Adds Equinox multi-port serial (SST) driver.
Part 7: new header file: drivers/char/eqnx/eqnx.h. Structures and
constants
used by the driver source files.
Signed-off-by: Mike Straub <[email protected]>
---
eqnx.h | 362
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 362 insertions(+)
diff -Naurp -X dontdiff linux-2.6.17/drivers/char/eqnx/eqnx.h
linux-2.6.17.eqnx/drivers/char/eqnx/eqnx.h
--- linux-2.6.17/drivers/char/eqnx/eqnx.h 1969-12-31
19:00:00.000000000 -0500
+++ linux-2.6.17.eqnx/drivers/char/eqnx/eqnx.h 2006-06-20
09:50:06.000000000 -0400
@@ -0,0 +1,362 @@
+/*
+ * Equinox / Avocent SST (multi-port serial) driver.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+/*
+ * Driver structures and definitions
+ */
+
+#define VERSNUM "5.00.00"
+
+/* lanana assigned major number */
+#define EQNX_MAJOR 256
+
+/*
+ * LMX structure (SSP64)
+ * LMX is controller within port modules (providing connectors).
+ * Up to MAXLMX (4) LMXs may be present on a single ICP. Hence
+ * up to MAXLMX (4) LMXs on a SST64 board and up to 2 * MAXLMX (8)
+ * LMXs on a SST128 board.
+ */
+struct lmx_struct {
+ u32 lmx_active; /* status */
+/* LMX status types */
+#define DEV_VIRGIN 0xff /* device id is unknown */
+#define DEV_BAD 0 /* device was known but
now offline */
+#define DEV_GOOD 1 /* device known and online */
+#define DEV_INSANE 2 /* hardware error (unexpected)
*/
+#define DEV_WAITING 3
+
+ u32 lmx_id; /* product id */
+/* LMX product id (partial set) */
+#define LMX_8E_422 0x06 /* ss8-e 422 */
+#define LMX_PM16_422 0x07 /* rm16-rj 422 */
+
+ u32 lmx_speed; /* maxbaud: 0 = 115200, 1 =
230400 */
+ /* 2 = 460800 3 = 921600 */
+ u32 lmx_chan; /* number of channels */
+ u32 lmx_bridge; /* TRUE if bridge, else local */
+ u32 lmx_rmt_active; /* status for remote LMX */
+ u32 lmx_rmt_id; /* remote mux product id */
+ u32 lmx_wait;
+ u32 lmx_good_count;
+ struct mpchan *lmx_mpc; /* first channel mpc */
+};
+
+/*
+ * ICP state structure. One for each ASIC on a board, up to MAXSSP_BRD
+ * ICPs on a single board
+ */
+struct icp_struct {
+ u8 icp_rng_last; /* last ring clock off value */
+ /* TRUE if ring clock OFF */
+ u8 icp_rng_svcreq; /* state for next poll */
+ u8 icp_rng_state; /* ring state */
+/* LMX ring state */
+#define RNG_BAD 0
+#define RNG_GOOD 1
+#define RNG_CHK 2
+#define RNG_WAIT 3
+
+ u32 icp_rng_wait;
+ u32 icp_rng_fail_count; /* ring failure count */
+ u32 icp_rng_good_count; /* ring established count */
+ void *icp_dram_start; /* start of DRAM */
+ void *icp_tags_start; /* start of tags */
+ void *icp_cmds_start; /* start of cmd buffer */
+ void *icp_regs_start; /* start of channel registers */
+ u32 icp_minor_start; /* start minor number for this
icp */
+ struct lmx_struct lmx[MAXLMX]; /* LMX info */
+ u8 icp_poll_defer; /* megapoll processing deferred
*/
+};
+
+/*
+ * ICP queue and buffer information
+ */
+struct hwq_struct {
+ u32 hwq_size; /* queue size (2 per channel) */
+ u32 hwq_hiwat; /* high threshold */
+ u32 hwq_lowat; /* low threshold */
+ u8 hwq_rxwrap;
+ u8 hwq_txwrap;
+ u8 hwq_cmdsize; /* cmd buffer size */
+};
+
+/*
+ * board structure, status and information
+ */
+struct mpdev {
+ u8 mpd_alive; /* board present */
+ u8 mpd_mem_width; /* memory access width */
+ struct pci_dev *mpd_pdev; /* PCI device */
+ struct device *dev; /* device structure */
+ struct brdtab_t *mpd_board_def; /* board definition pointer */
+ u16 mpd_nchan; /* total number of channels */
+ u8 mpd_nicps; /* number of icps on board */
+ u8 mpd_sspchan; /* number of channels on icp */
+ u8 mpd_ccode; /* multimodem country code reg
*/
+ struct mpchan *mpd_mpc; /* mpchan base address */
+ void *mpd_pmem; /* physical memory address */
+ u32 mpd_addrsz; /* physical memory size */
