Signed-off-by: Thomas Gleixner <[email protected]>
drivers/scsi/3w-9xxx.c | 2 +-
drivers/scsi/3w-xxxx.c | 2 +-
drivers/scsi/53c7xx.c | 4 ++--
drivers/scsi/BusLogic.c | 2 +-
drivers/scsi/NCR5380.c | 2 +-
drivers/scsi/NCR_D700.c | 2 +-
drivers/scsi/NCR_Q720.c | 2 +-
drivers/scsi/a100u2w.c | 2 +-
drivers/scsi/a2091.c | 2 +-
drivers/scsi/a3000.c | 2 +-
drivers/scsi/aacraid/rkt.c | 2 +-
drivers/scsi/aacraid/rx.c | 2 +-
drivers/scsi/aacraid/sa.c | 2 +-
drivers/scsi/advansys.c | 18 +++++++++---------
drivers/scsi/aha152x.c | 4 ++--
drivers/scsi/aha1740.c | 2 +-
drivers/scsi/ahci.c | 2 +-
drivers/scsi/aic7xxx/aic7770_osm.c | 2 +-
drivers/scsi/aic7xxx/aic79xx_osm_pci.c | 2 +-
drivers/scsi/aic7xxx/aic7xxx_osm_pci.c | 2 +-
drivers/scsi/aic7xxx_old.c | 4 ++--
drivers/scsi/arm/acornscsi.c | 2 +-
drivers/scsi/arm/cumana_1.c | 2 +-
drivers/scsi/arm/cumana_2.c | 2 +-
drivers/scsi/arm/powertec.c | 2 +-
drivers/scsi/atp870u.c | 6 +++---
drivers/scsi/blz1230.c | 2 +-
drivers/scsi/blz2060.c | 2 +-
drivers/scsi/cyberstorm.c | 2 +-
drivers/scsi/cyberstormII.c | 2 +-
drivers/scsi/dc395x.c | 2 +-
drivers/scsi/dec_esp.c | 10 +++++-----
drivers/scsi/dmx3191d.c | 2 +-
drivers/scsi/dpt_i2o.c | 2 +-
drivers/scsi/dtc.c | 2 +-
drivers/scsi/eata.c | 2 +-
drivers/scsi/eata_pio.c | 4 ++--
drivers/scsi/esp.c | 2 +-
drivers/scsi/fastlane.c | 2 +-
drivers/scsi/fd_mcs.c | 2 +-
drivers/scsi/fdomain.c | 2 +-
drivers/scsi/g_NCR5380.c | 2 +-
drivers/scsi/gdth.c | 6 +++---
drivers/scsi/gvp11.c | 2 +-
drivers/scsi/hptiop.c | 2 +-
drivers/scsi/ibmmca.c | 6 +++---
drivers/scsi/in2000.c | 2 +-
drivers/scsi/initio.c | 2 +-
drivers/scsi/ipr.c | 2 +-
drivers/scsi/ips.c | 4 ++--
drivers/scsi/jazz_esp.c | 2 +-
drivers/scsi/lasi700.c | 2 +-
drivers/scsi/libata-bmdma.c | 2 +-
drivers/scsi/lpfc/lpfc_init.c | 2 +-
drivers/scsi/megaraid.c | 2 +-
drivers/scsi/megaraid/megaraid_mbox.c | 2 +-
drivers/scsi/megaraid/megaraid_sas.c | 2 +-
drivers/scsi/nsp32.c | 2 +-
drivers/scsi/oktagon_esp.c | 2 +-
drivers/scsi/pas16.c | 2 +-
drivers/scsi/pcmcia/nsp_cs.c | 2 +-
drivers/scsi/pcmcia/sym53c500_cs.c | 2 +-
drivers/scsi/pdc_adma.c | 2 +-
drivers/scsi/qla1280.c | 4 ++--
drivers/scsi/qla2xxx/qla_os.c | 2 +-
drivers/scsi/qlogicpti.c | 2 +-
drivers/scsi/sata_mv.c | 2 +-
drivers/scsi/sata_promise.c | 2 +-
drivers/scsi/sata_qstor.c | 2 +-
drivers/scsi/sata_sil.c | 2 +-
drivers/scsi/sata_sil24.c | 2 +-
drivers/scsi/sata_svw.c | 2 +-
drivers/scsi/sata_sx4.c | 2 +-
drivers/scsi/sata_via.c | 2 +-
drivers/scsi/sata_vsc.c | 2 +-
drivers/scsi/seagate.c | 2 +-
drivers/scsi/sim710.c | 2 +-
drivers/scsi/sun3x_esp.c | 2 +-
drivers/scsi/sym53c8xx_2/sym_glue.c | 2 +-
drivers/scsi/t128.c | 2 +-
drivers/scsi/tmscsim.c | 2 +-
drivers/scsi/u14-34f.c | 2 +-
drivers/scsi/wd7000.c | 2 +-
drivers/scsi/zalon.c | 2 +-
84 files changed, 108 insertions(+), 108 deletions(-)
Index: linux-2.6.git/drivers/scsi/3w-9xxx.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/3w-9xxx.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/3w-9xxx.c 2006-07-01 16:51:47.000000000 +0200
@@ -2122,7 +2122,7 @@ static int __devinit twa_probe(struct pc
TW_PARAM_PORTCOUNT, TW_PARAM_PORTCOUNT_LENGTH)));
/* Now setup the interrupt handler */
- retval = request_irq(pdev->irq, twa_interrupt, SA_SHIRQ, "3w-9xxx", tw_dev);
+ retval = request_irq(pdev->irq, twa_interrupt, IRQF_SHARED, "3w-9xxx", tw_dev);
if (retval) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x30, "Error requesting IRQ");
goto out_remove_host;
Index: linux-2.6.git/drivers/scsi/3w-xxxx.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/3w-xxxx.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/3w-xxxx.c 2006-07-01 16:51:47.000000000 +0200
@@ -2397,7 +2397,7 @@ static int __devinit tw_probe(struct pci
printk(KERN_WARNING "3w-xxxx: scsi%d: Found a 3ware Storage Controller at 0x%x, IRQ: %d.\n", host->host_no, tw_dev->base_addr, pdev->irq);
/* Now setup the interrupt handler */
- retval = request_irq(pdev->irq, tw_interrupt, SA_SHIRQ, "3w-xxxx", tw_dev);
+ retval = request_irq(pdev->irq, tw_interrupt, IRQF_SHARED, "3w-xxxx", tw_dev);
if (retval) {
printk(KERN_WARNING "3w-xxxx: Error requesting IRQ.");
goto out_remove_host;
Index: linux-2.6.git/drivers/scsi/53c7xx.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/53c7xx.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/53c7xx.c 2006-07-01 16:51:47.000000000 +0200
@@ -1070,7 +1070,7 @@ NCR53c7x0_init (struct Scsi_Host *host)
NCR53c7x0_driver_init (host);
- if (request_irq(host->irq, NCR53c7x0_intr, SA_SHIRQ, "53c7xx", host))
+ if (request_irq(host->irq, NCR53c7x0_intr, IRQF_SHARED, "53c7xx", host))
{
printk("scsi%d : IRQ%d not free, detaching\n",
host->host_no, host->irq);
@@ -4232,7 +4232,7 @@ restart:
* Purpose : handle NCR53c7x0 interrupts for all NCR devices sharing
* the same IRQ line.
*
- * Inputs : Since we're using the SA_INTERRUPT interrupt handler
+ * Inputs : Since we're using the IRQF_DISABLED interrupt handler
* semantics, irq indicates the interrupt which invoked
* this handler.
*
Index: linux-2.6.git/drivers/scsi/a100u2w.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/a100u2w.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/a100u2w.c 2006-07-01 16:51:47.000000000 +0200
@@ -1120,7 +1120,7 @@ static int __devinit inia100_probe_one(s
shost->sg_tablesize = TOTAL_SG_ENTRY;
/* Initial orc chip */
- error = request_irq(pdev->irq, inia100_intr, SA_SHIRQ,
+ error = request_irq(pdev->irq, inia100_intr, IRQF_SHARED,
"inia100", shost);
if (error < 0) {
printk(KERN_WARNING "inia100: unable to get irq %d\n",
Index: linux-2.6.git/drivers/scsi/a2091.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/a2091.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/a2091.c 2006-07-01 16:51:47.000000000 +0200
@@ -208,7 +208,7 @@ int __init a2091_detect(struct scsi_host
regs.SASR = &(DMA(instance)->SASR);
regs.SCMD = &(DMA(instance)->SCMD);
wd33c93_init(instance, regs, dma_setup, dma_stop, WD33C93_FS_8_10);
- request_irq(IRQ_AMIGA_PORTS, a2091_intr, SA_SHIRQ, "A2091 SCSI",
+ request_irq(IRQ_AMIGA_PORTS, a2091_intr, IRQF_SHARED, "A2091 SCSI",
instance);
DMA(instance)->CNTR = CNTR_PDMD | CNTR_INTEN;
num_a2091++;
Index: linux-2.6.git/drivers/scsi/a3000.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/a3000.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/a3000.c 2006-07-01 16:51:47.000000000 +0200
@@ -190,7 +190,7 @@ int __init a3000_detect(struct scsi_host
regs.SASR = &(DMA(a3000_host)->SASR);
regs.SCMD = &(DMA(a3000_host)->SCMD);
wd33c93_init(a3000_host, regs, dma_setup, dma_stop, WD33C93_FS_12_15);
- if (request_irq(IRQ_AMIGA_PORTS, a3000_intr, SA_SHIRQ, "A3000 SCSI",
+ if (request_irq(IRQ_AMIGA_PORTS, a3000_intr, IRQF_SHARED, "A3000 SCSI",
a3000_intr))
goto fail_irq;
DMA(a3000_host)->CNTR = CNTR_PDMD | CNTR_INTEN;
Index: linux-2.6.git/drivers/scsi/advansys.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/advansys.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/advansys.c 2006-07-01 16:51:47.000000000 +0200
@@ -371,7 +371,7 @@
1.5 (8/8/96):
