Hi.
I'm having problems with a SATA drive on an ASUS A8V deluxe
motherboard under kernel 2.6.17... In fact it's happened under
every (Vanilla) kernel I've ever run on this server (Back to 2.6.14).
(It's just over a year old. It didn't used to experience the same load
as it does now, so I'm currently assuming it's load related...
The box is a 3GB memory, Barton core AMD64 3200+, with a 30GB IDE (IDE0),
160GB IDE (IDE1) and a 200GB SATA drive.
After anywhere between a few minutes (Rare) and several hundred hours
of uptime, access to filesystems on the SATA drive stop in mid flow
(Almost always under light to heavy load. e.g. watching mythtv from
a saved .mpg on a reiserfs filesystem on an LVM2 volume).
I've tried the SATA drive on two different SATA ports as well. ata0 & ata1.
dmesg shows the following output
ata1: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
ata1: status=0x51 { DriveReady SeekComplete Error }
ata1: error=0x84 { DriveStatusError BadCRC }
ata1: command 0x25 timeout, stat 0xd0 host_stat 0x0
ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
ata1: status=0xd0 { Busy }
sd 0:0:0:0: SCSI error: return code = 0x8000002
sda: Current: sense key=0xb
ASC=0x47 ASCQ=0x0
end_request: I/O error, dev sda, sector 33714288
ATA: abnormal status 0xD0 on port 0xC007
ATA: abnormal status 0xD0 on port 0xC007
ATA: abnormal status 0xD0 on port 0xC007
ata1: command 0x25 timeout, stat 0xd0 host_stat 0x1
ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
ata1: status=0xd0 { Busy }
sd 0:0:0:0: SCSI error: return code = 0x8000002
sda: Current: sense key=0xb
ASC=0x47 ASCQ=0x0
end_request: I/O error, dev sda, sector 33714296
ATA: abnormal status 0xD0 on port 0xC007
ATA: abnormal status 0xD0 on port 0xC007
ATA: abnormal status 0xD0 on port 0xC007
cat'ing /dev/interrupts shows that the IRQ for libata isn't incrementing...
hamish@damned ~/OpenGraphics/primitives $ cat /proc/interrupts
CPU0
0: 171174947 IO-APIC-edge timer
1: 76936 IO-APIC-edge i8042
8: 0 IO-APIC-edge rtc
9: 0 IO-APIC-level acpi
14: 1980221 IO-APIC-edge ide0
15: 308 IO-APIC-edge ide1
177: 2190154 IO-APIC-level libata
185: 2341219 IO-APIC-level VIA8237
193: 83550145 IO-APIC-level sk98lin, cx88[0], cx88[0]
201: 1416971 IO-APIC-level ehci_hcd:usb1, uhci_hcd:usb2, uhci_hcd:usb3, uhci_hcd:usb4, uhci_hcd:usb5
NMI: 150122
LOC: 171177364
ERR: 0
MIS: 0
hamish@damned ~/OpenGraphics/primitives $
libata, & sata_via are compiled as modules
i2c_viapro 8152 0
sata_via 6916 7
libata 51032 1 sata_via
I can't find anything on google... There's no suspend/resume involved. It doesn't appear to be over heating, CPU is at 38degC currently, it was stable as a rock during the heatwave last week at about 50degC, so plenty of leeway there. 1st temp sensor is at 33 degC (According to sensors).
Scaling governor is set to ondemand...
When it fails, sdparm also hangs, but when it's running, sdparm doesn't indicate any logged errors, so it doesn't seem like it's the drive failing...
