Just checked this into netdev-2.6.git#upstream...
Jeff
commit 5e4860c2f5dd64bdc9dedc657c246129659b5bbe
Author: Jeff Garzik <[email protected]>
Date: Tue Jun 27 09:25:28 2006 -0400
[netdrvr] via-velocity: remove io_size struct member, it is invariant
Replace io_size struct members with VELOCITY_IO_SIZE constant.
Also, constify chip_info_table[].
Signed-off-by: Jeff Garzik <[email protected]>
commit 8a8b0fe4ac1cf49e4d1f170de20bc1c91206dc9c
Author: Jeff Garzik <[email protected]>
Date: Tue Jun 27 09:20:08 2006 -0400
[netdrvr] via-velocity: misc. cleanups
- const-ify pci_device_id table
- clean up pci_device_id table with PCI_DEVICE()
- don't store internal pointer in pci_device_id table,
use pci_device_id::driver_data as an integer index
- use dev_printk() for messages where eth%d prefix is unavailable
- formatting fixes
Signed-off-by: Jeff Garzik <[email protected]>
commit d573eb578808b9531e50b38222c56cf8792b4d86
Author: Jeff Garzik <[email protected]>
Date: Tue Jun 27 09:12:38 2006 -0400
[netdrvr] minor cleanups in Becker-derived drivers
- fealnx: convert #define to enum
- fealnx, sundance: mark chip info table __devinitdata
- fealnx: use dev_printk() during probe
- fealnx: formatting cleanups
- starfire: remove obsolete comment
- sundance, via-rhine: add some whitespace where useful, in tables
- sundance: prefer "{ }" table terminator
- via-rhine: mark PCI probe table const
Signed-off-by: Jeff Garzik <[email protected]>
commit c66fdbba1d9c058ea4a93c2be84c142cd24710ad
Author: Jeff Garzik <[email protected]>
Date: Tue Jun 27 08:56:23 2006 -0400
[netdrvr] via-velocity: use netdev_priv() where appropriate
Signed-off-by: Jeff Garzik <[email protected]>
commit 61c874a20369c61840bbe70c77b8703a7e70834b
Author: Jeff Garzik <[email protected]>
Date: Tue Jun 27 08:54:34 2006 -0400
[netdrvr] Remove Becker-template 'io_size' member, when invariant
Becker-derived drivers often have the 'io_size' member in their chip
info struct, indicating the minimum required size of the I/O resource
(usually a PCI BAR). For many situations, this number is either
constant or irrelevant (due to pci_iomap convenience behavior).
This change removes the io_size invariant member, and replaces it with a
compile-time constant.
Drivers updated: fealnx, gt96100eth, winbond-840, yellowfin
Additionally,
- gt96100eth: unused 'drv_flags' removed from gt96100eth
- winbond-840: unused struct match_info removed
- winbond-840: mark pci_id_tbl[] const, __devinitdata
Signed-off-by: Jeff Garzik <[email protected]>
commit 5a60e801d0db1421e1f5753e96edd63975023ace
Author: Jeff Garzik <[email protected]>
Date: Tue Jun 27 07:57:22 2006 -0400
[netdrvr] Remove Linux-specific changelogs from several Becker template drivers
When in-kernel net drivers branched from Donald Becker's vanilla driver
set, in the days before BitKeeper and git, a driver changelog was
maintained in the driver source code. These days, the kernel's
changelog is far superior and much more accurate, so the in-driver
changelogs are removed.
Another relic of the Becker/kernel split was version numbering, using
"foo-LKx.y.z" notation, resulting in weird version numbers like
"1.17b-LK1.1.9". These drivers are for older hardware, and see few
changes these days, so the version numbers were all bumped to something
more simple.
Finally, in xircom_tulip_cb specifically, an additional cleanup removes
the always-enabled CARDBUS cpp macro.
Signed-off-by: Jeff Garzik <[email protected]>
commit 45d2b49000fa6cd65e2409bf7c121b374c4974cd
Author: Jeff Garzik <[email protected]>
Date: Tue Jun 27 07:38:33 2006 -0400
[netdrvr] epic100: minor cleanups
- Remove in-source changelog, it's in the global kernel history.
- convert silly and useless version to useful one
- replace invariant pci_id_tbl[]::io_size uses with EPIC_TOTAL_SIZE
- remove now-unused io_size member from pci_id_tbl[]
- current kernel style prefers dev_printk() for the rare ethernet driver
messages that cannot print an 'eth%d' prefix.
Signed-off-by: Jeff Garzik <[email protected]>
drivers/net/dl2k.c | 43 ------------
drivers/net/epic100.c | 71 ++------------------
drivers/net/fealnx.c | 20 +++--
drivers/net/gt96100eth.c | 3
drivers/net/gt96100eth.h | 2
drivers/net/hamachi.c | 13 ---
drivers/net/natsemi.c | 117 ----------------------------------
drivers/net/starfire.c | 123 ------------------------------------
drivers/net/sundance.c | 106 ++++---------------------------
drivers/net/tulip/winbond-840.c | 29 +++-----
drivers/net/tulip/xircom_tulip_cb.c | 27 +------
drivers/net/via-rhine.c | 121 ++---------------------------------
drivers/net/via-velocity.c | 102 ++++++++++++++---------------
drivers/net/via-velocity.h | 4 -
drivers/net/yellowfin.c | 39 ++---------
15 files changed, 132 insertions(+), 688 deletions(-)
diff --git a/drivers/net/dl2k.c b/drivers/net/dl2k.c
index 038447f..be997cb 100644
--- a/drivers/net/dl2k.c
+++ b/drivers/net/dl2k.c
@@ -9,49 +9,10 @@
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
*/
-/*
- Rev Date Description
- ==========================================================================
- 0.01 2001/05/03 Created DL2000-based linux driver
- 0.02 2001/05/21 Added VLAN and hardware checksum support.
- 1.00 2001/06/26 Added jumbo frame support.
- 1.01 2001/08/21 Added two parameters, rx_coalesce and rx_timeout.
- 1.02 2001/10/08 Supported fiber media.
- Added flow control parameters.
- 1.03 2001/10/12 Changed the default media to 1000mbps_fd for
- the fiber devices.
- 1.04 2001/11/08 Fixed Tx stopped when tx very busy.
- 1.05 2001/11/22 Fixed Tx stopped when unidirectional tx busy.
- 1.06 2001/12/13 Fixed disconnect bug at 10Mbps mode.
- Fixed tx_full flag incorrect.
- Added tx_coalesce paramter.
- 1.07 2002/01/03 Fixed miscount of RX frame error.
- 1.08 2002/01/17 Fixed the multicast bug.
- 1.09 2002/03/07 Move rx-poll-now to re-fill loop.
- Added rio_timer() to watch rx buffers.
- 1.10 2002/04/16 Fixed miscount of carrier error.
- 1.11 2002/05/23 Added ISR schedule scheme
- Fixed miscount of rx frame error for DGE-550SX.
- Fixed VLAN bug.
- 1.12 2002/06/13 Lock tx_coalesce=1 on 10/100Mbps mode.
- 1.13 2002/08/13 1. Fix disconnection (many tx:carrier/rx:frame
- errs) with some mainboards.
- 2. Use definition "DRV_NAME" "DRV_VERSION"
- "DRV_RELDATE" for flexibility.
- 1.14 2002/08/14 Support ethtool.
- 1.15 2002/08/27 Changed the default media to Auto-Negotiation
- for the fiber devices.
- 1.16 2002/09/04 More power down time for fiber devices auto-
- negotiation.
- Fix disconnect bug after ifup and ifdown.
- 1.17 2002/10/03 Fix RMON statistics overflow.
- Always use I/O mapping to access eeprom,
- avoid system freezing with some chipsets.
