From: Doug Thompson <[email protected]>
Part 2 of a cleanup of probe1() functions in EDAC
Signed-off-by: Doug Thompson <[email protected]>
---
amd76x_edac.c | 42 ++------------
e752x_edac.c | 164 ++++++---------------------------------------------------
e7xxx_edac.c | 94 ++++----------------------------
i82860_edac.c | 62 +++------------------
i82875p_edac.c | 107 +++----------------------------------
r82600_edac.c | 64 ++--------------------
6 files changed, 65 insertions(+), 468 deletions(-)
Index: linux-2.6.17-rc5/drivers/edac/amd76x_edac.c
===================================================================
--- linux-2.6.17-rc5.orig/drivers/edac/amd76x_edac.c 2006-05-25 11:41:54.000000000
-0600
+++ linux-2.6.17-rc5/drivers/edac/amd76x_edac.c 2006-05-25 11:42:07.000000000 -0600
@@ -225,15 +225,13 @@
*/
static int amd76x_probe1(struct pci_dev *pdev, int dev_idx)
{
- int rc = -ENODEV;
- int index;
- struct mem_ctl_info *mci = NULL;
- enum edac_type ems_modes[] = {
+ static const enum edac_type ems_modes[] = {
EDAC_NONE,
EDAC_EC,
EDAC_SECDED,
EDAC_SECDED
};
+ struct mem_ctl_info *mci = NULL;
u32 ems;
u32 ems_mode;
struct amd76x_error_info discard;
@@ -244,8 +242,7 @@
mci = edac_mc_alloc(0, AMD76X_NR_CSROWS, AMD76X_NR_CHANS);
if (mci == NULL) {
- rc = -ENOMEM;
- goto fail;
+ return -ENOMEM;
}
debugf0("%s(): mci = %p\n", __func__, mci);
@@ -260,33 +257,7 @@
mci->edac_check = amd76x_check;
mci->ctl_page_to_phys = NULL;
- for (index = 0; index < mci->nr_csrows; index++) {
- struct csrow_info *csrow = &mci->csrows[index];
- u32 mba;
- u32 mba_base;
- u32 mba_mask;
- u32 dms;
-
- /* find the DRAM Chip Select Base address and mask */
- pci_read_config_dword(pdev,
- AMD76X_MEM_BASE_ADDR + (index * 4), &mba);
-
- if (!(mba & BIT(0)))
- continue;
-
- mba_base = mba & 0xff800000UL;
- mba_mask = ((mba & 0xff80) << 16) | 0x7fffffUL;
- pci_read_config_dword(pdev, AMD76X_DRAM_MODE_STATUS, &dms);
- csrow->first_page = mba_base >> PAGE_SHIFT;
- csrow->nr_pages = (mba_mask + 1) >> PAGE_SHIFT;
- csrow->last_page = csrow->first_page + csrow->nr_pages - 1;
- csrow->page_mask = mba_mask >> PAGE_SHIFT;
- csrow->grain = csrow->nr_pages << PAGE_SHIFT;
- csrow->mtype = MEM_RDDR;
- csrow->dtype = ((dms >> index) & 0x1) ? DEV_X4 : DEV_UNKNOWN;
- csrow->edac_mode = ems_modes[ems_mode];
- }
-
+ amd76x_init_csrows(mci, pdev, ems_modes[ems_mode]);
amd76x_get_error_info(mci, &discard); /* clear counters */
/* Here we assume that we will never see multiple instances of this
@@ -302,9 +273,8 @@
return 0;
fail:
- if (mci != NULL)
- edac_mc_free(mci);
- return rc;
+ edac_mc_free(mci);
+ return -ENODEV;
}
/* returns count (>= 0), or negative on error */
Index: linux-2.6.17-rc5/drivers/edac/e752x_edac.c
===================================================================
--- linux-2.6.17-rc5.orig/drivers/edac/e752x_edac.c 2006-05-25 11:41:54.000000000