+ void __iomem *mpd_mem; /* virtual address of on-board
memory */
+ u32 mpd_memsz; /* buffer memory size */
+ u32 mpd_minor; /* start minor number for this
board */
+ struct hwq_struct *mpd_hwq; /* queue param ptr */
+ struct icp_struct icp[MAXSSP_BRD];
+ u32 mpd_major; /* major number */
+ u32 mpd_minor_start; /* 1st minor number */
+ u8 mpd_rev; /* board rev */
+ u8 mpd_cnfg_state; /* init state */
+/* configuration state */
+#define CNFG_STATE_OK 0x1
+#define CNFG_STATE_FAIL 0x2
+
+ u8 mpd_cnfg_fail; /* fail reason */
+/* configuration fail reason */
+#define CNFG_FAIL_MEMORY 0x1 /* memory allocation
failed */
+#define CNFG_FAIL_MEM_FAIL 0x2 /* memory test failed */
+#define CNFG_FAIL_PRAM_FAIL 0x3 /* PRAM cached */
+#define CNFG_FAIL_ICP_FAIL 0x4 /* ICP not found */
+#define CNFG_FAIL_MAXBRD 0x5 /* maxbrd exceeded */
+
+ u32 mpd_lmx_index;
+ spinlock_t mpd_lock; /* protection lock */
+};
+
+/*
+ * software copy of icp circular queue (tx and rx)
+ */
+typedef struct {
+ u8 *q_addr; /* virtual base address */
+ u32 q_ptr; /* tail for rx; head for tx */
+ u16 q_begin; /* start index */
+ u16 q_end; /* end index */
+ u16 q_size; /* queue size */
+} queue_t;
+
+/*
+ * channel (port) structure
+ */
+struct mpchan {
+ u32 mpc_flags;
+/* channel flags */
+#define MPC_MODEM 0x2 /* modem control lines in use */
+#define MPC_DIALOUT 0x4 /* line used as dial-out */
+#define MPC_SOFTCAR 0x8 /* disable modem control */
+#define MPC_OPEN 0x20 /* channel open */
+#define MPC_BUSY 0x80 /* output active */
+#define MPC_RXFLUSH 0x200 /* input queue flushed */
+#define MPC_DIALIN 0x2000 /* disconnect on carrier drop */
+#define MPC_CTS 0x4000 /* control in used as
CTSFLOW */
+#define MPC_LOOPBACK 0x80000 /* Port in Internal Loopback */
+#define MPC_DSCOPER 0x100000 /* Port in Datascope Mode for
reads */
+#define MPC_DSCOPEW 0x200000 /* Port in Datascope Mode for
writes*/
+#define MPC_DEFER 0x800000 /* Poll processing deferred */
+
+ u8 mpc_chan; /* channel number on this device
*/
+ u32 mpc_param; /* overwrite parameters */
+/* channel overwrite parameters */
+#define IXONSET 0x1 /* force ixon */
+#define IXANYIG 0x2 /* ignore ixany setup */
+#define IOCTCTS 0x40
+#define IOCTRTS 0x80
+#define IOCTLLB 0x400
+#define IOCTXON 0x800
+#define IOCTLCK 0x1000 /* force lock port
settings */
+
+ volatile struct icp_in_struct *mpc_icpi; /* input registers */
+ volatile struct icp_out_struct *mpc_icpo; /* output registers */
+ volatile struct cin_bnk_struct *mpc_icpb;/* pointer to freezed
bank */
+
+ struct icp_struct *mpc_icp; /* pointer to icp_struct */
+ u16 mpc_cin_events; /* pending input events */
+ u16 mpc_cout_events; /* pending output events */
+ u16 mpc_cin_ena; /* input events enabled */
+ u16 mpc_cout_ena; /* output events enabled */
+ u16 mpc_count; /* pending output */
+ u16 mpc_tx_last_invent; /* chars invented by icp in
opost */
+ u16 mpc_rxbase; /* base tail index */
+ u16 mpc_txbase; /* base index */
+ queue_t mpc_rxq; /* receive queue */
+ queue_t mpc_txq; /* transmit queue */
+ struct mpdev *mpc_mpd; /* pointer to board info
structure */
+ struct tty_struct *mpc_tty; /* pointer to tty structures */
+ u32 mpc_tags;
+ u32 mpc_input; /* counter total chars rcv */
+ u32 mpc_output; /* counter total chars send */
+ u8 mpc_start; /* start output */
+ u8 mpc_stop; /* stop output */
+ u8 mpc_brdno; /* board number */
+ u8 mpc_icpno; /* icp number on the adapter */
+ u8 mpc_lmxno; /* lmx number from the icp */
+ u8 mpc_rxpg; /* select page rx buffer */
+ u8 mpc_txpg; /* select page tx buffer */
+ u8 mpc_tgpg; /* select page tags buffer */
+ int flags; /* linux specific serial flags
*/
+
+ wait_queue_head_t open_wait;
+ wait_queue_head_t close_wait;
+ wait_queue_head_t raw_wait;