-*/
#define DRV_NAME "D-Link DL2000-based linux driver"
-#define DRV_VERSION "v1.17b"
-#define DRV_RELDATE "2006/03/10"
+#define DRV_VERSION "v1.18"
+#define DRV_RELDATE "2006/06/27"
#include "dl2k.h"
#include <linux/dma-mapping.h>
diff --git a/drivers/net/epic100.c b/drivers/net/epic100.c
index ee34a16..8dacd0d 100644
--- a/drivers/net/epic100.c
+++ b/drivers/net/epic100.c
@@ -19,62 +19,15 @@
Information and updates available at
http://www.scyld.com/network/epic100.html
+ [this link no longer provides anything useful -jgarzik]
---------------------------------------------------------------------
- Linux kernel-specific changes:
-
- LK1.1.2 (jgarzik):
- * Merge becker version 1.09 (4/08/2000)
-
- LK1.1.3:
- * Major bugfix to 1.09 driver (Francis Romieu)
-
- LK1.1.4 (jgarzik):
- * Merge becker test version 1.09 (5/29/2000)
-
- LK1.1.5:
- * Fix locking (jgarzik)
- * Limit 83c175 probe to ethernet-class PCI devices (rgooch)
-
- LK1.1.6:
- * Merge becker version 1.11
- * Move pci_enable_device before any PCI BAR len checks
-
- LK1.1.7:
- * { fill me in }
-
- LK1.1.8:
- * ethtool driver info support (jgarzik)
-
- LK1.1.9:
- * ethtool media get/set support (jgarzik)
-
- LK1.1.10:
- * revert MII transceiver init change (jgarzik)
-
- LK1.1.11:
- * implement ETHTOOL_[GS]SET, _NWAY_RST, _[GS]MSGLVL, _GLINK (jgarzik)
- * replace some MII-related magic numbers with constants
-
- LK1.1.12:
- * fix power-up sequence
-
- LK1.1.13:
- * revert version 1.1.12, power-up sequence "fix"
-
- LK1.1.14 (Kryzsztof Halasa):
- * fix spurious bad initializations
- * pound phy a la SMSC's app note on the subject
-
- AC1.1.14ac
- * fix power up/down for ethtool that broke in 1.11
-
*/
#define DRV_NAME "epic100"
-#define DRV_VERSION "1.11+LK1.1.14+AC1.1.14"
-#define DRV_RELDATE "June 2, 2004"
+#define DRV_VERSION "2.0"
+#define DRV_RELDATE "June 27, 2006"
/* The user-configurable values.
These may be modified when a driver module is loaded.*/
@@ -205,19 +158,15 @@ typedef enum {
struct epic_chip_info {
const char *name;
- int io_size; /* Needed for I/O region check or ioremap(). */
int drv_flags; /* Driver use, intended as capability flags. */
};
/* indexed by chip_t */
static const struct epic_chip_info pci_id_tbl[] = {
- { "SMSC EPIC/100 83c170",
- EPIC_TOTAL_SIZE, TYPE2_INTR | NO_MII | MII_PWRDWN },
- { "SMSC EPIC/100 83c170",
- EPIC_TOTAL_SIZE, TYPE2_INTR },
- { "SMSC EPIC/C 83c175",
- EPIC_TOTAL_SIZE, TYPE2_INTR | MII_PWRDWN },
+ { "SMSC EPIC/100 83c170", TYPE2_INTR | NO_MII | MII_PWRDWN },
+ { "SMSC EPIC/100 83c170", TYPE2_INTR },
+ { "SMSC EPIC/C 83c175", TYPE2_INTR | MII_PWRDWN },
};
@@ -386,8 +335,8 @@ #endif
goto out;
irq = pdev->irq;
- if (pci_resource_len(pdev, 0) < pci_id_tbl[chip_idx].io_size) {
- printk (KERN_ERR "card %d: no PCI region space\n", card_idx);
+ if (pci_resource_len(pdev, 0) < EPIC_TOTAL_SIZE) {
+ dev_printk(KERN_ERR, &pdev->dev, "no PCI region space\n");
ret = -ENODEV;
goto err_out_disable;
}
@@ -402,7 +351,7 @@ #endif
dev = alloc_etherdev(sizeof (*ep));
if (!dev) {
- printk (KERN_ERR "card %d: no memory for eth device\n", card_idx);
+ dev_printk(KERN_ERR, &pdev->dev, "no memory for eth device\n");
goto err_out_free_res;
}
SET_MODULE_OWNER(dev);
@@ -414,7 +363,7 @@ #else
ioaddr = pci_resource_start (pdev, 1);
ioaddr = (long) ioremap (ioaddr, pci_resource_len (pdev, 1));
if (!ioaddr) {
- printk (KERN_ERR DRV_NAME " %d: ioremap failed\n", card_idx);
+ dev_printk(KERN_ERR, &pdev->dev, "ioremap failed\n");
goto err_out_free_netdev;
}
#endif
diff --git a/drivers/net/fealnx.c b/drivers/net/fealnx.c
index 13eca7e..958ea51 100644
--- a/drivers/net/fealnx.c
+++ b/drivers/net/fealnx.c
@@ -124,7 +124,9 @@ MODULE_PARM_DESC(multicast_filter_limit,
MODULE_PARM_DESC(options, "fealnx: Bits 0-3: media type, bit 17: full duplex");
MODULE_PARM_DESC(full_duplex, "fealnx full duplex setting(s) (1)");
-#define MIN_REGION_SIZE 136
+enum {
+ MIN_REGION_SIZE = 136,
+};
/* A chip capabilities table, matching the entries in pci_tbl[] above. */
enum chip_capability_flags {
@@ -146,14 +148,13 @@ enum phy_type_flags {
struct chip_info {
char *chip_name;
- int io_size;
int flags;
};
-static const struct chip_info skel_netdrv_tbl[] = {
- {"100/10M Ethernet PCI Adapter", 136, HAS_MII_XCVR},
- {"100/10M Ethernet PCI Adapter", 136, HAS_CHIP_XCVR},
- {"1000/100/10M Ethernet PCI Adapter", 136, HAS_MII_XCVR},
+static const struct chip_info skel_netdrv_tbl[] __devinitdata = {
+ { "100/10M Ethernet PCI Adapter", HAS_MII_XCVR },
+ { "100/10M Ethernet PCI Adapter", HAS_CHIP_XCVR },
+ { "1000/100/10M Ethernet PCI Adapter", HAS_MII_XCVR },
};
/* Offsets to the Command and Status Registers. */
@@ -504,13 +505,14 @@ #endif
len = pci_resource_len(pdev, bar);
if (len < MIN_REGION_SIZE) {
- printk(KERN_ERR "%s: region size %ld too small, aborting\n",
- boardname, len);
+ dev_printk(KERN_ERR, &pdev->dev,
+ "region size %ld too small, aborting\n", len);
return -ENODEV;
}
i = pci_request_regions(pdev, boardname);
- if (i) return i;
+ if (i)
+ return i;
irq = pdev->irq;
diff --git a/drivers/net/gt96100eth.c b/drivers/net/gt96100eth.c
index 2d24354..243c9a5 100644
--- a/drivers/net/gt96100eth.c
+++ b/drivers/net/gt96100eth.c
@@ -699,7 +699,6 @@ static int __init gt96100_probe1(struct
memset(gp, 0, sizeof(*gp)); // clear it
gp->port_num = port_num;
- gp->io_size = GT96100_ETH_IO_SIZE;
gp->port_offset = port_num * GT96100_ETH_IO_SIZE;
gp->phy_addr = phy_addr;
gp->chip_rev = chip_rev;
@@ -1531,7 +1530,7 @@ static void gt96100_cleanup_module(void)
+ sizeof(gt96100_td_t) * TX_RING_SIZE,
gp->rx_ring);
free_netdev(gtif->dev);
- release_region(gtif->iobase, gp->io_size);
+ release_region(gtif->iobase, GT96100_ETH_IO_SIZE);
}
}
}
diff --git a/drivers/net/gt96100eth.h b/drivers/net/gt96100eth.h
index 395869c..cda81c9 100644
--- a/drivers/net/gt96100eth.h
+++ b/drivers/net/gt96100eth.h
@@ -332,7 +332,6 @@ struct gt96100_private {
mib_counters_t mib;
struct net_device_stats stats;
- int io_size;
int port_num; // 0 or 1
int chip_rev;
u32 port_offset;
@@ -341,7 +340,6 @@ struct gt96100_private {
u32 last_psr; // last value of the port status register
