq = {
.name = "gp timer",
- .flags = SA_INTERRUPT | SA_TIMER,
+ .flags = IRQF_DISABLED | IRQF_TIMER,
.handler = omap2_gp_timer_interrupt,
};
Index: linux-2.6.git/arch/arm/mach-pnx4008/time.c
===================================================================
--- linux-2.6.git.orig/arch/arm/mach-pnx4008/time.c 2006-07-03 00:52:04.000000000 +0200
+++ linux-2.6.git/arch/arm/mach-pnx4008/time.c 2006-07-03 00:54:19.000000000 +0200
@@ -86,7 +86,7 @@ static irqreturn_t pnx4008_timer_interru
static struct irqaction pnx4008_timer_irq = {
.name = "PNX4008 Tick Timer",
- .flags = SA_INTERRUPT | SA_TIMER,
+ .flags = IRQF_DISABLED | IRQF_TIMER,
.handler = pnx4008_timer_interrupt
};
Index: linux-2.6.git/arch/arm/mach-pxa/corgi.c
===================================================================
--- linux-2.6.git.orig/arch/arm/mach-pxa/corgi.c 2006-07-03 00:52:04.000000000 +0200
+++ linux-2.6.git/arch/arm/mach-pxa/corgi.c 2006-07-03 00:54:19.000000000 +0200
@@ -225,7 +225,7 @@ static int corgi_mci_init(struct device
corgi_mci_platform_data.detect_delay = msecs_to_jiffies(250);
err = request_irq(CORGI_IRQ_GPIO_nSD_DETECT, corgi_detect_int,
- SA_INTERRUPT | SA_TRIGGER_RISING | SA_TRIGGER_FALLING,
+ IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
"MMC card detect", data);
if (err) {
printk(KERN_ERR "corgi_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
Index: linux-2.6.git/arch/arm/mach-pxa/lubbock.c
===================================================================
--- linux-2.6.git.orig/arch/arm/mach-pxa/lubbock.c 2006-07-03 00:52:04.000000000 +0200
+++ linux-2.6.git/arch/arm/mach-pxa/lubbock.c 2006-07-03 00:54:19.000000000 +0200
@@ -419,7 +419,7 @@ static int lubbock_mci_init(struct devic
init_timer(&mmc_timer);
mmc_timer.data = (unsigned long) data;
return request_irq(LUBBOCK_SD_IRQ, lubbock_detect_int,
- SA_SAMPLE_RANDOM, "lubbock-sd-detect", data);
+ IRQF_SAMPLE_RANDOM, "lubbock-sd-detect", data);
}
static int lubbock_mci_get_ro(struct device *dev)
Index: linux-2.6.git/arch/arm/mach-pxa/mainstone.c
===================================================================
--- linux-2.6.git.orig/arch/arm/mach-pxa/mainstone.c 2006-07-03 00:52:04.000000000 +0200
+++ linux-2.6.git/arch/arm/mach-pxa/mainstone.c 2006-07-03 00:54:19.000000000 +0200
@@ -331,7 +331,7 @@ static int mainstone_mci_init(struct dev
*/
MST_MSCWR1 &= ~MST_MSCWR1_MS_SEL;
- err = request_irq(MAINSTONE_MMC_IRQ, mstone_detect_int, SA_INTERRUPT,
+ err = request_irq(MAINSTONE_MMC_IRQ, mstone_detect_int, IRQF_DISABLED,
"MMC card detect", data);
if (err) {
printk(KERN_ERR "mainstone_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
Index: linux-2.6.git/arch/arm/mach-pxa/poodle.c
===================================================================
--- linux-2.6.git.orig/arch/arm/mach-pxa/poodle.c 2006-07-03 00:52:04.000000000 +0200
+++ linux-2.6.git/arch/arm/mach-pxa/poodle.c 2006-07-03 00:54:19.000000000 +0200
@@ -212,7 +212,7 @@ static int poodle_mci_init(struct device
