[PATCH 1/7] powerpc: Add mpc8360epb platform support

[Li Yang-r58472 <LeoLi@freescale.com>]

The patch adds mpc8360e MDS Processor Board support.

Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Yin Olivia <hong-hua.yin@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

---
 arch/powerpc/platforms/83xx/Kconfig       |   13 ++
 arch/powerpc/platforms/83xx/Makefile      |    1 
 arch/powerpc/platforms/83xx/mpc8360e_pb.c |  213 +++++++++++++++++++++++++++++
 arch/powerpc/platforms/83xx/mpc8360e_pb.h |   31 ++++
 4 files changed, 258 insertions(+), 0 deletions(-)

diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig
index 7675e67..04c4508 100644
--- a/arch/powerpc/platforms/83xx/Kconfig
+++ b/arch/powerpc/platforms/83xx/Kconfig
@@ -16,6 +16,13 @@ config MPC834x_SYS
 	  3 PCI slots.  The PIBs PCI initialization is the bootloader's
 	  responsiblilty.
 
+config MPC8360E_PB
+	bool "Freescale MPC8360E PB"
+	select DEFAULT_UIMAGE
+	select QUICC_ENGINE
+	help
+	  This option enables support for the MPC836x EMDS Processor Board.
+
 endchoice
 
 config MPC834x
@@ -24,4 +31,10 @@ config MPC834x
 	select PPC_INDIRECT_PCI
 	default y if MPC834x_SYS
 