1. Add support for ABP-940U (PCI Ultra) adapter.
- 2. Add support for IRQ sharing by setting the SA_SHIRQ flag for
+ 2. Add support for IRQ sharing by setting the IRQF_SHARED flag for
request_irq and supplying a dev_id pointer to both request_irq()
and free_irq().
3. In AscSearchIOPortAddr11() restore a call to check_region() which
@@ -504,9 +504,9 @@
3. For v2.1.93 and newer kernels use CONFIG_PCI and new PCI BIOS
access functions.
4. Update board serial number printing.
- 5. Try allocating an IRQ both with and without the SA_INTERRUPT
+ 5. Try allocating an IRQ both with and without the IRQF_DISABLED
flag set to allow IRQ sharing with drivers that do not set
- the SA_INTERRUPT flag. Also display a more descriptive error
+ the IRQF_DISABLED flag. Also display a more descriptive error
message if request_irq() fails.
6. Update to latest Asc and Adv Libraries.
@@ -5202,19 +5202,19 @@ advansys_detect(struct scsi_host_templat
/* Register IRQ Number. */
ASC_DBG1(2, "advansys_detect: request_irq() %d\n", shp->irq);
/*
- * If request_irq() fails with the SA_INTERRUPT flag set,
- * then try again without the SA_INTERRUPT flag set. This
+ * If request_irq() fails with the IRQF_DISABLED flag set,
+ * then try again without the IRQF_DISABLED flag set. This
* allows IRQ sharing to work even with other drivers that
- * do not set the SA_INTERRUPT flag.
+ * do not set the IRQF_DISABLED flag.
*
- * If SA_INTERRUPT is not set, then interrupts are enabled
+ * If IRQF_DISABLED is not set, then interrupts are enabled
* before the driver interrupt function is called.
*/
if (((ret = request_irq(shp->irq, advansys_interrupt,
- SA_INTERRUPT | (share_irq == TRUE ? SA_SHIRQ : 0),
+ IRQF_DISABLED | (share_irq == TRUE ? IRQF_SHARED : 0),
"advansys", boardp)) != 0) &&
((ret = request_irq(shp->irq, advansys_interrupt,
- (share_irq == TRUE ? SA_SHIRQ : 0),
+ (share_irq == TRUE ? IRQF_SHARED : 0),
"advansys", boardp)) != 0))
{
if (ret == -EBUSY) {
Index: linux-2.6.git/drivers/scsi/aha152x.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/aha152x.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/aha152x.c 2006-07-01 16:51:47.000000000 +0200
@@ -855,7 +855,7 @@ struct Scsi_Host *aha152x_probe_one(stru
SETPORT(SIMODE0, 0);
SETPORT(SIMODE1, 0);
- if( request_irq(shpnt->irq, swintr, SA_INTERRUPT|SA_SHIRQ, "aha152x", shpnt) ) {
+ if( request_irq(shpnt->irq, swintr, IRQF_DISABLED|IRQF_SHARED, "aha152x", shpnt) ) {
printk(KERN_ERR "aha152x%d: irq %d busy.\n", shpnt->host_no, shpnt->irq);
goto out_host_put;
}
@@ -889,7 +889,7 @@ struct Scsi_Host *aha152x_probe_one(stru
SETPORT(SSTAT0, 0x7f);
SETPORT(SSTAT1, 0xef);
- if ( request_irq(shpnt->irq, intr, SA_INTERRUPT|SA_SHIRQ, "aha152x", shpnt) ) {
+ if ( request_irq(shpnt->irq, intr, IRQF_DISABLED|IRQF_SHARED, "aha152x", shpnt) ) {
printk(KERN_ERR "aha152x%d: failed to reassign irq %d.\n", shpnt->host_no, shpnt->irq);
goto out_host_put;
}
Index: linux-2.6.git/drivers/scsi/aha1740.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/aha1740.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/aha1740.c 2006-07-01 16:51:47.000000000 +0200
@@ -634,7 +634,7 @@ static int aha1740_probe (struct device
}
DEB(printk("aha1740_probe: enable interrupt channel %d\n",irq_level));
- if (request_irq(irq_level,aha1740_intr_handle,irq_type ? 0 : SA_SHIRQ,
+ if (request_irq(irq_level,aha1740_intr_handle,irq_type ? 0 : IRQF_SHARED,
"aha1740",shpnt)) {
printk(KERN_ERR "aha1740_probe: Unable to allocate IRQ %d.\n",
irq_level);
Index: linux-2.6.git/drivers/scsi/ahci.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/ahci.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/ahci.c 2006-07-01 16:51:47.000000000 +0200
@@ -1371,7 +1371,7 @@ static int ahci_init_one (struct pci_dev
probe_ent->port_ops = ahci_port_info[board_idx].port_ops;
probe_ent->irq = pdev->irq;
- probe_ent->irq_flags = SA_SHIRQ;
+ probe_ent->irq_flags = IRQF_SHARED;
probe_ent->mmio_base = mmio_base;
probe_ent->private_data = hpriv;
Index: linux-2.6.git/drivers/scsi/aic7xxx_old.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/aic7xxx_old.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/aic7xxx_old.c 2006-07-01 16:51:47.000000000 +0200
@@ -8322,11 +8322,11 @@ aic7xxx_register(struct scsi_host_templa
}
else
{
- result = (request_irq(p->irq, do_aic7xxx_isr, SA_SHIRQ,
+ result = (request_irq(p->irq, do_aic7xxx_isr, IRQF_SHARED,
"aic7xxx", p));
if (result < 0)
{
- result = (request_irq(p->irq, do_aic7xxx_isr, SA_INTERRUPT | SA_SHIRQ,
+ result = (request_irq(p->irq, do_aic7xxx_isr, IRQF_DISABLED | IRQF_SHARED,
"aic7xxx", p));
}
}
Index: linux-2.6.git/drivers/scsi/atp870u.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/atp870u.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/atp870u.c 2006-07-01 16:51:47.000000000 +0200
@@ -2751,7 +2751,7 @@ flash_ok_880:
goto unregister;
}
- if (request_irq(pdev->irq, atp870u_intr_handle, SA_SHIRQ, "atp880i", shpnt)) {
+ if (request_irq(pdev->irq, atp870u_intr_handle, IRQF_SHARED, "atp880i", shpnt)) {
printk(KERN_ERR "Unable to allocate IRQ%d for Acard controller.\n", pdev->irq);
goto free_tables;
}
@@ -2822,7 +2822,7 @@ flash_ok_880:
#ifdef ED_DBGP
printk("request_irq() shpnt %p hostdata %p\n", shpnt, p);
#endif
- if (request_irq(pdev->irq, atp870u_intr_handle, SA_SHIRQ, "atp870u", shpnt)) {
+ if (request_irq(pdev->irq, atp870u_intr_handle, IRQF_SHARED, "atp870u", shpnt)) {
printk(KERN_ERR "Unable to allocate IRQ for Acard controller.\n");
goto free_tables;
}
@@ -3004,7 +3004,7 @@ flash_ok_885:
if (atp870u_init_tables(shpnt) < 0)
goto unregister;
- if (request_irq(pdev->irq, atp870u_intr_handle, SA_SHIRQ, "atp870i", shpnt)) {
+ if (request_irq(pdev->irq, atp870u_intr_handle, IRQF_SHARED, "atp870i", shpnt)) {
printk(KERN_ERR "Unable to allocate IRQ%d for Acard controller.\n", pdev->irq);
goto free_tables;
}
Index: linux-2.6.git/drivers/scsi/blz1230.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/blz1230.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/blz1230.c 2006-07-01 16:51:47.000000000 +0200
@@ -172,7 +172,7 @@ int __init blz1230_esp_detect(struct scs
esp->irq = IRQ_AMIGA_PORTS;
esp->slot = board+REAL_BLZ1230_ESP_ADDR;
- if (request_irq(IRQ_AMIGA_PORTS, esp_intr, SA_SHIRQ,
+ if (request_irq(IRQ_AMIGA_PORTS, esp_intr, IRQF_SHARED,
"Blizzard 1230 SCSI IV", esp->ehost))
goto err_out;
Index: linux-2.6.git/drivers/scsi/blz2060.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/blz2060.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/blz2060.c 2006-07-01 16:51:47.000000000 +0200
@@ -146,7 +146,7 @@ int __init blz2060_esp_detect(struct scs
esp->esp_command_dvma = virt_to_bus((void *)cmd_buffer);
esp->irq = IRQ_AMIGA_PORTS;
- request_irq(IRQ_AMIGA_PORTS, esp_intr, SA_SHIRQ,
+ request_irq(IRQ_AMIGA_PORTS, esp_intr, IRQF_SHARED,
"Blizzard 2060 SCSI", esp->ehost);
/* Figure out our scsi ID on the bus */
Index: linux-2.6.git/drivers/scsi/BusLogic.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/BusLogic.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/BusLogic.c 2006-07-01 16:51:47.000000000 +0200
@@ -1844,7 +1844,7 @@ static boolean __init BusLogic_AcquireRe
/*
Acquire shared access to the IRQ Channel.