Othe rinfo follows...
hamish@damned ~ $ cat /proc/iomem
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-bffaffff : System RAM
00100000-003d0983 : Kernel code
003d0984-00511e17 : Kernel data
bffb0000-bffbffff : ACPI Tables
bffc0000-bffeffff : ACPI Non-volatile Storage
bfff0000-bfffffff : reserved
c8000000-cfffffff : 0000:00:00.0
c8000000-cfffffff : aperture
d0000000-f7ffffff : PCI Bus #01
d0000000-dfffffff : 0000:01:00.0
d0000000-dfffffff : radeonfb framebuffer
e0000000-efffffff : 0000:01:00.1
f8000000-f8ffffff : 0000:00:0c.0
f8000000-f8ffffff : cx88[0]
f9000000-f9ffffff : 0000:00:0c.2
f9000000-f9ffffff : cx88[0]
fa000000-faffffff : 0000:00:0c.4
fb900000-fb91ffff : 0000:00:0a.0
fba00000-fba03fff : 0000:00:0a.0
fba00000-fba03fff : sk98lin
fbc00000-fbc000ff : 0000:00:10.4
fbc00000-fbc000ff : ehci_hcd
fbd00000-fbffffff : PCI Bus #01
fbd00000-fbd1ffff : 0000:01:00.0
fbe00000-fbe0ffff : 0000:01:00.0
fbe00000-fbe0ffff : radeonfb mmio
fbf00000-fbf0ffff : 0000:01:00.1
ff780000-ffffffff : reserved
hamish@damned ~ $
hamish@damned ~ $ cat /proc/modules
usblp 11904 0 - Live 0xffffffff882a9000
radeon 112288 0 - Live 0xffffffff8828c000
drm 83240 1 radeon, Live 0xffffffff88276000
snd_pcm_oss 46240 0 - Live 0xffffffff88269000
snd_mixer_oss 14912 1 snd_pcm_oss, Live 0xffffffff88264000
snd_seq_oss 29760 0 - Live 0xffffffff8825b000
snd_seq_midi_event 6848 1 snd_seq_oss, Live 0xffffffff88258000
snd_seq 48544 4 snd_seq_oss,snd_seq_midi_event, Live 0xffffffff8824b000
rfcomm 32360 1 - Live 0xffffffff88242000
l2cap 21512 5 rfcomm, Live 0xffffffff8823b000
hci_usb 14740 0 - Live 0xffffffff88236000
bluetooth 42276 5 rfcomm,l2cap,hci_usb, Live 0xffffffff8822a000
af_key 28244 0 - Live 0xffffffff88222000
xfrm4_tunnel 3336 0 - Live 0xffffffff880de000
ipcomp 6284 0 - Live 0xffffffff8821f000
esp4 6528 0 - Live 0xffffffff8821c000
ah4 5056 0 - Live 0xffffffff88219000
sha512 5248 0 - Live 0xffffffff88216000
sha256 8704 0 - Live 0xffffffff88212000
sha1 2560 0 - Live 0xffffffff8807a000
deflate 3136 0 - Live 0xffffffff88016000
zlib_deflate 19672 1 deflate, Live 0xffffffff8820c000
zlib_inflate 14400 1 deflate, Live 0xffffffff88207000
blowfish 8768 0 - Live 0xffffffff88203000
twofish 38848 0 - Live 0xffffffff881f8000
w83627hf 26128 0 - Live 0xffffffff881f0000
hwmon_vid 2432 1 w83627hf, Live 0xffffffff88011000
i2c_isa 4352 1 w83627hf, Live 0xffffffff881ed000
i2c_dev 9224 0 - Live 0xffffffff881e9000
thermal 20240 0 - Live 0xffffffff881e3000
cpufreq_ondemand 5932 0 - Live 0xffffffff881e0000
powernow_k8 8848 0 - Live 0xffffffff881dc000
processor 34908 2 thermal,powernow_k8, Live 0xffffffff881d2000
ohci1394 29320 0 - Live 0xffffffff881c9000
ieee1394 341688 1 ohci1394, Live 0xffffffff88174000
ohci_hcd 18692 0 - Live 0xffffffff8816e000
dm_mod 46576 7 - Live 0xffffffff88161000
usbhid 32800 0 - Live 0xffffffff88157000
usbmouse 4800 0 - Live 0xffffffff88154000
cx88_blackbird 17008 0 - Live 0xffffffff8814e000
cx8800 28556 1 cx88_blackbird, Live 0xffffffff88146000
cx88_dvb 11012 0 - Live 0xffffffff88142000
compat_ioctl32 7872 1 cx8800, Live 0xffffffff8813f000
cx8802 9924 2 cx88_blackbird,cx88_dvb, Live 0xffffffff8813b000
cx88xx 60452 4 cx88_blackbird,cx8800,cx88_dvb,cx8802, Live 0xffffffff8812b000
v4l1_compat 10820 1 cx8800, Live 0xffffffff88127000