poodle_mci_platform_data.detect_delay = msecs_to_jiffies(250);
err = request_irq(POODLE_IRQ_GPIO_nSD_DETECT, poodle_detect_int,
- SA_INTERRUPT | SA_TRIGGER_RISING | SA_TRIGGER_FALLING,
+ IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
"MMC card detect", data);
if (err) {
printk(KERN_ERR "poodle_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
Index: linux-2.6.git/arch/arm/mach-pxa/sharpsl_pm.c
===================================================================
--- linux-2.6.git.orig/arch/arm/mach-pxa/sharpsl_pm.c 2006-07-03 00:52:04.000000000 +0200
+++ linux-2.6.git/arch/arm/mach-pxa/sharpsl_pm.c 2006-07-03 00:54:19.000000000 +0200
@@ -142,18 +142,18 @@ void sharpsl_pm_pxa_init(void)
pxa_gpio_mode(sharpsl_pm.machinfo->gpio_batlock | GPIO_IN);
/* Register interrupt handlers */
- if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr, SA_INTERRUPT, "AC Input Detect", sharpsl_ac_isr)) {
+ if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr, IRQF_DISABLED, "AC Input Detect", sharpsl_ac_isr)) {
dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin));
}
else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin),IRQT_BOTHEDGE);
- if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr, SA_INTERRUPT, "Battery Cover", sharpsl_fatal_isr)) {
+ if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr, IRQF_DISABLED, "Battery Cover", sharpsl_fatal_isr)) {
dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock));
}
else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock),IRQT_FALLING);
if (sharpsl_pm.machinfo->gpio_fatal) {
- if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr, SA_INTERRUPT, "Fatal Battery", sharpsl_fatal_isr)) {
+ if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr, IRQF_DISABLED, "Fatal Battery", sharpsl_fatal_isr)) {
dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal));
}
else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal),IRQT_FALLING);
@@ -162,7 +162,7 @@ void sharpsl_pm_pxa_init(void)
if (sharpsl_pm.machinfo->batfull_irq)
{
/* Register interrupt handler. */
- if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, SA_INTERRUPT, "CO", sharpsl_chrg_full_isr)) {
+ if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, IRQF_DISABLED, "CO", sharpsl_chrg_full_isr)) {
dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull));
}
else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull),IRQT_RISING);
Index: linux-2.6.git/arch/arm/mach-pxa/spitz.c
===================================================================
--- linux-2.6.git.orig/arch/arm/mach-pxa/spitz.c 2006-07-03 00:52:04.000000000 +0200
+++ linux-2.6.git/arch/arm/mach-pxa/spitz.c 2006-07-03 00:54:19.000000000 +0200
@@ -308,7 +308,7 @@ static int spitz_mci_init(struct device
spitz_mci_platform_data.detect_delay = msecs_to_jiffies(250);
err = request_irq(SPITZ_IRQ_GPIO_nSD_DETECT, spitz_detect_int,
- SA_INTERRUPT | SA_TRIGGER_RISING | SA_TRIGGER_FALLING,
+ IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
"MMC card detect", data);