*/
- if (request_irq(HostAdapter->IRQ_Channel, BusLogic_InterruptHandler, SA_SHIRQ, HostAdapter->FullModelName, HostAdapter) < 0) {
+ if (request_irq(HostAdapter->IRQ_Channel, BusLogic_InterruptHandler, IRQF_SHARED, HostAdapter->FullModelName, HostAdapter) < 0) {
BusLogic_Error("UNABLE TO ACQUIRE IRQ CHANNEL %d - DETACHING\n", HostAdapter, HostAdapter->IRQ_Channel);
return false;
}
Index: linux-2.6.git/drivers/scsi/cyberstorm.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/cyberstorm.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/cyberstorm.c 2006-07-01 16:51:47.000000000 +0200
@@ -172,7 +172,7 @@ int __init cyber_esp_detect(struct scsi_
esp->esp_command_dvma = virt_to_bus((void *)cmd_buffer);
esp->irq = IRQ_AMIGA_PORTS;
- request_irq(IRQ_AMIGA_PORTS, esp_intr, SA_SHIRQ,
+ request_irq(IRQ_AMIGA_PORTS, esp_intr, IRQF_SHARED,
"CyberStorm SCSI", esp->ehost);
/* Figure out our scsi ID on the bus */
/* The DMA cond flag contains a hardcoded jumper bit
Index: linux-2.6.git/drivers/scsi/cyberstormII.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/cyberstormII.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/cyberstormII.c 2006-07-01 16:51:47.000000000 +0200
@@ -153,7 +153,7 @@ int __init cyberII_esp_detect(struct scs
esp->esp_command_dvma = virt_to_bus((void *)cmd_buffer);
esp->irq = IRQ_AMIGA_PORTS;
- request_irq(IRQ_AMIGA_PORTS, esp_intr, SA_SHIRQ,
+ request_irq(IRQ_AMIGA_PORTS, esp_intr, IRQF_SHARED,
"CyberStorm SCSI Mk II", esp->ehost);
/* Figure out our scsi ID on the bus */
Index: linux-2.6.git/drivers/scsi/dc395x.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/dc395x.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/dc395x.c 2006-07-01 16:51:47.000000000 +0200
@@ -4562,7 +4562,7 @@ static int __devinit adapter_init(struct
acb->io_port_base = io_port;
acb->io_port_len = io_port_len;
- if (request_irq(irq, dc395x_interrupt, SA_SHIRQ, DC395X_NAME, acb)) {
+ if (request_irq(irq, dc395x_interrupt, IRQF_SHARED, DC395X_NAME, acb)) {
/* release the region we just claimed */
dprintkl(KERN_INFO, "Failed to register IRQ\n");
goto failed;
Index: linux-2.6.git/drivers/scsi/dec_esp.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/dec_esp.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/dec_esp.c 2006-07-01 16:51:47.000000000 +0200
@@ -202,19 +202,19 @@ static int dec_esp_detect(struct scsi_ho
esp_initialize(esp);
- if (request_irq(esp->irq, esp_intr, SA_INTERRUPT,
+ if (request_irq(esp->irq, esp_intr, IRQF_DISABLED,
"ncr53c94", esp->ehost))
goto err_dealloc;
if (request_irq(dec_interrupt[DEC_IRQ_ASC_MERR],
- scsi_dma_merr_int, SA_INTERRUPT,
+ scsi_dma_merr_int, IRQF_DISABLED,
"ncr53c94 error", esp->ehost))
goto err_free_irq;
if (request_irq(dec_interrupt[DEC_IRQ_ASC_ERR],
- scsi_dma_err_int, SA_INTERRUPT,
+ scsi_dma_err_int, IRQF_DISABLED,
"ncr53c94 overrun", esp->ehost))
goto err_free_irq_merr;
if (request_irq(dec_interrupt[DEC_IRQ_ASC_DMA],
- scsi_dma_int, SA_INTERRUPT,
+ scsi_dma_int, IRQF_DISABLED,
"ncr53c94 dma", esp->ehost))
goto err_free_irq_err;
@@ -276,7 +276,7 @@ static int dec_esp_detect(struct scsi_ho
esp->dma_mmu_release_scsi_sgl = 0;
esp->dma_advance_sg = 0;
- if (request_irq(esp->irq, esp_intr, SA_INTERRUPT,
+ if (request_irq(esp->irq, esp_intr, IRQF_DISABLED,
"PMAZ_AA", esp->ehost)) {
esp_deallocate(esp);
release_tc_card(slot);
Index: linux-2.6.git/drivers/scsi/dmx3191d.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/dmx3191d.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/dmx3191d.c 2006-07-01 16:51:47.000000000 +0200
@@ -94,7 +94,7 @@ static int __devinit dmx3191d_probe_one(
NCR5380_init(shost, FLAG_NO_PSEUDO_DMA | FLAG_DTC3181E);
- if (request_irq(pdev->irq, NCR5380_intr, SA_SHIRQ,
+ if (request_irq(pdev->irq, NCR5380_intr, IRQF_SHARED,
DMX3191D_DRIVER_NAME, shost)) {
/*
* Steam powered scsi controllers run without an IRQ anyway
Index: linux-2.6.git/drivers/scsi/dpt_i2o.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/dpt_i2o.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/dpt_i2o.c 2006-07-01 16:51:47.000000000 +0200
@@ -1009,7 +1009,7 @@ static int adpt_install_hba(struct scsi_
printk(KERN_INFO" BAR1 %p - size= %x\n",msg_addr_virt,hba_map1_area_size);
}
- if (request_irq (pDev->irq, adpt_isr, SA_SHIRQ, pHba->name, pHba)) {
+ if (request_irq (pDev->irq, adpt_isr, IRQF_SHARED, pHba->name, pHba)) {
printk(KERN_ERR"%s: Couldn't register IRQ %d\n", pHba->name, pDev->irq);
adpt_i2o_delete_hba(pHba);
return -EINVAL;
Index: linux-2.6.git/drivers/scsi/dtc.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/dtc.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/dtc.c 2006-07-01 16:51:47.000000000 +0200
@@ -280,7 +280,7 @@ found:
/* With interrupts enabled, it will sometimes hang when doing heavy
* reads. So better not enable them until I finger it out. */
if (instance->irq != SCSI_IRQ_NONE)
- if (request_irq(instance->irq, dtc_intr, SA_INTERRUPT, "dtc", instance)) {
+ if (request_irq(instance->irq, dtc_intr, IRQF_DISABLED, "dtc", instance)) {
printk(KERN_ERR "scsi%d : IRQ%d not free, interrupts disabled\n", instance->host_no, instance->irq);
instance->irq = SCSI_IRQ_NONE;
}
Index: linux-2.6.git/drivers/scsi/eata.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/eata.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/eata.c 2006-07-01 16:51:47.000000000 +0200
@@ -1221,7 +1221,7 @@ static int port_detect(unsigned long por
/* Board detected, allocate its IRQ */
if (request_irq(irq, do_interrupt_handler,
- SA_INTERRUPT | ((subversion == ESA) ? SA_SHIRQ : 0),
+ IRQF_DISABLED | ((subversion == ESA) ? IRQF_SHARED : 0),
driver_name, (void *)&sha[j])) {
printk("%s: unable to allocate IRQ %u, detaching.\n", name,
irq);
Index: linux-2.6.git/drivers/scsi/eata_pio.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/eata_pio.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/eata_pio.c 2006-07-01 16:51:47.000000000 +0200
@@ -731,7 +731,7 @@ static int register_pio_HBA(long base, s
return 0;
if (!reg_IRQ[gc->IRQ]) { /* Interrupt already registered ? */
- if (!request_irq(gc->IRQ, do_eata_pio_int_handler, SA_INTERRUPT, "EATA-PIO", sh)) {
+ if (!request_irq(gc->IRQ, do_eata_pio_int_handler, IRQF_DISABLED, "EATA-PIO", sh)) {
reg_IRQ[gc->IRQ]++;
if (!gc->IRQ_TR)
reg_IRQL[gc->IRQ] = 1; /* IRQ is edge triggered */
@@ -965,7 +965,7 @@ static int eata_pio_detect(struct scsi_h
for (i = 0; i <= MAXIRQ; i++)
if (reg_IRQ[i])
- request_irq(i, do_eata_pio_int_handler, SA_INTERRUPT, "EATA-PIO", NULL);
+ request_irq(i, do_eata_pio_int_handler, IRQF_DISABLED, "EATA-PIO", NULL);
HBA_ptr = first_HBA;
Index: linux-2.6.git/drivers/scsi/esp.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/esp.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/esp.c 2006-07-01 16:51:47.000000000 +0200
@@ -778,7 +778,7 @@ static int __init esp_register_irq(struc
* sanely maintain.
