Re: [PATCH] use dev_printk() in some net drivers

[Jeff Garzik <jeff@garzik.org>]

Jiri Slaby wrote:
> Don't you consider to use s#dev_printk(KERN_ERR, #dev_err(# macro?

Done.

	Jeff


685aa11f7f1de42802cb0a8d5816c1efb08f65cd
diff --git a/drivers/net/8139cp.c b/drivers/net/8139cp.c
index c38e352..2f3fb2e 100644
--- a/drivers/net/8139cp.c
+++ b/drivers/net/8139cp.c
@@ -1837,11 +1837,10 @@ #endif
 
 	if (pdev->vendor == PCI_VENDOR_ID_REALTEK &&
 	    pdev->device == PCI_DEVICE_ID_REALTEK_8139 && pci_rev < 0x20) {
-		dev_printk(KERN_ERR, &pdev->dev,
+		dev_err(&pdev->dev,
 			   "This (id %04x:%04x rev %02x) is not an 8139C+ compatible chip\n",
 		           pdev->vendor, pdev->device, pci_rev);
-		dev_printk(KERN_ERR, &pdev->dev,
-			   "Try the \"8139too\" driver instead.\n");
+		dev_err(&pdev->dev, "Try the \"8139too\" driver instead.\n");
 		return -ENODEV;
 	}
 
@@ -1879,13 +1878,12 @@ #endif
 	pciaddr = pci_resource_start(pdev, 1);
 	if (!pciaddr) {
 		rc = -EIO;
-		dev_printk(KERN_ERR, &pdev->dev, "no MMIO resource\n");
+		dev_err(&pdev->dev, "no MMIO resource\n");
 		goto err_out_res;
 	}
 	if (pci_resource_len(pdev, 1) < CP_REGS_SIZE) {
 		rc = -EIO;
-		dev_printk(KERN_ERR, &pdev->dev,
-			   "MMIO resource (%lx) too small\n",
+		dev_err(&pdev->dev, "MMIO resource (%lx) too small\n",
 		       pci_resource_len(pdev, 1));
 		goto err_out_res;
 	}
@@ -1900,13 +1898,13 @@ #endif
 
 		rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
 		if (rc) {
-			dev_printk(KERN_ERR, &pdev->dev,
+			dev_err(&pdev->dev,
 				   "No usable DMA configuration, aborting.\n");
 			goto err_out_res;
 		}
 		rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
 		if (rc) {
-			dev_printk(KERN_ERR, &pdev->dev,
+			dev_err(&pdev->dev,
 				   "No usable consistent DMA configuration, "
 			           "aborting.\n");
 			goto err_out_res;
@@ -1919,8 +1917,7 @@ #endif
 	regs = ioremap(pciaddr, CP_REGS_SIZE);
 	if (!regs) {
 		rc = -EIO;
-		dev_printk(KERN_ERR, &pdev->dev,
-			   "Cannot map PCI MMIO (%lx@%lx)\n",
+		dev_err(&pdev->dev, "Cannot map PCI MMIO (%lx@%lx)\n",
 		       pci_resource_len(pdev, 1), pciaddr);
 		goto err_out_res;
 	}
diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c
index b2592c4..173e59e 100644
--- a/drivers/net/8139too.c
+++ b/drivers/net/8139too.c
@@ -769,8 +769,7 @@ static int __devinit rtl8139_init_board 
 	/* dev and priv zeroed in alloc_etherdev */
 	dev = alloc_etherdev (sizeof (*tp));
 	if (dev == NULL) {
-		dev_printk (KERN_ERR, &pdev->dev,
-			    "Unable to alloc new net device\n");
+		dev_err(&pdev->dev, "Unable to alloc new net device\n");
 		return -ENOMEM;
 	}
 	SET_MODULE_OWNER(dev);
@@ -802,29 +801,25 @@ static int __devinit rtl8139_init_board 
 #ifdef USE_IO_OPS
 	/* make sure PCI base addr 0 is PIO */
 	if (!(pio_flags & IORESOURCE_IO)) {
-		dev_printk (KERN_ERR, &pdev->dev,
-			    "region #0 not a PIO resource, aborting\n");
+		dev_err(&pdev->dev, "region #0 not a PIO resource, aborting\n");
 		rc = -ENODEV;
 		goto err_out;
 	}
 	/* check for weird/broken PCI region reporting */
 	if (pio_len < RTL_MIN_IO_SIZE) {
-		dev_printk (KERN_ERR, &pdev->dev,
-			    "Invalid PCI I/O region size(s), aborting\n");
+		dev_err(&pdev->dev, "Invalid PCI I/O region size(s), aborting\n");
 		rc = -ENODEV;
 		goto err_out;
 	}
 #else
 	/* make sure PCI base addr 1 is MMIO */
 	if (!(mmio_flags & IORESOURCE_MEM)) {
-		dev_printk (KERN_ERR, &pdev->dev,
-			    "region #1 not an MMIO resource, aborting\n");
+		dev_err(&pdev->dev, "region #1 not an MMIO resource, aborting\n");
 		rc = -ENODEV;
 		goto err_out;
 	}
 	if (mmio_len < RTL_MIN_IO_SIZE) {
-		dev_printk (KERN_ERR, &pdev->dev,
-			    "Invalid PCI mem region size(s), aborting\n");
+		dev_err(&pdev->dev, "Invalid PCI mem region size(s), aborting\n");
 		rc = -ENODEV;
 		goto err_out;
 	}
@@ -841,7 +836,7 @@ #endif
 #ifdef USE_IO_OPS
 	ioaddr = ioport_map(pio_start, pio_len);
 	if (!ioaddr) {
-		dev_printk (KERN_ERR, &pdev->dev, "cannot map PIO, aborting\n");
+		dev_err(&pdev->dev, "cannot map PIO, aborting\n");
 		rc = -EIO;
 		goto err_out;
 	}
@@ -852,8 +847,7 @@ #else
 	/* ioremap MMIO region */
 	ioaddr = pci_iomap(pdev, 1, 0);
 	if (ioaddr == NULL) {
-		dev_printk (KERN_ERR, &pdev->dev,
-			    "cannot remap MMIO, aborting\n");
+		dev_err(&pdev->dev, "cannot remap MMIO, aborting\n");
 		rc = -EIO;
 		goto err_out;
 	}
@@ -867,8 +861,7 @@ #endif /* USE_IO_OPS */
 