-0600
+++ linux-2.6.17-rc5/drivers/edac/e752x_edac.c 2006-05-25 11:45:25.000000000 -0600
@@ -927,20 +927,12 @@
static int e752x_probe1(struct pci_dev *pdev, int dev_idx)
{
- int rc = -ENODEV;
- int index;
u16 pci_data;
u8 stat8;
- struct mem_ctl_info *mci = NULL;
- struct e752x_pvt *pvt = NULL;
+ struct mem_ctl_info *mci;
+ struct e752x_pvt *pvt;
u16 ddrcsr;
- u32 drc;
int drc_chan; /* Number of channels 0=1chan,1=2chan */
- int drc_drbg; /* DRB granularity 0=64mb, 1=128mb */
- int drc_ddim; /* DRAM Data Integrity Mode 0=none,2=edac */
- u32 dra;
- unsigned long last_cumul_size;
- struct pci_dev *dev = NULL;
struct e752x_error_info discard;
debugf0("%s(): mci\n", __func__);
@@ -954,25 +946,20 @@
if (!force_function_unhide && !(stat8 & (1 << 5))) {
printk(KERN_INFO "Contact your BIOS vendor to see if the "
"E752x error registers can be safely un-hidden\n");
- goto fail;
+ return -ENOMEM;
}
stat8 |= (1 << 5);
pci_write_config_byte(pdev, E752X_DEVPRES1, stat8);
- /* need to find out the number of channels */
- pci_read_config_dword(pdev, E752X_DRC, &drc);
pci_read_config_word(pdev, E752X_DDRCSR, &ddrcsr);
/* FIXME: should check >>12 or 0xf, true for all? */
/* Dual channel = 1, Single channel = 0 */
- drc_chan = (((ddrcsr >> 12) & 3) == 3);
- drc_drbg = drc_chan + 1; /* 128 in dual mode, 64 in single */
- drc_ddim = (drc >> 20) & 0x3;
+ drc_chan = dual_channel_active(ddrcsr);
mci = edac_mc_alloc(sizeof(*pvt), E752X_NR_CSROWS, drc_chan + 1);
if (mci == NULL) {
- rc = -ENOMEM;
- goto fail;
+ return -ENOMEM;
}
debugf3("%s(): init mci\n", __func__);
@@ -987,113 +974,20 @@
debugf3("%s(): init pvt\n", __func__);
pvt = (struct e752x_pvt *) mci->pvt_info;
pvt->dev_info = &e752x_devs[dev_idx];
- pvt->bridge_ck = pci_get_device(PCI_VENDOR_ID_INTEL,
- pvt->dev_info->err_dev,
- pvt->bridge_ck);
-
- if (pvt->bridge_ck == NULL)
- pvt->bridge_ck = pci_scan_single_device(pdev->bus,
- PCI_DEVFN(0, 1));
-
- if (pvt->bridge_ck == NULL) {
- e752x_printk(KERN_ERR, "error reporting device not found:"
- "vendor %x device 0x%x (broken BIOS?)\n",
- PCI_VENDOR_ID_INTEL, e752x_devs[dev_idx].err_dev);
- goto fail;
+ pvt->mc_symmetric = ((ddrcsr & 0x10) != 0);
+
+ if (e752x_get_devs(pdev, dev_idx, pvt)) {
+ edac_mc_free(mci);
+ return -ENODEV;
}
- pvt->mc_symmetric = ((ddrcsr & 0x10) != 0);
debugf3("%s(): more mci init\n", __func__);
mci->ctl_name = pvt->dev_info->ctl_name;
mci->edac_check = e752x_check;
mci->ctl_page_to_phys = ctl_page_to_phys;
- /* find out the device types */
- pci_read_config_dword(pdev, E752X_DRA, &dra);
-
- /*
- * The dram row boundary (DRB) reg values are boundary address for
- * each DRAM row with a granularity of 64 or 128MB (single/dual
- * channel operation). DRB regs are cumulative; therefore DRB7 will
- * contain the total memory contained in all eight rows.