int options; /* User-settable misc. driver options. */
- int drv_flags;
struct timer_list timer;
spinlock_t lock; /* Serialise access to device */
};
diff --git a/drivers/net/hamachi.c b/drivers/net/hamachi.c
index 0ea4cb4..2b91099 100644
--- a/drivers/net/hamachi.c
+++ b/drivers/net/hamachi.c
@@ -20,22 +20,15 @@
Support and updates available at
http://www.scyld.com/network/hamachi.html
+ [link no longer provides useful info -jgarzik]
or
http://www.parl.clemson.edu/~keithu/hamachi.html
-
-
- Linux kernel changelog:
-
- LK1.0.1:
- - fix lack of pci_dev<->dev association
- - ethtool support (jgarzik)
-
*/
#define DRV_NAME "hamachi"
-#define DRV_VERSION "1.01+LK1.0.1"
-#define DRV_RELDATE "5/18/2001"
+#define DRV_VERSION "2.0"
+#define DRV_RELDATE "June 27, 2006"
/* A few user-configurable values. */
diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c
index 5657049..963377c 100644
--- a/drivers/net/natsemi.c
+++ b/drivers/net/natsemi.c
@@ -20,120 +20,9 @@
Support information and updates available at
http://www.scyld.com/network/netsemi.html
+ [link no longer provides useful info -jgarzik]
- Linux kernel modifications:
-
- Version 1.0.1:
- - Spinlock fixes
- - Bug fixes and better intr performance (Tjeerd)
- Version 1.0.2:
- - Now reads correct MAC address from eeprom
- Version 1.0.3:
- - Eliminate redundant priv->tx_full flag
- - Call netif_start_queue from dev->tx_timeout
- - wmb() in start_tx() to flush data
- - Update Tx locking
- - Clean up PCI enable (davej)
- Version 1.0.4:
- - Merge Donald Becker's natsemi.c version 1.07
- Version 1.0.5:
- - { fill me in }
- Version 1.0.6:
- * ethtool support (jgarzik)
- * Proper initialization of the card (which sometimes
- fails to occur and leaves the card in a non-functional
- state). (uzi)
-
- * Some documented register settings to optimize some
- of the 100Mbit autodetection circuitry in rev C cards. (uzi)
-
- * Polling of the PHY intr for stuff like link state
- change and auto- negotiation to finally work properly. (uzi)
-
- * One-liner removal of a duplicate declaration of
- netdev_error(). (uzi)
-
- Version 1.0.7: (Manfred Spraul)
- * pci dma
- * SMP locking update
- * full reset added into tx_timeout
- * correct multicast hash generation (both big and little endian)
- [copied from a natsemi driver version
- from Myrio Corporation, Greg Smith]
- * suspend/resume
-
- version 1.0.8 (Tim Hockin <[email protected]>)
- * ETHTOOL_* support
- * Wake on lan support (Erik Gilling)
- * MXDMA fixes for serverworks
- * EEPROM reload
-
- version 1.0.9 (Manfred Spraul)
- * Main change: fix lack of synchronize
- netif_close/netif_suspend against a last interrupt
- or packet.
- * do not enable superflous interrupts (e.g. the
- drivers relies on TxDone - TxIntr not needed)
- * wait that the hardware has really stopped in close
- and suspend.
- * workaround for the (at least) gcc-2.95.1 compiler
- problem. Also simplifies the code a bit.
- * disable_irq() in tx_timeout - needed to protect
- against rx interrupts.
- * stop the nic before switching into silent rx mode
- for wol (required according to docu).
-
- version 1.0.10:
- * use long for ee_addr (various)
- * print pointers properly (DaveM)
- * include asm/irq.h (?)
-
- version 1.0.11:
- * check and reset if PHY errors appear (Adrian Sun)
- * WoL cleanup (Tim Hockin)
- * Magic number cleanup (Tim Hockin)
- * Don't reload EEPROM on every reset (Tim Hockin)
- * Save and restore EEPROM state across reset (Tim Hockin)
- * MDIO Cleanup (Tim Hockin)
- * Reformat register offsets/bits (jgarzik)
-
- version 1.0.12:
- * ETHTOOL_* further support (Tim Hockin)
-
- version 1.0.13:
- * ETHTOOL_[G]EEPROM support (Tim Hockin)
-
- version 1.0.13:
- * crc cleanup (Matt Domsch <[email protected]>)
-
- version 1.0.14:
- * Cleanup some messages and autoneg in ethtool (Tim Hockin)
-
- version 1.0.15:
- * Get rid of cable_magic flag
- * use new (National provided) solution for cable magic issue
-
- version 1.0.16:
- * call netdev_rx() for RxErrors (Manfred Spraul)
- * formatting and cleanups
- * change options and full_duplex arrays to be zero
- initialized
- * enable only the WoL and PHY interrupts in wol mode
-
- version 1.0.17:
- * only do cable_magic on 83815 and early 83816 (Tim Hockin)
- * create a function for rx refill (Manfred Spraul)
- * combine drain_ring and init_ring (Manfred Spraul)
- * oom handling (Manfred Spraul)
- * hands_off instead of playing with netif_device_{de,a}ttach
- (Manfred Spraul)
- * be sure to write the MAC back to the chip (Manfred Spraul)
- * lengthen EEPROM timeout, and always warn about timeouts
- (Manfred Spraul)
- * comments update (Manfred)
- * do the right thing on a phy-reset (Manfred and Tim)
-
TODO:
* big endian support with CFG:BEM instead of cpu_to_le32
*/
@@ -166,8 +55,8 @@ #include <asm/irq.h>
#include <asm/uaccess.h>
#define DRV_NAME "natsemi"
-#define DRV_VERSION "1.07+LK1.0.17"
-#define DRV_RELDATE "Sep 27, 2002"
+#define DRV_VERSION "2.0"
+#define DRV_RELDATE "June 27, 2006"
#define RX_OFFSET 2
diff --git a/drivers/net/starfire.c b/drivers/net/starfire.c
index c158eed..e0f1aaf 100644
--- a/drivers/net/starfire.c
+++ b/drivers/net/starfire.c
@@ -22,129 +22,13 @@
Support and updates available at
http://www.scyld.com/network/starfire.html
+ [link no longer provides useful info -jgarzik]
- -----------------------------------------------------------
-
- Linux kernel-specific changes:
-
- LK1.1.1 (jgarzik):
- - Use PCI driver interface
- - Fix MOD_xxx races
- - softnet fixups
-
- LK1.1.2 (jgarzik):
- - Merge Becker version 0.15
-
- LK1.1.3 (Andrew Morton)
- - Timer cleanups
-
- LK1.1.4 (jgarzik):
- - Merge Becker version 1.03
-
- LK1.2.1 (Ion Badulescu <[email protected]>)
- - Support hardware Rx/Tx checksumming
- - Use the GFP firmware taken from Adaptec's Netware driver
-
- LK1.2.2 (Ion Badulescu)
- - Backported to 2.2.x
-
- LK1.2.3 (Ion Badulescu)
- - Fix the flaky mdio interface
- - More compat clean-ups
-
- LK1.2.4 (Ion Badulescu)
- - More 2.2.x initialization fixes
-
- LK1.2.5 (Ion Badulescu)
- - Several fixes from Manfred Spraul
-
- LK1.2.6 (Ion Badulescu)