v4l2_common 8320 3 cx88_blackbird,cx8800,compat_ioctl32, Live 0xffffffff88123000
uhci_hcd 29024 0 - Live 0xffffffff88118000
ir_common 8772 1 cx88xx, Live 0xffffffff88114000
ehci_hcd 26696 0 - Live 0xffffffff8810a000
btcx_risc 4232 3 cx8800,cx8802,cx88xx, Live 0xffffffff88107000
tveeprom 15056 1 cx88xx, Live 0xffffffff88102000
usbcore 116968 8 usblp,hci_usb,ohci_hcd,usbhid,usbmouse,uhci_hcd,ehci_hcd, Live 0xffffffff880e4000
videodev 9280 3 cx88_blackbird,cx8800,cx88xx, Live 0xffffffff880e0000
sk98lin 142432 0 - Live 0xffffffff880ba000
cx88_vp3054_i2c 4480 1 cx88_dvb, Live 0xffffffff880b7000
mt352 6212 1 cx88_dvb, Live 0xffffffff880b4000
or51132 9028 1 cx88_dvb, Live 0xffffffff880b0000
video_buf_dvb 5124 1 cx88_dvb, Live 0xffffffff880ad000
dvb_core 75676 1 video_buf_dvb, Live 0xffffffff88099000
video_buf 18308 6 cx88_blackbird,cx8800,cx88_dvb,cx8802,cx88xx,video_buf_dvb, Live 0xffffffff88093000
nxt200x 12868 1 cx88_dvb, Live 0xffffffff8808e000
firmware_class 8960 3 cx88_blackbird,or51132,nxt200x, Live 0xffffffff8808a000
cx24123 8452 1 cx88_dvb, Live 0xffffffff88086000
lgdt330x 7708 1 cx88_dvb, Live 0xffffffff88083000
cx22702 6084 1 cx88_dvb, Live 0xffffffff88080000
dvb_pll 10372 4 cx88_dvb,or51132,nxt200x,cx22702, Live 0xffffffff8807c000
snd_via82xx 24360 1 - Live 0xffffffff88073000
gameport 12432 1 snd_via82xx, Live 0xffffffff8806e000
snd_ac97_codec 97816 1 snd_via82xx, Live 0xffffffff88055000
snd_ac97_bus 2432 1 snd_ac97_codec, Live 0xffffffff88053000
snd_pcm 81484 3 snd_pcm_oss,snd_via82xx,snd_ac97_codec, Live 0xffffffff8803e000
snd_timer 20744 2 snd_seq,snd_pcm, Live 0xffffffff88037000
snd_page_alloc 8592 2 snd_via82xx,snd_pcm, Live 0xffffffff88033000
snd_mpu401_uart 6592 1 snd_via82xx, Live 0xffffffff88030000
snd_rawmidi 21856 1 snd_mpu401_uart, Live 0xffffffff88029000
snd_seq_device 6476 2 snd_seq_oss,snd_rawmidi, Live 0xffffffff88026000
snd 49512 13 snd_pcm_oss,snd_mixer_oss,snd_seq_oss,snd_seq,snd_via82xx,snd_ac97_codec,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device, Live 0xffffffff88018000
i2c_viapro 8152 0 - Live 0xffffffff88013000
sata_via 6916 8 - Live 0xffffffff8800e000
libata 51032 1 sata_via, Live 0xffffffff88000000
hamish@damned ~ $
hamish@damned ~ $ cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 15
model : 31
model name : AMD Athlon(tm) 64 Processor 3200+
stepping : 0
cpu MHz : 2000.000
cache size : 512 KB
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt lm 3dnowext 3dnow lahf_lm
bogomips : 4014.69
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management: ts fid vid ttp
hamish@damned ~ $
hamish@damned ~ $ cat /proc/ioports
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0290-0297 : pnp 00:07
0295-0296 : w83627hf
02f8-02ff : serial
0376-0376 : ide1
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial
0400-0407 : vt596_smbus
0680-06ff : pnp 00:07
0800-0803 : PM1a_EVT_BLK
0804-0805 : PM1a_CNT_BLK
0808-080b : PM_TMR
0810-0815 : ACPI CPU throttle
0820-0823 : GPE0_BLK
0cf8-0cff : PCI conf1
a000-a0ff : 0000:00:0a.0
a000-a0ff : sk98lin
a400-a4ff : 0000:00:0f.0
a400-a4ff : sata_via
a800-a80f : 0000:00:0f.0
a800-a80f : sata_via
b000-b003 : 0000:00:0f.0
b000-b003 : sata_via
b400-b407 : 0000:00:0f.0
b400-b407 : sata_via
b800-b803 : 0000:00:0f.0