- */
- for (last_cumul_size = index = 0; index < mci->nr_csrows; index++) {
- u8 value;
- u32 cumul_size;
-
- /* mem_dev 0=x8, 1=x4 */
- int mem_dev = (dra >> (index * 4 + 2)) & 0x3;
- struct csrow_info *csrow = &mci->csrows[index];
-
- mem_dev = (mem_dev == 2);
- pci_read_config_byte(pdev, E752X_DRB + index, &value);
- /* convert a 128 or 64 MiB DRB to a page size. */
- cumul_size = value << (25 + drc_drbg - PAGE_SHIFT);
- debugf3("%s(): (%d) cumul_size 0x%x\n", __func__, index,
- cumul_size);
-
- if (cumul_size == last_cumul_size)
- continue; /* not populated */
-
- csrow->first_page = last_cumul_size;
- csrow->last_page = cumul_size - 1;
- csrow->nr_pages = cumul_size - last_cumul_size;
- last_cumul_size = cumul_size;
- csrow->grain = 1 << 12; /* 4KiB - resolution of CELOG */
- csrow->mtype = MEM_RDDR; /* only one type supported */
- csrow->dtype = mem_dev ? DEV_X4 : DEV_X8;
-
- /*
- * if single channel or x8 devices then SECDED
- * if dual channel and x4 then S4ECD4ED
- */
- if (drc_ddim) {
- if (drc_chan && mem_dev) {
- csrow->edac_mode = EDAC_S4ECD4ED;
- mci->edac_cap |= EDAC_FLAG_S4ECD4ED;
- } else {
- csrow->edac_mode = EDAC_SECDED;
- mci->edac_cap |= EDAC_FLAG_SECDED;
- }
- } else
- csrow->edac_mode = EDAC_NONE;
- }
-
- /* Fill in the memory map table */
- {
- u8 value;
- u8 last = 0;
- u8 row = 0;
-
- for (index = 0; index < 8; index += 2) {
- pci_read_config_byte(pdev, E752X_DRB + index, &value);
-
- /* test if there is a dimm in this slot */
- if (value == last) {
- /* no dimm in the slot, so flag it as empty */
- pvt->map[index] = 0xff;
- pvt->map[index + 1] = 0xff;
- } else { /* there is a dimm in the slot */
- pvt->map[index] = row;
- row++;
- last = value;
- /* test the next value to see if the dimm is
- double sided */
- pci_read_config_byte(pdev,
- E752X_DRB + index + 1,
- &value);
- pvt->map[index + 1] = (value == last) ?
- 0xff : /* the dimm is single sided,
- * so flag as empty
- */
- row; /* this is a double sided dimm
- * to save the next row #
- */
- row++;
- last = value;
- }
- }
- }
+ e752x_init_csrows(mci, pdev, ddrcsr);
+ e752x_init_mem_map_table(pdev, pvt);
/* set the map type. 1 = normal, 0 = reversed */
pci_read_config_byte(pdev, E752X_DRM, &stat8);
@@ -1121,21 +1015,7 @@
goto fail;
}
- dev = pci_get_device(PCI_VENDOR_ID_INTEL, e752x_devs[dev_idx].ctl_dev,
- NULL);
- pvt->dev_d0f0 = dev;
- /* find the error reporting device and clear errors */
- dev = pvt->dev_d0f1 = pci_dev_get(pvt->bridge_ck);
- /* Turn off error disable & SMI in case the BIOS turned it on */
- pci_write_config_byte(dev, E752X_HI_ERRMASK, 0x00);
- pci_write_config_byte(dev, E752X_HI_SMICMD, 0x00);
- pci_write_config_word(dev, E752X_SYSBUS_ERRMASK, 0x00);
- pci_write_config_word(dev, E752X_SYSBUS_SMICMD, 0x00);
- pci_write_config_byte(dev, E752X_BUF_ERRMASK, 0x00);
- pci_write_config_byte(dev, E752X_BUF_SMICMD, 0x00);
- pci_write_config_byte(dev, E752X_DRAM_ERRMASK, 0x00);