+
+ u32 open_wait_wait; /* DCD wait in open */
+
+ u32 refcount; /* open count */
+ struct termios *normaltermios;
+ struct termios *callouttermios;
+ pid_t session;
+ pid_t pgrp;
+ u32 openwaitcnt; /* waiter count in open */
+ u32 close_delay; /* close delay waiting on open
*/
+ u32 closing_wait; /* close delay waiting on drain
*/
+ u32 custom_divisor;
+ u32 baud_base;
+ u32 mpc_block; /* block input */
+ u32 carr_state; /* DCD state */
+ u8 *xmit_buf;
+ u32 xmit_head;
+ u32 xmit_tail;
+ u32 xmit_cnt;
+
+ u32 mpc_parity_err_cnt; /* count of parity errors */
+ u32 mpc_framing_err_cnt; /* count of framing errors */
+ u32 mpc_break_cnt; /* count of breaks */
+
+ u32 mpc_major; /* device major number */
+ u32 mpc_minor; /* device minor number */
+ struct class_device *cdev; /* class device */
+};
+
+/*
+ * pci configuration information
+ */
+struct pci_cfg {
+ u16 command;
+ u8 rev_id;
+ void *base_addr_reg0;
+ struct pci_dev *pdev;
+};
+
+/*
+ * datascope structure
+ */
+#define DSQSIZE (4096) /* datascope buffer size
*/
+#define DSQMASK (4096-1) /* datascope mask */
+
+struct datascope {
+ u32 open; /* data monitor open */
+ u32 chan; /* port number being scoped */
+ u32 status; /* status (for WRAP) */
+#define DSQWRAP 0x01
+ queue_t q; /* Manage circular q buffer */
+ int next;
+ u8 buffer[DSQSIZE]; /* Actual circular buffer */
+
+ wait_queue_head_t scope_wait;
+
+ u32 scope_wait_wait;
+
+};
+
+/*
+ * Layout of a board definition - one for each known + valid board type
+ */
+struct brdtab_t {
+ u8 primary_id; /* primary id */
+ u8 secondary_id; /* id extension */
+ u8 asic; /* asic type */
+ u8 number_of_asics; /* number of asics on board */
+ u8 number_of_ports; /* number of valid ports */
+ u32 flags; /* misc flags */
+ char *name; /* board name */
+};
+
+/*
+ * special ids
+ */
+#define NOID 0
+
+/*
+ * ASIC types
+ */
+#define NOASIC 0
+#define SSP64 1
+#define SSP4 2
+
+/*
+ * flags
+ */
+#define MM 0x2 /* multi-modem board */
+#define POLL40 0x4 /* poll board every 40
milliseconds */
+#define RJ 0x8 /* RJ board (limited
control signals) */
+#define NOPANEL 0x10 /* no panel (SST16) */
+#define DB9_PAN 0x20 /* DB-9 panel (SST16) */
+#define DB25_PAN 0x40 /* DB-25 panel (SST16)
*/
+#define RJ_PAN 0x80 /* RJ panel (SST16) */
+#define LP 0x100 /* low-profile board
(SST-4P) */
+
+/*
+ * miscellaneous defines
+ */
+
+#define EQNX_COOKED 1
+#define EQNX_TXINT 2
+
+#define TURNOFF 0 /* turn this channel off
*/
+#define TURNON 1 /* turn this channel on */
+
+#define LOCK_A 1 /* Bank A lock bit */
+#define LOCK_B 2 /* Bank B lock bit */
+
+#define MPTIMEO ((HZ*10)/1000) /* 10 ms. polling
interval */
+
+#define CLSTIMEO 0 /* change to timeout close drain
*/
+#define EQNX_CLOSEDELAY ((HZ*500)/1000) /* 1/2 second */
+
+#define false 0
+#define true (!false)
+
+#define HWREGSLEN 0x4000 /* 16k register space for each
chan */
+
+#define FLAT128_MEM_LEN 0x200000 /* SSP-64 (128) PCI
memory size */
+#define FLAT64_MEM_LEN 0x100000 /* SSP-64 (64) PCI memory size
*/
+#define FLAT64K_MEM_LEN 0x10000 /* SSP-4 PCI memory size
*/
+
+#define HA_FLAT 0 /* flat memory space */
+#define HA_WIN16 1 /* window memory space (ISA) */
+
+#define MM_COUNTRY_CODE_REG 0x8800
+
+#define MPBOARD(i) ((i) / MAXCHNL_BRD) /* minor device to board
*/
+#define MPCHAN(i) ((i) % MAXCHNL_BRD) /* minor device to
channel */
+
+#ifndef MIN
+#define MIN(a,b) (((a) < (b)) ? (a) : (b))
+#endif
+#ifndef MAX
+#define MAX(a,b) (((a) > (b)) ? (a) : (b))
+#endif
+
+#define XMIT_BUF_SIZE 4096
+
+/*
+ * Memory Space Control bit (bit 1 @ offset 0x04) in I/O Configuration
+ * Space's Command Reg.
+ */
+#define PCI_MSC 0x02
+
+#define PCI_BASE_ADDR_MASK 0xfffffff0
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