if (err) {
printk(KERN_ERR "spitz_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
Index: linux-2.6.git/arch/arm/mach-pxa/time.c
===================================================================
--- linux-2.6.git.orig/arch/arm/mach-pxa/time.c 2006-07-03 00:52:04.000000000 +0200
+++ linux-2.6.git/arch/arm/mach-pxa/time.c 2006-07-03 00:54:19.000000000 +0200
@@ -117,7 +117,7 @@ pxa_timer_interrupt(int irq, void *dev_i
static struct irqaction pxa_timer_irq = {
.name = "PXA Timer Tick",
- .flags = SA_INTERRUPT | SA_TIMER,
+ .flags = IRQF_DISABLED | IRQF_TIMER,
.handler = pxa_timer_interrupt,
};
Index: linux-2.6.git/arch/arm/mach-pxa/tosa.c
===================================================================
--- linux-2.6.git.orig/arch/arm/mach-pxa/tosa.c 2006-07-03 00:52:04.000000000 +0200
+++ linux-2.6.git/arch/arm/mach-pxa/tosa.c 2006-07-03 00:54:19.000000000 +0200
@@ -185,7 +185,7 @@ static int tosa_mci_init(struct device *
tosa_mci_platform_data.detect_delay = msecs_to_jiffies(250);
- err = request_irq(TOSA_IRQ_GPIO_nSD_DETECT, tosa_detect_int, SA_INTERRUPT,
+ err = request_irq(TOSA_IRQ_GPIO_nSD_DETECT, tosa_detect_int, IRQF_DISABLED,
"MMC/SD card detect", data);
if (err) {
printk(KERN_ERR "tosa_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
Index: linux-2.6.git/arch/arm/mach-realview/core.c
===================================================================
--- linux-2.6.git.orig/arch/arm/mach-realview/core.c 2006-07-03 00:52:04.000000000 +0200
+++ linux-2.6.git/arch/arm/mach-realview/core.c 2006-07-03 00:54:19.000000000 +0200
@@ -536,7 +536,7 @@ static irqreturn_t realview_timer_interr
static struct irqaction realview_timer_irq = {
.name = "RealView Timer Tick",
- .flags = SA_INTERRUPT | SA_TIMER,
+ .flags = IRQF_DISABLED | IRQF_TIMER,
.handler = realview_timer_interrupt,
};
Index: linux-2.6.git/arch/arm/mach-rpc/dma.c
===================================================================
--- linux-2.6.git.orig/arch/arm/mach-rpc/dma.c 2006-07-03 00:52:04.000000000 +0200
+++ linux-2.6.git/arch/arm/mach-rpc/dma.c 2006-07-03 00:54:19.000000000 +0200
@@ -128,7 +128,7 @@ static irqreturn_t iomd_dma_handle(int i
static int iomd_request_dma(dmach_t channel, dma_t *dma)
{
return request_irq(dma->dma_irq, iomd_dma_handle,
- SA_INTERRUPT, dma->device_id, dma);
+ IRQF_DISABLED, dma->device_id, dma);
}
static void iomd_free_dma(dmach_t channel, dma_t *dma)
Index: linux-2.6.git/arch/arm/mach-s3c2410/dma.c
===================================================================
--- linux-2.6.git.orig/arch/arm/mach-s3c2410/dma.c 2006-07-03 00:52:04.000000000 +0200
+++ linux-2.6.git/arch/arm/mach-s3c2410/dma.c 2006-07-03 00:54:19.000000000 +0200
@@ -718,7 +718,7 @@ int s3c2410_dma_request(unsigned int cha
pr_debug("dma%d: %s : requesting irq %d\n",
channel, __FUNCTION__, chan->irq);
- err = request_irq(chan->irq, s3c2410_dma_irq, SA_INTERRUPT,
+ err = request_irq(chan->irq, s3c2410_dma_irq, IRQF_DISABLED,
client->name, (void *)chan);
if (err) {