*/
if (request_irq(esp->ehost->irq, esp_intr,
- SA_SHIRQ, "ESP SCSI", esp)) {
+ IRQF_SHARED, "ESP SCSI", esp)) {
printk("esp%d: Cannot acquire irq line\n",
esp->esp_id);
return -1;
Index: linux-2.6.git/drivers/scsi/fastlane.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/fastlane.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/fastlane.c 2006-07-01 16:51:47.000000000 +0200
@@ -210,7 +210,7 @@ int __init fastlane_esp_detect(struct sc
esp->irq = IRQ_AMIGA_PORTS;
esp->slot = board+FASTLANE_ESP_ADDR;
- if (request_irq(IRQ_AMIGA_PORTS, esp_intr, SA_SHIRQ,
+ if (request_irq(IRQ_AMIGA_PORTS, esp_intr, IRQF_SHARED,
"Fastlane SCSI", esp->ehost)) {
printk(KERN_WARNING "Fastlane: Could not get IRQ%d, aborting.\n", IRQ_AMIGA_PORTS);
goto err_unmap;
Index: linux-2.6.git/drivers/scsi/fd_mcs.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/fd_mcs.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/fd_mcs.c 2006-07-01 16:51:47.000000000 +0200
@@ -400,7 +400,7 @@ static int fd_mcs_detect(struct scsi_hos
mca_set_adapter_name(slot - 1, fd_mcs_adapters[loop].name);
/* check irq/region */
- if (request_irq(irq, fd_mcs_intr, SA_SHIRQ, "fd_mcs", hosts)) {
+ if (request_irq(irq, fd_mcs_intr, IRQF_SHARED, "fd_mcs", hosts)) {
printk(KERN_ERR "fd_mcs: interrupt is not available, skipping...\n");
continue;
}
Index: linux-2.6.git/drivers/scsi/fdomain.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/fdomain.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/fdomain.c 2006-07-01 16:51:47.000000000 +0200
@@ -949,7 +949,7 @@ struct Scsi_Host *__fdomain_16x0_detect(
/* Register the IRQ with the kernel */
retcode = request_irq( interrupt_level,
- do_fdomain_16x0_intr, pdev?SA_SHIRQ:0, "fdomain", shpnt);
+ do_fdomain_16x0_intr, pdev?IRQF_SHARED:0, "fdomain", shpnt);
if (retcode < 0) {
if (retcode == -EINVAL) {
Index: linux-2.6.git/drivers/scsi/gdth.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/gdth.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/gdth.c 2006-07-01 16:51:47.000000000 +0200
@@ -4350,7 +4350,7 @@ static int __init gdth_detect(Scsi_Host_
printk("Configuring GDT-ISA HA at BIOS 0x%05X IRQ %u DRQ %u\n",
isa_bios,ha->irq,ha->drq);
- if (request_irq(ha->irq,gdth_interrupt,SA_INTERRUPT,"gdth",ha)) {
+ if (request_irq(ha->irq,gdth_interrupt,IRQF_DISABLED,"gdth",ha)) {
printk("GDT-ISA: Unable to allocate IRQ\n");
scsi_unregister(shp);
continue;
@@ -4476,7 +4476,7 @@ static int __init gdth_detect(Scsi_Host_
printk("Configuring GDT-EISA HA at Slot %d IRQ %u\n",
eisa_slot>>12,ha->irq);
- if (request_irq(ha->irq,gdth_interrupt,SA_INTERRUPT,"gdth",ha)) {
+ if (request_irq(ha->irq,gdth_interrupt,IRQF_DISABLED,"gdth",ha)) {
printk("GDT-EISA: Unable to allocate IRQ\n");
scsi_unregister(shp);
continue;
@@ -4603,7 +4603,7 @@ static int __init gdth_detect(Scsi_Host_
pcistr[ctr].bus,PCI_SLOT(pcistr[ctr].device_fn),ha->irq);
if (request_irq(ha->irq, gdth_interrupt,
- SA_INTERRUPT|SA_SHIRQ, "gdth", ha))
+ IRQF_DISABLED|IRQF_SHARED, "gdth", ha))
{
printk("GDT-PCI: Unable to allocate IRQ\n");
scsi_unregister(shp);
Index: linux-2.6.git/drivers/scsi/g_NCR5380.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/g_NCR5380.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/g_NCR5380.c 2006-07-01 16:51:47.000000000 +0200
@@ -461,7 +461,7 @@ int __init generic_NCR5380_detect(struct
instance->irq = NCR5380_probe_irq(instance, 0xffff);
if (instance->irq != SCSI_IRQ_NONE)
- if (request_irq(instance->irq, generic_NCR5380_intr, SA_INTERRUPT, "NCR5380", instance)) {
+ if (request_irq(instance->irq, generic_NCR5380_intr, IRQF_DISABLED, "NCR5380", instance)) {
printk(KERN_WARNING "scsi%d : IRQ%d not free, interrupts disabled\n", instance->host_no, instance->irq);
instance->irq = SCSI_IRQ_NONE;
}
Index: linux-2.6.git/drivers/scsi/gvp11.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/gvp11.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/gvp11.c 2006-07-01 16:51:47.000000000 +0200
@@ -328,7 +328,7 @@ int __init gvp11_detect(struct scsi_host
(epc & GVP_SCSICLKMASK) ? WD33C93_FS_8_10
: WD33C93_FS_12_15);
- request_irq(IRQ_AMIGA_PORTS, gvp11_intr, SA_SHIRQ, "GVP11 SCSI",
+ request_irq(IRQ_AMIGA_PORTS, gvp11_intr, IRQF_SHARED, "GVP11 SCSI",
instance);
DMA(instance)->CNTR = GVP11_DMAC_INT_ENABLE;
num_gvp11++;
Index: linux-2.6.git/drivers/scsi/hptiop.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/hptiop.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/hptiop.c 2006-07-01 16:51:47.000000000 +0200
@@ -1304,7 +1304,7 @@ static int __devinit hptiop_probe(struct
pci_set_drvdata(pcidev, host);
- if (request_irq(pcidev->irq, hptiop_intr, SA_SHIRQ,
+ if (request_irq(pcidev->irq, hptiop_intr, IRQF_SHARED,
driver_name, hba)) {
printk(KERN_ERR "scsi%d: request irq %d failed\n",
hba->host->host_no, pcidev->irq);
Index: linux-2.6.git/drivers/scsi/ibmmca.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/ibmmca.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/ibmmca.c 2006-07-01 16:51:47.000000000 +0200
@@ -1510,7 +1510,7 @@ int ibmmca_detect(struct scsi_host_templ
#endif
/* get interrupt request level */
- if (request_irq(IM_IRQ, interrupt_handler, SA_SHIRQ, "ibmmcascsi", hosts)) {
+ if (request_irq(IM_IRQ, interrupt_handler, IRQF_SHARED, "ibmmcascsi", hosts)) {
printk(KERN_ERR "IBM MCA SCSI: Unable to get shared IRQ %d.\n", IM_IRQ);
return 0;
} else
@@ -1635,7 +1635,7 @@ int ibmmca_detect(struct scsi_host_templ
/* IRQ11 is used by SCSI-2 F/W Adapter/A */