- pci_write_config_byte(dev, E752X_DRAM_SMICMD, 0x00);
-
+ e752x_init_error_reporting_regs(pvt);
e752x_get_error_info(mci, &discard); /* clear other MCH errors */
/* get this far and it's successful */
@@ -1143,20 +1023,12 @@
return 0;
fail:
- if (mci) {
- if (pvt->dev_d0f0)
- pci_dev_put(pvt->dev_d0f0);
-
- if (pvt->dev_d0f1)
- pci_dev_put(pvt->dev_d0f1);
-
- if (pvt->bridge_ck)
- pci_dev_put(pvt->bridge_ck);
-
- edac_mc_free(mci);
- }
+ pci_dev_put(pvt->dev_d0f0);
+ pci_dev_put(pvt->dev_d0f1);
+ pci_dev_put(pvt->bridge_ck);
+ edac_mc_free(mci);
- return rc;
+ return -ENODEV;
}
/* returns count (>= 0), or negative on error */
Index: linux-2.6.17-rc5/drivers/edac/e7xxx_edac.c
===================================================================
--- linux-2.6.17-rc5.orig/drivers/edac/e7xxx_edac.c 2006-05-25 11:41:54.000000000
-0600
+++ linux-2.6.17-rc5/drivers/edac/e7xxx_edac.c 2006-05-25 11:42:07.000000000 -0600
@@ -411,37 +411,21 @@
static int e7xxx_probe1(struct pci_dev *pdev, int dev_idx)
{
- int rc = -ENODEV;
- int index;
u16 pci_data;
struct mem_ctl_info *mci = NULL;
struct e7xxx_pvt *pvt = NULL;
u32 drc;
- int drc_chan = 1; /* Number of channels 0=1chan,1=2chan */
- int drc_drbg = 1; /* DRB granularity 0=32mb,1=64mb */
- int drc_ddim; /* DRAM Data Integrity Mode 0=none,2=edac */
- u32 dra;
- unsigned long last_cumul_size;
+ int drc_chan;
struct e7xxx_error_info discard;
debugf0("%s(): mci\n", __func__);
-
- /* need to find out the number of channels */
pci_read_config_dword(pdev, E7XXX_DRC, &drc);
- /* only e7501 can be single channel */
- if (dev_idx == E7501) {
- drc_chan = ((drc >> 22) & 0x1);
- drc_drbg = (drc >> 18) & 0x3;
- }
-
- drc_ddim = (drc >> 20) & 0x3;
+ drc_chan = dual_channel_active(drc, dev_idx);
mci = edac_mc_alloc(sizeof(*pvt), E7XXX_NR_CSROWS, drc_chan + 1);
- if (mci == NULL) {
- rc = -ENOMEM;
- goto fail;
- }
+ if (mci == NULL)
+ return -ENOMEM;
debugf3("%s(): init mci\n", __func__);
mci->mtype_cap = MEM_FLAG_RDDR;
@@ -451,7 +435,6 @@
mci->mod_name = EDAC_MOD_STR;
mci->mod_ver = E7XXX_REVISION;
mci->dev = &pdev->dev;
-
debugf3("%s(): init pvt\n", __func__);
pvt = (struct e7xxx_pvt *) mci->pvt_info;
pvt->dev_info = &e7xxx_devs[dev_idx];
@@ -463,65 +446,15 @@
e7xxx_printk(KERN_ERR, "error reporting device not found:"
"vendor %x device 0x%x (broken BIOS?)\n",
PCI_VENDOR_ID_INTEL, e7xxx_devs[dev_idx].err_dev);
- goto fail;
+ goto fail0;
}
debugf3("%s(): more mci init\n", __func__);
mci->ctl_name = pvt->dev_info->ctl_name;
mci->edac_check = e7xxx_check;
mci->ctl_page_to_phys = ctl_page_to_phys;
-
- /* find out the device types */
- pci_read_config_dword(pdev, E7XXX_DRA, &dra);
-
- /*
- * The dram row boundary (DRB) reg values are boundary address
- * for each DRAM row with a granularity of 32 or 64MB (single/dual
- * channel operation). DRB regs are cumulative; therefore DRB7 will
- * contain the total memory contained in all eight rows.