Index: linux-2.6.git/arch/arm/mach-s3c2410/time.c
===================================================================
--- linux-2.6.git.orig/arch/arm/mach-s3c2410/time.c 2006-07-03 00:52:04.000000000 +0200
+++ linux-2.6.git/arch/arm/mach-s3c2410/time.c 2006-07-03 00:54:19.000000000 +0200
@@ -138,7 +138,7 @@ s3c2410_timer_interrupt(int irq, void *d
static struct irqaction s3c2410_timer_irq = {
.name = "S3C2410 Timer Tick",
- .flags = SA_INTERRUPT | SA_TIMER,
+ .flags = IRQF_DISABLED | IRQF_TIMER,
.handler = s3c2410_timer_interrupt,
};
Index: linux-2.6.git/arch/arm/mach-s3c2410/usb-simtec.c
===================================================================
--- linux-2.6.git.orig/arch/arm/mach-s3c2410/usb-simtec.c 2006-07-03 00:52:04.000000000 +0200
+++ linux-2.6.git/arch/arm/mach-s3c2410/usb-simtec.c 2006-07-03 00:54:19.000000000 +0200
@@ -85,8 +85,8 @@ static void usb_simtec_enableoc(struct s
if (on) {
ret = request_irq(IRQ_USBOC, usb_simtec_ocirq,
- SA_INTERRUPT | SA_TRIGGER_RISING |
- SA_TRIGGER_FALLING,
+ IRQF_DISABLED | IRQF_TRIGGER_RISING |
+ IRQF_TRIGGER_FALLING,
"USB Over-current", info);
if (ret != 0) {
printk(KERN_ERR "failed to request usb oc irq\n");
Index: linux-2.6.git/arch/arm/mach-sa1100/collie_pm.c
===================================================================
--- linux-2.6.git.orig/arch/arm/mach-sa1100/collie_pm.c 2006-07-03 00:52:04.000000000 +0200
+++ linux-2.6.git/arch/arm/mach-sa1100/collie_pm.c 2006-07-03 00:54:19.000000000 +0200
@@ -45,12 +45,12 @@ static void collie_charger_init(void)
}
/* Register interrupt handler. */
- if ((err = request_irq(COLLIE_IRQ_GPIO_AC_IN, sharpsl_ac_isr, SA_INTERRUPT,
+ if ((err = request_irq(COLLIE_IRQ_GPIO_AC_IN, sharpsl_ac_isr, IRQF_DISABLED,
"ACIN", sharpsl_ac_isr))) {
printk("Could not get irq %d.\n", COLLIE_IRQ_GPIO_AC_IN);
return;
}
- if ((err = request_irq(COLLIE_IRQ_GPIO_CO, sharpsl_chrg_full_isr, SA_INTERRUPT,
+ if ((err = request_irq(COLLIE_IRQ_GPIO_CO, sharpsl_chrg_full_isr, IRQF_DISABLED,
"CO", sharpsl_chrg_full_isr))) {
free_irq(COLLIE_IRQ_GPIO_AC_IN, sharpsl_ac_isr);
printk("Could not get irq %d.\n", COLLIE_IRQ_GPIO_CO);
Index: linux-2.6.git/arch/arm/mach-sa1100/dma.c
===================================================================
--- linux-2.6.git.orig/arch/arm/mach-sa1100/dma.c 2006-07-03 00:52:04.000000000 +0200
+++ linux-2.6.git/arch/arm/mach-sa1100/dma.c 2006-07-03 00:54:19.000000000 +0200
@@ -124,7 +124,7 @@ int sa1100_request_dma (dma_device_t dev
i = dma - dma_chan;
regs = (dma_regs_t *)&DDAR(i);
- err = request_irq(IRQ_DMA0 + i, dma_irq_handler, SA_INTERRUPT,
+ err = request_irq(IRQ_DMA0 + i, dma_irq_handler, IRQF_DISABLED,
device_id, regs);
if (err) {
printk(KERN_ERR
Index: linux-2.6.git/arch/arm/mach-sa1100/h3600.c
===================================================================
--- linux-2.6.git.orig/arch/arm/mach-sa1100/h3600.c 2006-07-03 00:52:04.000000000 +0200
+++ linux-2.6.git/arch/arm/mach-sa1100/h3600.c 2006-07-03 00:54:19.000000000 +0200