- - Fixed ifup/ifdown/ifup problem in 2.4.x
-
- LK1.2.7 (Ion Badulescu)
- - Removed unused code
- - Made more functions static and __init
-
- LK1.2.8 (Ion Badulescu)
- - Quell bogus error messages, inform about the Tx threshold
- - Removed #ifdef CONFIG_PCI, this driver is PCI only
-
- LK1.2.9 (Ion Badulescu)
- - Merged Jeff Garzik's changes from 2.4.4-pre5
- - Added 2.2.x compatibility stuff required by the above changes
-
- LK1.2.9a (Ion Badulescu)
- - More updates from Jeff Garzik
-
- LK1.3.0 (Ion Badulescu)
- - Merged zerocopy support
-
- LK1.3.1 (Ion Badulescu)
- - Added ethtool support
- - Added GPIO (media change) interrupt support
-
- LK1.3.2 (Ion Badulescu)
- - Fixed 2.2.x compatibility issues introduced in 1.3.1
- - Fixed ethtool ioctl returning uninitialized memory
-
- LK1.3.3 (Ion Badulescu)
- - Initialize the TxMode register properly
- - Don't dereference dev->priv after freeing it
-
- LK1.3.4 (Ion Badulescu)
- - Fixed initialization timing problems
- - Fixed interrupt mask definitions
-
- LK1.3.5 (jgarzik)
- - ethtool NWAY_RST, GLINK, [GS]MSGLVL support
-
- LK1.3.6:
- - Sparc64 support and fixes (Ion Badulescu)
- - Better stats and error handling (Ion Badulescu)
- - Use new pci_set_mwi() PCI API function (jgarzik)
-
- LK1.3.7 (Ion Badulescu)
- - minimal implementation of tx_timeout()
- - correctly shutdown the Rx/Tx engines in netdev_close()
- - added calls to netif_carrier_on/off
- (patch from Stefan Rompf <[email protected]>)
- - VLAN support
-
- LK1.3.8 (Ion Badulescu)
- - adjust DMA burst size on sparc64
- - 64-bit support
- - reworked zerocopy support for 64-bit buffers
- - working and usable interrupt mitigation/latency
- - reduced Tx interrupt frequency for lower interrupt overhead
-
- LK1.3.9 (Ion Badulescu)
- - bugfix for mcast filter
- - enable the right kind of Tx interrupts (TxDMADone, not TxDone)
-
- LK1.4.0 (Ion Badulescu)
- - NAPI support
-
- LK1.4.1 (Ion Badulescu)
- - flush PCI posting buffers after disabling Rx interrupts
- - put the chip to a D3 slumber on driver unload
- - added config option to enable/disable NAPI
-
- LK1.4.2 (Ion Badulescu)
- - finally added firmware (GPL'ed by Adaptec)
- - removed compatibility code for 2.2.x
-
- LK1.4.2.1 (Ion Badulescu)
- - fixed 32/64 bit issues on i386 + CONFIG_HIGHMEM
- - added 32-bit padding to outgoing skb's, removed previous workaround
-
-TODO: - fix forced speed/duplexing code (broken a long time ago, when
- somebody converted the driver to use the generic MII code)
- - fix VLAN support
*/
#define DRV_NAME "starfire"
-#define DRV_VERSION "1.03+LK1.4.2.1"
-#define DRV_RELDATE "October 3, 2005"
+#define DRV_VERSION "2.0"
+#define DRV_RELDATE "June 27, 2006"
#include <linux/config.h>
#include <linux/module.h>
@@ -847,7 +731,6 @@ #endif
goto err_out_free_netdev;
}
- /* ioremap is borken in Linux-2.2.x/sparc64 */
base = ioremap(ioaddr, io_size);
if (!base) {
printk(KERN_ERR DRV_NAME " %d: cannot remap %#x @ %#lx, aborting\n",
diff --git a/drivers/net/sundance.c b/drivers/net/sundance.c
index f13b2a1..01ba7f8 100644
--- a/drivers/net/sundance.c
+++ b/drivers/net/sundance.c
@@ -16,91 +16,13 @@
Support and updates available at
http://www.scyld.com/network/sundance.html
+ [link no longer provides useful info -jgarzik]
-
- Version LK1.01a (jgarzik):
- - Replace some MII-related magic numbers with constants
-
- Version LK1.02 (D-Link):
- - Add new board to PCI ID list
- - Fix multicast bug
-
- Version LK1.03 (D-Link):
- - New Rx scheme, reduce Rx congestion
- - Option to disable flow control
-
- Version LK1.04 (D-Link):
- - Tx timeout recovery
- - More support for ethtool.
-
- Version LK1.04a:
- - Remove unused/constant members from struct pci_id_info
- (which then allows removal of 'drv_flags' from private struct)
- (jgarzik)
- - If no phy is found, fail to load that board (jgarzik)
- - Always start phy id scan at id 1 to avoid problems (Donald Becker)
- - Autodetect where mii_preable_required is needed,
- default to not needed. (Donald Becker)
-
- Version LK1.04b:
- - Remove mii_preamble_required module parameter (Donald Becker)
- - Add per-interface mii_preamble_required (setting is autodetected)
- (Donald Becker)
- - Remove unnecessary cast from void pointer (jgarzik)
- - Re-align comments in private struct (jgarzik)
-
- Version LK1.04c (jgarzik):
- - Support bitmapped message levels (NETIF_MSG_xxx), and the
- two ethtool ioctls that get/set them
- - Don't hand-code MII ethtool support, use standard API/lib
-
- Version LK1.04d:
- - Merge from Donald Becker's sundance.c: (Jason Lunz)
- * proper support for variably-sized MTUs
- * default to PIO, to fix chip bugs
- - Add missing unregister_netdev (Jason Lunz)
- - Add CONFIG_SUNDANCE_MMIO config option (jgarzik)
- - Better rx buf size calculation (Donald Becker)
-
- Version LK1.05 (D-Link):
- - Fix DFE-580TX packet drop issue (for DL10050C)
- - Fix reset_tx logic
-
- Version LK1.06 (D-Link):
- - Fix crash while unloading driver
-
- Versin LK1.06b (D-Link):
- - New tx scheme, adaptive tx_coalesce
-
- Version LK1.07 (D-Link):
- - Fix tx bugs in big-endian machines
- - Remove unused max_interrupt_work module parameter, the new
- NAPI-like rx scheme doesn't need it.
- - Remove redundancy get_stats() in intr_handler(), those
- I/O access could affect performance in ARM-based system
- - Add Linux software VLAN support
-
- Version LK1.08 (Philippe De Muyter [email protected]):
- - Fix bug of custom mac address
- (StationAddr register only accept word write)
-
- Version LK1.09 (D-Link):
- - Fix the flowctrl bug.
- - Set Pause bit in MII ANAR if flow control enabled.
-
- Version LK1.09a (ICPlus):
- - Add the delay time in reading the contents of EEPROM
-
- Version LK1.10 (Philippe De Muyter [email protected]):
- - Make 'unblock interface after Tx underrun' work
-
- Version LK1.11 (Pedro Alejandro Lopez-Valencia palopezv at gmail.com):
- - Add support for IC Plus Corporation IP100A chipset
*/
#define DRV_NAME "sundance"
-#define DRV_VERSION "1.01+LK1.11"
-#define DRV_RELDATE "14-Jun-2006"
+#define DRV_VERSION "1.1"
+#define DRV_RELDATE "27-Jun-2006"
/* The user-configurable values.