 	/* check for missing/broken hardware */
 	if (RTL_R32 (TxConfig) == 0xFFFFFFFF) {
-		dev_printk (KERN_ERR, &pdev->dev,
-			    "Chip not responding, ignoring board\n");
+		dev_err(&pdev->dev, "Chip not responding, ignoring board\n");
 		rc = -EIO;
 		goto err_out;
 	}
@@ -962,10 +955,10 @@ #endif
 
 	if (pdev->vendor == PCI_VENDOR_ID_REALTEK &&
 	    pdev->device == PCI_DEVICE_ID_REALTEK_8139 && pci_rev >= 0x20) {
-		dev_printk(KERN_INFO, &pdev->dev,
+		dev_info(&pdev->dev,
 			   "This (id %04x:%04x rev %02x) is an enhanced 8139C+ chip\n",
 		       	   pdev->vendor, pdev->device, pci_rev);
-		dev_printk(KERN_INFO, &pdev->dev,
+		dev_info(&pdev->dev,
 			   "Use the \"8139cp\" driver for improved performance and stability.\n");
 	}
 
diff --git a/drivers/net/b44.c b/drivers/net/b44.c
index 6d7748d..9fce7e6 100644
--- a/drivers/net/b44.c
+++ b/drivers/net/b44.c
@@ -2120,13 +2120,13 @@ static int __devinit b44_init_one(struct
 
 	err = pci_enable_device(pdev);
 	if (err) {
-		dev_printk(KERN_ERR, &pdev->dev, "Cannot enable PCI device, "
+		dev_err(&pdev->dev, "Cannot enable PCI device, "
 		       "aborting.\n");
 		return err;
 	}
 
 	if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
-		dev_printk(KERN_ERR, &pdev->dev,
+		dev_err(&pdev->dev,
 			"Cannot find proper PCI device "
 		       "base address, aborting.\n");
 		err = -ENODEV;
@@ -2135,7 +2135,7 @@ static int __devinit b44_init_one(struct
 
 	err = pci_request_regions(pdev, DRV_MODULE_NAME);
 	if (err) {
-		dev_printk(KERN_ERR, &pdev->dev,
+		dev_err(&pdev->dev,
 			"Cannot obtain PCI resources, aborting.\n");
 		goto err_out_disable_pdev;
 	}
@@ -2144,15 +2144,13 @@ static int __devinit b44_init_one(struct
 
 	err = pci_set_dma_mask(pdev, (u64) B44_DMA_MASK);
 	if (err) {
-		dev_printk(KERN_ERR, &pdev->dev,
-			"No usable DMA configuration, aborting.\n");
+		dev_err(&pdev->dev, "No usable DMA configuration, aborting.\n");
 		goto err_out_free_res;
 	}
 
 	err = pci_set_consistent_dma_mask(pdev, (u64) B44_DMA_MASK);
 	if (err) {
-		dev_printk(KERN_ERR, &pdev->dev,
-			"No usable DMA configuration, aborting.\n");
+		dev_err(&pdev->dev, "No usable DMA configuration, aborting.\n");
 		goto err_out_free_res;
 	}
 