- */
- for (last_cumul_size = index = 0; index < mci->nr_csrows; index++) {
- u8 value;
- u32 cumul_size;
- /* mem_dev 0=x8, 1=x4 */
- int mem_dev = (dra >> (index * 4 + 3)) & 0x1;
- struct csrow_info *csrow = &mci->csrows[index];
-
- pci_read_config_byte(pdev, E7XXX_DRB + index, &value);
- /* convert a 64 or 32 MiB DRB to a page size. */
- cumul_size = value << (25 + drc_drbg - PAGE_SHIFT);
- debugf3("%s(): (%d) cumul_size 0x%x\n", __func__, index,
- cumul_size);
-
- if (cumul_size == last_cumul_size)
- continue; /* not populated */
-
- csrow->first_page = last_cumul_size;
- csrow->last_page = cumul_size - 1;
- csrow->nr_pages = cumul_size - last_cumul_size;
- last_cumul_size = cumul_size;
- csrow->grain = 1 << 12; /* 4KiB - resolution of CELOG */
- csrow->mtype = MEM_RDDR; /* only one type supported */
- csrow->dtype = mem_dev ? DEV_X4 : DEV_X8;
-
- /*
- * if single channel or x8 devices then SECDED
- * if dual channel and x4 then S4ECD4ED
- */
- if (drc_ddim) {
- if (drc_chan && mem_dev) {
- csrow->edac_mode = EDAC_S4ECD4ED;
- mci->edac_cap |= EDAC_FLAG_S4ECD4ED;
- } else {
- csrow->edac_mode = EDAC_SECDED;
- mci->edac_cap |= EDAC_FLAG_SECDED;
- }
- } else
- csrow->edac_mode = EDAC_NONE;
- }
-
+ e7xxx_init_csrows(mci, pdev, dev_idx, drc);
mci->edac_cap |= EDAC_FLAG_NONE;
-
debugf3("%s(): tolm, remapbase, remaplimit\n", __func__);
/* load the top of low memory, remap base, and remap limit vars */
pci_read_config_word(pdev, E7XXX_TOLM, &pci_data);
@@ -542,21 +475,20 @@
*/
if (edac_mc_add_mc(mci,0)) {
debugf3("%s(): failed edac_mc_add_mc()\n", __func__);
- goto fail;
+ goto fail1;
}
/* get this far and it's successful */
debugf3("%s(): success\n", __func__);
return 0;
-fail:
- if (mci != NULL) {
- if(pvt != NULL && pvt->bridge_ck)
- pci_dev_put(pvt->bridge_ck);
- edac_mc_free(mci);
- }
+fail1:
+ pci_dev_put(pvt->bridge_ck);
+
+fail0:
+ edac_mc_free(mci);
- return rc;
+ return -ENODEV;
}
/* returns count (>= 0), or negative on error */
Index: linux-2.6.17-rc5/drivers/edac/i82860_edac.c
===================================================================
--- linux-2.6.17-rc5.orig/drivers/edac/i82860_edac.c 2006-05-25 11:41:54.000000000
-0600
+++ linux-2.6.17-rc5/drivers/edac/i82860_edac.c 2006-05-25 11:42:07.000000000 -0600
@@ -175,14 +175,9 @@
static int i82860_probe1(struct pci_dev *pdev, int dev_idx)
{
- int rc = -ENODEV;
- int index;
- struct mem_ctl_info *mci = NULL;
- unsigned long last_cumul_size;
+ struct mem_ctl_info *mci;
struct i82860_error_info discard;
- u16 mchcfg_ddim; /* DRAM Data Integrity Mode 0=none,2=edac */
-
/* RDRAM has channels but these don't map onto the abstractions that
edac uses.
The device groups from the GRA registers seem to map reasonably
@@ -199,53 +194,15 @@
debugf3("%s(): init mci\n", __func__);
mci->dev = &pdev->dev;
mci->mtype_cap = MEM_FLAG_DDR;
-
mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED;
/* I"m not sure about this but I think that all RDRAM is SECDED */
mci->edac_cap = EDAC_FLAG_SECDED;
- /* adjust FLAGS */
-
mci->mod_name = EDAC_MOD_STR;
mci->mod_ver = I82860_REVISION;
mci->ctl_name = i82860_devs[dev_idx].ctl_name;
mci->edac_check = i82860_check;
mci->ctl_page_to_phys = NULL;
-
- pci_read_config_word(pdev, I82860_MCHCFG, &mchcfg_ddim);
- mchcfg_ddim = mchcfg_ddim & 0x180;
-
- /*
- * The group row boundary (GRA) reg values are boundary address
- * for each DRAM row with a granularity of 16MB. GRA regs are
- * cumulative; therefore GRA15 will contain the total memory contained
- * in all eight rows.