@@ -740,7 +740,7 @@ static void h3800_IRQ_demux(unsigned int
static struct irqaction h3800_irq = {
.name = "h3800_asic",
.handler = h3800_IRQ_demux,
- .flags = SA_INTERRUPT | SA_TIMER,
+ .flags = IRQF_DISABLED | IRQF_TIMER,
};
u32 kpio_int_shadow = 0;
Index: linux-2.6.git/arch/arm/mach-sa1100/time.c
===================================================================
--- linux-2.6.git.orig/arch/arm/mach-sa1100/time.c 2006-07-03 00:52:04.000000000 +0200
+++ linux-2.6.git/arch/arm/mach-sa1100/time.c 2006-07-03 00:54:19.000000000 +0200
@@ -111,7 +111,7 @@ sa1100_timer_interrupt(int irq, void *de
static struct irqaction sa1100_timer_irq = {
.name = "SA11xx Timer Tick",
- .flags = SA_INTERRUPT | SA_TIMER,
+ .flags = IRQF_DISABLED | IRQF_TIMER,
.handler = sa1100_timer_interrupt,
};
Index: linux-2.6.git/arch/arm/mach-shark/core.c
===================================================================
--- linux-2.6.git.orig/arch/arm/mach-shark/core.c 2006-07-03 00:52:04.000000000 +0200
+++ linux-2.6.git/arch/arm/mach-shark/core.c 2006-07-03 00:54:19.000000000 +0200
@@ -90,7 +90,7 @@ shark_timer_interrupt(int irq, void *dev
static struct irqaction shark_timer_irq = {
.name = "Shark Timer Tick",
- .flags = SA_INTERRUPT | SA_TIMER,
+ .flags = IRQF_DISABLED | IRQF_TIMER,
.handler = shark_timer_interrupt,
};
Index: linux-2.6.git/arch/arm/mach-versatile/core.c
===================================================================
--- linux-2.6.git.orig/arch/arm/mach-versatile/core.c 2006-07-03 00:52:04.000000000 +0200
+++ linux-2.6.git/arch/arm/mach-versatile/core.c 2006-07-03 00:54:19.000000000 +0200
@@ -869,7 +869,7 @@ static irqreturn_t versatile_timer_inter
static struct irqaction versatile_timer_irq = {
.name = "Versatile Timer Tick",
- .flags = SA_INTERRUPT | SA_TIMER,
+ .flags = IRQF_DISABLED | IRQF_TIMER,
.handler = versatile_timer_interrupt,
};
Index: linux-2.6.git/arch/arm/oprofile/op_model_xscale.c
===================================================================
--- linux-2.6.git.orig/arch/arm/oprofile/op_model_xscale.c 2006-07-03 00:52:04.000000000 +0200
+++ linux-2.6.git/arch/arm/oprofile/op_model_xscale.c 2006-07-03 00:54:19.000000000 +0200
@@ -384,7 +384,7 @@ static int xscale_pmu_start(void)
int ret;
u32 pmnc = read_pmnc();
- ret = request_irq(XSCALE_PMU_IRQ, xscale_pmu_interrupt, SA_INTERRUPT,
+ ret = request_irq(XSCALE_PMU_IRQ, xscale_pmu_interrupt, IRQF_DISABLED,
"XScale PMU", (void *)results);
if (ret < 0) {
Index: linux-2.6.git/arch/arm/plat-omap/dma.c
===================================================================
--- linux-2.6.git.orig/arch/arm/plat-omap/dma.c 2006-07-03 00:52:04.000000000 +0200
+++ linux-2.6.git/arch/arm/plat-omap/dma.c 2006-07-03 00:54:19.000000000 +0200
@@ -939,7 +939,7 @@ static irqreturn_t omap2_dma_irq_handler
static struct irqaction omap24xx_dma_irq = {
.name = "DMA",
.handler = omap2_dma_irq_handler,
- .flags = SA_INTERRUPT
+ .flags = IRQF_DISABLED
};
#else
Index: linux-2.6.git/arch/arm/plat-omap/pm.c