@@ -282,15 +204,15 @@ #ifndef CONFIG_SUNDANCE_MMIO
#define USE_IO_OPS 1
#endif
-static struct pci_device_id sundance_pci_tbl[] = {
- {0x1186, 0x1002, 0x1186, 0x1002, 0, 0, 0},
- {0x1186, 0x1002, 0x1186, 0x1003, 0, 0, 1},
- {0x1186, 0x1002, 0x1186, 0x1012, 0, 0, 2},
- {0x1186, 0x1002, 0x1186, 0x1040, 0, 0, 3},
- {0x1186, 0x1002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4},
- {0x13F0, 0x0201, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5},
- {0x13F0, 0x0200, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 6},
- {0,}
+static const struct pci_device_id sundance_pci_tbl[] = {
+ { 0x1186, 0x1002, 0x1186, 0x1002, 0, 0, 0 },
+ { 0x1186, 0x1002, 0x1186, 0x1003, 0, 0, 1 },
+ { 0x1186, 0x1002, 0x1186, 0x1012, 0, 0, 2 },
+ { 0x1186, 0x1002, 0x1186, 0x1040, 0, 0, 3 },
+ { 0x1186, 0x1002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4 },
+ { 0x13F0, 0x0201, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5 },
+ { 0x13F0, 0x0200, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 6 },
+ { }
};
MODULE_DEVICE_TABLE(pci, sundance_pci_tbl);
@@ -301,7 +223,7 @@ enum {
struct pci_id_info {
const char *name;
};
-static const struct pci_id_info pci_id_tbl[] = {
+static const struct pci_id_info pci_id_tbl[] __devinitdata = {
{"D-Link DFE-550TX FAST Ethernet Adapter"},
{"D-Link DFE-550FX 100Mbps Fiber-optics Adapter"},
{"D-Link DFE-580TX 4 port Server Adapter"},
@@ -309,7 +231,7 @@ static const struct pci_id_info pci_id_t
{"D-Link DL10050-based FAST Ethernet Adapter"},
{"Sundance Technology Alta"},
{"IC Plus Corporation IP100A FAST Ethernet Adapter"},
- {NULL,}, /* 0 terminated list. */
+ { } /* terminate list. */
};
/* This driver was written to use PCI memory space, however x86-oriented
diff --git a/drivers/net/tulip/winbond-840.c b/drivers/net/tulip/winbond-840.c
index 602a6e5..a1e3159 100644
--- a/drivers/net/tulip/winbond-840.c
+++ b/drivers/net/tulip/winbond-840.c
@@ -224,24 +224,21 @@ static const struct pci_device_id w840_p
};
MODULE_DEVICE_TABLE(pci, w840_pci_tbl);
+enum {
+ netdev_res_size = 128, /* size of PCI BAR resource */
+};
+
struct pci_id_info {
const char *name;
- struct match_info {
- int pci, pci_mask, subsystem, subsystem_mask;
- int revision, revision_mask; /* Only 8 bits. */
- } id;
- int io_size; /* Needed for I/O region check or ioremap(). */
- int drv_flags; /* Driver use, intended as capability flags. */
+ int drv_flags; /* Driver use, intended as capability flags. */
};
-static struct pci_id_info pci_id_tbl[] = {
- {"Winbond W89c840", /* Sometime a Level-One switch card. */
- { 0x08401050, 0xffffffff, 0x81530000, 0xffff0000 },
- 128, CanHaveMII | HasBrokenTx | FDXOnNoMII},
- {"Winbond W89c840", { 0x08401050, 0xffffffff, },
- 128, CanHaveMII | HasBrokenTx},
- {"Compex RL100-ATX", { 0x201111F6, 0xffffffff,},
- 128, CanHaveMII | HasBrokenTx},
- {NULL,}, /* 0 terminated list. */
+
+static const struct pci_id_info pci_id_tbl[] __devinitdata = {
+ { /* Sometime a Level-One switch card. */
+ "Winbond W89c840", CanHaveMII | HasBrokenTx | FDXOnNoMII},
+ { "Winbond W89c840", CanHaveMII | HasBrokenTx},
+ { "Compex RL100-ATX", CanHaveMII | HasBrokenTx},
+ { } /* terminate list. */
};
/* This driver was written to use PCI memory space, however some x86 systems
@@ -399,7 +396,7 @@ static int __devinit w840_probe1 (struct
#ifdef USE_IO_OPS
bar = 0;
#endif
- ioaddr = pci_iomap(pdev, bar, pci_id_tbl[chip_idx].io_size);
+ ioaddr = pci_iomap(pdev, bar, netdev_res_size);
if (!ioaddr)
goto err_out_free_res;
diff --git a/drivers/net/tulip/xircom_tulip_cb.c b/drivers/net/tulip/xircom_tulip_cb.c
index 887d724..8b5f5d8 100644
--- a/drivers/net/tulip/xircom_tulip_cb.c
+++ b/drivers/net/tulip/xircom_tulip_cb.c
@@ -10,26 +10,11 @@
410 Severn Ave., Suite 210
Annapolis MD 21403
- -----------------------------------------------------------
-
- Linux kernel-specific changes:
-
- LK1.0 (Ion Badulescu)
- - Major cleanup
- - Use 2.4 PCI API
- - Support ethtool
- - Rewrite perfect filter/hash code
- - Use interrupts for media changes
-
- LK1.1 (Ion Badulescu)
- - Disallow negotiation of unsupported full-duplex modes
*/
#define DRV_NAME "xircom_tulip_cb"
-#define DRV_VERSION "0.91+LK1.1"
-#define DRV_RELDATE "October 11, 2001"
-
-#define CARDBUS 1
+#define DRV_VERSION "0.92"
+#define DRV_RELDATE "June 27, 2006"
/* A few user-configurable values. */
@@ -307,10 +292,10 @@ struct xircom_private {
struct xircom_tx_desc tx_ring[TX_RING_SIZE];
/* The saved address of a sent-in-place packet/buffer, for skfree(). */
struct sk_buff* tx_skbuff[TX_RING_SIZE];
-#ifdef CARDBUS
+
/* The X3201-3 requires 4-byte aligned tx bufs */
struct sk_buff* tx_aligned_skbuff[TX_RING_SIZE];
-#endif
+
/* The addresses of receive-in-place skbuffs. */
struct sk_buff* rx_skbuff[RX_RING_SIZE];
u16 setup_frame[PKT_SETUP_SZ / sizeof(u16)]; /* Pseudo-Tx frame to init address table. */
@@ -909,10 +894,8 @@ static void xircom_init_ring(struct net_
tp->tx_skbuff[i] = NULL;
tp->tx_ring[i].status = 0;
tp->tx_ring[i].buffer2 = virt_to_bus(&tp->tx_ring[i+1]);
-#ifdef CARDBUS
if (tp->chip_id == X3201_3)
tp->tx_aligned_skbuff[i] = dev_alloc_skb(PKT_BUF_SZ);
-#endif /* CARDBUS */
}
tp->tx_ring[i-1].buffer2 = virt_to_bus(&tp->tx_ring[0]);
}
@@ -932,12 +915,10 @@ xircom_start_xmit(struct sk_buff *skb, s
entry = tp->cur_tx % TX_RING_SIZE;
tp->tx_skbuff[entry] = skb;
-#ifdef CARDBUS
if (tp->chip_id == X3201_3) {
memcpy(tp->tx_aligned_skbuff[entry]->data,skb->data,skb->len);
tp->tx_ring[entry].buffer1 = virt_to_bus(tp->tx_aligned_skbuff[entry]->data);
} else
-#endif
tp->tx_ring[entry].buffer1 = virt_to_bus(skb->data);
if (tp->cur_tx - tp->dirty_tx < TX_RING_SIZE/2) {/* Typical path */
diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c
index c80a4f1..a16b0d6 100644
--- a/drivers/net/via-rhine.c
+++ b/drivers/net/via-rhine.c
@@ -25,117 +25,13 @@
version. He may or may not be interested in bug reports on this