b800-b803 : sata_via
c000-c007 : 0000:00:0f.0
c000-c007 : sata_via
c400-c41f : 0000:00:10.0
c400-c41f : uhci_hcd
c800-c81f : 0000:00:10.1
c800-c81f : uhci_hcd
d000-d01f : 0000:00:10.2
d000-d01f : uhci_hcd
d400-d41f : 0000:00:10.3
d400-d41f : uhci_hcd
d800-d8ff : 0000:00:11.5
d800-d8ff : VIA8237
e000-efff : PCI Bus #01
e000-e0ff : 0000:01:00.0
fc00-fc0f : 0000:00:0f.1
fc00-fc07 : ide0
fc08-fc0f : ide1
hamish@damned ~ $
damned ~ # lspci -vvv
00:00.0 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge
Subsystem: ASUSTeK Computer Inc. A8V Deluxe
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 64
Region 0: Memory at c8000000 (32-bit, prefetchable) [size=128M]
Capabilities: [80] AGP version 3.0
Status: RQ=32 Iso- ArqSz=0 Cal=2 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ Rate=x8
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] HyperTransport: Slave or Primary Interface
!!! Possibly incomplete decoding
Command: BaseUnitID=0 UnitCnt=3 MastHost- DefDir-
Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
Link Config 0: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0
Link Config 1: MLWI=8bit MLWO=8bit LWI=8bit LWO=8bit
Revision ID: 1.02
Capabilities: [58] HyperTransport: Interrupt Discovery and Configuration
00:00.1 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:00.2 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:00.3 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:00.4 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:00.7 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 South] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fbd00000-fbffffff
Prefetchable memory behind bridge: d0000000-f7ffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0a.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller (rev 13)
Subsystem: ASUSTeK Computer Inc. Marvell 88E8001 Gigabit Ethernet Controller (Asus)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (5750ns min, 7750ns max), Cache Line Size 08
Interrupt: pin A routed to IRQ 193
Region 0: Memory at fba00000 (32-bit, non-prefetchable) [size=16K]
Region 1: I/O ports at a000 [size=256]
Expansion ROM at fb900000 [disabled] [size=128K]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
00:0c.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder (rev 05)
Subsystem: Hauppauge computer works Inc. Hauppauge Nova-T DVB-T
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (5000ns min, 13750ns max), Cache Line Size 08
Interrupt: pin A routed to IRQ 193
Region 0: Memory at f8000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0c.2 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05)
Subsystem: Hauppauge computer works Inc. Nova-T DVB-T Model 909
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (1500ns min, 22000ns max), Cache Line Size 08
Interrupt: pin A routed to IRQ 193
Region 0: Memory at f9000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0c.4 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [IR Port] (rev 05)
Subsystem: Hauppauge computer works Inc. Nova-T DVB-T Model 909
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (1500ns min, 63750ns max), Cache Line Size 08
Interrupt: pin A routed to IRQ 10
Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)