@@ -2161,8 +2159,7 @@ static int __devinit b44_init_one(struct
 
 	dev = alloc_etherdev(sizeof(*bp));
 	if (!dev) {
-		dev_printk(KERN_ERR, &pdev->dev,
-			"Etherdev alloc failed, aborting.\n");
+		dev_err(&pdev->dev, "Etherdev alloc failed, aborting.\n");
 		err = -ENOMEM;
 		goto err_out_free_res;
 	}
@@ -2183,8 +2180,7 @@ static int __devinit b44_init_one(struct
 
 	bp->regs = ioremap(b44reg_base, b44reg_len);
 	if (bp->regs == 0UL) {
-		dev_printk(KERN_ERR, &pdev->dev, "Cannot map device registers, "
-		       "aborting.\n");
+		dev_err(&pdev->dev, "Cannot map device registers, aborting.\n");
 		err = -ENOMEM;
 		goto err_out_free_dev;
 	}
@@ -2214,7 +2210,7 @@ #endif
 
 	err = b44_get_invariants(bp);
 	if (err) {
-		dev_printk(KERN_ERR, &pdev->dev,
+		dev_err(&pdev->dev,
 			"Problem fetching invariants of chip, aborting.\n");
 		goto err_out_iounmap;
 	}
@@ -2235,8 +2231,7 @@ #endif
 
 	err = register_netdev(dev);
 	if (err) {
-		dev_printk(KERN_ERR, &pdev->dev, "Cannot register net device, "
-		       "aborting.\n");
+		dev_err(&pdev->dev, "Cannot register net device, aborting.\n");
 		goto err_out_iounmap;
 	}
 
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 171e498..152de92 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -5566,13 +5566,12 @@ bnx2_init_board(struct pci_dev *pdev, st
 	/* enable device (incl. PCI PM wakeup), and bus-mastering */
 	rc = pci_enable_device(pdev);
 	if (rc) {
-		dev_printk(KERN_ERR, &pdev->dev,
-			"Cannot enable PCI device, aborting.");
+		dev_err(&pdev->dev, "Cannot enable PCI device, aborting.");
 		goto err_out;
 	}
 
 	if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
-		dev_printk(KERN_ERR, &pdev->dev,
+		dev_err(&pdev->dev,
 			"Cannot find PCI device base address, aborting.\n");
 		rc = -ENODEV;
 		goto err_out_disable;
@@ -5580,8 +5579,7 @@ bnx2_init_board(struct pci_dev *pdev, st
 
 	rc = pci_request_regions(pdev, DRV_MODULE_NAME);
 	if (rc) {
-		dev_printk(KERN_ERR, &pdev->dev,
-			"Cannot obtain PCI resources, aborting.\n");
+		dev_err(&pdev->dev, "Cannot obtain PCI resources, aborting.\n");
 		goto err_out_disable;
 	}
 
@@ -5589,7 +5587,7 @@ bnx2_init_board(struct pci_dev *pdev, st
 
 	bp->pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM);
 	if (bp->pm_cap == 0) {
-		dev_printk(KERN_ERR, &pdev->dev,
+		dev_err(&pdev->dev,
 			"Cannot find power management capability, aborting.\n");
 		rc = -EIO;
 		goto err_out_release;
@@ -5597,8 +5595,7 @@ bnx2_init_board(struct pci_dev *pdev, st
 
 	bp->pcix_cap = pci_find_capability(pdev, PCI_CAP_ID_PCIX);
 	if (bp->pcix_cap == 0) {
-		dev_printk(KERN_ERR, &pdev->dev,
-			"Cannot find PCIX capability, aborting.\n");
+		dev_err(&pdev->dev, "Cannot find PCIX capability, aborting.\n");
 		rc = -EIO;
 		goto err_out_release;
 	}
@@ -5606,15 +5603,14 @@ bnx2_init_board(struct pci_dev *pdev, st
 	if (pci_set_dma_mask(pdev, DMA_64BIT_MASK) == 0) {
 		bp->flags |= USING_DAC_FLAG;
 		if (pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK) != 0) {
-			dev_printk(KERN_ERR, &pdev->dev,
+			dev_err(&pdev->dev,
 				"pci_set_consistent_dma_mask failed, aborting.\n");
 			rc = -EIO;
 			goto err_out_release;
 		}
 	}
 	else if (pci_set_dma_mask(pdev, DMA_32BIT_MASK) != 0) {
-		dev_printk(KERN_ERR, &pdev->dev,
-			"System does not support DMA, aborting.\n");
+		dev_err(&pdev->dev, "System does not support DMA, aborting.\n");
 		rc = -EIO;
 		goto err_out_release;
 	}
@@ -5634,8 +5630,7 @@ bnx2_init_board(struct pci_dev *pdev, st
 	bp->regview = ioremap_nocache(dev->base_addr, mem_len);
 
 	if (!bp->regview) {
-		dev_printk(KERN_ERR, &pdev->dev,
-			"Cannot map register space, aborting.\n");
+		dev_err(&pdev->dev, "Cannot map register space, aborting.\n");
 		rc = -ENOMEM;
 		goto err_out_release;
 	}
@@ -5707,7 +5702,7 @@ bnx2_init_board(struct pci_dev *pdev, st
 	else if ((CHIP_ID(bp) == CHIP_ID_5706_A1) &&
 		!(bp->flags & PCIX_FLAG)) {
 