printk(KERN_DEBUG "IBM MCA SCSI: SCSI-2 F/W adapter needs IRQ 11.\n");
/* get interrupt request level */
- if (request_irq(IM_IRQ_FW, interrupt_handler, SA_SHIRQ, "ibmmcascsi", hosts)) {
+ if (request_irq(IM_IRQ_FW, interrupt_handler, IRQF_SHARED, "ibmmcascsi", hosts)) {
printk(KERN_ERR "IBM MCA SCSI: Unable to get shared IRQ %d.\n", IM_IRQ_FW);
} else
IRQ11_registered++;
@@ -1696,7 +1696,7 @@ int ibmmca_detect(struct scsi_host_templ
/* IRQ11 is used by SCSI-2 F/W Adapter/A */
printk(KERN_DEBUG "IBM MCA SCSI: SCSI-2 F/W adapter needs IRQ 11.\n");
/* get interrupt request level */
- if (request_irq(IM_IRQ_FW, interrupt_handler, SA_SHIRQ, "ibmmcascsi", hosts))
+ if (request_irq(IM_IRQ_FW, interrupt_handler, IRQF_SHARED, "ibmmcascsi", hosts))
printk(KERN_ERR "IBM MCA SCSI: Unable to get shared IRQ %d.\n", IM_IRQ_FW);
else
IRQ11_registered++;
Index: linux-2.6.git/drivers/scsi/in2000.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/in2000.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/in2000.c 2006-07-01 16:51:47.000000000 +0200
@@ -2015,7 +2015,7 @@ static int __init in2000_detect(struct s
write1_io(0, IO_FIFO_READ); /* start fifo out in read mode */
write1_io(0, IO_INTR_MASK); /* allow all ints */
x = int_tab[(switches & (SW_INT0 | SW_INT1)) >> SW_INT_SHIFT];
- if (request_irq(x, in2000_intr, SA_INTERRUPT, "in2000", instance)) {
+ if (request_irq(x, in2000_intr, IRQF_DISABLED, "in2000", instance)) {
printk("in2000_detect: Unable to allocate IRQ.\n");
detect_count--;
continue;
Index: linux-2.6.git/drivers/scsi/initio.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/initio.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/initio.c 2006-07-01 16:51:47.000000000 +0200
@@ -2867,7 +2867,7 @@ static int i91u_detect(struct scsi_host_
hreg->sg_tablesize = TOTAL_SG_ENTRY; /* Maximun support is 32 */
/* Initial tulip chip */
- ok = request_irq(pHCB->HCS_Intr, i91u_intr, SA_INTERRUPT | SA_SHIRQ, "i91u", hreg);
+ ok = request_irq(pHCB->HCS_Intr, i91u_intr, IRQF_DISABLED | IRQF_SHARED, "i91u", hreg);
if (ok < 0) {
printk(KERN_WARNING "i91u: unable to request IRQ %d\n\n", pHCB->HCS_Intr);
return 0;
Index: linux-2.6.git/drivers/scsi/ipr.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/ipr.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/ipr.c 2006-07-01 16:51:47.000000000 +0200
@@ -6428,7 +6428,7 @@ static int __devinit ipr_probe_ioa(struc
ioa_cfg->needs_hard_reset = 1;
ipr_mask_and_clear_interrupts(ioa_cfg, ~IPR_PCII_IOA_TRANS_TO_OPER);
- rc = request_irq(pdev->irq, ipr_isr, SA_SHIRQ, IPR_NAME, ioa_cfg);
+ rc = request_irq(pdev->irq, ipr_isr, IRQF_SHARED, IPR_NAME, ioa_cfg);
if (rc) {
dev_err(&pdev->dev, "Couldn't register IRQ %d! rc=%d\n",
Index: linux-2.6.git/drivers/scsi/ips.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/ips.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/ips.c 2006-07-01 16:51:47.000000000 +0200
@@ -7007,7 +7007,7 @@ ips_register_scsi(int index)
memcpy(ha, oldha, sizeof (ips_ha_t));
free_irq(oldha->irq, oldha);
/* Install the interrupt handler with the new ha */
- if (request_irq(ha->irq, do_ipsintr, SA_SHIRQ, ips_name, ha)) {
+ if (request_irq(ha->irq, do_ipsintr, IRQF_SHARED, ips_name, ha)) {
IPS_PRINTK(KERN_WARNING, ha->pcidev,
"Unable to install interrupt handler\n");
scsi_host_put(sh);
@@ -7419,7 +7419,7 @@ ips_init_phase2(int index)
}
/* Install the interrupt handler */
- if (request_irq(ha->irq, do_ipsintr, SA_SHIRQ, ips_name, ha)) {
+ if (request_irq(ha->irq, do_ipsintr, IRQF_SHARED, ips_name, ha)) {
IPS_PRINTK(KERN_WARNING, ha->pcidev,
"Unable to install interrupt handler\n");
return ips_abort_init(ha, index);
Index: linux-2.6.git/drivers/scsi/jazz_esp.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/jazz_esp.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/jazz_esp.c 2006-07-01 16:51:47.000000000 +0200
@@ -131,7 +131,7 @@ static int jazz_esp_detect(struct scsi_h
esp->esp_command_dvma = vdma_alloc(CPHYSADDR(cmd_buffer), sizeof (cmd_buffer));
esp->irq = JAZZ_SCSI_IRQ;
- request_irq(JAZZ_SCSI_IRQ, esp_intr, SA_INTERRUPT, "JAZZ SCSI",
+ request_irq(JAZZ_SCSI_IRQ, esp_intr, IRQF_DISABLED, "JAZZ SCSI",
esp->ehost);
/*
Index: linux-2.6.git/drivers/scsi/lasi700.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/lasi700.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/lasi700.c 2006-07-01 16:51:47.000000000 +0200
@@ -131,7 +131,7 @@ lasi700_probe(struct parisc_device *dev)
host->this_id = 7;
host->base = base;
host->irq = dev->irq;
- if(request_irq(dev->irq, NCR_700_intr, SA_SHIRQ, "lasi700", host)) {
+ if(request_irq(dev->irq, NCR_700_intr, IRQF_SHARED, "lasi700", host)) {
printk(KERN_ERR "lasi700: request_irq failed!\n");
goto out_put_host;
}
Index: linux-2.6.git/drivers/scsi/libata-bmdma.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/libata-bmdma.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/libata-bmdma.c 2006-07-01 16:51:47.000000000 +0200
@@ -853,7 +853,7 @@ ata_pci_init_native_mode(struct pci_dev
return NULL;
probe_ent->irq = pdev->irq;
- probe_ent->irq_flags = SA_SHIRQ;
+ probe_ent->irq_flags = IRQF_SHARED;
probe_ent->private_data = port[0]->private_data;
if (ports & ATA_PORT_PRIMARY) {
Index: linux-2.6.git/drivers/scsi/megaraid.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/megaraid.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/megaraid.c 2006-07-01 16:51:47.000000000 +0200
@@ -4714,7 +4714,7 @@ megaraid_probe_one(struct pci_dev *pdev,
if (request_irq(irq, (adapter->flag & BOARD_MEMMAP) ?