Subsystem: ASUSTeK Computer Inc. A7V600/K8V Deluxe/K8V-X/A8V Deluxe motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin B routed to IRQ 177
Region 0: I/O ports at c000 [size=8]
Region 1: I/O ports at b800 [size=4]
Region 2: I/O ports at b400 [size=8]
Region 3: I/O ports at b000 [size=4]
Region 4: I/O ports at a800 [size=16]
Region 5: I/O ports at a400 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 177
Region 4: I/O ports at fc00 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size 08
Interrupt: pin A routed to IRQ 201
Region 4: I/O ports at c400 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size 08
Interrupt: pin A routed to IRQ 201
Region 4: I/O ports at c800 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME+
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size 08
Interrupt: pin B routed to IRQ 201
Region 4: I/O ports at d000 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size 08
Interrupt: pin B routed to IRQ 201
Region 4: I/O ports at d400 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size 10
Interrupt: pin C routed to IRQ 201
Region 0: Memory at fbc00000 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South]
Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
Subsystem: ASUSTeK Computer Inc. A8V Deluxe motherboard (Realtek ALC850 codec)
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 185
Region 0: I/O ports at d800 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Capabilities: [80] HyperTransport: Host or Secondary Interface
!!! Possibly incomplete decoding
Command: WarmRst+ DblEnd-
Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
Revision ID: 1.02
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
01:00.0 VGA compatible controller: ATI Technologies Inc M10 NQ [Radeon Mobility 9600] (prog-if 00 [VGA])
Subsystem: PC Partner Limited Unknown device 0200
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min), Cache Line Size 08
Interrupt: pin A routed to IRQ 169
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at e000 [size=256]
Region 2: Memory at fbe00000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at fbd00000 [disabled] [size=128K]
Capabilities: [58] AGP version 3.0
Status: RQ=256 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ Rate=x4,x8
Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW- Rate=<none>
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.1 Display controller: ATI Technologies Inc M10 NQ [Radeon Mobility 9600] (secondary)
Subsystem: PC Partner Limited Unknown device 0201
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min), Cache Line Size 08
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M]
Region 1: Memory at fbf00000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
damned ~ #
damned ~ # cat /proc/locks
1: FLOCK ADVISORY WRITE 8118 03:45:340910 0 EOF
2: FLOCK ADVISORY WRITE 8111 03:45:340853 0 EOF
3: FLOCK ADVISORY WRITE 8117 03:45:340868 0 EOF
4: FLOCK ADVISORY WRITE 8108 03:45:162077 0 EOF
5: FLOCK ADVISORY WRITE 7782 03:0a:145685 0 EOF
5: -> FLOCK ADVISORY WRITE 7702 03:0a:145685 0 EOF
5: -> FLOCK ADVISORY WRITE 7715 03:0a:145685 0 EOF
5: -> FLOCK ADVISORY WRITE 7738 03:0a:145685 0 EOF
6: FLOCK ADVISORY WRITE 8106 03:45:162076 0 EOF
7: FLOCK ADVISORY WRITE 8109 03:45:324581 0 EOF