-		dev_printk(KERN_ERR, &pdev->dev,
+		dev_err(&pdev->dev,
 			"5706 A1 can only be used in a PCIX bus, aborting.\n");
 		goto err_out_unmap;
 	}
@@ -5729,8 +5724,7 @@ bnx2_init_board(struct pci_dev *pdev, st
 
 	if ((reg & BNX2_DEV_INFO_SIGNATURE_MAGIC_MASK) !=
 	    BNX2_DEV_INFO_SIGNATURE_MAGIC) {
-		dev_printk(KERN_ERR, &pdev->dev,
-			"Firmware not running, aborting.\n");
+		dev_err(&pdev->dev, "Firmware not running, aborting.\n");
 		rc = -ENODEV;
 		goto err_out_unmap;
 	}
@@ -5892,8 +5886,7 @@ #if defined(HAVE_POLL_CONTROLLER) || def
 #endif
 
 	if ((rc = register_netdev(dev))) {
-		dev_printk(KERN_ERR, &pdev->dev,
-			"Cannot register net device\n");
+		dev_err(&pdev->dev, "Cannot register net device\n");
 		if (bp->regview)
 			iounmap(bp->regview);
 		pci_release_regions(pdev);
diff --git a/drivers/net/cassini.c b/drivers/net/cassini.c
index ccff239..79ea9db 100644
--- a/drivers/net/cassini.c
+++ b/drivers/net/cassini.c
@@ -4888,13 +4888,12 @@ static int __devinit cas_init_one(struct
 
 	err = pci_enable_device(pdev);
 	if (err) {
-		dev_printk(KERN_ERR, &pdev->dev, "Cannot enable PCI device, "
-		       "aborting.\n");
+		dev_err(&pdev->dev, "Cannot enable PCI device, aborting.\n");
 		return err;
 	}
 
 	if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
-		dev_printk(KERN_ERR, &pdev->dev, "Cannot find proper PCI device "
+		dev_err(&pdev->dev, "Cannot find proper PCI device "
 		       "base address, aborting.\n");
 		err = -ENODEV;
 		goto err_out_disable_pdev;
@@ -4902,7 +4901,7 @@ static int __devinit cas_init_one(struct
 
 	dev = alloc_etherdev(sizeof(*cp));
 	if (!dev) {
-		dev_printk(KERN_ERR, &pdev->dev, "Etherdev alloc failed, aborting.\n");
+		dev_err(&pdev->dev, "Etherdev alloc failed, aborting.\n");
 		err = -ENOMEM;
 		goto err_out_disable_pdev;
 	}
@@ -4911,8 +4910,7 @@ static int __devinit cas_init_one(struct
 
 	err = pci_request_regions(pdev, dev->name);
 	if (err) {
-		dev_printk(KERN_ERR, &pdev->dev, "Cannot obtain PCI resources, "
-		       "aborting.\n");
+		dev_err(&pdev->dev, "Cannot obtain PCI resources, aborting.\n");
 		goto err_out_free_netdev;
 	}
 	pci_set_master(pdev);
@@ -4942,7 +4940,7 @@ #if 1
 		if (pci_write_config_byte(pdev, 
 					  PCI_CACHE_LINE_SIZE, 
 					  cas_cacheline_size)) {
-			dev_printk(KERN_ERR, &pdev->dev, "Could not set PCI cache "
+			dev_err(&pdev->dev, "Could not set PCI cache "
 			       "line size\n");
 			goto err_write_cacheline;
 		}
@@ -4956,7 +4954,7 @@ #endif
 		err = pci_set_consistent_dma_mask(pdev,
 						  DMA_64BIT_MASK);
 		if (err < 0) {
-			dev_printk(KERN_ERR, &pdev->dev, "Unable to obtain 64-bit DMA "
+			dev_err(&pdev->dev, "Unable to obtain 64-bit DMA "
 			       "for consistent allocations\n");
 			goto err_out_free_res;
 		}
@@ -4964,7 +4962,7 @@ #endif
 	} else {
 		err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
 		if (err) {
-			dev_printk(KERN_ERR, &pdev->dev, "No usable DMA configuration, "
+			dev_err(&pdev->dev, "No usable DMA configuration, "
 			       "aborting.\n");
 			goto err_out_free_res;
 		}
@@ -5024,8 +5022,7 @@ #endif
 	/* give us access to cassini registers */
 	cp->regs = pci_iomap(pdev, 0, casreg_len);
 	if (cp->regs == 0UL) {
-		dev_printk(KERN_ERR, &pdev->dev, "Cannot map device registers, "
-		       "aborting.\n");
+		dev_err(&pdev->dev, "Cannot map device registers, aborting.\n");
 		goto err_out_free_res;
 	}
 	cp->casreg_len = casreg_len;
@@ -5041,8 +5038,7 @@ #endif
 		pci_alloc_consistent(pdev, sizeof(struct cas_init_block),
 				     &cp->block_dvma);
 	if (!cp->init_block) {
-		dev_printk(KERN_ERR, &pdev->dev, "Cannot allocate init block, "
-		       "aborting.\n");
+		dev_err(&pdev->dev, "Cannot allocate init block, aborting.\n");
 		goto err_out_iounmap;
 	}
 