code. You can find his versions at:
http://www.scyld.com/network/via-rhine.html
-
-
- Linux kernel version history:
-
- LK1.1.0:
- - Jeff Garzik: softnet 'n stuff
-
- LK1.1.1:
- - Justin Guyett: softnet and locking fixes
- - Jeff Garzik: use PCI interface
-
- LK1.1.2:
- - Urban Widmark: minor cleanups, merges from Becker 1.03a/1.04 versions
-
- LK1.1.3:
- - Urban Widmark: use PCI DMA interface (with thanks to the eepro100.c
- code) update "Theory of Operation" with
- softnet/locking changes
- - Dave Miller: PCI DMA and endian fixups
- - Jeff Garzik: MOD_xxx race fixes, updated PCI resource allocation
-
- LK1.1.4:
- - Urban Widmark: fix gcc 2.95.2 problem and
- remove writel's to fixed address 0x7c
-
- LK1.1.5:
- - Urban Widmark: mdio locking, bounce buffer changes
- merges from Beckers 1.05 version
- added netif_running_on/off support
-
- LK1.1.6:
- - Urban Widmark: merges from Beckers 1.08b version (VT6102 + mdio)
- set netif_running_on/off on startup, del_timer_sync
-
- LK1.1.7:
- - Manfred Spraul: added reset into tx_timeout
-
- LK1.1.9:
- - Urban Widmark: merges from Beckers 1.10 version
- (media selection + eeprom reload)
- - David Vrabel: merges from D-Link "1.11" version
- (disable WOL and PME on startup)
-
- LK1.1.10:
- - Manfred Spraul: use "singlecopy" for unaligned buffers
- don't allocate bounce buffers for !ReqTxAlign cards
-
- LK1.1.11:
- - David Woodhouse: Set dev->base_addr before the first time we call
- wait_for_reset(). It's a lot happier that way.
- Free np->tx_bufs only if we actually allocated it.
-
- LK1.1.12:
- - Martin Eriksson: Allow Memory-Mapped IO to be enabled.
-
- LK1.1.13 (jgarzik):
- - Add ethtool support
- - Replace some MII-related magic numbers with constants
-
- LK1.1.14 (Ivan G.):
- - fixes comments for Rhine-III
- - removes W_MAX_TIMEOUT (unused)
- - adds HasDavicomPhy for Rhine-I (basis: linuxfet driver; my card
- is R-I and has Davicom chip, flag is referenced in kernel driver)
- - sends chip_id as a parameter to wait_for_reset since np is not
- initialized on first call
- - changes mmio "else if (chip_id==VT6102)" to "else" so it will work
- for Rhine-III's (documentation says same bit is correct)
- - transmit frame queue message is off by one - fixed
- - adds IntrNormalSummary to "Something Wicked" exclusion list
- so normal interrupts will not trigger the message (src: Donald Becker)
- (Roger Luethi)
- - show confused chip where to continue after Tx error
- - location of collision counter is chip specific
- - allow selecting backoff algorithm (module parameter)
-
- LK1.1.15 (jgarzik):
- - Use new MII lib helper generic_mii_ioctl
-
- LK1.1.16 (Roger Luethi)
- - Etherleak fix
- - Handle Tx buffer underrun
- - Fix bugs in full duplex handling
- - New reset code uses "force reset" cmd on Rhine-II
- - Various clean ups
-
- LK1.1.17 (Roger Luethi)
- - Fix race in via_rhine_start_tx()
- - On errors, wait for Tx engine to turn off before scavenging
- - Handle Tx descriptor write-back race on Rhine-II
- - Force flushing for PCI posted writes
- - More reset code changes
-
- LK1.1.18 (Roger Luethi)
- - No filtering multicast in promisc mode (Edward Peng)
- - Fix for Rhine-I Tx timeouts
-
- LK1.1.19 (Roger Luethi)
- - Increase Tx threshold for unspecified errors
-
- LK1.2.0-2.6 (Roger Luethi)
- - Massive clean-up
- - Rewrite PHY, media handling (remove options, full_duplex, backoff)
- - Fix Tx engine race for good
- - Craig Brind: Zero padded aligned buffers for short packets.
+ [link no longer provides useful info -jgarzik]
*/
#define DRV_NAME "via-rhine"
-#define DRV_VERSION "1.2.0-2.6"
-#define DRV_RELDATE "June-10-2004"
+#define DRV_VERSION "1.4.0"
+#define DRV_RELDATE "June-27-2006"
/* A few user-configurable values.
@@ -356,12 +252,11 @@ enum rhine_quirks {
/* Beware of PCI posted writes */
#define IOSYNC do { ioread8(ioaddr + StationAddr); } while (0)
-static struct pci_device_id rhine_pci_tbl[] =
-{
- {0x1106, 0x3043, PCI_ANY_ID, PCI_ANY_ID, 0, 0, }, /* VT86C100A */
- {0x1106, 0x3065, PCI_ANY_ID, PCI_ANY_ID, 0, 0, }, /* VT6102 */
- {0x1106, 0x3106, PCI_ANY_ID, PCI_ANY_ID, 0, 0, }, /* 6105{,L,LOM} */
- {0x1106, 0x3053, PCI_ANY_ID, PCI_ANY_ID, 0, 0, }, /* VT6105M */
+static const struct pci_device_id rhine_pci_tbl[] = {
+ { 0x1106, 0x3043, PCI_ANY_ID, PCI_ANY_ID, }, /* VT86C100A */
+ { 0x1106, 0x3065, PCI_ANY_ID, PCI_ANY_ID, }, /* VT6102 */
+ { 0x1106, 0x3106, PCI_ANY_ID, PCI_ANY_ID, }, /* 6105{,L,LOM} */
+ { 0x1106, 0x3053, PCI_ANY_ID, PCI_ANY_ID, }, /* VT6105M */
{ } /* terminate list */
};
MODULE_DEVICE_TABLE(pci, rhine_pci_tbl);
diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c
index 09e05fe..7412400 100644
--- a/drivers/net/via-velocity.c
+++ b/drivers/net/via-velocity.c
@@ -231,7 +231,8 @@ static int rx_copybreak = 200;
module_param(rx_copybreak, int, 0644);
MODULE_PARM_DESC(rx_copybreak, "Copy breakpoint for copy-only-tiny-frames");
-static void velocity_init_info(struct pci_dev *pdev, struct velocity_info *vptr, struct velocity_info_tbl *info);
+static void velocity_init_info(struct pci_dev *pdev, struct velocity_info *vptr,
+ const struct velocity_info_tbl *info);
static int velocity_get_pci_info(struct velocity_info *, struct pci_dev *pdev);
static void velocity_print_info(struct velocity_info *vptr);
static int velocity_open(struct net_device *dev);
@@ -296,9 +297,9 @@ #endif /* !CONFIG_PM */
* Internal board variants. At the moment we have only one
*/
-static struct velocity_info_tbl chip_info_table[] = {
- {CHIP_TYPE_VT6110, "VIA Networking Velocity Family Gigabit Ethernet Adapter", 256, 1, 0x00FFFFFFUL},
- {0, NULL}
+static const struct velocity_info_tbl chip_info_table[] __devinitdata = {
+ {CHIP_TYPE_VT6110, "VIA Networking Velocity Family Gigabit Ethernet Adapter", 1, 0x00FFFFFFUL},
+ { }
};
/*
@@ -306,10 +307,9 @@ static struct velocity_info_tbl chip_inf
* device driver. Used for hotplug autoloading.
