The reset register is automatically cleared when the reset has completed.
Hence, we should busy wait and not have a fixed delay.
Signed-off-by: Pierre Ossman <[email protected]>
---
drivers/mmc/sdhci.c | 21 +++++++++++++++++----
1 files changed, 17 insertions(+), 4 deletions(-)
diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
index b68ca02..d904435 100644
--- a/drivers/mmc/sdhci.c
+++ b/drivers/mmc/sdhci.c
@@ -94,12 +94,27 @@ static void sdhci_dumpregs(struct sdhci_
static void sdhci_reset(struct sdhci_host *host, u8 mask)
{
+ unsigned long timeout;
+
writeb(mask, host->ioaddr + SDHCI_SOFTWARE_RESET);
- if (mask & SDHCI_RESET_ALL) {
+ if (mask & SDHCI_RESET_ALL)
host->clock = 0;
- mdelay(50);
+ /* Wait max 100 ms */
+ timeout = 100;
+
+ /* hw clears the bit when it's done */
+ while (readb(host->ioaddr + SDHCI_SOFTWARE_RESET) & mask) {
+ if (timeout == 0) {
+ printk(KERN_ERR "%s: Reset 0x%x never completed. "
+ "Please report this to " BUGMAIL ".\n",
+ mmc_hostname(host->mmc), (int)mask);
+ sdhci_dumpregs(host);
+ return;
+ }
+ timeout--;
+ mdelay(1);
}
}
@@ -619,9 +634,7 @@ static void sdhci_set_ios(struct mmc_hos
*/
if (ios->power_mode == MMC_POWER_OFF) {
writel(0, host->ioaddr + SDHCI_SIGNAL_ENABLE);
- spin_unlock_irqrestore(&host->lock, flags);
sdhci_init(host);
- spin_lock_irqsave(&host->lock, flags);
}
sdhci_set_clock(host, ios->clock);
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]