@@ -5086,8 +5082,7 @@ #endif
 		dev->features |= NETIF_F_HIGHDMA;
 
 	if (register_netdev(dev)) {
-		dev_printk(KERN_ERR, &pdev->dev, "Cannot register net device, "
-		       "aborting.\n");
+		dev_err(&pdev->dev, "Cannot register net device, aborting.\n");
 		goto err_out_free_consistent;
 	}
 
diff --git a/drivers/net/eepro100.c b/drivers/net/eepro100.c
index 0b65a31..7795de6 100644
--- a/drivers/net/eepro100.c
+++ b/drivers/net/eepro100.c
@@ -556,14 +556,12 @@ #endif
 
 	if (!request_region(pci_resource_start(pdev, 1),
 			pci_resource_len(pdev, 1), "eepro100")) {
-		dev_printk (KERN_ERR, &pdev->dev,
-			"eepro100: cannot reserve I/O ports\n");
+		dev_err(&pdev->dev, "eepro100: cannot reserve I/O ports\n");
 		goto err_out_none;
 	}
 	if (!request_mem_region(pci_resource_start(pdev, 0),
 			pci_resource_len(pdev, 0), "eepro100")) {
-		dev_printk (KERN_ERR, &pdev->dev,
-			"eepro100: cannot reserve MMIO region\n");
+		dev_err(&pdev->dev, "eepro100: cannot reserve MMIO region\n");
 		goto err_out_free_pio_region;
 	}
 
@@ -576,7 +574,7 @@ #endif
 
 	ioaddr = pci_iomap(pdev, pci_bar, 0);
 	if (!ioaddr) {
-		dev_printk (KERN_ERR, &pdev->dev, "eepro100: cannot remap IO\n");
+		dev_err(&pdev->dev, "eepro100: cannot remap IO\n");
 		goto err_out_free_mmio_region;
 	}
 
diff --git a/drivers/net/epic100.c b/drivers/net/epic100.c
index 1ec06a5..7c1240d 100644
--- a/drivers/net/epic100.c
+++ b/drivers/net/epic100.c
@@ -336,7 +336,7 @@ #endif
 	irq = pdev->irq;
 
 	if (pci_resource_len(pdev, 0) < EPIC_TOTAL_SIZE) {
-		dev_printk(KERN_ERR, &pdev->dev, "no PCI region space\n");
+		dev_err(&pdev->dev, "no PCI region space\n");
 		ret = -ENODEV;
 		goto err_out_disable;
 	}
@@ -351,7 +351,7 @@ #endif
 
 	dev = alloc_etherdev(sizeof (*ep));
 	if (!dev) {
-		dev_printk(KERN_ERR, &pdev->dev, "no memory for eth device\n");
+		dev_err(&pdev->dev, "no memory for eth device\n");
 		goto err_out_free_res;
 	}
 	SET_MODULE_OWNER(dev);
@@ -363,7 +363,7 @@ #else
 	ioaddr = pci_resource_start (pdev, 1);
 	ioaddr = (long) ioremap (ioaddr, pci_resource_len (pdev, 1));
 	if (!ioaddr) {
-		dev_printk(KERN_ERR, &pdev->dev, "ioremap failed\n");
+		dev_err(&pdev->dev, "ioremap failed\n");
 		goto err_out_free_netdev;
 	}
 #endif
@@ -445,7 +445,7 @@ #endif
 			int mii_status = mdio_read(dev, phy, MII_BMSR);
 			if (mii_status != 0xffff  &&  mii_status != 0x0000) {
 				ep->phys[phy_idx++] = phy;
-				dev_printk(KERN_INFO, &pdev->dev,
+				dev_info(&pdev->dev,
 					"MII transceiver #%d control "
 					"%4.4x status %4.4x.\n",
 					phy, mdio_read(dev, phy, 0), mii_status);
@@ -455,12 +455,12 @@ #endif
 		if (phy_idx != 0) {
 			phy = ep->phys[0];
 			ep->mii.advertising = mdio_read(dev, phy, MII_ADVERTISE);
-			dev_printk(KERN_INFO, &pdev->dev,
+			dev_info(&pdev->dev,
 				"Autonegotiation advertising %4.4x link "
 				   "partner %4.4x.\n",
 				   ep->mii.advertising, mdio_read(dev, phy, 5));
 		} else if ( ! (ep->chip_flags & NO_MII)) {
-			dev_printk(KERN_WARNING, &pdev->dev,
+			dev_warn(&pdev->dev,
 				"***WARNING***: No MII transceiver found!\n");
 			/* Use the known PHY address of the EPII. */
 			ep->phys[0] = 3;
@@ -476,8 +476,7 @@ #endif
 	/* The lower four bits are the media type. */
 	if (duplex) {
 		ep->mii.force_media = ep->mii.full_duplex = 1;
-		dev_printk(KERN_INFO, &pdev->dev,
-			"Forced full duplex operation requested.\n");
+		dev_info(&pdev->dev, "Forced full duplex requested.\n");
 	}
 	dev->if_port = ep->default_port = option;
 