*/
-static struct pci_device_id velocity_id_table[] __devinitdata = {
- {PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_612X,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, (unsigned long) chip_info_table},
- {0, }
+static const struct pci_device_id velocity_id_table[] __devinitdata = {
+ { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_612X) },
+ { }
};
MODULE_DEVICE_TABLE(pci, velocity_id_table);
@@ -343,7 +343,7 @@ static char __devinit *get_chip_name(enu
static void __devexit velocity_remove1(struct pci_dev *pdev)
{
struct net_device *dev = pci_get_drvdata(pdev);
- struct velocity_info *vptr = dev->priv;
+ struct velocity_info *vptr = netdev_priv(dev);
#ifdef CONFIG_PM
unsigned long flags;
@@ -688,21 +688,23 @@ static int __devinit velocity_found1(str
static int first = 1;
struct net_device *dev;
int i;
- struct velocity_info_tbl *info = (struct velocity_info_tbl *) ent->driver_data;
+ const struct velocity_info_tbl *info = &chip_info_table[ent->driver_data];
struct velocity_info *vptr;
struct mac_regs __iomem * regs;
int ret = -ENOMEM;
+ /* FIXME: this driver, like almost all other ethernet drivers,
+ * can support more than MAX_UNITS.
+ */
if (velocity_nics >= MAX_UNITS) {
- printk(KERN_NOTICE VELOCITY_NAME ": already found %d NICs.\n",
- velocity_nics);
+ dev_printk(KERN_NOTICE, &pdev->dev, "already found %d NICs.\n",
+ velocity_nics);
return -ENODEV;
}
dev = alloc_etherdev(sizeof(struct velocity_info));
-
- if (dev == NULL) {
- printk(KERN_ERR VELOCITY_NAME ": allocate net device failed.\n");
+ if (!dev) {
+ dev_printk(KERN_ERR, &pdev->dev, "allocate net device failed.\n");
goto out;
}
@@ -710,7 +712,7 @@ static int __devinit velocity_found1(str
SET_MODULE_OWNER(dev);
SET_NETDEV_DEV(dev, &pdev->dev);
- vptr = dev->priv;
+ vptr = netdev_priv(dev);
if (first) {
@@ -733,17 +735,17 @@ static int __devinit velocity_found1(str
ret = velocity_get_pci_info(vptr, pdev);
if (ret < 0) {
- printk(KERN_ERR VELOCITY_NAME ": Failed to find PCI device.\n");
+ /* error message already printed */
goto err_disable;
}
ret = pci_request_regions(pdev, VELOCITY_NAME);
if (ret < 0) {
- printk(KERN_ERR VELOCITY_NAME ": Failed to find PCI device.\n");
+ dev_printk(KERN_ERR, &pdev->dev, "No PCI resources.\n");
goto err_disable;
}
- regs = ioremap(vptr->memaddr, vptr->io_size);
+ regs = ioremap(vptr->memaddr, VELOCITY_IO_SIZE);
if (regs == NULL) {
ret = -EIO;
goto err_release_res;
@@ -861,13 +863,14 @@ static void __devinit velocity_print_inf
* discovered.
*/
-static void __devinit velocity_init_info(struct pci_dev *pdev, struct velocity_info *vptr, struct velocity_info_tbl *info)
+static void __devinit velocity_init_info(struct pci_dev *pdev,
+ struct velocity_info *vptr,
+ const struct velocity_info_tbl *info)
{
memset(vptr, 0, sizeof(struct velocity_info));
vptr->pdev = pdev;
vptr->chip_id = info->chip_id;
- vptr->io_size = info->io_size;
vptr->num_txq = info->txqueue;
vptr->multicast_limit = MCAM_SIZE;
spin_lock_init(&vptr->lock);
@@ -885,8 +888,7 @@ static void __devinit velocity_init_info
static int __devinit velocity_get_pci_info(struct velocity_info *vptr, struct pci_dev *pdev)
{
-
- if(pci_read_config_byte(pdev, PCI_REVISION_ID, &vptr->rev_id) < 0)
+ if (pci_read_config_byte(pdev, PCI_REVISION_ID, &vptr->rev_id) < 0)
return -EIO;
pci_set_master(pdev);
@@ -894,24 +896,20 @@ static int __devinit velocity_get_pci_in
vptr->ioaddr = pci_resource_start(pdev, 0);
vptr->memaddr = pci_resource_start(pdev, 1);
- if(!(pci_resource_flags(pdev, 0) & IORESOURCE_IO))
- {
- printk(KERN_ERR "%s: region #0 is not an I/O resource, aborting.\n",
- pci_name(pdev));
+ if (!(pci_resource_flags(pdev, 0) & IORESOURCE_IO)) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "region #0 is not an I/O resource, aborting.\n");
return -EINVAL;
}
- if((pci_resource_flags(pdev, 1) & IORESOURCE_IO))
- {
- printk(KERN_ERR "%s: region #1 is an I/O resource, aborting.\n",
- pci_name(pdev));
+ if ((pci_resource_flags(pdev, 1) & IORESOURCE_IO)) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "region #1 is an I/O resource, aborting.\n");
return -EINVAL;
}
- if(pci_resource_len(pdev, 1) < 256)
- {
- printk(KERN_ERR "%s: region #1 is too small.\n",
- pci_name(pdev));
+ if (pci_resource_len(pdev, 1) < VELOCITY_IO_SIZE) {
+ dev_printk(KERN_ERR, &pdev->dev, "region #1 is too small.\n");
return -EINVAL;
}
vptr->pdev = pdev;
@@ -1730,7 +1728,7 @@ #endif
static int velocity_open(struct net_device *dev)
{
- struct velocity_info *vptr = dev->priv;
+ struct velocity_info *vptr = netdev_priv(dev);
int ret;
vptr->rx_buf_sz = (dev->mtu <= 1504 ? PKT_BUF_SZ : dev->mtu + 32);
@@ -1787,7 +1785,7 @@ err_free_desc_rings:
static int velocity_change_mtu(struct net_device *dev, int new_mtu)
{
- struct velocity_info *vptr = dev->priv;
+ struct velocity_info *vptr = netdev_priv(dev);
unsigned long flags;
int oldmtu = dev->mtu;
int ret = 0;
@@ -1863,7 +1861,7 @@ static void velocity_shutdown(struct vel
static int velocity_close(struct net_device *dev)
{
- struct velocity_info *vptr = dev->priv;
+ struct velocity_info *vptr = netdev_priv(dev);
netif_stop_queue(dev);
velocity_shutdown(vptr);
@@ -1896,7 +1894,7 @@ static int velocity_close(struct net_dev
static int velocity_xmit(struct sk_buff *skb, struct net_device *dev)
{
- struct velocity_info *vptr = dev->priv;
+ struct velocity_info *vptr = netdev_priv(dev);
int qnum = 0;
struct tx_desc *td_ptr;
struct velocity_td_info *tdinfo;
@@ -2051,7 +2049,7 @@ #endif
static int velocity_intr(int irq, void *dev_instance, struct pt_regs *regs)
{
struct net_device *dev = dev_instance;
- struct velocity_info *vptr = dev->priv;
+ struct velocity_info *vptr = netdev_priv(dev);
u32 isr_status;
int max_count = 0;
@@ -2106,7 +2104,7 @@ static int velocity_intr(int irq, void *
static void velocity_set_multi(struct net_device *dev)
{
- struct velocity_info *vptr = dev->priv;
+ struct velocity_info *vptr = netdev_priv(dev);
struct mac_regs __iomem * regs = vptr->mac_regs;
u8 rx_mode;
int i;
@@ -2155,7 +2153,7 @@ static void velocity_set_multi(struct ne