- */
- for (last_cumul_size = index = 0; index < mci->nr_csrows; index++) {
- u16 value;
- u32 cumul_size;
- struct csrow_info *csrow = &mci->csrows[index];
-
- pci_read_config_word(pdev, I82860_GBA + index * 2,
- &value);
-
- cumul_size = (value & I82860_GBA_MASK) <<
- (I82860_GBA_SHIFT - PAGE_SHIFT);
- debugf3("%s(): (%d) cumul_size 0x%x\n", __func__, index,
- cumul_size);
-
- if (cumul_size == last_cumul_size)
- continue; /* not populated */
-
- csrow->first_page = last_cumul_size;
- csrow->last_page = cumul_size - 1;
- csrow->nr_pages = cumul_size - last_cumul_size;
- last_cumul_size = cumul_size;
- csrow->grain = 1 << 12; /* I82860_EAP has 4KiB reolution */
- csrow->mtype = MEM_RMBS;
- csrow->dtype = DEV_UNKNOWN;
- csrow->edac_mode = mchcfg_ddim ? EDAC_SECDED : EDAC_NONE;
- }
-
+ i82860_init_csrows(mci, pdev);
i82860_get_error_info(mci, &discard); /* clear counters */
/* Here we assume that we will never see multiple instances of this
@@ -253,14 +210,17 @@
*/
if (edac_mc_add_mc(mci,0)) {
debugf3("%s(): failed edac_mc_add_mc()\n", __func__);
- edac_mc_free(mci);
- } else {
- /* get this far and it's successful */
- debugf3("%s(): success\n", __func__);
- rc = 0;
+ goto fail;
}
- return rc;
+ /* get this far and it's successful */
+ debugf3("%s(): success\n", __func__);
+
+ return 0;
+
+fail:
+ edac_mc_free(mci);
+ return -ENODEV;
}
/* returns count (>= 0), or negative on error */
Index: linux-2.6.17-rc5/drivers/edac/i82875p_edac.c
===================================================================
--- linux-2.6.17-rc5.orig/drivers/edac/i82875p_edac.c 2006-05-25 11:41:54.000000000
-0600
+++ linux-2.6.17-rc5/drivers/edac/i82875p_edac.c 2006-05-25 11:42:07.000000000 -0600
@@ -385,78 +385,27 @@
static int i82875p_probe1(struct pci_dev *pdev, int dev_idx)
{
int rc = -ENODEV;
- int index;
- struct mem_ctl_info *mci = NULL;
- struct i82875p_pvt *pvt = NULL;
- unsigned long last_cumul_size;
+ struct mem_ctl_info *mci;
+ struct i82875p_pvt *pvt;
struct pci_dev *ovrfl_pdev;
- void __iomem *ovrfl_window = NULL;
+ void __iomem *ovrfl_window;
u32 drc;
- u32 drc_chan; /* Number of channels 0=1chan,1=2chan */
u32 nr_chans;
- u32 drc_ddim; /* DRAM Data Integrity Mode 0=none,2=edac */
struct i82875p_error_info discard;
debugf0("%s()\n", __func__);
ovrfl_pdev = pci_get_device(PCI_VEND_DEV(INTEL, 82875_6), NULL);
- if (!ovrfl_pdev) {
- /*
- * Intel tells BIOS developers to hide device 6 which
- * configures the overflow device access containing
- * the DRBs - this is where we expose device 6.