megaraid_isr_memmapped : megaraid_isr_iomapped,
- SA_SHIRQ, "megaraid", adapter)) {
+ IRQF_SHARED, "megaraid", adapter)) {
printk(KERN_WARNING
"megaraid: Couldn't register IRQ %d!\n", irq);
goto out_free_scb_list;
Index: linux-2.6.git/drivers/scsi/NCR5380.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/NCR5380.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/NCR5380.c 2006-07-01 16:51:47.000000000 +0200
@@ -585,7 +585,7 @@ static int __init NCR5380_probe_irq(stru
NCR5380_setup(instance);
for (trying_irqs = i = 0, mask = 1; i < 16; ++i, mask <<= 1)
- if ((mask & possible) && (request_irq(i, &probe_intr, SA_INTERRUPT, "NCR-probe", NULL) == 0))
+ if ((mask & possible) && (request_irq(i, &probe_intr, IRQF_DISABLED, "NCR-probe", NULL) == 0))
trying_irqs |= mask;
timeout = jiffies + (250 * HZ / 1000);
Index: linux-2.6.git/drivers/scsi/NCR_D700.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/NCR_D700.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/NCR_D700.c 2006-07-01 16:51:47.000000000 +0200
@@ -320,7 +320,7 @@ NCR_D700_probe(struct device *dev)
memset(p, '\0', sizeof(*p));
p->dev = dev;
snprintf(p->name, sizeof(p->name), "D700(%s)", dev->bus_id);
- if (request_irq(irq, NCR_D700_intr, SA_SHIRQ, p->name, p)) {
+ if (request_irq(irq, NCR_D700_intr, IRQF_SHARED, p->name, p)) {
printk(KERN_ERR "D700: request_irq failed\n");
kfree(p);
return -EBUSY;
Index: linux-2.6.git/drivers/scsi/NCR_Q720.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/NCR_Q720.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/NCR_Q720.c 2006-07-01 16:51:47.000000000 +0200
@@ -265,7 +265,7 @@ NCR_Q720_probe(struct device *dev)
p->irq = irq;
p->siops = siops;
- if (request_irq(irq, NCR_Q720_intr, SA_SHIRQ, "NCR_Q720", p)) {
+ if (request_irq(irq, NCR_Q720_intr, IRQF_SHARED, "NCR_Q720", p)) {
printk(KERN_ERR "NCR_Q720: request irq %d failed\n", irq);
goto out_release;
}
Index: linux-2.6.git/drivers/scsi/nsp32.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/nsp32.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/nsp32.c 2006-07-01 16:51:47.000000000 +0200
@@ -2867,7 +2867,7 @@ static int nsp32_detect(struct scsi_host
nsp32_do_bus_reset(data);
ret = request_irq(host->irq, do_nsp32_isr,
- SA_SHIRQ | SA_SAMPLE_RANDOM, "nsp32", data);
+ IRQF_SHARED | IRQF_SAMPLE_RANDOM, "nsp32", data);
if (ret < 0) {
nsp32_msg(KERN_ERR, "Unable to allocate IRQ for NinjaSCSI32 "
"SCSI PCI controller. Interrupt: %d", host->irq);
Index: linux-2.6.git/drivers/scsi/oktagon_esp.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/oktagon_esp.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/oktagon_esp.c 2006-07-01 16:51:47.000000000 +0200
@@ -197,7 +197,7 @@ int oktagon_esp_detect(struct scsi_host_
esp->esp_command_dvma = (__u32) cmd_buffer;
esp->irq = IRQ_AMIGA_PORTS;
- request_irq(IRQ_AMIGA_PORTS, esp_intr, SA_SHIRQ,
+ request_irq(IRQ_AMIGA_PORTS, esp_intr, IRQF_SHARED,
"BSC Oktagon SCSI", esp->ehost);
/* Figure out our scsi ID on the bus */
Index: linux-2.6.git/drivers/scsi/pas16.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/pas16.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/pas16.c 2006-07-01 16:51:47.000000000 +0200
@@ -454,7 +454,7 @@ int __init pas16_detect(struct scsi_host
instance->irq = NCR5380_probe_irq(instance, PAS16_IRQS);
if (instance->irq != SCSI_IRQ_NONE)
- if (request_irq(instance->irq, pas16_intr, SA_INTERRUPT, "pas16", instance)) {
+ if (request_irq(instance->irq, pas16_intr, IRQF_DISABLED, "pas16", instance)) {
printk("scsi%d : IRQ%d not free, interrupts disabled\n",
instance->host_no, instance->irq);
instance->irq = SCSI_IRQ_NONE;
Index: linux-2.6.git/drivers/scsi/pdc_adma.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/pdc_adma.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/pdc_adma.c 2006-07-01 16:51:47.000000000 +0200
@@ -690,7 +690,7 @@ static int adma_ata_init_one(struct pci_
probe_ent->port_ops = adma_port_info[board_idx].port_ops;
probe_ent->irq = pdev->irq;
- probe_ent->irq_flags = SA_SHIRQ;
+ probe_ent->irq_flags = IRQF_SHARED;
probe_ent->mmio_base = mmio_base;
probe_ent->n_ports = ADMA_PORTS;
Index: linux-2.6.git/drivers/scsi/qla1280.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/qla1280.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/qla1280.c 2006-07-01 16:51:47.000000000 +0200
@@ -192,7 +192,7 @@
- Don't walk the entire list in qla1280_putq_t() just to directly
grab the pointer to the last element afterwards
Rev 3.23.5 Beta August 9, 2001, Jes Sorensen
- - Don't use SA_INTERRUPT, it's use is deprecated for this kinda driver
+ - Don't use IRQF_DISABLED, it's use is deprecated for this kinda driver
Rev 3.23.4 Beta August 8, 2001, Jes Sorensen
- Set dev->max_sectors to 1024
Rev 3.23.3 Beta August 6, 2001, Jes Sorensen
@@ -4369,7 +4369,7 @@ qla1280_probe_one(struct pci_dev *pdev,
/* Disable ISP interrupts. */
qla1280_disable_intrs(ha);
- if (request_irq(pdev->irq, qla1280_intr_handler, SA_SHIRQ,
+ if (request_irq(pdev->irq, qla1280_intr_handler, IRQF_SHARED,
"qla1280", ha)) {
printk("qla1280 : Failed to reserve interrupt %d already "
"in use\n", pdev->irq);
Index: linux-2.6.git/drivers/scsi/qlogicpti.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/qlogicpti.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/qlogicpti.c 2006-07-01 16:51:47.000000000 +0200
@@ -718,7 +718,7 @@ static int __init qpti_register_irq(stru
* sanely maintain.
*/
if (request_irq(qpti->irq, qpti_intr,
- SA_SHIRQ, "Qlogic/PTI", qpti))
+ IRQF_SHARED, "Qlogic/PTI", qpti))
goto fail;
printk("qpti%d: IRQ %d ", qpti->qpti_id, qpti->irq);
Index: linux-2.6.git/drivers/scsi/sata_mv.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/sata_mv.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/sata_mv.c 2006-07-01 16:51:47.000000000 +0200
@@ -2395,7 +2395,7 @@ static int mv_init_one(struct pci_dev *p
probe_ent->port_ops = mv_port_info[board_idx].port_ops;
probe_ent->irq = pdev->irq;
- probe_ent->irq_flags = SA_SHIRQ;
+ probe_ent->irq_flags = IRQF_SHARED;
probe_ent->mmio_base = mmio_base;
probe_ent->private_data = hpriv;
Index: linux-2.6.git/drivers/scsi/sata_promise.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/sata_promise.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/sata_promise.c 2006-07-01 16:51:47.000000000 +0200
@@ -743,7 +743,7 @@ static int pdc_ata_init_one (struct pci_
probe_ent->port_ops = pdc_port_info[board_idx].port_ops;
probe_ent->irq = pdev->irq;
- probe_ent->irq_flags = SA_SHIRQ;
+ probe_ent->irq_flags = IRQF_SHARED;
probe_ent->mmio_base = mmio_base;
pdc_ata_setup_port(&probe_ent->port[0], base + 0x200);
Index: linux-2.6.git/drivers/scsi/sata_qstor.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/sata_qstor.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/sata_qstor.c 2006-07-01 16:51:47.000000000 +0200
@@ -680,7 +680,7 @@ static int qs_ata_init_one(struct pci_de
probe_ent->port_ops = qs_port_info[board_idx].port_ops;
probe_ent->irq = pdev->irq;
- probe_ent->irq_flags = SA_SHIRQ;
+ probe_ent->irq_flags = IRQF_SHARED;
probe_ent->mmio_base = mmio_base;
probe_ent->n_ports = QS_PORTS;
Index: linux-2.6.git/drivers/scsi/sata_sil24.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/sata_sil24.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/sata_sil24.c 2006-07-01 16:51:47.000000000 +0200
@@ -1041,7 +1041,7 @@ static int sil24_init_one(struct pci_dev
probe_ent->n_ports = SIL24_FLAG2NPORTS(pinfo->host_flags);
probe_ent->irq = pdev->irq;
- probe_ent->irq_flags = SA_SHIRQ;
+ probe_ent->irq_flags = IRQF_SHARED;
probe_ent->mmio_base = port_base;
probe_ent->private_data = hpriv;
Index: linux-2.6.git/drivers/scsi/sata_sil.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/sata_sil.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/sata_sil.c 2006-07-01 16:51:47.000000000 +0200
@@ -608,7 +608,7 @@ static int sil_init_one (struct pci_dev
probe_ent->mwdma_mask = sil_port_info[ent->driver_data].mwdma_mask;
probe_ent->udma_mask = sil_port_info[ent->driver_data].udma_mask;
probe_ent->irq = pdev->irq;
- probe_ent->irq_flags = SA_SHIRQ;