static struct net_device_stats *velocity_get_stats(struct net_device *dev)
{
- struct velocity_info *vptr = dev->priv;
+ struct velocity_info *vptr = netdev_priv(dev);
/* If the hardware is down, don't touch MII */
if(!netif_running(dev))
@@ -2198,7 +2196,7 @@ static struct net_device_stats *velocity
static int velocity_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
{
- struct velocity_info *vptr = dev->priv;
+ struct velocity_info *vptr = netdev_priv(dev);
int ret;
/* If we are asked for information and the device is power
@@ -2827,7 +2825,7 @@ static void enable_flow_control_ability(
static int velocity_ethtool_up(struct net_device *dev)
{
- struct velocity_info *vptr = dev->priv;
+ struct velocity_info *vptr = netdev_priv(dev);
if (!netif_running(dev))
pci_set_power_state(vptr->pdev, PCI_D0);
return 0;
@@ -2843,14 +2841,14 @@ static int velocity_ethtool_up(struct ne
static void velocity_ethtool_down(struct net_device *dev)
{
- struct velocity_info *vptr = dev->priv;
+ struct velocity_info *vptr = netdev_priv(dev);
if (!netif_running(dev))
pci_set_power_state(vptr->pdev, PCI_D3hot);
}
static int velocity_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
- struct velocity_info *vptr = dev->priv;
+ struct velocity_info *vptr = netdev_priv(dev);
struct mac_regs __iomem * regs = vptr->mac_regs;
u32 status;
status = check_connection_type(vptr->mac_regs);
@@ -2875,7 +2873,7 @@ static int velocity_get_settings(struct
static int velocity_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
- struct velocity_info *vptr = dev->priv;
+ struct velocity_info *vptr = netdev_priv(dev);
u32 curr_status;
u32 new_status = 0;
int ret = 0;
@@ -2898,14 +2896,14 @@ static int velocity_set_settings(struct
static u32 velocity_get_link(struct net_device *dev)
{
- struct velocity_info *vptr = dev->priv;
+ struct velocity_info *vptr = netdev_priv(dev);
struct mac_regs __iomem * regs = vptr->mac_regs;
return BYTE_REG_BITS_IS_ON(PHYSR0_LINKGD, ®s->PHYSR0) ? 0 : 1;
}
static void velocity_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
{
- struct velocity_info *vptr = dev->priv;
+ struct velocity_info *vptr = netdev_priv(dev);
strcpy(info->driver, VELOCITY_NAME);
strcpy(info->version, VELOCITY_VERSION);
strcpy(info->bus_info, pci_name(vptr->pdev));
@@ -2913,7 +2911,7 @@ static void velocity_get_drvinfo(struct
static void velocity_ethtool_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
{
- struct velocity_info *vptr = dev->priv;
+ struct velocity_info *vptr = netdev_priv(dev);
wol->supported = WAKE_PHY | WAKE_MAGIC | WAKE_UCAST | WAKE_ARP;
wol->wolopts |= WAKE_MAGIC;
/*
@@ -2929,7 +2927,7 @@ static void velocity_ethtool_get_wol(str
static int velocity_ethtool_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
{
- struct velocity_info *vptr = dev->priv;
+ struct velocity_info *vptr = netdev_priv(dev);
if (!(wol->wolopts & (WAKE_PHY | WAKE_MAGIC | WAKE_UCAST | WAKE_ARP)))
return -EFAULT;
@@ -2994,7 +2992,7 @@ static struct ethtool_ops velocity_ethto
static int velocity_mii_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
{
- struct velocity_info *vptr = dev->priv;
+ struct velocity_info *vptr = netdev_priv(dev);
struct mac_regs __iomem * regs = vptr->mac_regs;
unsigned long flags;
struct mii_ioctl_data *miidata = if_mii(ifr);
diff --git a/drivers/net/via-velocity.h b/drivers/net/via-velocity.h
index f1b2640..496c3d5 100644
--- a/drivers/net/via-velocity.h
+++ b/drivers/net/via-velocity.h
@@ -31,6 +31,8 @@ #define VELOCITY_NAME "via-velo
#define VELOCITY_FULL_DRV_NAM "VIA Networking Velocity Family Gigabit Ethernet Adapter Driver"
#define VELOCITY_VERSION "1.13"
+#define VELOCITY_IO_SIZE 256
+
#define PKT_BUF_SZ 1540
#define MAX_UNITS 8
@@ -1191,7 +1193,6 @@ enum chip_type {
struct velocity_info_tbl {
enum chip_type chip_id;
char *name;
- int io_size;
int txqueue;
u32 flags;
};
@@ -1751,7 +1752,6 @@ struct velocity_info {
struct mac_regs __iomem * mac_regs;
unsigned long memaddr;
unsigned long ioaddr;
- u32 io_size;
u8 rev_id;
diff --git a/drivers/net/yellowfin.c b/drivers/net/yellowfin.c
index 569305f..116636b 100644
--- a/drivers/net/yellowfin.c
+++ b/drivers/net/yellowfin.c
@@ -19,37 +19,13 @@
Support and updates available at
http://www.scyld.com/network/yellowfin.html
+ [link no longer provides useful info -jgarzik]
-
- Linux kernel changelog:
- -----------------------
-
- LK1.1.1 (jgarzik): Port to 2.4 kernel
-
- LK1.1.2 (jgarzik):
- * Merge in becker version 1.05
-
- LK1.1.3 (jgarzik):
- * Various cleanups
- * Update yellowfin_timer to correctly calculate duplex.
- (suggested by Manfred Spraul)
-
- LK1.1.4 ([email protected]):
- * Fix three endian-ness bugs
- * Support dual function SYM53C885E ethernet chip
-
- LK1.1.5 ([email protected]):
- * Fix forced full-duplex bug I introduced
-
- LK1.1.6 ([email protected]):
- * Only print warning on truly "oversized" packets
- * Fix theoretical bug on gigabit cards - return to 1.1.3 behavior
-
*/
#define DRV_NAME "yellowfin"
-#define DRV_VERSION "1.05+LK1.1.6"
-#define DRV_RELDATE "Feb 11, 2002"
+#define DRV_VERSION "2.0"
+#define DRV_RELDATE "Jun 27, 2006"
#define PFX DRV_NAME ": "
@@ -239,8 +215,11 @@ enum capability_flags {
HasMACAddrBug=32, /* Only on early revs. */
DontUseEeprom=64, /* Don't read the MAC from the EEPROm. */
};
+
/* The PCI I/O space extent. */
-#define YELLOWFIN_SIZE 0x100
+enum {
+ YELLOWFIN_SIZE = 0x100,
+};
struct pci_id_info {
const char *name;
@@ -248,16 +227,14 @@ struct pci_id_info {
int pci, pci_mask, subsystem, subsystem_mask;
int revision, revision_mask; /* Only 8 bits. */
} id;
- int io_size; /* Needed for I/O region check or ioremap(). */
int drv_flags; /* Driver use, intended as capability flags. */
};
static const struct pci_id_info pci_id_tbl[] = {
{"Yellowfin G-NIC Gigabit Ethernet", { 0x07021000, 0xffffffff},
- YELLOWFIN_SIZE,
FullTxStatus | IsGigabit | HasMulticastBug | HasMACAddrBug | DontUseEeprom},
{"Symbios SYM83C885", { 0x07011000, 0xffffffff},
- YELLOWFIN_SIZE, HasMII | DontUseEeprom },
+ HasMII | DontUseEeprom },
{ }
};
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