diff --git a/drivers/net/fealnx.c b/drivers/net/fealnx.c
index 9369082..e2955ee 100644
--- a/drivers/net/fealnx.c
+++ b/drivers/net/fealnx.c
@@ -505,7 +505,7 @@ #endif
 	
 	len = pci_resource_len(pdev, bar);
 	if (len < MIN_REGION_SIZE) {
-		dev_printk(KERN_ERR, &pdev->dev,
+		dev_err(&pdev->dev,
 			   "region size %ld too small, aborting\n", len);
 		return -ENODEV;
 	}
@@ -578,7 +578,7 @@ #endif
 
 			if (mii_status != 0xffff && mii_status != 0x0000) {
 				np->phys[phy_idx++] = phy;
-				dev_printk(KERN_INFO, &pdev->dev,
+				dev_info(&pdev->dev,
 				       "MII PHY found at address %d, status "
 				       "0x%4.4x.\n", phy, mii_status);
 				/* get phy type */
@@ -604,7 +604,7 @@ #endif
 
 		np->mii_cnt = phy_idx;
 		if (phy_idx == 0)
-			dev_printk(KERN_WARNING, &pdev->dev,
+			dev_warn(&pdev->dev,
 				"MII PHY not found -- this device may "
 			       "not operate correctly.\n");
 	} else {
@@ -632,8 +632,7 @@ #endif
 		np->mii.full_duplex = full_duplex[card_idx];
 
 	if (np->mii.full_duplex) {
-		dev_printk(KERN_INFO, &pdev->dev,
-			"Media type forced to Full Duplex.\n");
+		dev_info(&pdev->dev, "Media type forced to Full Duplex.\n");
 /* 89/6/13 add, (begin) */
 //      if (np->PHYType==MarvellPHY)
 		if ((np->PHYType == MarvellPHY) || (np->PHYType == LevelOnePHY)) {
diff --git a/drivers/net/ne2k-pci.c b/drivers/net/ne2k-pci.c
index b5bf53f..7b808da 100644
--- a/drivers/net/ne2k-pci.c
+++ b/drivers/net/ne2k-pci.c
@@ -231,14 +231,12 @@ #endif
 	irq = pdev->irq;
 
 	if (!ioaddr || ((pci_resource_flags (pdev, 0) & IORESOURCE_IO) == 0)) {
-		dev_printk (KERN_ERR, &pdev->dev,
-			"no I/O resource at PCI BAR #0\n");
+		dev_err(&pdev->dev, "no I/O resource at PCI BAR #0\n");
 		return -ENODEV;
 	}
 
 	if (request_region (ioaddr, NE_IO_EXTENT, DRV_NAME) == NULL) {
-		dev_printk (KERN_ERR, &pdev->dev,
-			"I/O resource 0x%x @ 0x%lx busy\n",
+		dev_err(&pdev->dev, "I/O resource 0x%x @ 0x%lx busy\n",
 			NE_IO_EXTENT, ioaddr);
 		return -EBUSY;
 	}
@@ -265,8 +263,7 @@ #endif
 	/* Allocate net_device, dev->priv; fill in 8390 specific dev fields. */
 	dev = alloc_ei_netdev();
 	if (!dev) {
-		dev_printk (KERN_ERR, &pdev->dev,
-			"cannot allocate ethernet device\n");
+		dev_err(&pdev->dev, "cannot allocate ethernet device\n");
 		goto err_out_free_res;
 	}
 	SET_MODULE_OWNER(dev);
@@ -284,7 +281,7 @@ #endif
 		while ((inb(ioaddr + EN0_ISR) & ENISR_RESET) == 0)
 			/* Limit wait: '2' avoids jiffy roll-over. */
 			if (jiffies - reset_start_time > 2) {
-				dev_printk(KERN_ERR, &pdev->dev,
+				dev_err(&pdev->dev,
 					"Card failure (no reset ack).\n");
 				goto err_out_free_netdev;
 			}
diff --git a/drivers/net/ns83820.c b/drivers/net/ns83820.c
index 916ec99..7ab2ab7 100644
--- a/drivers/net/ns83820.c
+++ b/drivers/net/ns83820.c
@@ -1833,8 +1833,7 @@ static int __devinit ns83820_init_one(st
 	} else if (!pci_set_dma_mask(pci_dev, DMA_32BIT_MASK)) {
 		using_dac = 0;
 	} else {
-		dev_printk(KERN_WARNING, &pci_dev->dev,
-			"pci_set_dma_mask failed!\n");
+		dev_warn(&pci_dev->dev, "pci_set_dma_mask failed!\n");
 		return -ENODEV;
 	}
 