===================================================================
--- linux-2.6.git.orig/arch/arm/plat-omap/pm.c 2006-07-03 00:52:04.000000000 +0200
+++ linux-2.6.git/arch/arm/plat-omap/pm.c 2006-07-03 00:54:19.000000000 +0200
@@ -580,7 +580,7 @@ static irqreturn_t omap_wakeup_interrup
static struct irqaction omap_wakeup_irq = {
.name = "peripheral wakeup",
- .flags = SA_INTERRUPT,
+ .flags = IRQF_DISABLED,
.handler = omap_wakeup_interrupt
};
Index: linux-2.6.git/arch/arm/plat-omap/timer32k.c
===================================================================
--- linux-2.6.git.orig/arch/arm/plat-omap/timer32k.c 2006-07-03 00:52:04.000000000 +0200
+++ linux-2.6.git/arch/arm/plat-omap/timer32k.c 2006-07-03 00:54:19.000000000 +0200
@@ -258,7 +258,7 @@ static struct dyn_tick_timer omap_dyn_ti
static struct irqaction omap_32k_timer_irq = {
.name = "32KHz timer",
- .flags = SA_INTERRUPT | SA_TIMER,
+ .flags = IRQF_DISABLED | IRQF_TIMER,
.handler = omap_32k_timer_interrupt,
};
Index: linux-2.6.git/arch/arm/mach-at91rm9200/at91rm9200_time.c
===================================================================
--- linux-2.6.git.orig/arch/arm/mach-at91rm9200/at91rm9200_time.c 2006-07-03 00:52:04.000000000 +0200
+++ linux-2.6.git/arch/arm/mach-at91rm9200/at91rm9200_time.c 2006-07-03 00:54:19.000000000 +0200
@@ -85,7 +85,7 @@ static irqreturn_t at91rm9200_timer_inte
static struct irqaction at91rm9200_timer_irq = {
.name = "at91_tick",
- .flags = SA_SHIRQ | SA_INTERRUPT | SA_TIMER,
+ .flags = IRQF_SHARED | IRQF_DISABLED | IRQF_TIMER,
.handler = at91rm9200_timer_interrupt
};
Index: linux-2.6.git/arch/arm/mach-pxa/trizeps4.c
===================================================================
--- linux-2.6.git.orig/arch/arm/mach-pxa/trizeps4.c 2006-07-03 00:52:04.000000000 +0200
+++ linux-2.6.git/arch/arm/mach-pxa/trizeps4.c 2006-07-03 00:54:19.000000000 +0200
@@ -283,7 +283,9 @@ static int trizeps4_mci_init(struct devi
pxa_gpio_mode(GPIO_MMC_DET | GPIO_IN);
- err = request_irq(TRIZEPS4_MMC_IRQ, mci_detect_int, SA_INTERRUPT | SA_TRIGGER_RISING, "MMC card detect", data);
+ err = request_irq(TRIZEPS4_MMC_IRQ, mci_detect_int,
+ IRQF_DISABLED | IRQF_TRIGGER_RISING,
+ "MMC card detect", data);
if (err) {
printk(KERN_ERR "trizeps4_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
return -1;
Index: linux-2.6.git/include/asm-arm/hw_irq.h
===================================================================
--- linux-2.6.git.orig/include/asm-arm/hw_irq.h 2006-07-03 00:52:04.000000000 +0200
+++ linux-2.6.git/include/asm-arm/hw_irq.h 2006-07-03 00:54:19.000000000 +0200
@@ -9,7 +9,7 @@
#if defined(CONFIG_NO_IDLE_HZ)
# include <asm/dyntick.h>
# define handle_dynamic_tick(action) \
- if (!(action->flags & SA_TIMER) && system_timer->dyn_tick) { \
+ if (!(action->flags & IRQF_TIMER) && system_timer->dyn_tick) { \
write_seqlock(&xtime_lock); \
if (system_timer->dyn_tick->state & DYN_TICK_ENABLED) \
system_timer->dyn_tick->handler(irq, 0, regs); \
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