+ probe_ent->irq_flags = IRQF_SHARED;
probe_ent->host_flags = sil_port_info[ent->driver_data].host_flags;
mmio_base = pci_iomap(pdev, 5, 0);
Index: linux-2.6.git/drivers/scsi/sata_svw.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/sata_svw.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/sata_svw.c 2006-07-01 16:51:47.000000000 +0200
@@ -428,7 +428,7 @@ static int k2_sata_init_one (struct pci_
probe_ent->port_ops = &k2_sata_ops;
probe_ent->n_ports = 4;
probe_ent->irq = pdev->irq;
- probe_ent->irq_flags = SA_SHIRQ;
+ probe_ent->irq_flags = IRQF_SHARED;
probe_ent->mmio_base = mmio_base;
/* We don't care much about the PIO/UDMA masks, but the core won't like us
Index: linux-2.6.git/drivers/scsi/sata_sx4.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/sata_sx4.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/sata_sx4.c 2006-07-01 16:51:47.000000000 +0200
@@ -1436,7 +1436,7 @@ static int pdc_sata_init_one (struct pci
probe_ent->port_ops = pdc_port_info[board_idx].port_ops;
probe_ent->irq = pdev->irq;
- probe_ent->irq_flags = SA_SHIRQ;
+ probe_ent->irq_flags = IRQF_SHARED;
probe_ent->mmio_base = mmio_base;
probe_ent->private_data = hpriv;
Index: linux-2.6.git/drivers/scsi/sata_via.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/sata_via.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/sata_via.c 2006-07-01 16:51:47.000000000 +0200
@@ -242,7 +242,7 @@ static struct ata_probe_ent *vt6421_init
probe_ent->port_ops = &svia_sata_ops;
probe_ent->n_ports = N_PORTS;
probe_ent->irq = pdev->irq;
- probe_ent->irq_flags = SA_SHIRQ;
+ probe_ent->irq_flags = IRQF_SHARED;
probe_ent->pio_mask = 0x1f;
probe_ent->mwdma_mask = 0x07;
probe_ent->udma_mask = 0x7f;
Index: linux-2.6.git/drivers/scsi/sata_vsc.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/sata_vsc.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/sata_vsc.c 2006-07-01 16:51:47.000000000 +0200
@@ -400,7 +400,7 @@ static int __devinit vsc_sata_init_one (
probe_ent->port_ops = &vsc_sata_ops;
probe_ent->n_ports = 4;
probe_ent->irq = pdev->irq;
- probe_ent->irq_flags = SA_SHIRQ;
+ probe_ent->irq_flags = IRQF_SHARED;
probe_ent->mmio_base = mmio_base;
/* We don't care much about the PIO/UDMA masks, but the core won't like us
Index: linux-2.6.git/drivers/scsi/seagate.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/seagate.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/seagate.c 2006-07-01 16:51:47.000000000 +0200
@@ -497,7 +497,7 @@ int __init seagate_st0x_detect (struct s
return 0;
hostno = instance->host_no;
- if (request_irq (irq, do_seagate_reconnect_intr, SA_INTERRUPT, (controller_type == SEAGATE) ? "seagate" : "tmc-8xx", instance)) {
+ if (request_irq (irq, do_seagate_reconnect_intr, IRQF_DISABLED, (controller_type == SEAGATE) ? "seagate" : "tmc-8xx", instance)) {
printk(KERN_ERR "scsi%d : unable to allocate IRQ%d\n", hostno, irq);
return 0;
}
Index: linux-2.6.git/drivers/scsi/sim710.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/sim710.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/sim710.c 2006-07-01 16:51:47.000000000 +0200
@@ -133,7 +133,7 @@ sim710_probe_common(struct device *dev,
host->this_id = scsi_id;
host->base = base_addr;
host->irq = irq;
- if (request_irq(irq, NCR_700_intr, SA_SHIRQ, "sim710", host)) {
+ if (request_irq(irq, NCR_700_intr, IRQF_SHARED, "sim710", host)) {
printk(KERN_ERR "sim710: request_irq failed\n");
goto out_put_host;
}
Index: linux-2.6.git/drivers/scsi/sun3x_esp.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/sun3x_esp.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/sun3x_esp.c 2006-07-01 16:51:47.000000000 +0200
@@ -97,7 +97,7 @@ int sun3x_esp_detect(struct scsi_host_te
esp->esp_command_dvma = dvma_vtob((unsigned long)esp->esp_command);
esp->irq = 2;
- if (request_irq(esp->irq, esp_intr, SA_INTERRUPT,
+ if (request_irq(esp->irq, esp_intr, IRQF_DISABLED,
"SUN3X SCSI", esp->ehost)) {
esp_deallocate(esp);
return 0;
Index: linux-2.6.git/drivers/scsi/t128.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/t128.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/t128.c 2006-07-01 16:51:47.000000000 +0200
@@ -260,7 +260,7 @@ found:
instance->irq = NCR5380_probe_irq(instance, T128_IRQS);
if (instance->irq != SCSI_IRQ_NONE)
- if (request_irq(instance->irq, t128_intr, SA_INTERRUPT, "t128", instance)) {
+ if (request_irq(instance->irq, t128_intr, IRQF_DISABLED, "t128", instance)) {
printk("scsi%d : IRQ%d not free, interrupts disabled\n",
instance->host_no, instance->irq);
instance->irq = SCSI_IRQ_NONE;
Index: linux-2.6.git/drivers/scsi/tmscsim.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/tmscsim.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/tmscsim.c 2006-07-01 16:51:47.000000000 +0200
@@ -2584,7 +2584,7 @@ static int __devinit dc390_probe_one(str
/* Reset Pending INT */
DC390_read8_(INT_Status, io_port);
- if (request_irq(pdev->irq, do_DC390_Interrupt, SA_SHIRQ,
+ if (request_irq(pdev->irq, do_DC390_Interrupt, IRQF_SHARED,
"tmscsim", pACB)) {
printk(KERN_ERR "DC390: register IRQ error!\n");
goto out_release_region;
Index: linux-2.6.git/drivers/scsi/u14-34f.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/u14-34f.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/u14-34f.c 2006-07-01 16:51:47.000000000 +0200
@@ -872,7 +872,7 @@ static int port_detect \
/* Board detected, allocate its IRQ */
if (request_irq(irq, do_interrupt_handler,
- SA_INTERRUPT | ((subversion == ESA) ? SA_SHIRQ : 0),
+ IRQF_DISABLED | ((subversion == ESA) ? IRQF_SHARED : 0),
driver_name, (void *) &sha[j])) {
printk("%s: unable to allocate IRQ %u, detaching.\n", name, irq);
goto freelock;
Index: linux-2.6.git/drivers/scsi/wd7000.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/wd7000.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/wd7000.c 2006-07-01 16:51:47.000000000 +0200
@@ -1250,7 +1250,7 @@ static int wd7000_init(Adapter * host)
return 0;
- if (request_irq(host->irq, wd7000_intr, SA_INTERRUPT, "wd7000", host)) {
+ if (request_irq(host->irq, wd7000_intr, IRQF_DISABLED, "wd7000", host)) {
printk("wd7000_init: can't get IRQ %d.\n", host->irq);
return (0);
}
Index: linux-2.6.git/drivers/scsi/zalon.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/zalon.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/zalon.c 2006-07-01 16:51:47.000000000 +0200
@@ -136,7 +136,7 @@ zalon_probe(struct parisc_device *dev)
if (!host)
goto fail;
- if (request_irq(dev->irq, ncr53c8xx_intr, SA_SHIRQ, "zalon", host)) {
+ if (request_irq(dev->irq, ncr53c8xx_intr, IRQF_SHARED, "zalon", host)) {
printk(KERN_ERR "%s: irq problem with %d, detaching\n ",
dev->dev.bus_id, dev->irq);
goto fail;
Index: linux-2.6.git/drivers/scsi/aacraid/rkt.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/aacraid/rkt.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/aacraid/rkt.c 2006-07-01 16:51:47.000000000 +0200
@@ -453,7 +453,7 @@ int aac_rkt_init(struct aac_dev *dev)
}
msleep(1);
}
- if (request_irq(dev->scsi_host_ptr->irq, aac_rkt_intr, SA_SHIRQ|SA_INTERRUPT, "aacraid", (void *)dev)<0)
+ if (request_irq(dev->scsi_host_ptr->irq, aac_rkt_intr, IRQF_SHARED|IRQF_DISABLED, "aacraid", (void *)dev)<0)
{
printk(KERN_ERR "%s%d: Interrupt unavailable.\n", name, instance);
goto error_iounmap;
Index: linux-2.6.git/drivers/scsi/aacraid/rx.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/aacraid/rx.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/aacraid/rx.c 2006-07-01 16:51:47.000000000 +0200
@@ -453,7 +453,7 @@ int aac_rx_init(struct aac_dev *dev)
}
msleep(1);
}
- if (request_irq(dev->scsi_host_ptr->irq, aac_rx_intr, SA_SHIRQ|SA_INTERRUPT, "aacraid", (void *)dev)<0)
+ if (request_irq(dev->scsi_host_ptr->irq, aac_rx_intr, IRQF_SHARED|IRQF_DISABLED, "aacraid", (void *)dev)<0)
{
printk(KERN_ERR "%s%d: Interrupt unavailable.\n", name, instance);
goto error_iounmap;
Index: linux-2.6.git/drivers/scsi/aacraid/sa.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/aacraid/sa.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/aacraid/sa.c 2006-07-01 16:51:47.000000000 +0200