@@ -1857,8 +1856,7 @@ static int __devinit ns83820_init_one(st
 
 	err = pci_enable_device(pci_dev);
 	if (err) {
-		dev_printk(KERN_INFO, &pci_dev->dev,
-			"pci_enable_dev failed: %d\n", err);
+		dev_info(&pci_dev->dev, "pci_enable_dev failed: %d\n", err);
 		goto out_free;
 	}
 
@@ -1887,8 +1885,7 @@ static int __devinit ns83820_init_one(st
 	err = request_irq(pci_dev->irq, ns83820_irq, SA_SHIRQ,
 			  DRV_NAME, ndev);
 	if (err) {
-		dev_printk(KERN_INFO, &pci_dev->dev,
-			"unable to register irq %d, err %d\n",
+		dev_info(&pci_dev->dev, "unable to register irq %d, err %d\n",
 			pci_dev->irq, err);
 		goto out_disable;
 	}
@@ -1903,8 +1900,7 @@ static int __devinit ns83820_init_one(st
 	rtnl_lock();
 	err = dev_alloc_name(ndev, ndev->name);
 	if (err < 0) {
-		dev_printk(KERN_INFO, &pci_dev->dev,
-			"unable to get netdev name: %d\n", err);
+		dev_info(&pci_dev->dev, "unable to get netdev name: %d\n", err);
 		goto out_free_irq;
 	}
 
diff --git a/drivers/net/pci-skeleton.c b/drivers/net/pci-skeleton.c
index 2754fad..71c1bfe 100644
--- a/drivers/net/pci-skeleton.c
+++ b/drivers/net/pci-skeleton.c
@@ -602,8 +602,7 @@ static int __devinit netdrv_init_board (
 	/* dev zeroed in alloc_etherdev */
 	dev = alloc_etherdev (sizeof (*tp));
 	if (dev == NULL) {
-		dev_printk (KERN_ERR, &pdev->dev,
-			    "unable to alloc new ethernet\n");
+		dev_err(&pdev->dev, "unable to alloc new ethernet\n");
 		DPRINTK ("EXIT, returning -ENOMEM\n");
 		return -ENOMEM;
 	}
@@ -633,16 +632,14 @@ static int __devinit netdrv_init_board (
 
 	/* make sure PCI base addr 0 is PIO */
 	if (!(pio_flags & IORESOURCE_IO)) {
-		dev_printk (KERN_ERR, &pdev->dev,
-			"region #0 not a PIO resource, aborting\n");
+		dev_err(&pdev->dev, "region #0 not a PIO resource, aborting\n");
 		rc = -ENODEV;
 		goto err_out;
 	}
 
 	/* make sure PCI base addr 1 is MMIO */
 	if (!(mmio_flags & IORESOURCE_MEM)) {
-		dev_printk (KERN_ERR, &pdev->dev,
-			"region #1 not an MMIO resource, aborting\n");
+		dev_err(&pdev->dev, "region #1 not an MMIO resource, aborting\n");
 		rc = -ENODEV;
 		goto err_out;
 	}
@@ -650,8 +647,7 @@ static int __devinit netdrv_init_board (
 	/* check for weird/broken PCI region reporting */
 	if ((pio_len < NETDRV_MIN_IO_SIZE) ||
 	    (mmio_len < NETDRV_MIN_IO_SIZE)) {
-		dev_printk (KERN_ERR, &pdev->dev,
-			"Invalid PCI region size(s), aborting\n");
+		dev_err(&pdev->dev, "Invalid PCI region size(s), aborting\n");
 		rc = -ENODEV;
 		goto err_out;
 	}
@@ -668,8 +664,7 @@ #else
 	/* ioremap MMIO region */
 	ioaddr = ioremap (mmio_start, mmio_len);
 	if (ioaddr == NULL) {
-		dev_printk (KERN_ERR, &pdev->dev,
-			"cannot remap MMIO, aborting\n");
+		dev_err(&pdev->dev, "cannot remap MMIO, aborting\n");
 		rc = -EIO;
 		goto err_out_free_res;
 	}
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index 24a5b31..a9d227f 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -1406,8 +1406,7 @@ rtl8169_init_board(struct pci_dev *pdev,
 	dev = alloc_etherdev(sizeof (*tp));
 	if (dev == NULL) {
 		if (netif_msg_drv(&debug))
-			dev_printk(KERN_ERR, &pdev->dev,
-				"unable to alloc new ethernet\n");
+			dev_err(&pdev->dev, "unable to alloc new ethernet\n");
 		goto err_out;
 	}
 
@@ -1420,7 +1419,7 @@ rtl8169_init_board(struct pci_dev *pdev,
 	rc = pci_enable_device(pdev);
 	if (rc < 0) {
 		if (netif_msg_probe(tp))
-			dev_printk(KERN_ERR, &pdev->dev, "enable failure\n");
+			dev_err(&pdev->dev, "enable failure\n");
 		goto err_out_free_dev;
 	}
 