8: POSIX ADVISORY WRITE 13928 03:0a:86694 0 EOF
9: POSIX ADVISORY WRITE 13928 03:0a:87070 0 EOF
10: POSIX ADVISORY WRITE 13928 03:0a:252476 0 EOF
11: POSIX ADVISORY READ 13928 03:42:757017 0 EOF
12: POSIX ADVISORY READ 13928 03:0a:81870 0 EOF
13: POSIX ADVISORY READ 13928 03:0a:81808 0 EOF
14: POSIX ADVISORY READ 13928 03:42:756690 0 EOF
15: POSIX ADVISORY WRITE 10007 03:08:8036 0 EOF
16: POSIX ADVISORY WRITE 10003 03:0a:251923 0 EOF
17: POSIX ADVISORY READ 10260 03:09:351943 4 4
18: FLOCK ADVISORY WRITE 10455 03:09:192047 0 EOF
19: POSIX ADVISORY READ 10260 03:09:351932 4 4
20: POSIX ADVISORY WRITE 10260 03:09:192039 0 0
21: POSIX ADVISORY READ 10251 03:09:351936 4 4
22: POSIX ADVISORY READ 10251 03:09:351935 4 4
23: POSIX ADVISORY READ 10251 03:09:351934 4 4
24: POSIX ADVISORY READ 10251 03:09:351933 4 4
25: POSIX ADVISORY READ 10251 03:09:351932 4 4
26: POSIX ADVISORY WRITE 10251 03:09:192037 0 0
27: FLOCK ADVISORY WRITE 10186 03:45:340846 0 EOF
28: FLOCK ADVISORY WRITE 9634 03:09:190230 0 EOF
29: FLOCK ADVISORY WRITE 9625 03:09:190227 0 EOF
30: POSIX ADVISORY WRITE 9563 03:09:190223 0 EOF
31: POSIX ADVISORY WRITE 9494 03:09:190219 0 EOF
32: POSIX ADVISORY WRITE 9416 03:09:190162 0 EOF
33: POSIX ADVISORY WRITE 8981 03:09:175418 0 EOF
damned ~ #
damned ~ # cat /proc/stat
cpu 6825000 4024889 702487 56539398 464061 2472 11227 0
cpu0 6825000 4024889 702487 56539398 464061 2472 11227 0
intr 263118976 171413132 80648 0 2 2 0 3 0 0 0 0 0 3 0 1982830 308 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2190154 0 0 0 0 0 0 0 2341219 0 0 0 0 0 0 0 83666088 0 0 0 0 0 0 0 1444587 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
ctxt 511432433
btime 1150408963
processes 1039583
procs_running 2
procs_blocked 4
damned ~ #
A process (ls) that's hung as the status of
damned 7577 # cat status
Name: ls
State: D (disk sleep)
SleepAVG: 88%
Tgid: 7577
Pid: 7577
PPid: 8912
TracerPid: 0
Uid: 1000 1000 1000 1000
Gid: 500 500 500 500
FDSize: 256
Groups: 10 16 18 19 27 35 80 500 10011 10013
VmPeak: 9304 kB
VmSize: 9264 kB
VmLck: 0 kB
VmHWM: 840 kB
VmRSS: 840 kB
VmData: 324 kB
VmStk: 84 kB
VmExe: 84 kB
VmLib: 1544 kB
VmPTE: 32 kB
Threads: 1
SigQ: 1/24573
SigPnd: 0000000000000100
ShdPnd: 0000000000000002
SigBlk: 0000000000000000
SigIgn: 0000000000000000
SigCgt: 0000000180000000
CapInh: 00000000fffffeff
CapPrm: 0000000000000000
CapEff: 0000000000000000
damned 7577 #
damned 7577 # cat wchan
sync_bufferdamned 7577 #
damned 7577 #
damned 7577 #
damned 7577 # cat statm
2316 210 169 21 0 102 0
damned 7577 # cat stat
7577 (ls) D 8912 7577 8912 34817 7577 8388608 332 0 1 0 0 0 0 0 17 0 1 0 68435157 9486336 210 18446744073709551615 4194304 4276732 140737480895040 18446744073709551615 47836358300409 256 0 0 0 18446744071563539454 0 0 17 0 0 0
damned 7577 #
Any ideas?
TIA
Hamish.
Attachment:
pgp0KlrKUmGad.pgp
Description: PGP signature
- Follow-Ups:
- Re: SATA hangs...
- From: Jeff Garzik <[email protected]>
- Re: SATA hangs...
- Prev by Date: Re: Measuring tools - top and interrupts
- Next by Date: Re: [Patch][RFC] Disabling per-tgid stats on task exit in taskstats
- Previous by thread: [patch 0/2] PCI: improve extended config space verification
- Next by thread: Re: SATA hangs...
- Index(es):
 |