@@ -327,7 +327,7 @@ int aac_sa_init(struct aac_dev *dev)
msleep(1);
}
- if (request_irq(dev->scsi_host_ptr->irq, aac_sa_intr, SA_SHIRQ|SA_INTERRUPT, "aacraid", (void *)dev ) < 0) {
+ if (request_irq(dev->scsi_host_ptr->irq, aac_sa_intr, IRQF_SHARED|IRQF_DISABLED, "aacraid", (void *)dev ) < 0) {
printk(KERN_WARNING "%s%d: Interrupt unavailable.\n", name, instance);
goto error_iounmap;
}
Index: linux-2.6.git/drivers/scsi/aic7xxx/aic7770_osm.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/aic7xxx/aic7770_osm.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/aic7xxx/aic7770_osm.c 2006-07-01 16:51:47.000000000 +0200
@@ -65,7 +65,7 @@ aic7770_map_int(struct ahc_softc *ahc, u
shared = 0;
if ((ahc->flags & AHC_EDGE_INTERRUPT) == 0)
- shared = SA_SHIRQ;
+ shared = IRQF_SHARED;
error = request_irq(irq, ahc_linux_isr, shared, "aic7xxx", ahc);
if (error == 0)
Index: linux-2.6.git/drivers/scsi/aic7xxx/aic79xx_osm_pci.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/aic7xxx/aic79xx_osm_pci.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/aic7xxx/aic79xx_osm_pci.c 2006-07-01 16:51:47.000000000 +0200
@@ -342,7 +342,7 @@ ahd_pci_map_int(struct ahd_softc *ahd)
int error;
error = request_irq(ahd->dev_softc->irq, ahd_linux_isr,
- SA_SHIRQ, "aic79xx", ahd);
+ IRQF_SHARED, "aic79xx", ahd);
if (!error)
ahd->platform_data->irq = ahd->dev_softc->irq;
Index: linux-2.6.git/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c 2006-07-01 16:51:47.000000000 +0200
@@ -375,7 +375,7 @@ ahc_pci_map_int(struct ahc_softc *ahc)
int error;
error = request_irq(ahc->dev_softc->irq, ahc_linux_isr,
- SA_SHIRQ, "aic7xxx", ahc);
+ IRQF_SHARED, "aic7xxx", ahc);
if (error == 0)
ahc->platform_data->irq = ahc->dev_softc->irq;
Index: linux-2.6.git/drivers/scsi/arm/acornscsi.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/arm/acornscsi.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/arm/acornscsi.c 2006-07-01 16:51:47.000000000 +0200
@@ -3030,7 +3030,7 @@ acornscsi_probe(struct expansion_card *e
if (!request_region(host->io_port, 2048, "acornscsi(ram)"))
goto err_5;
- ret = request_irq(host->irq, acornscsi_intr, SA_INTERRUPT, "acornscsi", ashost);
+ ret = request_irq(host->irq, acornscsi_intr, IRQF_DISABLED, "acornscsi", ashost);
if (ret) {
printk(KERN_CRIT "scsi%d: IRQ%d not free: %d\n",
host->host_no, ashost->scsi.irq, ret);
Index: linux-2.6.git/drivers/scsi/arm/cumana_1.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/arm/cumana_1.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/arm/cumana_1.c 2006-07-01 16:51:47.000000000 +0200
@@ -277,7 +277,7 @@ cumanascsi1_probe(struct expansion_card
((struct NCR5380_hostdata *)host->hostdata)->ctrl = 0;
outb(0x00, host->io_port - 577);
- ret = request_irq(host->irq, cumanascsi_intr, SA_INTERRUPT,
+ ret = request_irq(host->irq, cumanascsi_intr, IRQF_DISABLED,
"CumanaSCSI-1", host);
if (ret) {
printk("scsi%d: IRQ%d not free: %d\n",
Index: linux-2.6.git/drivers/scsi/arm/cumana_2.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/arm/cumana_2.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/arm/cumana_2.c 2006-07-01 16:51:47.000000000 +0200
@@ -460,7 +460,7 @@ cumanascsi2_probe(struct expansion_card
goto out_free;
ret = request_irq(ec->irq, cumanascsi_2_intr,
- SA_INTERRUPT, "cumanascsi2", info);
+ IRQF_DISABLED, "cumanascsi2", info);
if (ret) {
printk("scsi%d: IRQ%d not free: %d\n",
host->host_no, ec->irq, ret);
Index: linux-2.6.git/drivers/scsi/arm/powertec.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/arm/powertec.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/arm/powertec.c 2006-07-01 16:51:47.000000000 +0200
@@ -373,7 +373,7 @@ powertecscsi_probe(struct expansion_card
goto out_free;
ret = request_irq(ec->irq, powertecscsi_intr,
- SA_INTERRUPT, "powertec", info);
+ IRQF_DISABLED, "powertec", info);
if (ret) {
printk("scsi%d: IRQ%d not free: %d\n",
host->host_no, ec->irq, ret);
Index: linux-2.6.git/drivers/scsi/lpfc/lpfc_init.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/lpfc/lpfc_init.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/lpfc/lpfc_init.c 2006-07-01 16:51:47.000000000 +0200
@@ -1620,7 +1620,7 @@ lpfc_pci_probe_one(struct pci_dev *pdev,
if (error)
goto out_remove_host;
- error = request_irq(phba->pcidev->irq, lpfc_intr_handler, SA_SHIRQ,
+ error = request_irq(phba->pcidev->irq, lpfc_intr_handler, IRQF_SHARED,
LPFC_DRIVER_NAME, phba);
if (error) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
Index: linux-2.6.git/drivers/scsi/megaraid/megaraid_mbox.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/megaraid/megaraid_mbox.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/megaraid/megaraid_mbox.c 2006-07-01 16:51:47.000000000 +0200
@@ -767,7 +767,7 @@ megaraid_init_mbox(adapter_t *adapter)
//
// request IRQ and register the interrupt service routine
- if (request_irq(adapter->irq, megaraid_isr, SA_SHIRQ, "megaraid",
+ if (request_irq(adapter->irq, megaraid_isr, IRQF_SHARED, "megaraid",
adapter)) {
con_log(CL_ANN, (KERN_WARNING
Index: linux-2.6.git/drivers/scsi/megaraid/megaraid_sas.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/megaraid/megaraid_sas.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/megaraid/megaraid_sas.c 2006-07-01 16:51:47.000000000 +0200
@@ -2191,7 +2191,7 @@ megasas_probe_one(struct pci_dev *pdev,
/*
* Register IRQ
*/
- if (request_irq(pdev->irq, megasas_isr, SA_SHIRQ, "megasas", instance)) {
+ if (request_irq(pdev->irq, megasas_isr, IRQF_SHARED, "megasas", instance)) {
printk(KERN_DEBUG "megasas: Failed to register IRQ\n");
goto fail_irq;
}
Index: linux-2.6.git/drivers/scsi/pcmcia/nsp_cs.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/pcmcia/nsp_cs.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/pcmcia/nsp_cs.c 2006-07-01 16:51:47.000000000 +0200
@@ -1623,7 +1623,7 @@ static int nsp_cs_probe(struct pcmcia_de
/* Interrupt handler */
link->irq.Handler = &nspintr;
link->irq.Instance = info;
- link->irq.Attributes |= (SA_SHIRQ | SA_SAMPLE_RANDOM);
+ link->irq.Attributes |= (IRQF_SHARED | IRQF_SAMPLE_RANDOM);
/* General socket configuration */
link->conf.Attributes = CONF_ENABLE_IRQ;
Index: linux-2.6.git/drivers/scsi/pcmcia/sym53c500_cs.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/pcmcia/sym53c500_cs.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/pcmcia/sym53c500_cs.c 2006-07-01 16:51:47.000000000 +0200
@@ -799,7 +799,7 @@ next_entry:
data = (struct sym53c500_data *)host->hostdata;
if (irq_level > 0) {
- if (request_irq(irq_level, SYM53C500_intr, SA_SHIRQ, "SYM53C500", host)) {
+ if (request_irq(irq_level, SYM53C500_intr, IRQF_SHARED, "SYM53C500", host)) {
printk("SYM53C500: unable to allocate IRQ %d\n", irq_level);
goto err_free_scsi;
}
Index: linux-2.6.git/drivers/scsi/qla2xxx/qla_os.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/qla2xxx/qla_os.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/qla2xxx/qla_os.c 2006-07-01 16:51:47.000000000 +0200
@@ -1541,7 +1541,7 @@ static int qla2x00_probe_one(struct pci_
host->transportt = qla2xxx_transport_template;
ret = request_irq(pdev->irq, ha->isp_ops.intr_handler,
- SA_INTERRUPT|SA_SHIRQ, QLA2XXX_DRIVER_NAME, ha);
+ IRQF_DISABLED|IRQF_SHARED, QLA2XXX_DRIVER_NAME, ha);
if (ret) {
qla_printk(KERN_WARNING, ha,
"Failed to reserve interrupt %d already in use.\n",
Index: linux-2.6.git/drivers/scsi/sym53c8xx_2/sym_glue.c
===================================================================
--- linux-2.6.git.orig/drivers/scsi/sym53c8xx_2/sym_glue.c 2006-07-01 16:51:12.000000000 +0200
+++ linux-2.6.git/drivers/scsi/sym53c8xx_2/sym_glue.c 2006-07-01 16:51:47.000000000 +0200
@@ -1547,7 +1547,7 @@ static struct Scsi_Host * __devinit sym_
* If we synchonize the C code with SCRIPTS on interrupt,
* we do not want to share the INTR line at all.
*/
- if (request_irq(pdev->irq, sym53c8xx_intr, SA_SHIRQ, NAME53C8XX, np)) {
+ if (request_irq(pdev->irq, sym53c8xx_intr, IRQF_SHARED, NAME53C8XX, np)) {
printf_err("%s: request irq %d failure\n",
sym_name(np), pdev->irq);
goto attach_failed;
--
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