+config MPC836x
+	bool
+	select PPC_UDBG_16550
+	select PPC_INDIRECT_PCI
+	default y if MPC8360E_PB
+
 endmenu
diff --git a/arch/powerpc/platforms/83xx/Makefile b/arch/powerpc/platforms/83xx/Makefile
index 5c72367..0c9ea5c 100644
--- a/arch/powerpc/platforms/83xx/Makefile
+++ b/arch/powerpc/platforms/83xx/Makefile
@@ -4,3 +4,4 @@ #
 obj-y				:= misc.o
 obj-$(CONFIG_PCI)		+= pci.o
 obj-$(CONFIG_MPC834x_SYS)	+= mpc834x_sys.o
+obj-$(CONFIG_MPC8360E_PB)	+= mpc8360e_pb.o
diff --git a/arch/powerpc/platforms/83xx/mpc8360e_pb.c b/arch/powerpc/platforms/83xx/mpc8360e_pb.c
new file mode 100644
index 0000000..b4ddb0a
--- /dev/null
+++ b/arch/powerpc/platforms/83xx/mpc8360e_pb.c
@@ -0,0 +1,213 @@
+/*
+ * Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved.
+ *
+ * Author: Li Yang <LeoLi@freescale.com>
+ *	   Yin Olivia <Hong-hua.Yin@freescale.com>
+ *
+ * Description:
+ * MPC8360E MDS PB board specific routines. 
+ *
+ * Changelog: 
+ * Jun 21, 2006	Initial version
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/major.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/initrd.h>
+
+#include <asm/system.h>
+#include <asm/atomic.h>
+#include <asm/time.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/ipic.h>
+#include <asm/bootinfo.h>
+#include <asm/irq.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <sysdev/fsl_soc.h>
+#ifdef CONFIG_QUICC_ENGINE
+#include <asm/immap_qe.h>
+#include <asm/qe_ic.h>
+#endif				/* CONFIG_QUICC_ENGINE */
+#include "mpc83xx.h"
+#include "mpc8360e_pb.h"
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(fmt...) udbg_printf(fmt)
+#else
+#define DBG(fmt...)
+#endif
+
+
+#ifndef CONFIG_PCI
+unsigned long isa_io_base = 0;
+unsigned long isa_mem_base = 0;
+#endif
+
+#ifdef CONFIG_QUICC_ENGINE
+extern void qe_reset(void);
+extern int par_io_of_config(struct device_node *np);
+#endif	/* CONFIG_QUICC_ENGINE */
+
+/* ************************************************************************
+ *
+ * Setup the architecture
+ *
+ */
+static void __init mpc8360_sys_setup_arch(void)
+{
+	struct device_node *np;
+	
+#ifdef CONFIG_QUICC_ENGINE
+	u8 *bcsr_regs;
+#endif
+
+	if (ppc_md.progress)
+		ppc_md.progress("mpc8360_sys_setup_arch()", 0);
+
+	np = of_find_node_by_type(NULL, "cpu");
+	if (np != 0) {
+		unsigned int *fp =
+		    (int *)get_property(np, "clock-frequency", NULL);
+		if (fp != 0)
+			loops_per_jiffy = *fp / HZ;
+		else
+			loops_per_jiffy = 50000000 / HZ;
+		of_node_put(np);
+	}
+#ifdef CONFIG_PCI
+	for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
+		add_bridge(np);
+
+	ppc_md.pci_swizzle = common_swizzle;
+	ppc_md.pci_exclude_device = mpc83xx_exclude_device;
+#endif
+
+#ifdef CONFIG_QUICC_ENGINE
+	qe_reset();
+
+	for (np = NULL; (np = of_find_node_by_name(np, "ucc")) != NULL;)
+		par_io_of_config(np);
+	
+	/* Reset the Ethernet PHY */
+	bcsr_regs = (u8 *) ioremap(BCSR_PHYS_ADDR, BCSR_SIZE);
+	bcsr_regs[9] &= ~0x20;
+	udelay(1000);
+	bcsr_regs[9] |= 0x20;
+	iounmap(bcsr_regs);
+
+#endif				/* CONFIG_QUICC_ENGINE */
+
+#ifdef CONFIG_BLK_DEV_INITRD
+	if (initrd_start)
+		ROOT_DEV = Root_RAM0;
+	else
+#endif
+#ifdef  CONFIG_ROOT_NFS
+		ROOT_DEV = Root_NFS;
+#else
+		ROOT_DEV = Root_HDA1;
+#endif
+}
+
+void __init mpc8360_sys_init_IRQ(void)
+{
+	u8 senses[8] = {
+		0,		/* EXT 0 */
+		IRQ_SENSE_LEVEL,	/* EXT 1 */
+		IRQ_SENSE_LEVEL,	/* EXT 2 */
+		0,		/* EXT 3 */
+#ifdef CONFIG_PCI
+		IRQ_SENSE_LEVEL,	/* EXT 4 */
+		IRQ_SENSE_LEVEL,	/* EXT 5 */
+		IRQ_SENSE_LEVEL,	/* EXT 6 */
+		IRQ_SENSE_LEVEL,	/* EXT 7 */
+#else
+		0,		/* EXT 4 */
+		0,		/* EXT 5 */
+		0,		/* EXT 6 */
+		0,		/* EXT 7 */
+#endif
+	};
+
+	ipic_init(get_immrbase() + 0x00700, 0, 0, senses, 8);
+
+	/* Initialize the default interrupt mapping priorities,
+	 * in case the boot rom changed something on us.
+	 */
+	ipic_set_default_priority();
+
+#ifdef CONFIG_QUICC_ENGINE
+	qe_ic_init(get_qe_base() + 0x00000080,
+		   (QE_IC_LOW_SIGNAL | QE_IC_HIGH_SIGNAL), QE_IRQ_OFFSET);
+#endif				/* CONFIG_QUICC_ENGINE */
+}
+
+#if defined(CONFIG_I2C_MPC) && defined(CONFIG_SENSORS_DS1374)
+extern ulong ds1374_get_rtc_time(void);
+extern int ds1374_set_rtc_time(ulong);
+
+static int __init mpc8360_rtc_hookup(void)
+{
+	struct timespec tv;
+
+	ppc_md.get_rtc_time = ds1374_get_rtc_time;
+	ppc_md.set_rtc_time = ds1374_set_rtc_time;
+
+	tv.tv_nsec = 0;
+	tv.tv_sec = (ppc_md.get_rtc_time) ();
+	do_settimeofday(&tv);
+
+	return 0;
+}
+
+late_initcall(mpc8360_rtc_hookup);
+#endif
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init mpc8360_sys_probe(void)
+{
+	char *model = of_get_flat_dt_prop(of_get_flat_dt_root(),
+					  "model", NULL);
+	if (model == NULL)
+		return 0;
+	if (strcmp(model, "MPC8360EPB"))
+		return 0;
+
+	DBG("MPC8360EMDS-PB found\n");
+
+	return 1;
+}
+
+define_machine(mpc8360_sys) {
+	.name 		= "MPC8360E PB",
+	.probe 		= mpc8360_sys_probe,
+	.setup_arch 	= mpc8360_sys_setup_arch,
+	.init_IRQ 	= mpc8360_sys_init_IRQ,
+	.get_irq 	= ipic_get_irq,
+	.restart 	= mpc83xx_restart,
+	.time_init 	= mpc83xx_time_init,
+	.calibrate_decr	= generic_calibrate_decr,
+	.progress 	= udbg_progress,
+};
diff --git a/arch/powerpc/platforms/83xx/mpc8360e_pb.h b/arch/powerpc/platforms/83xx/mpc8360e_pb.h
new file mode 100644
index 0000000..4243f4a
--- /dev/null
+++ b/arch/powerpc/platforms/83xx/mpc8360e_pb.h
@@ -0,0 +1,31 @@
+/*
+ * Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved.
+ *
+ * Author: Li Yang <LeoLi@freescale.com>
+ *	   Yin Olivia <Hong-hua.Yin@freescale.com>
+ *
+ * Description:
+ * MPC8360E MDS PB board specific header. 
+ *
+ * Changelog: 
+ * Jun 21, 2006	Initial version
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __MACH_MPC83XX_SYS_H__
+#define __MACH_MPC83XX_SYS_H__
+
+#define BCSR_PHYS_ADDR		((uint)0xf8000000)
+#define BCSR_SIZE		((uint)(32 * 1024))
+
+#define PIRQA	MPC83xx_IRQ_EXT4
+#define PIRQB	MPC83xx_IRQ_EXT5
+#define PIRQC	MPC83xx_IRQ_EXT6
+#define PIRQD	MPC83xx_IRQ_EXT7
+
+#endif				/* __MACH_MPC83XX_SYS_H__ */
 
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/