@@ -1437,14 +1436,14 @@ rtl8169_init_board(struct pci_dev *pdev,
 		acpi_idle_state = pwr_command & PCI_PM_CTRL_STATE_MASK;
 	} else {
 		if (netif_msg_probe(tp))
-			dev_printk(KERN_ERR, &pdev->dev,
+			dev_err(&pdev->dev,
 			       "PowerManagement capability not found.\n");
 	}
 
 	/* make sure PCI base addr 1 is MMIO */
 	if (!(pci_resource_flags(pdev, 1) & IORESOURCE_MEM)) {
 		if (netif_msg_probe(tp))
-			dev_printk(KERN_ERR, &pdev->dev,
+			dev_err(&pdev->dev,
 			       "region #1 not an MMIO resource, aborting\n");
 		rc = -ENODEV;
 		goto err_out_mwi;
@@ -1452,7 +1451,7 @@ rtl8169_init_board(struct pci_dev *pdev,
 	/* check for weird/broken PCI region reporting */
 	if (pci_resource_len(pdev, 1) < R8169_REGS_SIZE) {
 		if (netif_msg_probe(tp))
-			dev_printk(KERN_ERR, &pdev->dev,
+			dev_err(&pdev->dev,
 			       "Invalid PCI region size(s), aborting\n");
 		rc = -ENODEV;
 		goto err_out_mwi;
@@ -1461,8 +1460,7 @@ rtl8169_init_board(struct pci_dev *pdev,
 	rc = pci_request_regions(pdev, MODULENAME);
 	if (rc < 0) {
 		if (netif_msg_probe(tp))
-			dev_printk(KERN_ERR, &pdev->dev,
-				"could not request regions.\n");
+			dev_err(&pdev->dev, "could not request regions.\n");
 		goto err_out_mwi;
 	}
 
@@ -1476,7 +1474,7 @@ rtl8169_init_board(struct pci_dev *pdev,
 		rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
 		if (rc < 0) {
 			if (netif_msg_probe(tp))
-				dev_printk(KERN_ERR, &pdev->dev,
+				dev_err(&pdev->dev,
 				       "DMA configuration failed.\n");
 			goto err_out_free_res;
 		}
@@ -1488,8 +1486,7 @@ rtl8169_init_board(struct pci_dev *pdev,
 	ioaddr = ioremap(pci_resource_start(pdev, 1), R8169_REGS_SIZE);
 	if (ioaddr == NULL) {
 		if (netif_msg_probe(tp))
-			dev_printk(KERN_ERR, &pdev->dev,
-				"cannot remap MMIO, aborting\n");
+			dev_err(&pdev->dev, "cannot remap MMIO, aborting\n");
 		rc = -EIO;
 		goto err_out_free_res;
 	}
diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c
index 7412400..b0cb56d 100644
--- a/drivers/net/via-velocity.c
+++ b/drivers/net/via-velocity.c
@@ -697,14 +697,14 @@ static int __devinit velocity_found1(str
 	 * can support more than MAX_UNITS.
 	 */
 	if (velocity_nics >= MAX_UNITS) {
-		dev_printk(KERN_NOTICE, &pdev->dev, "already found %d NICs.\n", 
+		dev_notice(&pdev->dev, "already found %d NICs.\n", 
 			   velocity_nics);
 		return -ENODEV;
 	}
 
 	dev = alloc_etherdev(sizeof(struct velocity_info));
 	if (!dev) {
-		dev_printk(KERN_ERR, &pdev->dev, "allocate net device failed.\n");
+		dev_err(&pdev->dev, "allocate net device failed.\n");
 		goto out;
 	}
 	
@@ -741,7 +741,7 @@ static int __devinit velocity_found1(str
 
 	ret = pci_request_regions(pdev, VELOCITY_NAME);
 	if (ret < 0) {
-		dev_printk(KERN_ERR, &pdev->dev, "No PCI resources.\n");
+		dev_err(&pdev->dev, "No PCI resources.\n");
 		goto err_disable;
 	}
 
@@ -897,19 +897,19 @@ static int __devinit velocity_get_pci_in
 	vptr->memaddr = pci_resource_start(pdev, 1);
 	
 	if (!(pci_resource_flags(pdev, 0) & IORESOURCE_IO)) {
-		dev_printk(KERN_ERR, &pdev->dev,
+		dev_err(&pdev->dev,
 			   "region #0 is not an I/O resource, aborting.\n");
 		return -EINVAL;
 	}
 
 	if ((pci_resource_flags(pdev, 1) & IORESOURCE_IO)) {
-		dev_printk(KERN_ERR, &pdev->dev,
+		dev_err(&pdev->dev,
 			   "region #1 is an I/O resource, aborting.\n");
 		return -EINVAL;
 	}
 
 	if (pci_resource_len(pdev, 1) < VELOCITY_IO_SIZE) {
-		dev_printk(KERN_ERR, &pdev->dev, "region #1 is too small.\n");
+		dev_err(&pdev->dev, "region #1 is too small.\n");
 		return -EINVAL;
 	}
 	vptr->pdev = pdev;