- * http://www.x86-secret.com/articles/tweak/pat/patsecrets-2.htm
- */
- pci_write_bits8(pdev, 0xf4, 0x2, 0x2);
- ovrfl_pdev =
- pci_scan_single_device(pdev->bus, PCI_DEVFN(6, 0));
-
- if (!ovrfl_pdev)
- return -ENODEV;
- }
-
-#ifdef CONFIG_PROC_FS
- if (!ovrfl_pdev->procent && pci_proc_attach_device(ovrfl_pdev)) {
- i82875p_printk(KERN_ERR,
- "%s(): Failed to attach overflow device\n", __func__);
- return -ENODEV;
- }
-#endif
- /* CONFIG_PROC_FS */
- if (pci_enable_device(ovrfl_pdev)) {
- i82875p_printk(KERN_ERR,
- "%s(): Failed to enable overflow device\n", __func__);
+ if (i82875p_setup_overfl_dev(pdev, &ovrfl_pdev, &ovrfl_window))
return -ENODEV;
- }
-
- if (pci_request_regions(ovrfl_pdev, pci_name(ovrfl_pdev))) {
-#ifdef CORRECT_BIOS
- goto fail0;
-#endif
- }
-
- /* cache is irrelevant for PCI bus reads/writes */
- ovrfl_window = ioremap_nocache(pci_resource_start(ovrfl_pdev, 0),
- pci_resource_len(ovrfl_pdev, 0));
-
- if (!ovrfl_window) {
- i82875p_printk(KERN_ERR, "%s(): Failed to ioremap bar6\n",
- __func__);
- goto fail1;
- }
-
- /* need to find out the number of channels */
drc = readl(ovrfl_window + I82875P_DRC);
- drc_chan = ((drc >> 21) & 0x1);
- nr_chans = drc_chan + 1;
-
- drc_ddim = (drc >> 18) & 0x1;
+ nr_chans = dual_channel_active(drc) + 1;
mci = edac_mc_alloc(sizeof(*pvt), I82875P_NR_CSROWS(nr_chans),
nr_chans);
if (!mci) {
rc = -ENOMEM;
- goto fail2;
+ goto fail0;
}
debugf3("%s(): init mci\n", __func__);
@@ -464,8 +413,6 @@
mci->mtype_cap = MEM_FLAG_DDR;
mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED;
mci->edac_cap = EDAC_FLAG_UNKNOWN;
- /* adjust FLAGS */
-
mci->mod_name = EDAC_MOD_STR;
mci->mod_ver = I82875P_REVISION;
mci->ctl_name = i82875p_devs[dev_idx].ctl_name;
@@ -475,36 +422,7 @@
pvt = (struct i82875p_pvt *) mci->pvt_info;
pvt->ovrfl_pdev = ovrfl_pdev;
pvt->ovrfl_window = ovrfl_window;
-
- /*
- * The dram row boundary (DRB) reg values are boundary address
- * for each DRAM row with a granularity of 32 or 64MB (single/dual
- * channel operation). DRB regs are cumulative; therefore DRB7 will
- * contain the total memory contained in all eight rows.
- */
- for (last_cumul_size = index = 0; index < mci->nr_csrows; index++) {
- u8 value;
- u32 cumul_size;
- struct csrow_info *csrow = &mci->csrows[index];
-
- value = readb(ovrfl_window + I82875P_DRB + index);
- cumul_size = value << (I82875P_DRB_SHIFT - PAGE_SHIFT);
- debugf3("%s(): (%d) cumul_size 0x%x\n", __func__, index,
- cumul_size);
-
- if (cumul_size == last_cumul_size)
- continue; /* not populated */
-
- csrow->first_page = last_cumul_size;
- csrow->last_page = cumul_size - 1;
- csrow->nr_pages = cumul_size - last_cumul_size;
- last_cumul_size = cumul_size;
- csrow->grain = 1 << 12; /* I82875P_EAP has 4KiB reolution */
- csrow->mtype = MEM_DDR;
- csrow->dtype = DEV_UNKNOWN;
- csrow->edac_mode = drc_ddim ? EDAC_SECDED : EDAC_NONE;
- }
-
+ i82875p_init_csrows(mci, pdev, ovrfl_window, drc);
i82875p_get_error_info(mci, &discard); /* clear counters */
/* Here we assume that we will never see multiple instances of this
@@ -512,25 +430,20 @@
*/
if (edac_mc_add_mc(mci,0)) {
debugf3("%s(): failed edac_mc_add_mc()\n", __func__);
- goto fail3;
+ goto fail1;
}
/* get this far and it's successful */
debugf3("%s(): success\n", __func__);
return 0;
-fail3:
+fail1:
edac_mc_free(mci);
-fail2:
+fail0:
iounmap(ovrfl_window);
-
-fail1:
pci_release_regions(ovrfl_pdev);
-#ifdef CORRECT_BIOS
-fail0:
-#endif
pci_disable_device(ovrfl_pdev);
/* NOTE: the ovrfl proc entry and pci_dev are intentionally left */
return rc;
Index: linux-2.6.17-rc5/drivers/edac/r82600_edac.c
===================================================================
--- linux-2.6.17-rc5.orig/drivers/edac/r82600_edac.c 2006-05-25 11:41:54.000000000
-0600
+++ linux-2.6.17-rc5/drivers/edac/r82600_edac.c 2006-05-25 11:42:07.000000000 -0600
@@ -261,23 +261,16 @@
static int r82600_probe1(struct pci_dev *pdev, int dev_idx)
{
- int rc = -ENODEV;
- int index;
- struct mem_ctl_info *mci = NULL;
+ struct mem_ctl_info *mci;
u8 dramcr;
- u32 ecc_on;
- u32 reg_sdram;
u32 eapr;
u32 scrub_disabled;
u32 sdram_refresh_rate;
- u32 row_high_limit_last = 0;
struct r82600_error_info discard;
debugf0("%s()\n", __func__);
pci_read_config_byte(pdev, R82600_DRAMC, &dramcr);
pci_read_config_dword(pdev, R82600_EAP, &eapr);
- ecc_on = dramcr & BIT(5);
- reg_sdram = dramcr & BIT(4);
scrub_disabled = eapr & BIT(31);
sdram_refresh_rate = dramcr & (BIT(0) | BIT(1));
debugf2("%s(): sdram refresh rate = %#0x\n", __func__,
@@ -285,10 +278,8 @@
debugf2("%s(): DRAMC register = %#0x\n", __func__, dramcr);
mci = edac_mc_alloc(0, R82600_NR_CSROWS, R82600_NR_CHANS);
- if (mci == NULL) {
- rc = -ENOMEM;
- goto fail;
- }
+ if (mci == NULL)
+ return -ENOMEM;
debugf0("%s(): mci = %p\n", __func__, mci);
mci->dev = &pdev->dev;
@@ -304,7 +295,7 @@
* is possible. */
mci->edac_cap = EDAC_FLAG_NONE | EDAC_FLAG_EC | EDAC_FLAG_SECDED;
- if (ecc_on) {
+ if (ecc_enabled(dramcr)) {
if (scrub_disabled)
debugf3("%s(): mci = %p - Scrubbing disabled! EAP: "
"%#0x\n", __func__, mci, eapr);
@@ -316,46 +307,7 @@
mci->ctl_name = "R82600";
mci->edac_check = r82600_check;
mci->ctl_page_to_phys = NULL;
-
- for (index = 0; index < mci->nr_csrows; index++) {
- struct csrow_info *csrow = &mci->csrows[index];
- u8 drbar; /* sDram Row Boundry Address Register */
- u32 row_high_limit;
- u32 row_base;
-
- /* find the DRAM Chip Select Base address and mask */
- pci_read_config_byte(pdev, R82600_DRBA + index, &drbar);
-
- debugf1("MC%d: %s() Row=%d DRBA = %#0x\n", mci->mc_idx,
- __func__, index, drbar);
-
- row_high_limit = ((u32) drbar << 24);
-/* row_high_limit = ((u32)drbar << 24) | 0xffffffUL; */
-
- debugf1("MC%d: %s() Row=%d, Boundry Address=%#0x, Last = "
- "%#0x \n", mci->mc_idx, __func__, index,
- row_high_limit, row_high_limit_last);
-
- /* Empty row [p.57] */
- if (row_high_limit == row_high_limit_last)
- continue;
-
- row_base = row_high_limit_last;
- csrow->first_page = row_base >> PAGE_SHIFT;
- csrow->last_page = (row_high_limit >> PAGE_SHIFT) - 1;
- csrow->nr_pages = csrow->last_page - csrow->first_page + 1;
- /* Error address is top 19 bits - so granularity is *
- * 14 bits */
- csrow->grain = 1 << 14;
- csrow->mtype = reg_sdram ? MEM_RDDR : MEM_DDR;
- /* FIXME - check that this is unknowable with this chipset */
- csrow->dtype = DEV_UNKNOWN;
-
- /* Mode is global on 82600 */
- csrow->edac_mode = ecc_on ? EDAC_SECDED : EDAC_NONE;
- row_high_limit_last = row_high_limit;
- }
-
+ r82600_init_csrows(mci, pdev, dramcr);
r82600_get_error_info(mci, &discard); /* clear counters */
/* Here we assume that we will never see multiple instances of this
@@ -378,10 +330,8 @@
return 0;
fail:
- if (mci)
- edac_mc_free(mci);
-
- return rc;
+ edac_mc_free(mci);
+ return -ENODEV;
}
/* returns count (>= 0), or negative on error */
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
